ChrisMoody

CM Opening Range-Asia and Europe Session

CM Opening Range Asia AndEurope Sessions

Requested by rayhug1 to use Asia Range of 5pm Est to 2am Est...uses 540 minutes (5pm to 2am Est — 9 Hours) to calculate the Range...then breakouts trigger after 2am

-Ability to change Start and End Times to use any entire session.
---Defaults to 540 minutes (9 hours) but Opening Range Calculation can be changed to 1 hour, 2 hour etc. in Inputs tab

***Known Bug…Currently will NOT Plot accurately the U.S. Session from 0800 to 0759. Will Update Indicator when Fixed.

-Ability to Change the Start and End Times to Accommodate any session.
—Default is 1700 to 1659 (Asian Range)
—Europe Session 0200 to 0159

***All times are based on New York Time or Eastern Standard time … GMT-5

***Times will change based on Daylight Savings Time.

نص برمجي مفتوح المصدر

قام مؤلف هذا النص البرمجي بنشره وجعله مفتوح المصدر، بحيث يمكن للمتداولين فهمه والتحقق منه، وهو الأمر الذي يدخل ضمن قيم TradingView. تحياتنا للمؤلف! يمكنك استخدامه مجانًا، ولكن إعادة استخدام هذا الكود في منشور تحكمه قواعد الموقع. يمكنك جعله مفضلاً لاستخدامه على الرسم البياني.

هل تريد استخدام هذا النص البرمجي على الرسم البياني؟
//Created by ChrisMoody on 9/03/2014
//Requested by rayhug1 to use ENTIRE Asia Range From 5pm Est to 2am Est To Plot Opening Range of Entire 9 hour session...uses 540 minutes (5pm to 2am Est) to calculate the Range...then breakouts trigger after 2am
//Ability to change Start and End Times to use any entire session.  Defaults to 540 minutes (9 hours)  but Opening Range Calculation can be changed to 1 hour etc. in inputs tab
study("_CM_Opening-Range_Asia_Europe Sessions", overlay=true)

sessNum = input(1, minval=0, maxval=2, title="Session to use (0 = 24 Hours, Other Numbers Listed Below)")
desc = input(false, title="Below---Line Plot Start Times and End Times---1 = Asian Session, 2 = Europe Session")
asian_session = input('1700-1659', type=session, title="1 - Asia Session")
europe_session = input('0200-0159', type=session, title="2 - Europe Session")
//us_session = input('0800-0759', type=session, title="3 - U.S. Session")
pt1 = input(5, minval=1, maxval=15, title="Profit Target 1 - Multiple of Opening Range *.1, 5 = .5, 7 = .7, 10 = 1, 15 = 1.5 etc.")
pt2 = input(10, minval=1, maxval=30, title="Profit Target 2 - Multiple of Opening Range *.1, 10 = 1, 15 = 1.5, 18 = 1.8, etc.")
res = input('540', type=resolution, title="Length Of Opening Range-Defaults to 540 Minutes (9 Hours) Select Drop Down Box To Change?")
snp = input(true, title="Plot 1 and 2 When 1st and 2nd Profit Target are Achieved?")

//Session Selection Rules
sessToUse = sessNum == 1 ? asian_session : sessNum == 2 ? europe_session : '0000-0000'

//Session Rules
bartimeSess = (sessNum == 0 ? time('D') : time('D', sessToUse))
fr2to17 = (sessNum == 0 ? time(period) : time(period, sessToUse)) 
newbarSess = bartimeSess != bartimeSess[1]
high_range = valuewhen(newbarSess,high,0)
low_range = valuewhen(newbarSess,low,0)
adopt(r, s) => security(tickerid, r, s)

//Formula For Opening Range
highRes = adopt(res, high_range)
lowRes = adopt(res, low_range)
range = highRes - lowRes

//Highlighting Line Rules For Opening Range
highColor = high > highRes ? lime : yellow
lowColor = low < lowRes ? red : yellow

//Plot Statements For Opening Range Lines
openRangeHigh = plot(fr2to17 > 0 ? highRes : na, color=highColor, style=circles, linewidth=4)
openRangeLow = plot(fr2to17 > 0 ? lowRes : na, color=lowColor, style=circles, linewidth=4)
bgcolor(fr2to17 > 0 ? silver : na, transp=85)
fill(openRangeHigh, openRangeLow, color=silver, transp=70, title="Opening Range Fill")

//Formula For Profit Target 1
pft1 = pt1*.1
highRes2 = highRes+range*pft1
lowRes2 = lowRes-range*pft1

//Highlighting Line rules for Profit Target 1
highColor2 = high > highRes2 ? lime : fuchsia
lowColor2 = low < lowRes2 ? lime : fuchsia

//Plots For Profit Target 1
p1=plot(fr2to17 > 0 ? highRes2 : na, color=highColor2, style=circles, linewidth=4)
p2=plot(fr2to17 > 0 ? lowRes2 : na, color=lowColor2, style=circles, linewidth=4)

//Formula For Profit Target 2
pft2 = pt2*.1
highRes3 = highRes+range*pft2
lowRes3 = lowRes-range*pft2

//Highlighting Line rules for Profit Target 2
highColor3 = high > highRes3 ? lime : aqua
lowColor3 = low < lowRes3 ? lime : aqua

//Plots For Profit Targe 2
plot(fr2to17 > 0 ? highRes3 : na, color=highColor3, style=circles, linewidth=4)
plot(fr2to17 > 0 ? lowRes3 : na, color=lowColor3, style=circles, linewidth=4)

//Rules for when to plot Numbers 1 or 2 When Profit Target 1 or 2 is Reached
pt1UHit = (high >= highRes2  and high[1] < highRes2 and high[2] < highRes2 and high[3] < highRes2 and high[4] < highRes2 and high[5] < highRes2) and fr2to17 > 0 
pt1LHit = (low <= lowRes2  and low[1] > lowRes2 and low[2] > lowRes2 and low[3] > lowRes2 and low[4] > lowRes2 and low[5] > lowRes2) and low > lowRes3 and fr2to17 > 0
pt2UHit = (high >= highRes3  and high[1] < highRes3 and high[2] < highRes3 and high[3] < highRes3 and high[4] < highRes3 and high[5] < highRes3) and fr2to17 > 0 
pt2LHit = (low <= lowRes3  and low[1] > lowRes3 and low[2] > lowRes3 and low[3] > lowRes3 and low[4] > lowRes3 and low[5] > lowRes3) and fr2to17 > 0

//Rules for plotting 1 or 2 When Profit Target 1 or 2 is Reached
plotchar(snp and pt1UHit ? pt1UHit : na, title='UpSide Profit Target 1 Achieved', char='1', location=location.abovebar, color=white, transp=0, offset=0)
plotchar(snp and pt1LHit ? pt1LHit : na, title='DownSide Profit Target 1 Achieved', char='1', location=location.belowbar, color=white, transp=0, offset=0)
plotchar(snp and pt2UHit ? pt2UHit : na, title='UpSide Profit Target 2 Achieved', char='2', location=location.abovebar, color=white, transp=0, offset=0)
plotchar(snp and pt2LHit ? pt2LHit : na, title='DownSide Profit Target 2 Achieved', char='2', location=location.belowbar, color=white, transp=0, offset=0)