ابدأ الآن

ADX

Neural Confluence Engine [Quantum Algo]Neural Confluence Engine Neural Confluence Engine is a Pine Script v6 indicator that fuses eight independent technical factors — momentum, trend, VWAP position, RSI regime, MACD acceleration, ADX trend power, volume confirmation, and squeeze state — into a single weighted directional strength score on a 0–100 scale. Signals are gated by a user-configurable score threshold and an optional higher-timeframe trend filter before firing. The script is open-source. All signals are confirmed on bar close and do not repaint. ═══════════════════════════════════════════════════════════════════════ HOW IT WORKS ═══════════════════════════════════════════════════════════════════════ 1. The eight factor model. Each bar, the engine evaluates eight independent factors and assigns each a normalized score between 0 and 1 based on its current state and intensity. Factors are scored separately for bullish and bearish directions. 2. WaveTrend Momentum (weight 1.5). Computes a custom oscillator from HLC3 smoothed by EMA of channel length (default 9) and signal length (default 12). Oversold reversals below -40 score 1.0; readings above zero score 0.8; positive crossovers below zero score 0.5. 3. EMA Alignment (weight 1.3). Triple EMA stack: fast (default 9) > slow (default 21) > baseline (default 50) scores 1.0 for full alignment. Fast > slow alone scores 0.6. Otherwise 0. 4. VWAP Position (weight 1.0). Price above VWAP by more than 1 ATR scores 1.0. Price above VWAP within 1 ATR scores 0.7. Below VWAP scores 0. 5. RSI Regime (weight 0.8). RSI above 60 scores 1.0. RSI between 50 and 60 scores 0.6. Below 50 scores 0. 6. MACD Histogram (weight 0.8). Rising histogram above zero scores 1.0. Positive but flat histogram scores 0.6. Negative histogram scores 0. 7. ADX Trend Power (weight 0.7). ADX above 40 scores 1.0. ADX between 25 and 40 scores 0.7. ADX below 25 scores 0.3 (penalty for chop, not zero). 8. Volume Confirmation (weight 1.0). Volume above 20-bar SMA combined with a directional candle close scores 1.0. Volume between 80% and 100% of average scores 0.4. Below scores 0. 9. Squeeze State (weight 1.2). Detects Bollinger Band compression inside Keltner Channels using length-20 standard deviation and ATR-10 envelopes. A "firing" bar (compression releases) with positive momentum scores 1.0. Compression without release scores 0.3. 10. Weighted aggregation and smoothing. Each directional factor is multiplied by its weight, summed, divided by total weight, and scaled to 0–100. The raw score is then smoothed with a 3-bar EMA to reduce single-bar noise. Bull score and Bear score are tracked separately. The net Neural Confluence Engine score is the difference between them. ═══════════════════════════════════════════════════════════════════════ SIGNAL TIERS ═══════════════════════════════════════════════════════════════════════ The script produces two signal tiers from the same scoring engine, allowing traders to choose between sensitivity and selectivity. Standard signals (BUY / SELL). Fire on EMA ribbon color change — when the fast EMA crosses the slow EMA. These follow every directional shift regardless of score. Useful for systematic trend-following. High-confluence signals (BUY+ / SELL+). Fire only when three conditions align simultaneously: an EMA cross occurs, the directional score exceeds the user-configurable threshold (default 60), and the higher-timeframe trend agrees with the signal direction. Used to filter for the most aligned setups. Both signal tiers open trade management — entry, stop loss, three take-profit targets, and optional trailing stop after TP1. ═══════════════════════════════════════════════════════════════════════ TRADE MANAGEMENT ═══════════════════════════════════════════════════════════════════════ When a signal fires, the engine computes ATR-scaled risk levels relative to entry: Stop loss: entry minus 1.5 × ATR (configurable multiplier 0.5–10). TP1: 1R target (configurable risk-reward ratio). TP2: 2R target. TP3: 3R target. When TP1 is reached, the stop converts to a trailing structure: SL moves to breakeven, then advances to TP1 level when TP2 is hit, then to TP2 level when TP3 is hit. The trailing stop also follows price at 0.5 × ATR distance after TP1. This can be disabled via the "Activate Trailing SL after TP1" toggle. ═══════════════════════════════════════════════════════════════════════ WHAT'S ACTUALLY DIFFERENT ═══════════════════════════════════════════════════════════════════════ ◆ Eight-factor weighted composite, not a single trigger. Standard indicators fire on one condition — an EMA cross, an RSI level, a volume spike. The Neural Confluence Engine requires multiple independent factors to agree, weights them by historical reliability, and gates signals through a configurable score threshold. The trader can dial sensitivity from 20 (sensitive) to 95 (selective) without re-tuning eight separate sub-indicators. ◆ Two-tier signal architecture. Most indicators produce one stream of signals. This produces two from the same engine: standard ribbon flips for sensitive trend-following, and high-confluence variants gated by score + HTF agreement. Traders can use either tier independently or both in confluence. ◆ HTF agreement is built into the signal gate, not a separate filter. The higher-timeframe trend check is computed natively via request.security, auto-detected based on the chart timeframe (15m → 1H, 1H → 4H, 4H → D, D → W) or set manually. BUY+/SELL+ signals are blocked if HTF disagrees. ◆ Per-factor visibility in the dashboard. Each of the eight factors is individually viewable in real time — traders can see exactly which factors are contributing to the current score, rather than receiving a black-box signal. This is rare in confluence-style indicators which typically hide the sub-components. ◆ Trailing-stop ratcheting tied to TP hits. The trailing stop doesn't just follow ATR — it advances in tiers tied to take-profit milestones. After TP1, stop moves to breakeven. After TP2, to TP1. After TP3, to TP2. This protects profits at structurally meaningful levels rather than purely volatility-derived ones. ═══════════════════════════════════════════════════════════════════════ RECOMMENDED SETTINGS ═══════════════════════════════════════════════════════════════════════ Forex majors (EUR/USD, GBP/USD, USD/JPY) — 1H to 4H: Min Confluence Score 65, HTF Trend Filter on, SL Multiplier 1.5, TP R:R 1/2/3, HTF auto. Optimized for session-driven moves where structural levels respect institutional flow. Crypto perpetuals (BTC, ETH, SOL) — 15M to 1H: Min Confluence Score 60, HTF Trend Filter on, SL Multiplier 2.0, TP R:R 1/2/3, HTF auto. Tuned for 24/7 markets with higher noise floors; the slightly wider stop accommodates increased wick volatility. Gold (XAUUSD) — 1H to 4H: Min Confluence Score 70, HTF Trend Filter on, SL Multiplier 1.8, TP R:R 1/2/3.5, HTF set to Daily. Designed for the elevated wick activity around US session open and the tendency for sharp moves to develop after squeeze release. Indices (SPX, NDX, DAX) — 5M to 1H: Min Confluence Score 55, HTF Trend Filter on, SL Multiplier 1.2, TP R:R 1/2/3, HTF auto. Tuned for cash-session structure and typical post-open momentum continuation. Swing trading (any market) — 4H to Daily: Min Confluence Score 75, HTF Trend Filter on, SL Multiplier 2.5, TP R:R 1.5/3/5, HTF set to Weekly. Reduces noise to the highest-conviction setups only; wider targets to match the higher timeframe. ═══════════════════════════════════════════════════════════════════════ ALERTS & OUTPUTS ═══════════════════════════════════════════════════════════════════════ Alerts available: BUY signal — ribbon flipped bullish (standard sensitivity) SELL signal — ribbon flipped bearish (standard sensitivity) BUY+ signal — high-confluence bullish setup SELL+ signal — high-confluence bearish setup Squeeze breakout — volatility compression released TP1 reached — trailing stop activated TP2 reached TP3 reached On-chart visuals: EMA ribbon (5, 9, 13, 21, 34, 50) with fill bands colored by trend direction VWAP plot with color reflecting price position BUY / SELL / BUY+ / SELL+ signal labels at signal bars Confluence score percentage label on BUY+ / SELL+ bars Optional Entry / SL / TP1 / TP2 / TP3 horizontal lines for the most recent trade TP-hit confirmation labels with checkmarks Squeeze background highlight when compression is active Diamond markers (⚡) on squeeze breakout bars Optional momentum wave background colored by net score intensity Optional candle coloring on signal bars Multi-row dashboard with bull/bear scores, bias classification, HTF direction, factor states, trade status, and threshold setting ═══════════════════════════════════════════════════════════════════════ NOTES ═══════════════════════════════════════════════════════════════════════ Pine Script version: v6. Repainting: All signals (BUY, SELL, BUY+, SELL+, squeeze breakouts, TP/SL hits) are evaluated on confirmed bar close and do not repaint. Higher-timeframe values use lookahead=barmerge.lookahead_off so HTF readings reflect only confirmed information available at signal time. Compatibility: Works on all symbols and timeframes available in TradingView. Tested on forex majors, crypto perpetuals, gold, and major indices. Functions on stocks but the volume confirmation factor may require threshold adjustment for low-volume tickers. Functions on continuous contracts and CFDs. Open-source: This script is open-source. Clone, study, and modify it freely under the terms of TradingView's House Rules. Republishing the source under a different name is not permitted. Credits: This indicator's logic is independently developed. The component oscillators (WaveTrend, RSI, MACD, ADX, Bollinger Bands, Keltner Channels, VWAP) are standard public-domain technical analysis tools. The weighted-score aggregation methodology, two-tier signal architecture, ATR-tiered trailing stop progression, and per-factor dashboard are original implementations. Disclaimer: This indicator is provided for educational and analytical purposes. Trading involves substantial risk of loss. Past performance does not guarantee future results. Position sizing and risk management are the trader's sole responsibility. Nothing in this script or description constitutes financial advice.
مؤشر Pine Script®
من ‎Quantum-Algo‎
ADX Extreme Zones + Divergences [tradeviZion]ADX Extreme Zones + Divergences 📖 Introduction The ADX Extreme Zones + Divergences indicator plots the standard ADX line, highlights extreme readings with a separate colour, and draws optional ADX-versus-price pivot divergences. The study centres on two ideas Larry Williams highlighted as long-term tops and bottoms contexts: very high ADX readings and price/ADX divergences. 📚 Theory Behind The Indicator Larry Williams describes ADX as a measure of trend strength . Two ADX-only behaviours are used as long-term setups in his work: ADX Above 60 Readings above 60 are rare. Larry treats them as a major signal: in declines an ADX > 60 marks an excellent buying area; in rallies it warns that a top is near. The script paints the ADX line in the extreme colour at or above the user-defined level (default 60) and draws a dotted reference line at that level. Divergent Signals on ADX Larry also looks for divergences between price and ADX: new price highs not matched by new ADX highs, or new price lows not matched by new ADX lows. The script offers an optional pivot-based engine that marks regular and hidden ADX divergences vs. price. 🎯 Quick Start Add the indicator to the chart (renders in its own pane). Watch the ADX line for trend strength. When it reaches or crosses the extreme level, the line switches to the extreme colour. Optional dotted/dashed reference lines mark the cutoff (default 40) and the extreme level (default 60). Enable ADX divergences to mark regular bullish/bearish divergences between ADX and price. Hidden divergences are off by default. Use alerts for divergences and for ADX crossing into / out of the extreme zone. ⚙️ Settings The indicator uses 4 settings groups : 1. ADX 2. Levels 3. ADX divergence 4. Display 📋 Group 1: ADX DI length Default: 7 | Min: 1. Smoothing length for +DI / −DI and directional-movement inputs. ADX smoothing Default: 7 | Min: 1. Length for the final ADX RMA stage. Set equal to DI length for the classic single-length DMI; different values let you tune how quickly the ADX line smooths independently of DI. 📋 Group 2: Levels ADX extreme (highlight ≥) Default: 60 | Range: 1-100. ADX line switches to the extreme colour at or above this value. ADX cutoff (line) Default: 40 | Range: 1-100. Optional reference line at the trend cutoff. Show cutoff line / Show extreme line Defaults: On / On. Toggles for the two horizontal reference lines. 📋 Group 3: ADX divergence Show ADX divergences Default: On. Master toggle for the pivot-based divergence engine. Pivot left bars / Pivot right bars Defaults: 5 / 5. Pivot width before a swing is confirmed. Larger right bars = later confirmation, fewer shifts. Min / Max bars between pivots Defaults: 5 / 60. Allowed spacing between consecutive confirmed pivots. Sensitivity % Default: 2.0 | Range: 0.1-10.0. Required separation between pivot legs. Fast pivot confirm Default: On. Forces one-bar right confirmation. Faster, but signals can shift more until the pivot finalizes. Regular bullish / Regular bearish Defaults: On / On. Toggle and recolour each divergence family. Hidden bullish / Hidden bearish Defaults: Off / Off. Optional hidden divergences (price trend continuation context). Divergence line width Default: 2 | Range: 1-4. Divergence label text Colour for the Bull / Bear / H Bull / H Bear labels. 📋 Group 4: Display ADX normal Colour for the ADX line below the extreme level. ADX extreme Colour for the ADX line at or above the extreme level. 🔔 Alerts ADX divergence - regular bullish ADX divergence - regular bearish ADX divergence - hidden bullish ADX divergence - hidden bearish ADX enters extreme zone - ADX crosses up through the extreme level. ADX exits extreme zone - ADX crosses back down through the extreme level. ⚠️ Notes Pivot-based divergences are confirmed after the configured right bars. Marks can shift until the pivot is final. ADX measures trend strength, not direction. The extreme colour only signals that the trend has reached an unusually strong reading. This indicator is for educational and analytical use. It does not provide trading advice. Credits Implements Larry Williams' ADX +60 reading and ADX/price divergence concepts as described in his commodity trading material.
مؤشر Pine Script®
من ‎TradeVizion‎
2
ADX Filtered Average True RangeOverview This indicator combines ATR-based volatility measurement with ADX directional filtering to highlight only those moments when volatility expansion is aligned with confirmed trend momentum. Raw ATR measures how much price moves per bar, but a rising ATR alone says nothing about direction or conviction. By layering an ADX filter on top, the indicator separates meaningful expansion — where volatility is growing in the direction of a strengthening trend — from choppy noise where volatility rises without directional follow-through. The result is a two-signal system displayed in a separate pane: a smoothed ATR line that changes colour only when the trend is directionally confirmed, and a background highlight that activates only when all three conditions align — expanding ATR, a rising directional ADX signal, and a bar that closes in the direction of the trend. This gives traders a compact, at-a-glance read on whether current volatility is actionable or should be ignored. The indicator is designed for swing and intraday traders on instruments with clear trending behaviour, such as NSE:NIFTY , NSE:BANKNIFTY , MCX:CRUDEOIL1! , and major crypto pairs. How It Works ATR is calculated by applying the selected smoothing method to the true range series. A second SWMA pass (smoothed ATR, atrs ) acts as a baseline — when raw ATR rises above atrs and atrs itself is also rising, the indicator treats volatility as actively expanding: atr = ma_function(ta.tr(true), atrlen) atrs = ta.swma(atr) ATRExpanding = (atrs > atrs and atr > atrs) The ADX filter uses Pine's native ta.dmi() to compute DI+, DI−, and raw ADX. A SWMA of ADX ( sadx ) acts as the directional baseline. Bullish ADX is confirmed when sadx is rising, ADX is above sadx , DI+ shows momentum or dominance over DI−, and DI+ is above 15. Bearish ADX mirrors this using DI−: sadx = ta.swma(adx) ADXUp = sadx > sadx and adx > sadx and (diplus > diplus or diplus > diminus) and diplus > 15 ADXDn = sadx > sadx and adx > sadx and (diminus > diminus or diminus > diplus) and diminus > 15 Background highlighting only fires when all three conditions are simultaneously true — expanding volatility, directional ADX confirmation, and a bar closing in the expected direction. Colour key: Dark red line — raw ATR; always visible as the volatility baseline Thick white line — smoothed ATR (SWMA of ATR); the trend-adjusted volatility baseline Green background — ATR expanding + bullish ADX confirmed + bullish bar (close > open) Red background — ATR expanding + bearish ADX confirmed + bearish bar (close < open) No background — ATR contracting, or ADX directional filter not met, or bar indecisive Inputs ATR – Length — Number of bars used to smooth the true range for ATR calculation. Constrained to the Fibonacci sequence for harmonic alignment. Low (e.g. 5): fast, reactive ATR that tracks short-term volatility spikes. High (e.g. 55): slow, structural ATR that filters out minor fluctuations. Default: 13. Smoothing — MA method applied to the true range when computing ATR. RMA (Wilder's moving average) is the industry standard and matches most platform ATR implementations. SWMA is the most responsive with zero lag; VWMA incorporates volume weight. Default: RMA. ADX – Length — Lookback period for the DMI/ADX calculation via ta.dmi() . Low (e.g. 8): ADX responds faster, triggers more frequently but with more false positives. High (e.g. 55): ADX requires sustained directional pressure before confirming. Default: 34. ADX – Smoothing — Smoothing period applied inside ta.dmi() to derive the signal line (lensig). Low (e.g. 1): raw, unsmoothed ADX. High (e.g. 13): heavily smoothed ADX that lags but reduces whipsaws. Default: 3. Usage Notes A green or red background is a confluence signal, not a standalone entry. Use it to confirm setups identified on your primary chart — price action, structure, or another trend tool. When the background is absent despite a strong price move, treat this as a caution flag. Either ATR is contracting (move may be running out of energy) or ADX disagrees with direction (possible counter-trend move). The DI threshold of 15 acts as a minimum directional noise filter. In low-volatility instruments or compressed consolidation phases, ADX rarely satisfies this condition — this is intentional behaviour, not a bug. The Fibonacci-constrained length inputs encourage harmonic consistency across ATR and ADX settings. Consider pairing lengths that share a ratio — for example ATR 13 with ADX 34, or ATR 21 with ADX 55. On shorter timeframes (1m–5m), set ATR Length to 5 or 8 and ADX Length to 13 or 21 for responsive signals. On daily or weekly charts, 34/89 or 55/144 combinations work well. This indicator plots in a separate pane. Keep your price chart uncluttered — the background colour bleeds through to the main chart, providing context without requiring you to watch the pane constantly. Recommended Pairings This indicator pairs well with a trend-following overlay such as a Hull MA, VWAP, or a multi-timeframe EMA ribbon to confirm the broader bias before the background activates. Volume indicators — particularly Volume Delta or On-Balance Volume — add a useful layer of confirmation when the background fires, helping distinguish absorption-driven moves from thin-market noise. For Indian derivative traders, pairing with an open-interest change indicator on NSE:NIFTY or NSE:BANKNIFTY options can sharpen entry timing during background signals.
مؤشر Pine Script®
من ‎jabez4jc‎
Conflux 4 | AnonycryptousConflux 4 | Anonycryptous Description & user manual Why this indicator is different Most signal indicators fire on one condition. Price crosses a moving average. RSI hits a level. A candle closes above a line. One condition. One trigger. And because one condition alone is never enough, the signals come constantly — in trends, against trends, in chop, in news spikes — with no filter for whether the setup actually makes sense. Conflux 4 works differently. It does not fire on one condition. It requires four independent filters to agree at the same moment, in the same direction, before anything appears on the chart. Trend, momentum, volatility structure, and trend strength. All four. If one filter disagrees, nothing is drawn. Not a reduced signal. Nothing. The result is an indicator that is quiet most of the time — and deliberate when it speaks. When a signal does appear, Conflux 4 does not just mark a dot and leave you to figure out the rest. It draws a complete trade block automatically: entry, stop, and up to four take profit levels. The stop trails dynamically after the first target is reached, moving to breakeven and continuing from there. The trade is managed visually until it resolves. The dashboard shows the live state of every filter at all times, so you always know why a signal appeared — or why it did not. Important notice Conflux 4 generates signals based on technical filter alignment. These signals are not financial advice. They do not predict the future. They do not guarantee profitability. All trading decisions are made entirely by the user. Always manage your own risk. Always apply your own judgment. 1. Overview Conflux 4 is a four-filter confluence signal indicator. A signal only fires when all four filters align simultaneously in the same direction. When that happens, a complete trade block is drawn including entry, stop, and take profit levels. What it includes: - Four-filter confluence engine: trend, momentum, volatility structure, and trend strength - Four presets: scalp, daytrader, swing, and manual - Three stop modes: Supertrend trailing, ATR cap, and fixed percentage - Automatic trade block with up to four take profit levels - Dynamic trailing stop that activates after TP1 and moves to breakeven - Live dashboard showing the state of every filter in real time - Configurable signal cooldown, bar coloring, and background shading - Alerts for bullish and bearish signal events 2. The four filters A signal is only valid when all four conditions align. 2.1 Trend filter — VWMA and EMA alignment Price must be above the volume weighted moving average and the fast EMA must be above the slow EMA for a bullish signal. Reverse for bearish. This confirms alignment with the prevailing macro trend before anything else is evaluated. 2.2 Momentum filter — RSI threshold RSI must be above the configured bullish threshold (default 55) for long signals, or below the bearish threshold (default 45) for short signals. This filters out setups forming in low-momentum environments where follow-through is less reliable. 2.3 Volatility filter — Supertrend The Supertrend indicator must confirm the same direction as the trend filter. Because Supertrend adapts to volatility using ATR, it naturally avoids triggering during minor fluctuations and choppy price action. 2.4 Trend strength filter — ADX ADX must be above the configured threshold (default 25) to confirm a directional environment. Below this level, price is typically ranging and confluence signals carry less weight. The ADX filter can be disabled if you prefer to evaluate trend strength manually. If any single filter is not in agreement, no signal is generated. 3. Presets Conflux 4 includes four preset configurations that adjust the stop mode and risk/reward levels to suit different trading styles. -Scalp Designed for short timeframes and futures scalping. Stop mode: ATR cap. Take profit levels: 0.5R / 1.0R / 1.5R / 2.0R. -Daytrader Designed for mid-timeframe trading on 15 minute to 1 hour charts. Stop mode: Supertrend trailing. Take profit levels: 0.5R / 1.0R / 2.0R / 3.0R. -Swing Designed for higher timeframe trading on 4 hour and daily charts. Stop mode: Fixed percentage. Take profit levels: 1.0R / 1.5R / 2.5R / 3.5R. -Manual Full control over all parameters. No preset overrides apply. 4. Stop modes 4.1 Supertrend The stop follows the Supertrend line dynamically for the duration of the trade. This allows the stop to trail price as long as momentum holds. 4.2 ATR cap The stop is based on the Supertrend level but capped at a maximum distance defined by an ATR multiplier. This prevents the stop from becoming too wide in volatile conditions. 4.3 Fixed percentage The stop is placed at a fixed percentage below the entry for long trades and above the entry for short trades. The distance does not change after entry. 5. Trade block logic When a signal fires, the trade block is drawn automatically: - Entry line at the signal bar close - Stop line at the calculated level based on the active stop mode - Up to four take profit lines at configurable risk/reward ratios - Visual zone shading between entry and stop, and between entry and each take profit Trailing behavior: Before TP1 is reached, the stop holds its initial position. After TP1 is reached, the stop moves to breakeven and begins trailing dynamically. The stop only moves in the direction of the trade — it never moves against it. The trade block remains active until the stop is hit or the Supertrend flips direction. After resolution, the block is cleared and the indicator is ready for the next setup. 6. Dashboard The dashboard displays the live state of every filter and the current trade situation. It updates on every bar close. Rows displayed: - Trend — overall direction from VWMA and EMA alignment - VWMA — whether price is above or below the VWMA - EMA — whether the fast EMA is above or below the slow EMA - RSI — current RSI value and whether the momentum threshold is met - Supertrend — current Supertrend direction - ADX — current ADX value and whether the trend strength threshold is met - Confluence — number of filters currently in agreement - Stop mode — active stop mode in use - Last signal — how many bars since the last signal fired - Cooldown — whether the cooldown period is still active - Trade — current trade state: none, long, or short - TP progress — which take profit levels have been reached The dashboard header color reflects the current trend direction. 7. Settings Trend filters - VWMA length: period of the volume weighted moving average used as the primary trend filter - Fast EMA / Slow EMA: periods of the two exponential moving averages used for secondary trend confirmation - Show EMA lines: toggle EMA visibility on the chart - EMA colors and line width: visual styling options Momentum - RSI length: period for the RSI calculation - Bullish threshold: RSI must be above this level for a long signal (default 55) - Bearish threshold: RSI must be below this level for a short signal (default 45) Volatility and Supertrend - ATR length: period for the ATR calculation used by the Supertrend - Supertrend multiplier: sensitivity of the Supertrend — higher values produce fewer flips - Show Supertrend line, fill, and color options ADX - Enable ADX filter: toggle the trend strength requirement on or off - ADX length: period for the ADX calculation - ADX threshold: minimum ADX value required for a signal (default 25) Signal settings - Signal cooldown: minimum number of bars between two signals - Show signals, signal text, background shading, and bar coloring Trade block - Show trade block: toggle the full trade block visualization - Stop mode: Supertrend, ATR cap, or fixed percentage - ATR cap multiplier and fixed percentage stop size - Take profit levels: four configurable RR ratios - Visual styling for stop, entry, and take profit lines Dashboard - Position: top left, top right, bottom left, or bottom right - Size: tiny, small, or normal - Visibility toggle 8. How to use Select a preset or switch to manual and configure the filters to match your trading style and timeframe. Choose a stop mode. Supertrend is best for trending markets where you want the stop to follow price. ATR cap limits the maximum stop size. Fixed percentage suits swing trades where a known maximum loss matters more than trailing. Set your risk/reward take profit levels. Monitor the dashboard. When all four filters align, the confluence count reaches four and a signal fires. The trade block is drawn automatically. A green marker indicates a bullish signal. A red marker indicates a bearish signal. The trade block shows the full setup from entry to each take profit level. Decision-making remains entirely with the user. 9. Notes Low signal frequency is intentional. Four filters aligning simultaneously is a selective condition. Signals will not appear on every bar or even every session. That is by design. Higher timeframes generally produce more stable signals. On lower timeframes the ADX threshold may need to be lowered or disabled to account for faster price structure. Signals are more meaningful when they form at key structural levels such as support, resistance, or liquidity zones. Conflux 4 does not evaluate those levels — that context comes from the trader. The ADX threshold can be adjusted for markets that tend to range. Lowering it increases signal frequency. Raising it makes the filter more selective. 10. Disclaimer This indicator is provided for educational and informational purposes only. All outputs are based on historical price action calculations and do not guarantee future results. Trading financial instruments involves significant risk of loss. Past performance does not indicate future results. Use at your own discretion.
مؤشر Pine Script®
من ‎Anonycryptous‎
Real Strength Scalper Overview A momentum-continuation scalping strategy designed for the 5-minute timeframe. It uses a single custom oscillator — the Real Strength histogram — combined with a dual SMA trend filter to capture confirmed directional moves, while a static percentage stop loss and an adaptive, regime-dependent exit logic manage open trades. Concept and Originality Most momentum oscillators answer either *which direction* or *how strong*, rarely both in a way that requires real conviction. The Real Strength histogram fuses three independent components into one signed value: - Price momentum** — Rate of Change of price over N bars (provides the sign) - Volume confirmation** — current volume divided by its moving average (amplifier) - Trend strength** — ADX scaled around a 20 reference (amplifier) These three are multiplied together (with a small floor to prevent the amplifiers from zeroing out the result on quiet bars) and then smoothed with an EMA. The output is an oscillator where the sign tells direction and the magnitude reflects how much *real* force is behind the move. A high histogram reading requires all three components to align — price moving, volume present, ADX confirming. This composite differs from a standalone ROC, MACD, or volume-weighted oscillator because none of those three on their own require simultaneous confirmation across price, participation, and trend strength. Entry Logic A long entry requires every condition below to be true on the same bar: - Histogram above the positive threshold (default 1.0) - Histogram rising vs. the previous bar (no entries on a fading peak) - ADX above the minimum level (default 14) - DI+ greater than DI− (directional confirmation) - Volume ratio above minimum (default 1.2× average) - *Optional:* Fast SMA above Slow SMA (default 30/60, toggleable) Short entries mirror these conditions on the bearish side. Exit Logic — Regime-Dependent The exit behavior changes based on whether the SMA trend filter still confirms the position. This is the central design choice of the strategy: While SMA still confirms the position: The trade exits only when the histogram crosses through zero into the opposite zone past a defined flip threshold (default ±0.8). This allows winners to ride through pullbacks and consolidations as long as the larger structure (SMA cross) still favors the trade. After SMA reverses against the position: The trade exits on a classic peak-drop rule — if the histogram falls 25% or more from its peak value reached during the trade, the position is closed. This protects open profits when structure breaks down. A hard static stop loss (default 1%) is always active and overrides both exit modes if reached first. A minimum hold of 3 bars prevents premature exits caused by noise immediately after entry. Re-Entry Lock After a stop loss is hit, the strategy refuses to re-enter in the same direction until the histogram returns to (or crosses) zero. This prevents immediately re-entering the same momentum that just stopped the previous trade out — a common cause of consecutive losses on choppy bars. Settings Guide - Strength threshold (1.0):** minimum histogram magnitude required for entry. Lower values produce more trades; higher values are more selective. - Min ADX (14):** filters out low-trending environments. - Volume Ratio (1.2):** requires above-average participation on the entry bar. - SMA Fast / Slow (30 / 60):** trend regime filter; can be disabled to compare baseline performance. - Stop Loss % (1.0):** static distance from entry. Adjust per instrument volatility. - Peak drop % (25):** how much the histogram must fall from peak to trigger peak-exit. - Flip exit threshold (0.8):** how far the histogram must travel into the opposite zone to trigger flip-exit. - Min bars before peak/flip (3):** protects against same-bar noise exits. Default Properties and Backtesting Realism - Initial capital: 100,000 - Position size: 3% of equity per trade - Commission: 0.04% - Slippage: 3 ticks - Process orders on close: true - No pyramiding These defaults reflect realistic crypto futures conditions. Users trading other instruments or venues should adjust commission and slippage to match their broker. Intended Use - Built and validated on the 5-minute timeframe - Best suited for liquid markets with consistent volume profile - One position at a time, both long and short - Re-tune thresholds per instrument; defaults are starting points, not optimal values for every market Notes Past performance does not guarantee future results. Backtest outcomes depend strongly on the chosen instrument, time range, and parameter settings. This strategy is published as an educational tool to demonstrate a composite-momentum approach with regime-dependent exits — not as a turnkey trading system. Always test with your own data and risk parameters before any live use.
استراتيجية Pine Script®
من ‎wielkieef‎
2
ADX/DI Histogram [MTF Advanced] Institutional Trend Clarity — Without Indicator Overload Most traders use ADX to measure strength… But strength alone doesn’t tell you when a move is actually tradable. This indicator transforms classic ADX/DI into a multi-timeframe alignment engine, giving you a clean, real-time view of: • Trend direction • Trend strength • Participation across timeframes • Market structure quality All in one minimal, high-clarity dashboard. WHAT MAKES THIS DIFFERENT This is not just another ADX. It answers a deeper question: Is the trend actually supported across timeframes—or is it fragile? By combining: • ADX (strength) • DI bias (direction) • Multi-timeframe stacking • Participation modeling (PWR) You get a true structure-based trend read, not just a number. CORE FEATURES MTF ALIGNMENT DASHBOARD Instantly see alignment across three timeframes: • Direction (▲ / ▼) • ADX strength • Participation (● ◑ ○) No chart clutter. No guesswork. SMART MARKET STATE CLASSIFICATION Instead of vague signals, the indicator classifies the environment into clear states: FULL BULL / FULL BEAR Strong, aligned trend across all timeframes Best conditions for continuation trades BUILDING BULL / BUILDING BEAR Trend is developing from lower to higher timeframes Early-stage momentum (often best risk/reward) WEAK BULL / WEAK BEAR Direction agrees, but lacks participation Lower conviction / prone to failure MIXED Conflicting structure or broken alignment Chop / avoid conditions PARTICIPATION (PWR) SYSTEM Each timeframe is graded visually: ● Strong participation (ADX above threshold) ◑ Building participation ○ Weak / inactive This allows you to instantly see whether momentum is: • Expanding • Stalling • Failing ADX/DI HISTOGRAM (ENHANCED) • Clean directional bias histogram • Strength-weighted coloring • Optional ADX overlay • Built for clarity, not noise SMART ALERTS (NON-SPAM) Built-in alert system triggers only on state changes: • FULL BULL / BEAR confirmed • BUILDING trend emerging • WEAK conditions detected • MIXED environments Includes: • Strict Mode (alerts only on FULL alignment) • Clean, readable alert labels HOW TO USE Trend Traders Focus on FULL BULL / BEAR Use BUILDING as early entry opportunities Intraday / Scalpers Exploit BUILDING phases Avoid WEAK and MIXED environments Risk Management Use PWR dots to confirm participation before committing size WHY IT MATTERS Most indicators tell you something is happening. This tells you if the move is actually worth trading. DESIGNED FOR • Futures traders • Intraday and swing traders • Multi-timeframe analysts • Traders who want clarity without clutter FINAL THOUGHT This tool won’t predict the market. But it will help you stop trading weak environments and focus only on structurally sound moves.
مؤشر Pine Script®
من ‎Legacy_Money‎
CHOP Filter (ADX + Choppiness Index) CHOP Filter (ADX + Choppiness Index Hybrid Indicator) This indicator is designed to improve decision-making by filtering out choppy environments that traditional ADX-based systems may still misinterpret as valid trends. It is best used to filter and confirm your usual entry signals from other indicators or strategies, improving their probability of success. Green → Strong trend (ADX above threshold + low choppiness → clean trending conditions) Yellow → Strong ADX but high choppiness (possible unstable or transitional trend) Red → Weak trend / ranging market (low ADX + high choppiness index) The CHOP Filter is a custom volatility and trend-strength indicator that combines the Average Directional Index (ADX) with a simplified Choppiness Index (CHOP) logic to better distinguish between trending and ranging market conditions. This hybrid approach was developed after observing a common issue in trading: even when the ADX shows relatively strong values, the market can remains choppy and produce unreliable trend signals. On the other hand, using the Choppiness Index alone was not sufficient either, as it does not consistently confirm actionable trend strength. By combining both concepts, this indicator aims to provide a more reliable market filter. The indicator is based on two well-known tools: The ADX (Average Directional Index) was originally developed by J. Welles Wilder to measure trend strength. The Choppiness Index was created by E.W. Dreiss to determine whether the market is trending or ranging. The indicator plots only the ADX line, but dynamically adjusts its color based on both trend strength and market structure: How to Use: - Focus on green phases for high-probability trend trading setups - Be cautious during yellow phases, as trends may be unstable or deceptive - Avoid trend-following strategies during red phases, where markets are likely ranging
مؤشر Pine Script®
من ‎hedge2‎
Trend Entry Verifier [AITD]🎯 Trend Entry Verifier — Lock On Before You Pull The Trigger   Stop pulling the trigger when the target isn't locked. Most traders fire on partial intel — a trendline here, an RSI hint there — and wonder why their stops keep getting hit. Trend Entry Verifier runs a 3-stage clearance check on every bar. No clearance, no shot. When all three lights turn green, you move with confidence.   🛡️ The 3-Stage Clearance Check: Trend (HMA 13/34) — fast Hull moving averages confirm the field of engagement Momentum (RSI) — pressure check; RSI above 50 = bulls advancing, below 50 = bears advancing Strength (ADX + DMI) — power check; ADX above 22 means the move has real force, DI+/DI- confirms who's actually winning  ✅ GO only fires when all three clear. Anything less = NO-GO. Stand down. The market has to prove itself before you risk capital.   💔 The Pain This Eliminates:  You know the feeling. You see a "clean" move, jump in, and the market immediately turns into a chop-fest that eats your stop. Or worse — the trend you trusted was actually weak, and you're holding a bag while everyone else exits.   Most losing trades aren't direction errors. They're timing errors — entering when the field hasn't been cleared. TEV refuses to let you fire on weak intel.   🎯 The Confidence This Builds:  When the ribbon flashes bright and the table says GO, you know three independent systems agreed. Not a guess. Not a gut feel. A verified clearance. You enter with conviction, hold with discipline, and exit when the system tells you the field has changed.   🪖 Mission Brief — How To Use It: 🟢 GO + BULLISH → field is clear; favor pullback entries or continuation breakouts 🔴 GO + BEARISH → field is clear; favor rejection entries or breakdown setups ⚫ NO-GO → conditions mixed, weak, or in transition; stand down or scale back ⚪ MIXED trend → trend and momentum disagree; do NOT engage, wait for alignment 🚨 The Visual Ribbon — Your Threat Indicator: The ribbon at zero shows direction at a glance. When GO conditions clear, the ribbon brightens and thickens — your weapon is hot. When NO-GO, it dims back down. No squinting. No second-guessing. Bright = engage. Dim = stand down.   ⚠️ Bonus Threat Markers: 🟧 Orange "R" triangles — RSI hit an extreme (above 70 or below 30); enemy is overextended, don't chase 🟧 Orange "B" triangles — price pierced a Bollinger Band; exhaustion zone, watch for reversal These flag overextension so you don't engage a stretched target. Why This Hits Different: 🎯 No mystery readings — every state has a clear name and a clear job 🛡️ Conservative by design — NO-GO is the default; you earn the GO 🧹 Single-pane simplicity — one ribbon, one table, one decision per bar 📚 Educational by nature — the table teaches you what to look for, not just what to do 🚫 Built For Traders Who Are Tired Of: Entering on "looks like a trend" only to get ambushed Stacking 4 indicators to confirm what one should Tools that fire during obvious chop Indicators that look pretty but never tell you when to stay out One ribbon. One table. One decision. Lock on or stand down. Defaults: HMA 13/34, RSI 14, DMI 14/14, ADX minimum 22 — fully customizable. Pairs well with VWRSI Crossovers & Extremes — TEV clears the field. VWRSI calls the shot. Use them together for a full recon → engage workflow.   🎯 Built by The AI Trading Desk.
مؤشر Pine Script®
من ‎TheAITradingDesk‎
1
Trend Strength Meter [AGPro Series]Trend Strength Meter ⚡ OVERVIEW Trend Strength Meter is a multi-factor composite oscillator that quantifies how strong a directional trend actually is, on a single 0-to-100 score. It merges five independent trend dimensions (ADX, slope angle, momentum ROC, moving-average alignment, and pullback depth) into one weighted reading, then classifies the market into three clear states: Strong Trend (80+), Mild Trend (50-80), and Weak / Range (<50). The goal is to give a trader the answer to one of the most common daily questions in technical analysis: "Is the trend strong enough to act on right now, or is it fading?" The indicator is built for discretionary and systematic traders who want a single, normalized number instead of reading half a dozen separate trend tools. It is scale-invariant (ATR-normalized) and works across timeframes and instruments. 🎯 UNIQUE EDGE Trend-strength tools usually give a single-factor reading (for example, ADX alone) which can be misleading. ADX can be high during range contractions, slopes can spike during noise, MA stacks can be aligned while price sits deep in pullback. This indicator fuses all five dimensions so that no single factor can dominate the score without confirmation from the others. Three design choices set it apart: 1. Weighted multi-factor composite. Every factor is independently normalized to 0-100, then combined with user-adjustable weights that auto-normalize. A Strong reading therefore requires broad agreement across independent trend dimensions, not just one signal firing. 2. Dominant Factor readout. The information panel shows which of the five factors is contributing most to the current score, so the trader understands why the score is where it is. A score of 84 driven by ADX and a score of 84 driven by Alignment are structurally different markets, and the readout makes that visible. 3. Historical context built in. The panel exposes Historical Max Score over a configurable lookback window, and Strong-Trend Duration (how many bars the score has held above the Strong threshold). Both of these help gauge trend maturity and exhaustion risk. 📊 METHODOLOGY The composite score is built from five independently scored factors, each normalized to 0-100: • Factor 1 — ADX. Directional movement strength from the standard DMI/ADX system, linearly mapped so that ADX = 60 maps to a score of 100. • Factor 2 — Slope Angle. The slope of an EMA over its length window, normalized by ATR to be scale-invariant, then converted to a 0-100 score via an arctangent curve. High slope in either direction yields a high score. • Factor 3 — Momentum ROC. Rate of Change normalized by ATR and converted to a bounded 0-100 value. Captures impulse magnitude independent of price scale. • Factor 4 — MA Alignment. Stacked EMA alignment across Fast / Mid / Slow timeframes, plus price position relative to the fast MA. Full bullish or bearish stack yields 100; partial stacks are scored proportionally (70, 40, or 15). • Factor 5 — Pullback Depth. Distance from the nearest recent extreme (highest high or lowest low over lookback) measured in ATR units. Shallow pullback = strong trend = high score. Each factor is multiplied by its weight, summed, and divided by total weight to produce the final 0-100 score. All five weights are independently adjustable and auto-normalize, so changing one weight does not force manual rebalancing of the others. Directional bias (Bull / Bear / Range) is determined by the combination of DMI crossover state and close-vs-mid-MA position. State color shifts between strong bull green, strong bear magenta, neutral yellow, and weak gray based on score plus direction. 🔥 VISUAL SYSTEM Six coordinated visual elements deliver the information without clutter: • Score histogram on the sub-panel, colored per bar by that bar's own score level (green for Strong, yellow for Mild, gray for Weak / Range). Each historical bar shows its true state at the time, not the current state. • Horizontal reference lines at the Strong (green) and Mild (yellow) thresholds on the sub-panel. • Historical Max step line in indigo accent, showing the highest score reached within the lookback window, so past trend peaks are immediately visible. • Mini Gauge on the right edge of the sub-panel. A compact vertical meter split into two halves: left half shows the fixed 0-100 zone reference (Weak / Mild / Strong), right half fills up to the current score, with a bold needle line marking the exact level. • Price badge floating above the last candle, showing "TSM " so the reading is visible without needing to look at the panel. • Information panel on the price chart with seven rows: Score, State, Direction, Dominant Factor, Historical Max, and Strong Bars duration. 🧭 SIGNALS AND ALERTS Three built-in alerts: • Strong Bull Entry — Score crosses above the Strong threshold while directional bias is Bull. • Strong Bear Entry — Score crosses above the Strong threshold while directional bias is Bear. • Trend Fade — Score drops below the Mild threshold, indicating the trend is weakening. All alerts fire once per bar close, so there is no intra-bar repainting. 🧮 KEY INPUTS Core Settings • ADX Length, Slope MA Length, Momentum ROC Length, MA Alignment Fast / Mid / Slow, Pullback ATR Length • Score Smoothing (EMA applied to score for optional overlay line) • Strong Threshold (default 80), Mild Threshold (default 50), Historical Lookback (default 100 bars) Factor Weights (auto-normalized) • ADX 30, Slope 20, Momentum 20, Alignment 20, Pullback 10 Visual • Badge toggle, Background tint toggle, Reference lines toggle, Mini Gauge toggle, Historical Max line toggle, Smoothed Score line toggle, Label size, Badge ATR offset Panel • Show / hide, Position (6 anchors), Theme (Dark / Light), Font size 📈 HOW TO USE 1. Add the indicator to any chart and any timeframe. Defaults are calibrated for 4H / Daily; for lower timeframes consider reducing the ADX and ROC lengths. 2. Use the 0-100 score as a regime filter. Many trend-following setups perform better when the score is above 50, and breakout / continuation setups perform best when the score is crossing above 80 with a clear Bull or Bear direction. 3. Watch the Dominant Factor. A score of 85 driven primarily by Momentum may fade fast; the same score driven by Alignment tends to be more structural. 4. Use Historical Max and Strong Bars to gauge maturity. A Strong-Bars reading of 30+ on a daily chart often signals late-cycle conditions where continuation risk increases and fresh entries need tighter risk management. 5. Combine with structure tools (support / resistance, order blocks, market-structure tools) for entries. This indicator is designed to answer "how strong is the trend," not "where do I enter." ⚠️ LIMITATIONS AND TRANSPARENCY • This is an indicator, not a trading strategy. It does not produce buy / sell recommendations and it does not backtest trade outcomes. • The score is a lagging composite built from historical price data. It does not predict future price movement. • During sharp regime transitions (news events, gap opens), the score can change rapidly from one bar to the next. This is by design, not a bug. • Factor weights are user-adjustable. Defaults are a reasonable starting point but may need tuning per instrument / timeframe. • The Pullback factor assumes trending behavior. In tight consolidations it can read misleadingly high, which is why the Dominant Factor readout exists as a cross-check. • No-repaint: all calculations are based on confirmed (closed) bar data; alerts fire on bar close only. 📌 RISK DISCLOSURE Trading carries substantial risk. This indicator is an analytical tool for research and study purposes and does not constitute financial advice, a trading signal, or a recommendation to buy or sell any instrument. Past behavior of any indicator is not indicative of future results. Users are solely responsible for their trading decisions and should conduct their own due diligence and risk management.
مؤشر Pine Script®
من ‎AGProLabs‎
Kinetic Hull Matrix [JOAT]Kinetic Hull Matrix Overview Kinetic Hull Matrix is an adaptive trend-following indicator centred on a Hull Moving Average cloud with ATR-proportional envelopes, a custom ADX engine, a 0–100 composite signal scoring system, and a multi-timeframe trend table — all rendered in a layered fill system that visually communicates trend strength and cloud penetration depth simultaneously. Retest signals fire when price touches the cloud boundary from within the trending direction, scored by four independent quality factors. The Hull Moving Average — Why It Matters The Hull Moving Average (HMA) was designed to reduce lag while maintaining smoothness. The calculation uses weighted moving averages at half-length and full-length, doubles the half-length result, subtracts the full-length result (creating a de-lagged series), then applies a final WMA at the square root of the length: WMA(2 * WMA(src, n/2) - WMA(src, n), sqrt(n)) This produces a moving average that reacts significantly faster to price changes than a standard EMA or SMA of the same length, while filtering micro-noise through the final WMA pass. The result is a responsive midline that rarely produces whipsaws in trending markets. ATR-Adaptive Cloud Architecture The HMA midline is expanded into a four-layer cloud using the current ATR: - Inner cloud (upper and lower bands): HullMid ± ATR × CloudMultiplier (default 1.0). This is the primary retest detection zone. - Outer bands: HullMid ± ATR × CloudMultiplier × OuterMultiplier (default 1.618, the golden ratio). These define the statistical extreme of the cloud envelope. The cloud dynamically widens during volatile markets and contracts during compression — naturally adapting to market conditions without manual parameter changes. Four fill layers are rendered between the bands using trend-coloured gradients: bright teal in uptrends, muted red in downtrends, creating an intuitive visual heat map of trend energy. Custom ADX Engine Rather than relying on the built-in ta.dmi(), Kinetic Hull Matrix implements its own ADX from first principles: 1. Positive directional movement (plusDM) = max(high - high , 0) when high-to-high exceeds low-to-low 2. Negative directional movement (minusDM) = max(low - low, 0) when low-to-low exceeds high-to-high 3. Both are smoothed via ta.rma() over the ADX length, then divided by the RMA of true range to produce +DI and -DI 4. The directional index DX = abs(+DI - -DI) / (+DI + -DI) * 100, finally smoothed via ta.rma() to produce ADX This gives a transparent, auditable ADX implementation. Values above 25 indicate a trending regime; below 25 indicates ranging conditions. The dashboard and scoring system both use this value. Composite Signal Score (0–100) A retest signal qualifies only when close price enters the inner cloud (touches upper cloud from above in a downtrend or lower cloud from below in an uptrend) while the candle closes back in the trend direction. The resulting signal is then scored: - Proximity score (up to 50): How deeply price penetrated into the cloud. Deeper retests score higher. - Volume score (up to 25): Current volume relative to its 20-bar SMA. Higher participation scores higher. - RSI score (up to 15): RSI directional headroom — long signals score better when RSI has room below 55, short signals when RSI has room above 45. - ADX score (up to 10): Raw ADX value × 0.4, capped at 10. Strong trends produce higher-quality retests. Only signals meeting the configurable minimum score threshold (default 40) are displayed. S/R Line Stamping Each confirmed retest signal stamps a horizontal dotted line at the close price, extending 60 bars forward. These lines serve as dynamic support (for bull retests) and resistance (for bear retests). Lines are automatically invalidated and deleted if price closes through them by more than 0.5 ATR — the indicator only keeps lines that have not been structurally broken. Multi-Timeframe Trend Table (Top Right) Five user-configurable timeframes are assessed using the same dual-EMA logic (fast = HullLen/2, slow = HullLen). Each cell displays BULL or BEAR in the trend's colour. A "X/5 Bull" counter at the bottom summarises alignment. The table also shows current ADX value, RSI, and number of active S/R lines. Inputs Reference Hull Cloud - Hull MA Length (21) — primary HMA period - ATR Length (14) — period for ATR cloud width - Cloud Width (1.0 ATR) — inner cloud half-width multiplier - Outer Band Mult (1.618) — outer band golden-ratio expansion - ADX Length (14) — custom ADX smoothing period - Volume SMA Length (20) — reference for volume scoring - RSI Length (14) Retest Detection - Min Signal Score (40) — minimum composite score to display signal - Max S/R Lines (8) — maximum simultaneous S/R lines on chart - S/R Break Buffer (0.5 ATR) — tolerance before a line is considered broken - Show Score Label / Show S/R Lines MTF Dashboard - Show MTF Trend Table - TF 1–5 — five independently configurable timeframes Visual - Theme: Dark, Light, Auto How to Use 1. Apply to a liquid trending instrument. Allow warmup (roughly 3× Hull Length bars). 2. Identify the trend from cloud colour: teal fills = uptrend, red fills = downtrend. 3. Wait for price to dip into the inner cloud during an uptrend (or spike into it during a downtrend) and close back in the trend direction. 4. Check the score label — prefer grade 55+ (B or higher). Crosscheck with the MTF table: 4+ of 5 timeframes aligned significantly improves reliability. 5. The stamped S/R line from the retest level serves as a reference for re-entry if price pulls back again. Non-Repainting Design All retest signals are gated by barstate.isconfirmed. MTF data uses lookahead_off. S/R line management runs only on confirmed bars. No visual element shifts position after the bar closes. Limitations - In ranging, choppy markets, the cloud direction changes frequently and retest signals may have low predictive value. The ADX score component partially mitigates this, but consider increasing the minimum score threshold in low-trend environments. - S/R lines accumulate during active trend periods. The max line count setting prevents chart clutter. - MTF trend data requires request.security() calls per timeframe. On lower timeframes with very high bar counts, this may slightly affect indicator load time. Disclaimer This indicator is for educational and informational purposes only. No signal scoring system guarantees future performance. Always use proper risk management and conduct independent analysis before trading. Made with passion by officialjackofalltrades
مؤشر Pine Script®
من ‎officialjackofalltrades‎
1
Trend Quality [AGPro Series]Trend Quality Trend Quality fuses three independent regime dimensions — ADX directional strength, Kaufman Efficiency Ratio, and ATR-normalized EMA slope — into a single 0–100 composite Trend Quality Score. A hysteresis + confirmation + cooldown gate turns that score into a stable TREND / CHOP regime, enhanced with HTF confirmation, lifecycle phases, score velocity, breakout grading, directional dominance, and a full adaptive on-chart quality window. The goal is simple: replace noisy "is this a trend?" guessing with a transparent, multi-dimensional, low-lag quality reading you can read in one glance. 🎯 OVERVIEW Most trend filters fail at the same thing — they tell you a trend exists, but not whether that trend is clean, accelerating, fading, or already exhausted. Trend Quality answers the harder question. Every bar is scored on three independent dimensions that each measure a different physical property of price movement: • ADX — directional strength (how strongly one side dominates) • Kaufman Efficiency Ratio (ER) — path efficiency (how little wasted motion) • ATR-normalized EMA slope — normalized trend velocity (how fast, relative to volatility) These three signals are combined into one 0–100 Trend Quality Score. A hysteresis band + confirmation bars + cooldown filter convert that score into a stable TREND / CHOP regime — no single-bar flipping, no false recovery wicks. On top of the core regime, the indicator layers Score Velocity, Lifecycle phases (Emerging → Confirmed → Exhausting), Breakout Quality grading (A / B / C), directional dominance, and a visual Quality Window that tracks the active trend zone and projects it forward. 💎 UNIQUE EDGE What separates Trend Quality from a standard ADX filter, an EMA slope indicator, or a generic regime meter: • Tri-factor fusion (not a single metric) — ADX alone misses path quality; ER alone misses direction; slope alone misses choppy-but-strong moves. Weighted fusion (45% ADX, 35% ER, 20% Slope) neutralizes each component's blind spot. • Stable regime, not a flickering line — the TREND / CHOP state passes through a 3-layer filter: hysteresis band around the threshold, N confirmation bars, and a cooldown window after every transition. The result is a regime reading that holds through pullbacks without flipping. • Score Velocity Engine — a second-derivative layer that watches how fast the score itself is changing. Surges flag momentum ignition; collapses flag quality breakdown before price confirms it. A bearish divergence detector fires when price makes new highs while quality is fading. • Lifecycle phases — inside every TREND regime, the script distinguishes Emerging (young, fresh, accelerating), Confirmed (mature, stable, above buffer), and Exhausting (score rolling over from a peak). This lets you see whether you are entering early, running mid-trend, or catching the end. • Breakout Quality Badge (A / B / C) — every CHOP → TREND transition receives a graded badge based on composite score plus velocity bonus. Grade A breakouts are rare and have an optional dedicated alert. • HTF confirmation with Auto-HTF mapping — the same engine runs on a higher timeframe. When LTF is trending but HTF is not, the regime is marked BLOCKED (not forced to CHOP) so you retain full transparency about why the regime is gated. • Adaptive Quality Window — a live rectangular zone that tracks the full trend's high/low from its start bar, projects forward, shows ceiling/floor projection labels, and preserves historical windows with directional color coding (green for up-trends, pink for down-trends, amber for HTF-blocked trends). 🧪 METHODOLOGY Core composite score (every bar, LTF): Score = 100 × (0.45 × ADX_norm + 0.35 × ER_norm + 0.20 × Slope_norm) • ADX_norm = min(ADX / 50, 1) • ER_norm = |close − close | / (SMA(|Δclose|, N) × N) • Slope_norm = min(|EMA − EMA | / ATR × 10, 1) Regime gating: • Hysteresis: +3 above threshold to enter TREND, −3 below to enter CHOP • Confirmation: N consecutive bars above/below the hysteresis band • Cooldown: N bars after every regime flip where no new flip is allowed MTF confirmation (optional, default ON): The same core function is called via request.security on the HTF (Auto: 30m→4H, 4H→Daily, Daily→Weekly, Weekly→Monthly in Strict mode). When LTF=TREND but HTF=CHOP, the regime is tagged BLOCKED — a transparent third state that is neither forced-CHOP nor accepted-TREND. Lifecycle logic: • Emerging: TREND is young (bars since start ≤ Emerging Bars) OR score slope ≥ 0 and score below buffer • Confirmed: score ≥ threshold + Confirmed Buffer AND HTF passes (optional) • Exhausting: score slope < 0 AND pullback from peak ≥ Exhaustion Pullback Score velocity: velocity = score − score (default 5-bar look-back) Breakout quality grading: bqScore = score + velocity_bonus (bonus: +15 if vel>15, +7 if vel>5, else 0) A ≥ 82, B ≥ 67, C < 67 🔔 SIGNALS & ALERTS The script exposes 12 alert conditions — all moderator-safe, educational, non-solicitating: • CHOP → TREND / TREND → CHOP regime flips with LTF+HTF context • Strong Trend composite conviction threshold • HTF Blocked / HTF Unblocked third-state transparency events • Emerging / Confirmed / Exhausting Trend lifecycle phase changes • Velocity Surge / Velocity Collapse second-derivative extremes • Grade-A Breakout rare high-conviction breakouts • Bearish Divergence price up, quality down warning On-chart visual events (also filterable via inputs): • Breakout Quality badge (A / B / C) at every CHOP → TREND • Bearish divergence ⚠ marker at trend peaks where quality fades • State tag near backbone: EMERGING / CONFIRMED / EXHAUSTING / HTF BLOCKED • Quality Window label: ACTIVE + phase • Projection labels on the right edge: QUALITY CEILING / TREND FLOOR All badge and warning labels are gated with an 8-bar cooldown so the chart stays clean even on repeated intra-swing triggers. ⚙️ KEY INPUTS Core engine: • ADX Length (14) — directional strength look-back • Efficiency Length (20) — ER path-efficiency window • Slope EMA Length (50) — trend backbone reference • ATR Length (14) — volatility normalization • TREND Threshold (55) — composite score level to enter TREND • Confirmation Bars (1) — bars of persistence before flipping • Strong Trend Offset (15) — extra score above threshold for STRONG tag MTF: • HTF Confirmation (ON) — enable/disable HTF gate • Auto HTF (ON, Strict) — smart HTF mapping per chart TF • Manual HTF (240) — override timeframe Stability: • Change Cooldown Bars (2) — lock-out window after any regime flip Lifecycle: • Emerging Phase Bars (4) — max trend age to stay Emerging • Confirmed Buffer (8.0) — score must clear threshold+buffer • Exhaustion Pullback (4.0) — peak-to-current drop to flag Exhausting Visual Overlay: • Backbone + Glow + Zone + State Candles + Quality Window + Historical Windows + Projection Box + Guides + Midline (all toggleable) Panel, Theme, Layout, Help rows, Alerts, Score Velocity Engine, Breakout Quality Badge, Divergence Detector — every layer has its own input group and can be shown/hidden independently. 📘 HOW TO USE Read-in-one-glance panel (standard AGPro format): • Blue header row: script title • Line 2: REGIME / LIFECYCLE · Score N/100 · Velocity state • Line 3: LTF regime · Direction · Directional Dominance • Line 4: HTF regime · MTF PASS/BLOCKED · Active Window state · Streak Quick playbook: 1. CHOP on LTF → wait. No setup, no commitment. 2. CHOP → TREND transition with Grade A badge + HTF PASS → highest-conviction regime start. 3. CONFIRMED phase with DOM HIGH and rising score → the middle of the trend, usually the cleanest section. 4. Velocity COLLAPSE or EXHAUSTING phase with bearish divergence ⚠ → quality is deteriorating; reduce exposure or tighten stops. 5. HTF BLOCKED amber window → LTF trend exists but higher timeframe disagrees; treat as lower-conviction and be aware of mean-reversion risk. The indicator does NOT issue buy/sell signals, does NOT define entry/exit prices, and is NOT a strategy. It is a regime-quality reading — a context layer you pair with your own trade management. ⚠️ LIMITATIONS & TRANSPARENCY • Trend-quality indicators are inherently trend-following. In low-volatility ranges the score can stay above threshold on minor moves; in very fast markets the score can lag by 1–3 bars while the filters stabilize. • HTF confirmation introduces a natural HTF delay. This is intentional (it removes noise) but means the HTF gate may lift several LTF bars after price has already moved. • All composite signals rely on look-backs (ADX 14, ER 20, Slope EMA 50, ATR 14). On very short intraday timeframes with low bar counts these need calibration. • Lifecycle phases are structural readings, not predictions. EXHAUSTING means the score is rolling over — not that price must reverse. • Past performance of any visual regime does not imply future performance. Charts showing clean historical windows are illustrative of the indicator's logic, not trading results. • No repainting on historical bars. The HTF call uses lookahead_off and barmerge.gaps_off. Score and regime values on closed bars are final. 🛡️ RISK DISCLOSURE This script is published as an educational and analytical tool. It does not provide financial advice, does not generate trade signals of any kind, and must not be used as a standalone decision system. Markets involve substantial risk of loss. Past behavior of any market regime, indicator output, or historical visual window is no guarantee of future results. Always combine any indicator with independent risk management, position sizing, a tested plan, and — where appropriate — the guidance of a licensed professional. You are solely responsible for any trading decisions you make.
مؤشر Pine Script®
من ‎AGProLabs‎
Kaufman Efficiency Ratio Gate [NovaLens]Kaufman Efficiency Ratio Gate is a regime classifier that separates trending markets from choppy ones. Instead of plotting a raw ratio and leaving you to interpret thresholds, it ranks the current Kaufman Efficiency Ratio within its own recent history and outputs a binary gate: trend-favorable or chop-dominant. Five timeframe-specific presets ship ready to use - pick the one matching your chart. ◉ HOW IT WORKS The Efficiency Ratio measures how much of price's total movement was directional over N bars: ER = |Close - Close(N)| / Σ|Close(i) - Close(i-1)| A value near 1.0 means price moved in a straight line - maximum efficiency. A value near 0 means price covered distance but went nowhere net - noise. Perry Kaufman introduced this in "Trading Systems and Methods" (1995) as the foundation for his Adaptive Moving Average. Raw ER values are hard to threshold because what counts as "efficient" varies by asset and timeframe. This gate solves that with a three-stage pipeline: • Light EMA smoothing - removes single-bar noise from the raw ER without adding meaningful lag (Smoothing = 2 for most presets). • Percentile rank - ranks the smoothed ER within its own rolling window. A reading at the 70th percentile means the current efficiency is higher than 70% of recent history. This is what makes the gate self-normalizing. A "trending" efficiency ratio for Gold might sit at 0.45, while for a volatile altcoin it might be 0.25 - the gate adjusts automatically to each asset's own baseline, so you never need to guess at fixed thresholds. • Symmetric hysteresis - the gate opens when rank crosses above the median + Stability/2, and closes when rank drops below the median - Stability/2. This prevents flicker at the boundary. A small buffer (Stability = 2) is enough because KER is already a clean ratio. Other regime tools approach this differently. ADX measures trend strength through smoothed directional movement - it tells you how strong a trend is, but its fixed scale means a reading of 25 carries different weight on different instruments. The Choppiness Index compresses ATR relative to the window's price range into a 0-100 scale - useful, but sensitive to window length and not inherently normalized. The Efficiency Ratio takes a more direct route: what fraction of total movement was net directional? And the percentile-rank layer on top makes that reading self-normalizing across any asset or timeframe - no manual threshold tuning required. The result is a binary state: trend-favorable (gate open) or chop-dominant (gate closed). ◈ HOW TO READ IT • Teal background / teal hero line - Gate open. The market's directional efficiency is above its recent median. Trend-following setups tend to perform better in this environment. • Amber background / amber hero line - Gate closed. Efficiency is below the median - price is moving but not going anywhere. Trend-following setups historically tend to underperform in this environment. • Bright teal (strong trend) - Smoothed KER is in the top 25% of its recent rank window. The trend is unusually clean - continuation setups tend to be cleaner in this state. • Bright amber (strong chop) - Smoothed KER is in the bottom 25%. Noise is dominant - even range-bound strategies may find fewer clean entries. Generally a low-opportunity environment. The info panel (top-right) shows the current gate state, smoothed KER value, percentile rank, and a momentum readout (strengthening / weakening / stable) based on how the rank has moved over the last few bars. ✦ HOW WE USE IT - REGIME FILTER In systematic trading, the Efficiency Ratio often serves as one of the regime filters applied before a trend-following signal gets capital allocation. The idea is to confirm that the market is actually trending efficiently, not just moving. When the gate is open (teal), directional efficiency is elevated. Pullback entries, breakout continuations, trend-following MA crosses - these setups tend to perform better because price is converting movement into net progress. When the gate closes (amber), the same setups historically tend to underperform. Price is volatile but going nowhere. In choppy regimes, trend-following systems generally struggle, and while mean reversion may be more favorable, it remains a harder environment to trade overall. Many systematic traders use this kind of regime awareness to reduce exposure or adjust position sizing rather than forcing directional bets. The gate works well as a context overlay alongside other entry signals. It doesn't indicate which direction to trade, but it helps characterize whether the current environment is rewarding directional movement at all. What the gate is NOT: a forward predictor. It classifies the recent past. A gate-open reading means efficiency has been high - it doesn't guarantee the next bar will trend. It's a filter, not a crystal ball. ◆ OTHER APPLICATIONS • Entry filter - pair with any trend-following signal (MA cross, breakout, RSI) and add a gate-open condition. Filtering out chop regimes can help reduce whipsaw entries. • Multi-timeframe confirmation - checking the gate on a higher timeframe before entering on a lower one can add confidence. For example, a Daily gate-open reading alongside a 4H trend entry. • Regime-aware sizing - some traders scale position size with regime state, increasing exposure during gate-open periods and reducing it when the gate closes. • Alert-driven workflow - set alerts on gate open/close transitions and check your trend setups only when the gate fires. ⚙ SETTINGS Preset (default: Daily) - Timeframe-specific parameter bundles. Select the one matching your chart resolution: • Weekly - KER 10, Smoothing 2, Rank Window 100, Stability 2. Long context window for position traders. • Daily - KER 8, Smoothing 2, Rank Window 50, Stability 2. The default. Works well on most daily charts. • 8H - KER 8, Smoothing 2, Rank Window 50, Stability 2. Starting point same as Daily - validate on your own 8H charts. • 4H - KER 14, Smoothing 2, Rank Window 30, Stability 2. Wider KER period compensates for noisier intraday data. • 30m - KER 5, Smoothing 5, Rank Window 30, Stability 2. Short KER period with heavier smoothing for fast charts. • Custom - Drive the gate from the four inputs below. KER Period - Lookback for the raw Efficiency Ratio. Shorter (5-8) reacts faster to regime changes. Longer (14-20) gives more stable readings but lags transitions. Smoothing - EMA applied to the raw KER. Set to 1 for no smoothing. KER is self-normalizing by construction, so low values (1-5) are usually enough. Rank Window - Rolling window for the percentile rank. Controls how much recent history defines "typical." Shorter windows adapt faster; longer windows give more stable context. Stability - Hysteresis half-width around the 50th percentile. At 0, the gate flips the instant rank crosses the median. At higher values, the gate requires a stronger signal to switch state. Low values (2-5) work well since KER is already a clean signal. Display toggles: • Show Raw KER - thin white line showing the unsmoothed ratio • Show Median - 50th-percentile reference line on the smoothed KER • Show Background - teal/amber background wash (turn off if your workspace already signals the regime elsewhere) • Show Info Panel - gate state, KER, rank, and momentum readout • Light Theme - flips panel colours for light chart backgrounds △ LIMITATIONS • Backward-looking - the gate classifies recent efficiency, not future direction. Regimes can shift faster than the rank window catches, especially around news events. • Directionless - both strong uptrends and strong downtrends produce gate-open readings. A separate directional indicator is needed to determine which side to trade. • Noise on thin instruments - short KER periods on low-volume assets can produce noisy readings even with smoothing. • History requirement - percentile rank needs sufficient data to be meaningful. The first ~50-100 bars on any chart (depending on preset) will have unstable rankings. ⌁ NOTES • Based on Perry Kaufman's Efficiency Ratio from "Trading Systems and Methods" (1995) • Cross-validated against our PyneCore Python reference implementation. • Parameters were tuned on gold (XAUUSD) via the NovaLens research pipeline. The same presets generalize reasonably to other assets - though testing on your own instruments is always recommended. • Regime palette: teal = trend-favorable, amber = chop-dominant. Not green/red - this is a state classifier, not a directional signal. If you find a Custom parameter set that works well on a different instrument, the comments are a good place to share it.
مؤشر Pine Script®
من ‎NovaLens‎
ES Breakout Toolkit ADX Regime Filter Free=== PART OF THE ES BREAKOUT TOOLKIT === This is one of several free, standalone indicators that make up the ES Breakout Toolkit series. Each indicator isolates a single component used in the full ES London Breakout Pro strategy. They are designed to be useful on their own and educational for traders looking to filter trades by market regime using ADX. === WHAT THIS INDICATOR DOES === The ADX Regime Filter classifies the current market environment into three states: Flat/Choppy, Trending, and Overextended. It does this using the Average Directional Index (ADX) with configurable minimum and maximum thresholds that define a "sweet spot" where the market is trending enough to produce clean breakouts but not so extended that it is likely to reverse or stall. The indicator plots ADX alongside DI+ and DI- lines, highlights the sweet spot zone between your min and max ADX values, and provides visual markers when ADX enters or exits each regime. DI crossovers are also marked to help identify directional shifts. === HOW TO USE IT === Apply this indicator to a separate pane below your chart. The shaded zone between the min and max ADX lines represents the regime where trend-following and breakout strategies tend to perform best. When ADX is below the minimum, the market is likely choppy and breakout signals are less reliable. When ADX is above the maximum, the trend may be overextended and new entries carry higher reversal risk. The dashboard shows the current ADX value, regime classification, DI direction, DI spread, ADX slope, and an overall trade readiness assessment. The DI spread reading helps confirm whether the directional move has conviction — a narrow spread suggests indecision even if ADX is technically in range. === KEY FEATURES === - Three-state regime classification (Flat, Trending, Overextended) - Configurable ADX sweet spot zone with visual fill - DI+/DI- directional lines with crossover markers - ADX slope tracking (rising vs falling momentum) - Optional bar coloring by regime and direction - Background shading by current state - Dashboard with ADX, regime, direction, DI spread, slope, and trade readiness - Alerts for regime transitions and DI crossovers === WHY ADX BOUNDARIES MATTER === Most traders using ADX only set a minimum threshold. However, extremely high ADX readings often indicate that a trend is mature and vulnerable to exhaustion. By defining both a floor and a ceiling, you can focus on the portion of the trend cycle where momentum is building rather than peaking. This indicator makes that concept visual and actionable. === ABOUT THE ES BREAKOUT TOOLKIT === This indicator is part of a free series that breaks down the building blocks of a London session ES futures breakout strategy. Other free indicators in the series cover session highlighting, consolidation range detection, breakout candle scanning, and momentum close analysis. Each is published separately on my profile. The full ES London Breakout Pro indicator combines all of these components into a unified strategy with additional proprietary features including advanced risk management, trade qualification, and data tracking. It is available as an invite-only script on my profile. Use the access request instructions on that script's page if you are interested. === DISCLAIMER === This indicator is provided for educational and informational purposes only. It is NOT financial advice. It does not constitute a recommendation to buy, sell, or hold any financial instrument. Trading futures involves substantial risk of loss and is not suitable for all investors. Past performance of any indicator or strategy is not indicative of future results. Always conduct your own research and consult a qualified financial advisor before making any trading decisions. You are solely responsible for your own trading activity.
مؤشر Pine Script®
من ‎keyno_‎
Aegis Pulse & Energy [wjdtks255]■ 1. Overview Aegis Pulse & Energy is a hybrid strength oscillator that synchronizes trend intensity with capital flow. It filters out weak, manipulative price movements and identifies high-conviction trends where actual "Smart Money" is active, represented as the market's vital pulse. ■ 2. Technical Breakdown (The Energy Engine) ADX Trend Intensity: Measures the pure strength of a trend, regardless of direction. A surge above the 25 threshold indicates the start of a high-energy movement. MFI Accumulation Logic: Tracks the volume-weighted relative strength (Money Flow Index) to confirm if price moves are backed by genuine liquidity. Hybrid Momentum Filter: Combines trend strength and money flow into a single visual gauge, changing colors based on the synergy between the two. ■ 3. Key Visual Signals Gold Pulse (Strong Energy): Appears when the trend is powerful (ADX > 25) and capital is aggressively flowing in. This is the "Prime Trend" signal. Cyan Pulse (Trend Activation): Indicates a developing trend with healthy liquidity, often seen at the beginning of a major shift. Gray Wave (Low Energy): Signifies a weak, sideways market where price movement lacks conviction and capital flow is stagnant. ■ 4. How to Use (Strategy Guide) Energy Confirmation: Do not enter trades when the pulse line is Gray. Wait for the line to turn Cyan or Gold to ensure you are trading with the market's momentum. Money Flow Divergence: Observe the histogram; if the pulse line is high but the histogram is shrinking, it warns of a potential "Exhaustion" where the trend is losing its financial backing. ■ 5. Originality & Disclaimer The originality of Aegis Pulse & Energy lies in its "Trend-Liquidity Synchronicity." Unlike standard oscillators, it prevents entering "Dead Trends" that lack volume support. This tool is for educational purposes only; all financial risks are the responsibility of the user.
مؤشر Pine Script®
من ‎wjdtks255‎
MULTIVITAMIN1. What is MULTIVITAMIN? MULTIVITAMIN is a custom-built, open-source algorithmic scalping indicator designed for TradingView. Its primary goal is to capture high-probability momentum trades by combining pure Price Action (PA) mechanics with advanced trend and volatility filters, specifically engineered to avoid "chop" (ranging/flat markets) and deliver healthy, actionable signals. 2. What does it cover? (Core Modules) Price Action Engine: The core of the system. It detects real-time structural market shifts by identifying Engulfing patterns, Order Blocks (OB) with volume confirmation, and Fair Value Gaps (FVG). Trend & Momentum Filters: Utilizes a multi-timeframe Hull Moving Average (HMA) for signal smoothing, a 50-period EMA for macro trend direction, and an ADX filter to ensure the market has sufficient momentum before entering a trade. Pro Walls (Anti-Chop System): Features advanced, optional defensive mechanisms: an ATR-based volatility filter (ensuring candle size is larger than average market noise) and an EMA slope filter (ensuring the trend line is actually pointing up or down, not moving sideways). Volume Supported Breakout (BKR): An optional hybrid feature that looks for extreme volume spikes (compared to a 20-period SMA) combined with local high/low breakouts. Lifecycle Management: A built-in state machine (Idle, Long, Short) that tracks the trade's status, preventing overlapping entries and managing exits based on user-defined criteria. 3. What is its operational logic? Step 1: Scanning & Setup: The script continuously monitors price action for base entry conditions. Step 2: The Gauntlet (Filtering): A setup must pass through all active user filters (EMA, ADX, Volatility, etc.) before being validated. Step 3: State Execution: If all conditions align, the internal bot state shifts from 0 (Idle) to 1 or -1, plotting an ENTER shape on the chart and triggering an external webhook alert. Step 4: The Exit: The bot remains in this state until a valid exit condition (like a reverse PA signal) is met. 4. ⚠️ CRITICAL: How to Set Up Alerts (The Anti-Repainting Rule) ⚠️ If you are using the "Exit on Reverse Signal" (Ters Sinyalde Çık) feature in the settings, you MUST configure all your TradingView alerts (both ENTER and EXIT alerts) to trigger "Once Per Bar Close". Why? If you set them to "Once Per Bar" (anlık tetikleme), intra-bar price fluctuations (wicks) will trigger premature exit/entry orders to your exchange before the candle officially closes, leading to repainting on the chart and ghost orders in your account. Always wait for the candle to close to confirm the structural shift!
مؤشر Pine Script®
من ‎lisabyco‎
1
EagleEye-DashboardIndicator Description & Disclaimer This indicator has been developed independently for educational and personal learning purposes, based on hands-on trading experience and continuous research into multi-timeframe analysis. What this indicator does: This tool consolidates three of the most widely used technical indicators — MACD, RSI, and Stochastic Oscillator — into a single, clean dashboard view. Rather than switching between multiple charts and timeframes manually, traders can now see the status and alignment of all three indicators across multiple timeframes (MTF) at a single glance. This helps in quickly identifying trend confluence, momentum shifts, and potential entry/exit zones without cluttering your chart. Key features: Multi-Timeframe (MTF) dashboard view in one unified panel Real-time status display for MACD, RSI, and Stochastic Designed for clarity, speed, and ease of interpretation Suitable for indices, equities, forex, and crypto markets Disclaimer: This indicator is strictly developed for learning and informational purposes only. It does not constitute financial advice, investment recommendation, or a solicitation to buy or sell any financial instrument. Past performance of any signal generated by this indicator does not guarantee future results. Trading in financial markets involves substantial risk, and you may lose more than your initial investment. Always conduct your own due diligence, apply proper risk management, and consult a certified financial advisor before making any trading decisions. The author holds no responsibility for any trading losses incurred through the use of this indicator. Use at your own risk. Future Roadmap: This indicator is actively being refined. Upcoming versions will aim to improve signal accuracy, add additional confirmation layers, and expand timeframe flexibility based on user feedback and ongoing research. Developed with passion for the trading community. Regards, Ramesh Vaishya Independent Trader & Indicator Developer
مؤشر Pine Script®
من ‎Chandrandra‎
AG Pro DMI Rotation Pressure [AGPro Series]AG Pro DMI Rotation Pressure Overview / What it does AG Pro DMI Rotation Pressure is designed to track directional leadership shifts between +DI and -DI rather than treating DMI as a simple trend-strength confirmation tool. The script focuses on which side is gaining control, how decisively that control is expanding, and whether the current condition reflects rotation, compression, drift, or established directional pressure. The indicator is plotted in a separate pane so the rotational structure can be read clearly without interfering with price structure on the main chart. It combines a net pressure histogram, a pressure signal line, DI spread behavior, rotation bursts, and compression tension into one framework intended to make directional handoffs easier to interpret. This script is intentionally different from strength-oriented DMI or ADX studies. In many DMI-based tools, ADX becomes the main story. Here, ADX is only a supporting context value. The primary objective is to monitor the push-and-pull between +DI and -DI, especially when leadership is unstable, when pressure begins to build after compression, or when one side starts to hold directional control more consistently. For traders who want to study internal directional pressure before or during trend development, this script is built to highlight control transitions rather than just reporting whether a trend is already strong. Unique Edge The distinctive feature of this script is its emphasis on rotational pressure instead of trend-strength ranking. Rather than asking only whether the market is strong, it asks which side is taking control, whether that control is improving or fading, and whether a transition is underway. This produces a different read from a standard ADX workflow. A market can have moderate ADX and still show meaningful bullish or bearish pressure transfer through the behavior of +DI and -DI. Conversely, a market may print elevated ADX while the directional leadership structure is already weakening or becoming unstable. By separating directional leadership from raw strength, the script aims to expose the internal character of the move more clearly. The script also classifies the environment into readable states such as Bull Rotation, Bear Rotation, Bull Control, Bear Control, Bull Expansion, Bear Expansion, Bull Drift, Bear Drift, and Compression Battle. That state engine is meant to reduce ambiguity and make the pane easier to interpret quickly across multiple symbols and timeframes. Methodology The script begins with the DMI framework: +DI, -DI, and ADX. From there, it derives a rotational model built around DI spread and spread behavior over time. 1. DI leadership The core directional read is the spread between +DI and -DI. Positive spread means bullish directional leadership. Negative spread means bearish directional leadership. The magnitude of that spread is used as one layer of directional pressure assessment. 2. Rotational slope behavior The script evaluates how +DI and -DI are changing, not only their absolute values. This helps estimate whether one side is accelerating relative to the other. Slope behavior is important because leadership transitions often begin before a large DI spread is fully established. 3. Pressure scoring Bullish and bearish pressure are scored separately using DI spread, relative slope behavior, and spread momentum. This creates the Bull / Bear pressure readings shown in the panel, as well as the Net Pressure histogram in the pane. 4. Signal smoothing A pressure signal line is applied to the net pressure series to make pressure drift and bias easier to read. This is not intended as a prediction line. It is a smoothing layer that helps frame whether the dominant side is strengthening, fading, or remaining relatively stable. 5. Rotation bursts Crossovers between +DI and -DI are treated as potential rotational events. The script scores those events so that rotation markers are tied to directional handoff rather than appearing as purely cosmetic crossover labels. 6. Compression and tension When DI spread contracts below the compression threshold, the script evaluates internal tension. This is useful because some of the most meaningful directional expansions begin after a compressed and contested leadership state. Compression Battle is meant to identify that contested environment, not to forecast direction by itself. 7. State engine The script assigns a readable state based on pressure, spread, crossover status, and compression context. This is what allows the study to describe the environment as rotation, control, expansion, drift, or compression instead of leaving the user to infer all conditions from raw lines alone. Signals & Alerts The script includes deterministic alert conditions for the following events: Bull Rotation Triggered when +DI crosses above -DI and bullish directional rotation takes control. Bear Rotation Triggered when +DI crosses below -DI and bearish directional rotation takes control. Bull Control Triggered when bullish pressure is in control territory. Bear Control Triggered when bearish pressure is in control territory. Compression Battle Triggered when DI spread is compressed while internal tension is elevated. These conditions are designed to describe state changes inside the DMI structure. They should be used as analytical events, not as automatic trade instructions. Key Inputs DI Length Controls the base DMI sensitivity. ADX Smoothing Adjusts the ADX smoothing component used for contextual strength reading. Rotation Slope Smoothing Changes how quickly slope-based rotational behavior reacts. Pressure Signal Length Controls smoothing of the net pressure signal. Compression Threshold Defines when DI spread is considered compressed. Expansion Threshold Defines when directional pressure begins to qualify as expansion. Control Threshold Defines when directional pressure is strong enough to be treated as control. Visual controls Backgrounds, spread fill, rotation markers, panel theme, panel position, and panel font size can all be adjusted depending on the chart style and workspace preference. Limitations & Transparency This script is not a forecasting model. It does not know future direction and it does not attempt to predict exact reversal points. It is a structural pressure tool built from DMI behavior. Like all DMI-based studies, it can become noisy in highly erratic or mean-reverting conditions. Repeated +DI and -DI handoffs may appear during choppy phases, especially on lower timeframes or during indecisive sessions. Compression readings should not be interpreted as guaranteed breakout setups. Compression only describes a tight directional contest inside the DI structure. Direction still needs confirmation from price behavior, market structure, volatility regime, or other contextual tools. Bullish or bearish control states do not guarantee continuation. They only indicate that the directional pressure model currently favors one side. Users should evaluate the output alongside price structure, support/resistance, volume behavior, and timeframe context. This study is best treated as a directional pressure map, not as a standalone trading system. Risk Disclosure This script is for chart analysis and research purposes only. It does not provide financial, investment, or trading advice. Markets involve risk, and indicator-based decisions can result in losses. Always use independent judgment, confirm with broader market context, and apply appropriate risk management.
مؤشر Pine Script®
من ‎AGProLabs‎
1
AG Pro ADX Trend Pressure [AGPro Series]AG Pro ADX Trend Pressure Overview / What it does AG Pro ADX Trend Pressure is an overlay indicator that reframes ADX from a simple trend-strength reading into a pressure-state model. Instead of asking only whether ADX is high or low, the script evaluates how directional pressure is building, persisting, fading, or transitioning. The goal is to make ADX-based information easier to interpret directly on the price chart. This script is designed for traders who want more structure than a standard ADX line, but without turning the chart into a fully automated signal engine. It combines ADX behavior, DI dominance, persistence, and cooling behavior into a state-driven visual framework. The result is a chart-first tool that emphasizes current pressure conditions rather than isolated threshold events. The indicator uses a compact pressure ribbon, state labels, background zones, and a summary panel to show whether the market is in Compression, Early Expansion, Bull Pressure, Bear Pressure, Exhaustion, or Transition. These states are not predictions. They are structured interpretations of directional pressure conditions based on the current and recent bar sequence. Because the script is plotted directly on the chart, it is intended to help with visual context, workflow organization, and directional reading. It can be used as a companion layer for discretionary analysis, structure work, trend continuation review, or pressure-fading observation. Unique Edge The main distinction of this script is that it does not present ADX as a standalone oscillator. Instead, it treats ADX as one component inside a broader pressure-state engine. Its core difference is the shift from: - “ADX is high or low” to: - “directional pressure is building” - “directional pressure is confirmed” - “pressure is cooling” - “dominance is fading” - “state transition risk is rising” That distinction matters because many ADX-based tools stop at strength confirmation. This script tries to describe the condition around that strength: whether it is forming, maturing, weakening, or rotating. Methodology The script is built around a composite pressure score derived from several internal components: 1) ADX level The script evaluates the current ADX value as a measure of directional strength participation. 2) ADX slope It also measures whether ADX is accelerating or decelerating. This helps distinguish between pressure expansion and pressure cooling. 3) DI dominance The spread between +DI and -DI is used to determine whether one side is meaningfully dominant, rather than merely fluctuating. 4) Persistence Directional pressure becomes more meaningful when dominance remains intact across multiple bars. The script therefore normalizes persistence and includes it in the state logic. 5) Cooling behavior The model penalizes conditions where momentum of pressure is fading, DI separation is shrinking, or a prior strong phase is losing quality. These components are blended into a normalized pressure score and then interpreted through rule-based state conditions. Pressure States Compression Used when ADX is relatively weak, DI separation is limited, and the directional structure is not sufficiently active. Early Expansion Used when pressure begins to build but has not yet qualified as confirmed directional pressure. Bull Pressure Used when bullish directional dominance is active and the pressure score is strong enough to confirm a bullish pressure phase. Bear Pressure Used when bearish directional dominance is active and the pressure score is strong enough to confirm a bearish pressure phase. Exhaustion Used when a previously strong pressure phase begins to cool materially and loses quality without yet becoming a clean opposite pressure phase. Transition Used when dominance quality deteriorates, directional structure rotates, or the market appears to be moving between pressure states. Visual Structure The script uses several chart elements to organize the pressure reading: Pressure Ribbon A compact ribbon below price summarizes the active pressure state without requiring a separate pane. Pressure Curve The center curve makes the pressure structure easier to read visually and helps distinguish calm phases from active directional phases. State Labels Labels appear only on state changes, helping reduce repeated label noise while still marking meaningful transitions. Background Zones Optional background zones provide broader regime context for stronger phases. Summary Panel The panel reports: - State - Pressure Score - Directional Bias - Pressure Phase - Persistence - Cooling Risk These fields are intended to help the user interpret the current environment quickly without depending on a single line crossing or a single fixed threshold. How to use it This indicator is best used as a contextual tool rather than a standalone trade trigger. Examples of practical use: - Identify when a directional move is only beginning to organize - Separate confirmed pressure from weak expansion - Observe when a mature pressure phase begins to cool - Spot when directional quality is fading into transition - Add structure to trend-following or pullback workflows Some users may prefer to read Bull Pressure and Bear Pressure as confirmation states, while using Early Expansion and Transition as cautionary context. Others may use Exhaustion to review whether a strong move is beginning to lose internal quality. The script does not enforce a single interpretation model. Signals & Alerts The script includes deterministic alert conditions for: - Bullish Pressure Building - Bearish Pressure Building - Pressure State Shift - Pressure Cooling - Transition Risk Rising These alerts are state-based notifications. They are not promises of continuation, reversal, or outcome. Their purpose is to notify the user that the internal pressure regime has changed according to the script’s rules. Key Inputs ADX Length Controls the primary ADX and DMI calculation length. DI Smoothing Applies smoothing to directional movement components before pressure analysis. Pressure Threshold Sets the score level required before directional pressure can be confirmed. Neutral ADX Threshold Defines the area where the script becomes more willing to classify conditions as compression instead of directional pressure. Cooling Sensitivity Controls how quickly the script responds to deteriorating pressure structure. Transition Sensitivity Controls how readily the script recognizes potential regime rotation or dominance loss. Persistence Length Defines how persistence is normalized in the internal score model. Minimum DI Gap Sets the minimum meaningful separation between +DI and -DI. Curve Smooth Length Adjusts how smooth or reactive the pressure drawing appears on the chart. Visual Controls The script also includes display settings for: - Pressure Ribbon - Pressure Curve - Active Pressure Spotlight - Background Zones - State Labels - Label Size - Panel Theme - Panel Font Size - Panel Position Limitations & Transparency This script is not a prediction model. It does not forecast future price direction. It does not guarantee trend continuation. It does not guarantee reversal timing. It does not replace risk management. Like all state-based indicators, it can respond differently depending on volatility regime, market structure, timeframe, and instrument behavior. Strong trends, choppy ranges, and abrupt news-driven moves may produce very different state sequences. The pressure score is an internal composite reading. It should not be interpreted as a universal probability measure. A score of 70 does not mean a 70 percent chance of success. It only means the current internal pressure components are stronger than they were in lower-score conditions. Users should also be aware that background context and label placement are visual aids. The most important output is not the label itself, but the broader relationship between state, pressure score, bias, and how the curve behaves through time. Who this script may be useful for This script may be useful for traders who: - already use ADX or DMI and want more chart context - want a state-based trend pressure overlay - prefer workflow tools over one-click signal tools - want a compact visual reading of directional pressure behavior It may be less suitable for users looking for a pure oscillator pane, a fully automated strategy, or a single-entry single-exit signal framework. Risk Disclosure This indicator is for chart analysis and workflow support only. It is not financial advice. It should not be treated as a standalone trade instruction. Markets are risky, and no indicator can eliminate uncertainty. Use independent judgment, confirm with your own process, and apply risk management appropriate to your market and timeframe.
مؤشر Pine Script®
من ‎AGProLabs‎
1
Dynamic Pivot Structure [DPS]Dynamic Pivot Structure (DPS) is a price structure analysis tool that automatically detects pivot points, classifies market structure (HH, HL, LH, LL), and generates dynamic support/resistance zones with mitigation tracking. **Mathematical Foundation:** The indicator uses the standard pivot point detection algorithm with configurable left and right bar confirmations. A pivot high is confirmed when the high of a bar is greater than the highs of all N bars to its left and N bars to its right. Similarly for pivot lows. This provides mathematically validated local extremes rather than arbitrary level selection. Market structure classification follows the Dow Theory framework: Higher Highs (HH) and Higher Lows (HL) define uptrends; Lower Highs (LH) and Lower Lows (LL) define downtrends. The indicator tracks consecutive pivot sequences and labels each new pivot with its structural classification. Support and resistance zones are generated around each pivot using the Average True Range (ATR) for zone width. This creates proportional zones that automatically adjust to the instrument's volatility. The indicator tracks zone mitigation — when price penetrates a zone, it is marked as mitigated and visually faded. **Signal Logic:** Buy signals fire when price is near an unmitigated support zone, above the trend EMA, with RSI below 40 or bullish structure (HH/HL), and ADX confirming a trending environment. Sell signals fire near resistance with bearish conditions. **Features:** - Automatic pivot high/low detection with adjustable sensitivity - Market structure classification (HH, HL, LH, LL) - Dynamic ATR-based support and resistance zones - Zone mitigation tracking with visual feedback - ADX trend strength filter - Trend EMA overlay - Dashboard showing structure type, ADX, and proximity status
مؤشر Pine Script®
من ‎Jamtrader2020‎
High-Momentum Option Breakout(MastersinMarkets)Overview The High-Momentum Option Breakout is a technical tool designed to identify high-probability volatility expansions in equity indices. By combining price action breakouts with trend, strength, and volume filters, it aims to pinpoint specific windows where momentum is likely to accelerate. How It Works The script utilizes a multi-layered confirmation process to reduce "fakeouts" often found in standard breakout systems: Breakout Engine: It monitors a user-defined lookback period to establish dynamic upper and lower bands based on recent price extremes. Trend Hierarchy: A 200-period Exponential Moving Average (EMA) acts as a high-timeframe filter, ensuring signals align with the broader market regime. Strength Filter (ADX): To confirm momentum, the script requires the Average Directional Index (ADX) to be above a specific threshold (default 20), indicating a trending environment rather than a sideways churn. Volume Confirmation: Signals are only triggered when current volume exceeds the 20-period average, suggesting institutional participation in the move. Dynamic Risk Management: The indicator plots a trailing exit level based on the Average True Range (ATR), which adjusts to market volatility to help protect capital. How to Use Long Bias (BUY CE): Triggered when price crosses above the upper band while trading above the 200 EMA with rising ADX and high volume. Short Bias (BUY PE): Triggered when price crosses below the lower band while trading below the 200 EMA with rising ADX and high volume. Momentum Exit: While the ATR-based stop is the primary defense, the script also suggests an exit if ADX begins to fall, signaling that the immediate momentum "steam" may be dissipating. Originality and Value This script is unique because it integrates momentum decay (falling ADX) as a specific exit trigger tailored for option buyers who need to manage time decay (Theta). It automates the confluence of four distinct technical pillars into a single, non-repainting visual interface. Risk Disclaimer Trading involves significant risk. This indicator is a tool for analysis and does not guarantee future profits. Past performance, including the visual signals shown on this chart, is not indicative of future results. Users should always use independent judgment and proper position sizing.
مؤشر Pine Script®
من ‎MastersinMarkets‎
Prismatic Trend Matrix [JOAT]Prismatic Trend Matrix Introduction The Prismatic Trend Matrix is an advanced open-source multi-dimensional trend analysis system that combines Hull Moving Average, SuperTrend, ADX strength filtering, and moving average confluence into a unified trend detection engine. This indicator analyzes trend across multiple dimensions simultaneously, creating a prismatic view of market direction with gradient visualization that reveals trend strength and conviction. Unlike single-indicator trend systems, the Prismatic Trend Matrix provides multi-layered trend intelligence through Hull MA smoothing, SuperTrend band analysis, ADX strength measurement, and EMA/SMA alignment detection. The indicator is designed for traders who understand that strong trends require confirmation across multiple analytical dimensions. Why This Indicator Exists This indicator addresses the need for comprehensive trend analysis that goes beyond simple moving averages. By combining four distinct trend methodologies with gradient visualization, it reveals: Hull Moving Average: Weighted moving average with reduced lag for responsive trend detection SuperTrend Component: ATR-based bands that identify trend direction and support/resistance ADX Strength Filter: Measures trend strength to separate strong trends from weak/choppy conditions Moving Average Matrix: Three EMAs and two SMAs create alignment-based trend confirmation Trend Classification: Five-state system (Strong Bull, Weak Bull, Sideways, Weak Bear, Strong Bear) Counter-Trend Detection: Identifies potential reversals when price moves against established trend Prismatic Gradient: Visual fill between Hull MA and SuperTrend shows trend intensity Core Components Explained 1. Hull Moving Average (HMA) The Hull MA uses weighted moving averages to create a smooth trend line with minimal lag: The calculation involves three steps: Step 1: Calculate WMA of half-length period Step 2: Calculate WMA of full-length period Step 3: Calculate WMA of the difference using square root of length The result is a moving average that responds quickly to price changes while maintaining smoothness. The indicator applies additional EMA smoothing (default 3 periods) to reduce noise. 2. SuperTrend Calculation SuperTrend uses ATR-based bands to identify trend direction: Source: Average of high and low (HL2) Upper Band: Source + (ATR × Factor) Lower Band: Source - (ATR × Factor) Direction: Bullish when close > upper band, bearish when close < lower band Three modes control band adjustment: Strict Mode: Bands adjust only when price crosses or previous band is breached Quick Mode: Bands adjust when price crosses previous band Quicker Mode: Bands adjust immediately with price SuperTrend provides dynamic support/resistance levels that adapt to volatility. 3. ADX Strength Measurement The Average Directional Index measures trend strength: DI+ (Directional Indicator Plus): Measures upward directional movement DI- (Directional Indicator Minus): Measures downward directional movement ADX: Smoothed average of the difference between DI+ and DI-, normalized Threshold: ADX above threshold (default 25) indicates strong trend Rising ADX: Indicates strengthening trend momentum ADX filters out weak trends and choppy conditions, ensuring signals occur only during strong directional movement. 4. Moving Average Matrix Five moving averages create a trend alignment system: Fast EMA (9): Short-term trend direction Medium EMA (21): Intermediate trend direction Slow EMA (50): Primary trend direction Fast SMA (50): Smoothed primary trend Slow SMA (200): Long-term institutional trend Alignment is measured by comparing the order of these averages: Bullish Alignment: EMA9 > EMA21 > EMA50 > SMA50 (all in ascending order) Bearish Alignment: EMA9 < EMA21 < EMA50 < SMA50 (all in descending order) Mixed Alignment: Averages not in order (choppy or transitional conditions) Perfect alignment indicates strong institutional conviction in the trend direction. 5. Composite Trend Classification [/b> The indicator combines all components into a five-state trend classification: Strong Bull (State 2): Hull rising + SuperTrend bullish + MA alignment bullish + ADX strong Weak Bull (State 1): Hull rising + (SuperTrend bullish OR MA alignment bullish) Sideways (State 0): Mixed signals or weak trend conditions Weak Bear (State -1): Hull falling + (SuperTrend bearish OR MA alignment bearish) Strong Bear (State -2): Hull falling + SuperTrend bearish + MA alignment bearish + ADX strong This classification provides clear trend assessment at a glance. 6. Counter-Trend Detection [/b> The indicator identifies potential reversals when price moves against established trend: Counter-Trend Bull: Trend state neutral/bearish + close > open + price rising + DI+ > DI- + close > Hull + ADX > 20 Counter-Trend Bear: Trend state neutral/bullish + close < open + price falling + DI- > DI+ + close < Hull + ADX > 20 Counter-trend signals include anti-overlap logic to prevent signal clustering and ensure clean placement. 7. Prismatic Gradient Visualization The indicator creates a gradient fill between Hull MA and SuperTrend: Gradient Layers: Multiple intermediate values calculated between Hull and SuperTrend (default 15 layers) Color Intensity: Transparency increases from Hull (solid) to SuperTrend (transparent) Dynamic Coloring: Gradient color matches trend state (green = bullish, red = bearish, cyan = sideways) Visual Effect: Creates a glowing prismatic effect that emphasizes trend strength The gradient provides intuitive visual feedback on trend intensity and direction. 8. Platform Levels Platform levels are horizontal lines at the current Hull MA value: Extension: Lines extend forward and backward from current bar (default 7 bars each direction) Color Coding: Platform color matches current trend state Purpose: Provides visual reference for potential support/resistance at Hull MA level Platforms help identify key levels where price may find support or resistance. Visual Elements Hull Trend Line: Thick line (3px) with regime-based coloring showing primary trend SuperTrend Line: Medium line (2px) with step-line style showing dynamic support/resistance EMA Matrix: Three thin lines showing fast, medium, and slow EMAs with transparency Prismatic Gradient: Multi-layer fill between Hull and SuperTrend creating glow effect Platform Levels: Horizontal lines at Hull MA value extending forward/backward Counter-Trend Signals: Triangles marking potential reversal points Background Coloring: Subtle background tint for strong bull/bear states Information Dashboard: Displays trend state, Hull direction, ADX strength, momentum, alignment, SuperTrend, DI balance, price vs Hull, gradient zone, counter-trend status, and signal How to Use This Indicator Step 1: Check Trend State Monitor the dashboard for current trend state (Strong Bull, Weak Bull, Sideways, Weak Bear, Strong Bear). Trade in the direction of strong states. Step 2: Verify ADX Strength Ensure ADX is above threshold (default 25) for strong trends. Low ADX indicates choppy conditions - avoid trend-following strategies. Step 3: Confirm MA Alignment Check if moving averages are aligned (Bullish/Bearish/Mixed). Perfect alignment confirms institutional conviction. Step 4: Monitor Hull Direction Hull rising = bullish bias, Hull falling = bearish bias. Hull provides the primary trend direction signal. Step 5: Use SuperTrend for Support/Resistance SuperTrend line acts as dynamic support in uptrends and resistance in downtrends. Breaks of SuperTrend warn of trend changes. Step 6: Watch for Counter-Trend Signals Counter-trend signals at extreme levels may indicate reversals. Use these cautiously and confirm with other factors. Step 7: Assess Gradient Zone Price in upper gradient zone (near Hull) = strong trend, price in lower zone (near SuperTrend) = weak trend or potential reversal. Best Practices Trade only in Strong Bull or Strong Bear states for highest probability Avoid trading in Sideways state - wait for clear trend establishment Use ADX as a filter - only trade when ADX > 25 for strong trends Confirm trend with MA alignment before entering positions Use SuperTrend as trailing stop level in trending markets Counter-trend signals work best at extreme levels with divergence Monitor gradient zone - price near SuperTrend may indicate trend exhaustion Combine with higher timeframe trend for additional confirmation Input Parameters Hull Trend Engine: Hull Length: Period for Hull MA calculation (default: 20) Hull Smoothing: Additional EMA smoothing (default: 3) SuperTrend Layer: ATR Period: Period for ATR calculation (default: 10) ATR Factor: Multiplier for band width (default: 3.0) Mode: Strict, Quick, or Quicker (default: Quick) Trend Strength: ADX Length: Period for ADX calculation (default: 14) ADX Smoothing: Smoothing period for ADX (default: 14) Strength Threshold: Minimum ADX for strong trend (default: 25) MA Matrix: Fast EMA: Short-term EMA (default: 9) Medium EMA: Intermediate EMA (default: 21) Slow EMA: Primary EMA (default: 50) Fast SMA: Smoothed primary (default: 50) Slow SMA: Long-term institutional (default: 200) Visual Configuration: Bullish/Bearish Trend Colors: Customizable colors for trend states Sideways/Weak Trend Colors: Colors for neutral and weak states Gradient Layers: Number of gradient fills (default: 15) Show Platforms: Toggle platform level display (default: enabled) Platform Extension: Bars to extend platforms (default: 7) Originality Statement This indicator is original in its multi-dimensional trend approach. While individual components (Hull MA, SuperTrend, ADX, EMAs) are established concepts, this indicator is justified because: It combines four distinct trend methodologies into a unified classification system The five-state trend classification provides clear trend assessment Prismatic gradient visualization creates intuitive trend intensity display Counter-trend detection with anti-overlap logic identifies potential reversals MA alignment analysis measures institutional conviction Integration of Hull MA smoothness with SuperTrend adaptability creates balanced trend detection The comprehensive dashboard presents all trend dimensions simultaneously Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Trend analysis does not guarantee profitable trades. Past trends do not guarantee future trends. Always use proper risk management and never risk more than you can afford to lose. -Made with passion by officialjackofalltrades
مؤشر Pine Script®
من ‎officialjackofalltrades‎
Trend Quality Score (TQS)Trend Quality Score (TQS) is a composite indicator designed to evaluate the strength, direction, and consistency of a trend in a single normalized signal. The indicator combines three core components derived from price action and directional movement: Directional Strength – Measures the relative dominance of buyers vs. sellers using the difference between +DI and -DI. Trend Strength (DX) – Captures the magnitude of directional movement, smoothed to reduce noise. Trend Persistence – Evaluates how consistently price has been moving in one direction over a defined lookback period. These components are weighted and combined into a single score (TQS), which fluctuates around zero: Positive values indicate upward trend conditions Negative values indicate downward trend conditions Values near zero suggest weak or non-trending markets A configurable moving average can be applied to TQS to help identify shifts in trend quality and improve signal clarity. Key Features Combines strength, direction, and persistence into one metric Helps distinguish strong trends from choppy conditions Customizable smoothing and moving average type (SMA, EMA, WMA, RMA) Suitable for trend confirmation, filtering trades, or regime detection How to Use Use TQS above zero to confirm bullish conditions and below zero for bearish conditions Look for crossovers between TQS and its moving average as potential shifts in trend quality Avoid trading when TQS is near zero, as this indicates low-quality or sideways markets This indicator is designed as a confirmation and filtering tool and works best when combined with a broader trading strategy.
مؤشر Pine Script®
من ‎TechnicallyNotFinancialAdvice‎
1
Price Structure Zones with Trend Filter SignalsWhat the script is This is a two-engine trading system combining two independent but complementary methodologies: Engine 1 — Camarilla Pivot Zones (the "map") Camarilla pivots are price levels derived from the previous period's High, Low, and Close. They act like a gravitational grid — price tends to bounce between these levels intraday. There are 5 resistance levels (U1–U5) above the previous close and 5 support levels (D1–D5) below it. The formulas are fixed constants from Franklin Ochoa's Secrets of a Pivot Boss. Engine 2 — Momentum/ADX Filter + Range Filter (the "trigger") The ADX (Average Directional Index) measures trend strength, not direction. When ADX is below your threshold, the market is consolidating/ranging. The script then applies a Range Filter — a smoothed band around price — to detect the precise moment price breaks out of that consolidation. That breakout becomes your entry signal, complete with SL and TP levels. How to read each level: U1 / D1 & U2 / D2 — Minor friction zones. Price often pauses or wicks here but doesn't reverse hard. Not great for entries; good for partial profit-taking. U3 / D3 — The "decision zone." Price respecting U3 (failing to break above) is a short signal; price holding D3 (bouncing off support) is a long signal. These are your primary reversal trade zones. U4 / D4 — The breakout threshold. A clean daily close above U4 = strong bullish momentum. Below D4 = strong bearish momentum. These are your breakout continuation entries. U5 / D5 — Extreme exhaustion / spike targets. Rarely reached but useful as hard TP or warning zones when reached intraday. How to trade the signals- Two distinct trade setups exist: Setup A — Reversal trade at U3/D3 When price approaches U3 from below and the ADX signal fires short (range filter steps down), that is a high-probability short. Entry at the close of the signal bar, SL above U4, TP1 at U1/MID, TP2 at D1. The reverse logic applies at D3 for longs. This is the bread-and-butter setup — it works best in ranging/sideways markets. Setup B — Breakout trade above U4 / below D4 When price breaks and closes above U4 with the ADX signal firing long, that is a momentum continuation trade. This one requires the ADX to have been low (consolidating) before the breakout — the script's cooldown and range detection ensure you're catching the first pop out of compression, not a late chase. How SL and TP are calculated by the script: The risk levels are multiples of the Band Radius (a smoothed ATR-like measure). By default: SL = 0.4× band radius, TP1 = 0.5× band radius, TP2 = 1.0× band radius. This gives you roughly a 1.25:1 reward-to-risk on TP1 — conservative and achievable. TP2 is disabled by default; enable it for trending markets. Best timeframes: The pivot resolution (currently set to Daily "D") is independent of your chart timeframe. Here's how to think about it: Pivot resolution "D" (Daily pivots) works best on: 5-minute to 30-minute charts for intraday scalping and day trading 1-hour charts for intraday swing entries These are the most commonly used Camarilla applications Pivot resolution "W" (Weekly pivots) works best on: 1-hour to 4-hour charts Good for swing traders holding 2–5 days Pivot resolution "M" (Monthly pivots) works best on: Daily charts Good for position traders holding weeks to months Practical tips: Confluence is everything. The best trades happen when the ADX signal fires exactly at a U3 or D3 level. An ADX signal in the middle of nowhere between levels is lower quality — skip it or reduce size. Avoid trading through major news. The script has no awareness of fundamental events. If a signal fires 10 minutes before a Budget/central bank/RBI announcement, stand aside. The cooldown bar setting (default 20) prevents re-entry too soon after a signal. On faster timeframes (5m), you may want to reduce it to 8–12. On 4H/Daily, increase it to 30–50. On Indian markets specifically (NSE/BSE): Daily pivots on a 15-minute chart work very well for Nifty 50, Bank Nifty, and individual large-cap stocks. The 9:15–10:00 opening range often sets the tone, and U3/D3 levels tend to act as strong intraday magnets. Watch for the first ADX signal after 10:00 AM IST when the opening volatility has settled. Past statistical behavior does not guarantee future results — use as context, not as a signal in isolation. Enjoy !!
مؤشر Pine Script®
من ‎kingshukghosh71‎
3