Ripster Clouds + Saty Pivot + RVOL + Trend1. Ripster EMA Clouds (local + higher timeframe)
Local timeframe (your chart TF):
Plots up to 5 EMA clouds (8/9, 5/12, 34/50, 72/89, 180/200 – configurable).
Each cloud is:
One short EMA and one long EMA.
A filled band between them.
Color logic:
Cloud is bullish when short EMA > long EMA (green/blue-ish tone).
Bearish when short EMA < long EMA (red/orange/pink tone).
You can choose:
EMA vs SMA,
Whether to show the lines,
Per-cloud toggles.
MTF Clouds:
Two higher-timeframe EMA clouds:
Cloud 1: 50/55
Cloud 2: 20/21
Computed on a higher TF (default D, but configurable).
Show as thin lines + transparent bands.
Used for:
Visual higher-TF trend,
Optional signal filter (MTF must agree for trades).
2. Saty Pivot Ribbon (time-warped EMAs)
This is basically your Saty Pivot Ribbon integrated:
Uses a “Time Warp” setting to overlay EMAs from another timeframe.
EMAs:
Fast, Pivot, Slow (defaults 8 / 21 / 34).
Clouds:
Fast cloud between fast & pivot EMAs.
Slow cloud between pivot & slow EMAs.
Bullish/bearish colors are distinct from Ripster colors.
Optional highlights:
Can highlight fast/pivot/slow lines separately.
Conviction EMAs:
13 and 48 EMAs (configurable).
When fast conviction EMA crosses over/under slow:
You get triangle arrows (bullish/bearish conviction).
Bias candles:
If enabled, candles are recolored based on:
Price vs Bias EMA,
Candle up/down/doji,
So you see bullish/bearish “bias” directly in candle colors.
3. DTR vs ATR panel (range vs average)
In a small table panel (bottom-center by default):
Computes higher-TF ATR (default 14, TF auto D/W/M, smoothing type selectable).
Measures current range (high–low) on that TF.
Displays:
DTR: X vs ATR: Y Z% (+/-Δ% vs prev)
Where:
Z% = current range / ATR * 100.
Δ% = change vs previous bar’s Z%.
Background color:
Greenish for low move (<≈70%),
Red for high move (≥≈90%),
Yellow in between,
Slightly dimmed when price is below bias EMA.
This tells you: “Is today an average, quiet, or explosive day compared to normal?”
4. SMA Divergence panel
Separate histogram & line panel:
Fast and slow SMAs (default 14 & 30).
Computes price divergence vs SMA in %:
% above/below slow SMA,
% above/below fast SMA.
Shows:
Slow SMA divergence as a semi-transparent column,
Fast SMA divergence as a solid column on top,
EMA of the slow divergence (trend line) colored:
Blue when rising,
Orange/red when falling.
Static upper/lower bands with fill, plus optional zero line.
This gives you a feel for how stretched price is vs its anchors.
5. RVOL table (relative volume)
Small 3×2 table (bottom-right by default):
Inputs:
Average length (default 50 bars),
Optionally show previous candle RVOL.
Calculates:
RVOL now = volume / avg(volume N bars) * 100,
RVOL prev,
RVOL momentum (now – prev) for data window only.
Table columns:
Candle Vol,
RVOL (Now),
RVOL (Prev).
Colors:
200% → “high RVOL” color,
100–200% → “medium RVOL” color,
<100% → “low RVOL” color,
Slightly dimmer if price is below bias EMA.
This is used both visually and optionally as a signal filter (e.g., only trade when RVOL ≥ threshold).
6. Trend Dashboard (Price + 34/50 + 5/12)
Top-right trend box with 3 rows:
Price Action row:
Uses either Bias EMA or custom EMA on close to say:
Bullish (close > trend EMA),
Bearish (close < trend EMA),
Flat.
Ripster 34/50 Cloud row:
Uses 34/50 EMAs: bullish if 34>50, bearish if 34<50.
Ripster 5/12 Cloud row:
Uses 5/12 EMAs: bullish if 5>12, bearish if 5<12.
Then it does a vote:
Counts bullish votes (Price, 34/50, 5/12),
Counts bearish votes,
Depending on mode:
Majority (2 of 3) or Strict (3 of 3).
Output:
Overall Bullish / Bearish / Sideways.
You also get an optional label on the chart like
Overall: Bullish trend with color, and an optional background tint (green/red for bull/bear).
7. VWAP + Buy/Sell Signals
VWAP is plotted as a white line.
Fast “trend” cloud mid: average of 5 & 12 EMAs.
Slow “trend” cloud mid: average of 34 & 50 EMAs.
Buy condition:
5/12 crosses above 34/50 (bullish cloud flip),
Price > VWAP,
Optional filter: MTF Cloud 1 bullish (50/55 on higher TF),
Optional filter: RVOL >= threshold.
Sell condition:
5/12 crosses below 34/50,
Price < VWAP,
Optional same filters but bearish.
When conditions are met:
Plots BUY triangle up below price (distinct teal/green tone).
Plots SELL triangle down above price (distinct magenta/orange tone).
Alert conditions are defined for:
BUY / SELL signals,
Overall Bullish / Bearish / Sideways change,
MTF Cloud 1 trend flips.
8. Data Window metrics
For easy backtesting / inspection via TradingView’s data window, it exposes:
DTR% (Current) and DTR% Momentum,
RVOL% (Now), RVOL% (Prev), RVOL% Momentum.
TL;DR – What does this script do for you?
It turns your chart into a multi-framework trend and momentum dashboard:
Ripster EMA clouds for short/medium trend & S/R.
Saty Ribbon for higher-TF pivot structure and conviction.
RVOL + DTR/ATR for context (is this a big and well-participated move?).
SMA divergence panel for overextension/stretch.
A compact trend table that tells you Price vs 34/50 vs 5/12 in one glance.
Buy/Sell markers + alerts when:
short-term Ripster trend (5/12) flips over/under medium (34/50),
price agrees with VWAP,
plus optional filters (MTF trend and / or RVOL).
Basically: it’s a trend + confirmation + context system wrapped into one indicator, with most knobs configurable in the settings.
نماذج فنيه
Market + Direction + Entry + Hold + Exit v1.5 FINALIndicator Description
Market + Direction + Entry + Hold + Exit is a rule-based intraday trading indicator designed to identify high-quality trend opportunities while filtering out low-probability market conditions.
Instead of relying on a single signal, this indicator combines market activity, trend direction, momentum, structure, and pullback logic into one unified framework. It is built to support disciplined, rule-driven trading rather than discretionary or predictive approaches.
Core Logic
The indicator operates through a multi-layer confirmation process.
First, it evaluates whether the market is active enough to trade. Market activity is determined by volatility expansion, volume participation, and price displacement from VWAP. When sufficient activity is detected, the indicator allows trades to be considered.
Next, directional bias is defined using exponential moving averages and price positioning. This creates a clear long-only or short-only environment and helps avoid counter-trend trades.
Entry Structure
Entries are based on pullbacks within an established trend rather than breakout chasing.
The first valid pullback is marked as the initial entry. If the trend continues and additional controlled pullbacks occur, re-entry opportunities are identified and labeled sequentially. This structure helps traders scale into trends in a systematic and measured way.
Hold Confirmation
While a position is active, the indicator provides hold confirmation using momentum alignment and candle behavior. This is designed to help traders remain in strong trends and reduce premature exits during normal pullbacks.
Exit Logic
Exit signals appear only when two conditions align: market structure failure and clear trend weakening. This approach avoids exits based on minor price noise and focuses on objective trend invalidation.
Intended Use
This indicator is designed for intraday trading and scalping on indices, futures, and cryptocurrency markets. It performs best on lower to mid timeframes such as 3-minute, 5-minute, and 15-minute charts, where trend continuation and pullback behavior are most visible.
Asset Presets
Built-in presets are provided for NQ, Gold, and BTC. Each preset automatically adjusts internal parameters such as volatility thresholds, structure sensitivity, and trend strength filtering.
Important Notes
This indicator does not predict future price movements. It is a decision-support tool designed to help traders align with market conditions, manage entries systematically, and maintain consistency. Risk management, position sizing, and execution remain the responsibility of the user.
지표 설명
Market + Direction + Entry + Hold + Exit는 시장의 흐름이 명확한 구간에서만 거래 기회를 포착하도록 설계된 규칙 기반 인트라데이 트레이딩 지표입니다.
이 지표는 단일 신호에 의존하지 않고, 시장 활성도, 추세 방향, 모멘텀, 가격 구조, 되돌림 조건을 단계적으로 결합하여 낮은 확률의 구간을 걸러내는 데 초점을 둡니다. 예측보다는 정렬과 필터링을 통해 일관된 의사결정을 돕는 것이 목적입니다.
핵심 개념
지표는 여러 단계의 조건을 순차적으로 통과해야 신호를 생성하는 구조로 설계되어 있습니다.
먼저, 현재 시장이 거래하기에 충분히 활성화되어 있는지를 판단합니다. 변동성, 거래량, VWAP 대비 가격 이탈 정도를 기준으로 시장 상태를 평가하며, 일정 기준 이상일 때만 거래를 고려합니다.
이후, 이동평균과 가격 위치를 기반으로 추세 방향을 정의하여 롱 또는 숏 한 방향만 허용합니다. 이를 통해 역추세 진입을 자연스럽게 차단합니다.
진입 구조
진입은 돌파가 아닌 추세 내 되돌림을 기준으로 설계되어 있습니다.
첫 번째 유효한 되돌림 구간을 초기 진입으로 표시하며, 추세가 유지되는 동안 추가적인 되돌림이 발생할 경우 재진입 기회를 순차적으로 제공합니다. 이러한 구조는 감정적인 물타기가 아닌, 규칙 기반의 분할 진입을 가능하게 합니다.
홀드 신호
포지션 보유 중에는 모멘텀 정렬과 캔들 흐름을 통해 추세 지속 여부를 확인할 수 있습니다. 이를 통해 정상적인 조정 구간에서는 성급한 청산을 줄이고, 추세가 유지되는 동안 포지션을 안정적으로 관리할 수 있도록 돕습니다.
청산 로직
청산 신호는 가격 구조 붕괴와 추세 약화가 동시에 확인될 때만 발생합니다. 단기적인 노이즈에 의한 잦은 청산을 피하고, 추세가 객관적으로 무너지는 구간에 집중하도록 설계되었습니다.
활용 대상
이 지표는 인트라데이 트레이딩과 스캘핑에 적합하며, 지수, 선물, 암호화폐 시장에서 활용할 수 있습니다. 특히 3분, 5분, 15분 차트에서 추세와 되돌림 구조가 명확하게 나타나는 환경에서 효과적입니다.
자산 프리셋
NQ, Gold, BTC에 대해 사전 설정된 프리셋이 제공되며, 각 자산의 변동성과 특성에 맞게 내부 파라미터가 자동으로 조정됩니다.
유의 사항
본 지표는 가격의 미래를 예측하지 않습니다. 시장 환경을 정리하고 거래 판단을 보조하는 도구로서 사용되며, 손절 기준과 포지션 사이즈 관리는 사용자 책임입니다.
FVG DUAL HTF ALERTS FINAL DG FVG Dual HTF - Advanced Fair Value Gap Detector with Confluence & Strength Analysis
Professional-grade Fair Value Gap (FVG) detection system designed for precision trading on Gold and other instruments.
🎯 Key Features
Dual Higher Timeframe Analysis
HTF1 & HTF2 Detection: Simultaneously monitors two higher timeframes (default: 15min & 60min) for Fair Value Gaps
Multi-timeframe Confluence: Automatically detects when FVGs align across multiple timeframes for high-probability setups
Customizable Timeframes: Choose from 5min, 15min, 60min, 4H, or Daily for each HTF
Intelligent Strength Scoring System (0-11 Scale)
Our proprietary algorithm rates each FVG based on:
Gap size relative to ATR
Volume analysis vs. average
Current timeframe confluence (★ symbol indicates FVG exists on your chart timeframe)
Session timing (London & New York priority)
HTF confluence bonus
Color-Coded Ratings:
🟢 Lime (8-11): Premium strength - highest probability setups
🟡 Yellow (5-7): Good strength - solid opportunities
⚪ Gray (0-4): Weak strength - proceed with caution
Sweet Spot Entry Zones
Inner Box Technology: Highlights the optimal 10% entry zone within each FVG
BUY/SELL Labels: Clear visual cues for directional bias
Automatic Entry/Stop/Target Lines: Shows precise risk-reward setups on the 3 nearest FVGs
Position Sizing Calculator: Displays dollar values based on your lot size
Advanced Fill Methods
Choose how FVGs are invalidated:
Wick Sweep: Most conservative - requires price to sweep through the gap
Any Touch: Price touches the FVG boundary
Midpoint Reached: 50% fill required
Body Beyond: Strictest - candle body must close through the gap
Comprehensive Market Intelligence Table
Real-time monitoring of:
Gold Daily & Hourly Bias (with pip movement)
BTC Daily & Hourly Bias (optional)
Distance to nearest Bull/Bear FVGs
IN ZONE Indicator: 🔥 Alerts when price enters premium sweet spots
Shows strength rating and HTF source
Color-coded: Premium / Good / Weak / Out
Professional Alert System
HTF1 & HTF2 Zone Entry Alerts
Sweet Spot Entry Alerts (BUY/SELL)
High-Strength FVG Alerts (8+ rating)
Combined "ANY HTF" alerts for maximum flexibility
📊 Default Configuration
Optimized for Gold (XAU/USD) on 3-minute charts
Session Focus: London (8am-12pm GMT) & New York (1:30pm-4pm GMT)
Risk Management: Built-in R:R calculator with customizable stops and targets
🎨 Customization Options
Multiple color schemes for bull/bear zones
Adjustable inner box percentage
Confluence highlighting (bright colors when HTF1 & HTF2 align)
Show/hide individual components
BTC correlation tracking (optional)
⚙️ Technical Specifications
Maximum Display: Up to 50 FVGs per type (HTF1 Bull/Bear, HTF2 Bull/Bear)
Fill Tracking: Monitors touched vs. untouched zones
Lookback Period: Configurable (default: 100 bars for current TF confluence)
Body Close Requirement: Optional strict mode for cleaner signals
📈 Best Used For
Gold (XAU/USD) day trading
Institutional order flow analysis
High-probability reversal setups
Multi-timeframe confirmation strategies
Risk-reward optimization
🔒 Access & Support
This is a private indicator. Contact the owner for details about access and usage.
Disclaimer: This indicator is a tool for technical analysis. Past performance does not guarantee future results. Always use proper risk management and trade responsibly.
Short Version (if space is limited):
FVG Dual HTF - Professional Fair Value Gap System
Advanced FVG detector with dual higher timeframe analysis, intelligent strength scoring (0-11), and multi-timeframe confluence detection. Features sweet spot entry zones, automatic R:R lines, real-time IN ZONE alerts, and comprehensive market intelligence table.
Highlights:
🎯 Dual HTF monitoring (15m/60m default)
⭐ Strength scoring with current TF confluence (★)
📊 Color-coded ratings: Lime (8+) / Yellow (5-7) / Gray (<5)
🎨 Sweet spot inner boxes with BUY/SELL signals
🔔 Professional alert system
💰 Built-in position sizing calculator
📈 Gold Daily/Hourly + BTC bias tracking
Optimized for Gold and BTC. Multiple fill methods, customizable colors, and extensive settings.
Contact owner for access details.
MA 50 / 100 Crossover Candle OnlyTitle:
MA 50 / 100 Crossover Candle Only — Clean Trend Shift Signals
Short Title:
MA50_100Crossover
Tags:
moving-average, crossover, trend, buy-sell, momentum, trend-following, signal, entry
Short Description:
A clean moving average crossover indicator that highlights BUY and SELL signals only on the crossover candle.
Full Description:
The MA 50 / 100 Crossover Candle Only indicator is a classic trend-following tool designed to detect major market direction changes using the crossover between two widely followed moving averages.
It focuses exclusively on the exact crossover candle, helping traders clearly identify trend shifts without cluttering the chart.
By highlighting only the crossover bar, the indicator provides a precise visual cue for potential entry points while maintaining a clean and readable chart layout.
How It Works
The indicator monitors the relationship between a fast and a slow moving average representing medium- and longer-term market behavior.
A BUY signal is generated when the faster average crosses above the slower average.
A SELL signal is generated when the faster average crosses below the slower average.
Only the candle where the crossover occurs is colored and labeled, ensuring clarity and avoiding repetitive signals.
Key Features
Classic MA crossover logic using fixed medium/long-term periods
BUY and SELL signals displayed only on the crossover candle
Clean candle coloring for immediate visual confirmation
Supports multiple MA calculation types (SMA, EMA, WMA, RMA)
Optional on-chart MA labels for clarity
Built-in alerts for both BUY and SELL signals
Compatible with all markets and timeframes
Non-repainting logic
Use Cases
Identifying medium- to long-term trend reversals
Trend-following entry confirmation
Filtering trades in trending markets
Supporting swing and position trading strategies
Confluence tool with price action or support/resistance analysis
Notes
Signals appear only at confirmed crossovers.
The indicator does not attempt to predict price; it reacts to confirmed trend shifts.
Best results are achieved when combined with proper risk management.
Disclaimer
This script is for educational and analytical purposes only and does not constitute financial advice.
Trading involves risk; always confirm signals before executing trades.
Developer
Developed by Abdulrahman Alotaibi — ATA Scripts
One Candle 5min Retest Strategy🚀 One Candle 5min Retest Strategy (OCRS) – Your Morning on Autopilot
Less drawing, more trading.
Sick of drawing the opening range manually every single morning? Or catching yourself FOMOing into trades before the candle even closes? The OCRS Indicator automates the heavy lifting for the "First Candle" / "One Candle Retest" strategy (Scarface Trades style).
It’s basically a tool to keep you honest and save you time.
🧠 Why use it?
Forced Patience: The range lines stay PURPLE while the first 5 minutes are playing out. That’s your sign to chill and wait. No early entries.
Instant Levels: Once the range closes, the lines snap to BLUE (High) and ORANGE (Low) . You see the levels immediately.
The "Zone" Finder: If price breaks out, the script finds the specific Order Block for you (the last contrary candle before the move) and draws the retest box.
Bullish Breakout? Catches the last red candle.
Bearish Breakout? Catches the last green candle.
No Confusion: Markets are messy. If price fakes a pump and then dumps, the indicator keeps the old zone and draws the new one. You see exactly what's happening.
🛠️ The Good Stuff:
Set and Forget: Auto-syncs to NY Open (09:30 EST). Works on any timeframe.
Clean Charts: Lines only run for 90 minutes. No clutter for the rest of the day.
Day Separator: A simple vertical line marks the next session. Perfect for backtesting —you know exactly when to hit pause before the next open.
No Wicks: Boxes only paint when the candle actually closes outside the range. Zero fakeouts.
Your Style: Turn boxes on/off or change colors to match your vibe.
🎯 How to trade it:
Chill for the first 5 minutes (09:30 - 09:35 NY). Purple lines = hands off.
Watch for the break.
Candle CLOSES above Blue? Wait for the Blue Box .
Candle CLOSES below Orange? Wait for the Orange Box .
The Setup: Wait for price to tap back into the box.
Entry: Find your confirmation inside that zone and take the trade.
Keep your morning simple. Install OCRS and trade with clarity.
Note: This is just a tool to help with the strategy. Risk management is still on you.
Triple MA Candle Alert - FINALTitle:
Triple MA Candle Alert — Trend Shift Buy & Sell Signals
Short Title:
Triple - MA - Alert
Tags:
moving-average, trend, crossover, buy-sell, momentum, market-structure, signal, entry
Short Description:
A triple moving average trend indicator that highlights BUY and SELL signals at confirmed trend shifts.
Full Description:
The Triple MA Candle Alert indicator is a trend-following tool designed to detect clear bullish and bearish market transitions using a three–moving-average alignment system.
It focuses on identifying moments when short-term momentum aligns decisively with the broader trend, signaling potential entry opportunities.
The indicator highlights only the initial candle of a new trend phase, helping traders avoid late entries and excessive chart noise.
How It Works
The script monitors the relationship between three moving averages representing short-, mid-, and longer-term market behavior.
A signal is triggered when these averages align in a consistent directional order, indicating a confirmed trend shift.
BUY signal: when bullish alignment begins
SELL signal: when bearish alignment begins
Only the first candle of the new alignment is highlighted to mark the transition point clearly.
Key Features
Triple moving average trend confirmation
Clear BUY and SELL signals at trend transitions
Candle coloring only on the signal bar (no repainting)
Supports multiple MA calculation types (SMA, EMA, WMA, RMA)
Optional on-chart MA labels for clarity
Built-in alerts for BUY and SELL signals
Compatible with all markets and timeframes
Use Cases
Identifying early trend reversals
Trend-following entry confirmation
Filtering trades in trending markets
Supporting swing and intraday trading strategies
Confluence tool with price action or support/resistance
Notes
Signals are generated only at confirmed trend changes.
The indicator does not repaint.
Best results are achieved when used with proper risk management and higher-timeframe trend analysis.
Disclaimer
This script is for educational and analytical purposes only and does not constitute financial advice.
Trading involves risk; always confirm signals before executing trades.
Developer
Developed by Abdulrahman Alotaibi ..
KIMATIX Silver Bullet 2.0KIMATIX Silver Bullet 2.0 is a precision-based intraday trading tool built around the most reliable market behaviors during the ICT Silver Bullet windows.
The indicator automatically identifies high-probability price delivery zones by combining time-based session logic, displacement, fair value gaps, and liquidity dynamics — without clutter or subjective interpretation.
What the indicator does
Automatically marks the three core Silver Bullet windows (New York time)
Tracks session highs and lows to define contextual liquidity
Detects displacement moves using adaptive volatility logic
Highlights valid Silver Bullet Fair Value Gaps (FVGs) only when structural conditions are met
Filters weak setups by minimum size, age, and directional confirmation
Projects FVG zones forward to monitor clean retracements
Plots liquidity levels (highs & lows) with optional mitigation handling
All calculations are done fully automatically — no manual drawing, no guessing.
Designed for
Scalper and Intraday traders (especially 1–5 minute charts)
Futures, indices, forex, and crypto
Traders who want clear execution zones, not lagging signals
Anyone using liquidity-based or ICT-style frameworks
Key advantages
No signals, no repainting logic — context first
Strict filtering to reduce noise and over-marking
Clean visual layout focused on price delivery
Works seamlessly alongside higher-timeframe bias and volume tools
This indicator does not tell you when to trade —
it shows you where the market is most likely to react.
Important note
KIMATIX Silver Bullet 2.0 is a context and execution tool, not a standalone strategy.
Best results are achieved when combined with proper risk management and directional bias.
More Infos and Premium Indicators: kimatixtrading.com
QM Level Detector by RWBTradeLabQM Level Detector by RWBTradeLab
A clean, non-repainting QM level detector built for traders who track structure shifts and level-break sequences using confirmed candles only.
What this indicator does
This script detects and marks QM Levels based on a strict, rule-based sequence using closed candles only (no running-bar signals).
It identifies two types of QM:
Buy QM
A Buy QM is confirmed when the following sequence completes in order:
* V Level is detected.
* That V Level is broken down by a red candle close below the V Level price.
* After that breakdown, the most recent A Level (formed before the breakdown) is identified.
* When that A Level is later broken out by a green candle close above the A Level price, the original V Level becomes a Buy QM Level .
Sell QM
A Sell QM is confirmed when the opposite sequence completes in order:
* A Level is detected.
* That A Level is broken out by a green candle close above the A Level price.
* After that breakout, the most recent V Level (formed before the breakout) is identified.
* When that V Level is later broken down by a red candle close below the V Level price, the original A Level becomes a Sell QM Level .
Visuals on chart
* A horizontal ray (right-extended) is drawn at the confirmed QM price level.
* Label distance is adjustable via Text Offset (ticks).
Alerts
Built-in alerts trigger only on candle close when a QM is confirmed:
* Buy QM
* Sell QM
Each alert is designed for reliable automation without repainting.
Key settings
* Candle Length (closed candles): Scans the last N closed bars (running candle excluded).
* Buy QM / Sell QM toggles: Show or hide each type.
* Text toggle: Show or hide labels.
* QM Line Color and Text Offset (ticks) customization.
Non-repainting confirmation
All detection, marking, and alerts are based on confirmed candles only.
No running-bar conditions → no repainting .
Disclaimer
This indicator is a level-detection tool, not financial advice. Trading involves risk—always use proper risk management and confirm signals with your own analysis.
Creator: RWBTradeLab
If you find this useful, please leave a like ⭐ and share your feedback.
Asian Sweep Strat by MindEdgeThe idea with the indicator is to highlight the asian range, so when price goes below or above it during frankfurt and london open overlap, we can trade price to the opposite direction
[Sebo] HTF FVGHigher-timeframe Fair Value Gaps only. Fixed logic, no filters, no signals. Built strictly for objective HTF market structure
This script is invite-only. If you want access, please send me a private message!!!
GIX-treid1AUTO: parametrii sunt ajustați automat în funcție de stilul ales (Dynamic / Balanced / Safe).
MANUAL: control complet asupra lungimilor, netezirii, filtrului de trend fals și ieșirilor.
Detecția trendului
Folosește un filtru de Fake Trend Detector pentru a evita semnalele în zone laterale.
Identifică nivelurile cheie de highest trend și lowest trend.
Momentum & Breakout
Calculează un momentum normalizat (bazat pe deviație standard).
La schimbarea direcției momentumului, definește niveluri de breakout
AUTO: Parameters are automatically adjusted based on the selected trading style (Dynamic / Balanced / Safe).
MANUAL: Full control over lengths, smoothing, fake trend filter, and exit settings.
Trend Detection
Uses a Fake Trend Detector filter to avoid signals in sideways market conditions.
Identifies key highest trend and lowest trend levels.
Momentum & Breakout
Calculates a normalized momentum (based on standard deviation).
When momentum direction changes, it defines breakout levels.
InspireHER TraderGal RB Matrix Chart, 5m, 15m, 1hr, 4hr🌸 InspireHER TraderGal RB Matrix
Rejection Block Zones — Chart TF + HTF (5m · 15m · 1H · 4H)
📌 Overview
The InspireHER TraderGal RB Matrix is a multi-timeframe Rejection Block (RB) visualization tool designed to highlight institutional rejection zones across:
Current chart timeframe
Higher timeframes: 5m, 15m, 1H, and 4H
RBs are drawn using confirmed pivot logic, projected forward in time, and automatically maintained to avoid duplication, clutter, or repainting.
This indicator is visual-only and does not place trades.
🧱 What Is a Rejection Block (RB)?
A Rejection Block represents a price area where the market strongly rejected higher or lower prices, often leaving:
Long wicks
Sharp reversals
Institutional footprints
RBs are useful for:
Reaction zones
Mean-reversion areas
Entry refinement
Risk placement
Confluence with structure, VWAP, or liquidity
🎛️ RB Range Modes (Key Feature)
You can control how much of the candle is included in the RB zone.
🔘 RB Range Mode Options
Mode Description Use Case
Wick Only Wick → body edge Clean rejection focus
Wick + Body Wick → full candle body Institutional confirmation
Wick to Wick Full candle range (high → low) Volatility / liquidity sweeps
This setting affects both Chart TF and HTF RBs consistently.
⏱️ Timeframe Controls
Chart Timeframe RBs
Uses the current chart timeframe
Automatically adapts visually when switching charts
No duplicate drawing when Chart TF overlaps HTF
Higher Timeframe RBs
You can independently toggle:
5m RBs
15m RBs
1H RBs
4H RBs
Each timeframe uses:
Its own color
Its own transparency
Its own deduplication logic
🎨 Visual Behavior (Important)
RBs are drawn as boxes projected forward
Optional 50% midline (equilibrium of the zone)
Optional labels showing:
RB
Timeframe
Bullish / Bearish direction
Transparency Logic
When viewing a chart:
Chart TF RBs automatically match the active timeframe’s transparency
Prevents darker zones when Chart TF = HTF
Ensures visual consistency across all modes
🔄 Auto-Maintenance Logic
RBs are automatically managed:
❌ Deleted after price invalidates the zone
🧹 Removed after a configurable number of days
🔢 Hard-capped to prevent performance issues
🚫 No duplicate zones from the same pivot
⚙️ Inputs Summary
Rejection Block Engine
Swing lookback length
Right-side extension
Auto-delete days
Maximum active zones
RB range mode
Styling
Colors per timeframe
Midline toggle
Label toggle
Timeframe Toggles
Chart TF
5m / 15m / 1H / 4H
🧠 Best Practices
This indicator works best when combined with:
Market structure
VWAP
Liquidity highs/lows
Session context
HTF bias
RBs are areas of interest, not trade signals by themselves.
⚠️ Notes & Limitations
Uses confirmed pivots only (no repainting)
HTF RBs are projected using request.security
Zones update dynamically as price evolves
Designed for clarity, not signal spam
🌷 TraderGal Philosophy
“Let price tell you where it was rejected — then let structure tell you what to do.”
This tool is built to support calm, structured, and intentional trading, not over-trading.
Premarket ZonesThis indicator is built for index futures traders (ES, NQ, RTY, YM) who trade liquidity, session structure, and high-probability reaction levels using true CME futures timing.
It automatically plots:
Premarket High & Low zones (wick + body)
Previous Day Futures RTH High & Low zones (PDH / PDL)
Clean right-edge labels
First-touch alerts (once per day)
All calculations are based on Central Time (CT) and CME futures sessions, not equity cash-market hours.
🕒 Session Definitions (CME / Central Time)
Session Time (CT) Purpose
Premarket 03:00 – 08:30 Overnight liquidity build
Futures RTH (Calc) 08:30 – 15:00 True CME regular trading hours
Plot Window 03:00 – 16:00 Visual extension of zones
This script intentionally uses 08:30 CT as the futures open — not 09:30 equity cash open.
🔷 Premarket Zones (PMH / PML)
The indicator builds two premarket zones using multi-timeframe precision.
How they are calculated:
1-minute candles → capture the true wick extremes
5-minute candles → capture the dominant body area
Zones:
Premarket High Zone (PMH)
Between the highest 5-minute candle body and the highest 1-minute wick
Premarket Low Zone (PML)
Between the lowest 1-minute wick and the lowest 5-minute candle body
Key behavior:
Zones finalize at 08:30 CT
Once finalized, zones are drawn as boxes that extend left to 03:00 CT
Zones extend forward through the trading day for context
PMH / PML labels are plotted on the right edge
These zones represent overnight liquidity pools commonly used for:
Opening drive continuation
Liquidity sweeps
Mean reversion
Acceptance vs rejection at the open
🔶 Previous Day High / Low (PDH / PDL)
This script plots TRUE futures PDH / PDL, not equity-based levels.
How they are calculated:
Uses only the prior day’s futures RTH (08:30–15:00 CT)
1-minute candles → wick extremes
5-minute candles → body value areas
Zones:
PDH Zone: 5m body → 1m wick
PDL Zone: 1m wick → 5m body
These levels represent:
Institutional reference points
Prior session balance extremes
High-probability reaction zones
Clean PDH / PDL labels are plotted on the right edge.
🔔 Alerts (Once Per Day)
The indicator includes first-touch alerts for:
PDH
PDL
Premarket High Zone
Premarket Low Zone
Each alert triggers only once per session, making it ideal for:
Trade planning
Discipline-based execution
Prop firm risk control
📈 How Traders Use This Script
This indicator is context-based, not predictive.
Common use cases:
Waiting for liquidity sweeps into PMH / PML
Trading rejection or acceptance at PDH / PDL
Combining with:
VWAP
Opening Range
Market structure
Volume or delta tools
It works especially well on:
Opening range days
Mean-reversion conditions
Trend continuation days after overnight imbalance
🎯 Design Philosophy
Futures-first logic
No clutter
No repainting
No equity-market assumptions
Levels professionals actually use
This script is designed to mirror how professional futures traders map their charts.
⚠️ Notes
Best used on 1m or 5m charts
Designed for CME index futures
Not a standalone trading system
Always manage risk
[Sebo] FVGFixed simple Fair Value Gaps based on a single, objective definition.
This indicator displays all FVGs without optimization or sensitivity settings.
No filtering, no curve-fitting, no interpretation.
Same rules → same chart → objective market context.
HTF Candle BoxFor HTF pattern in real time LTF view.
Used for AMD pattern, to always keep eye on the progress of HTF, but with stay in the LTF.
It will improve your confirmations.
NEURAL FLOW | The AI-Powered Regime Classifier [by @Ash_TheTrade📉 Stop Trading Blindly. Filter the Noise with AI.
Why do your favorite strategies work perfectly one week and bleed your account the next?
The answer is simple: Context.
A Moving Average crossover works in a trend but gets slaughtered in chop. RSI works in a range but fails in a strong breakout. Most indicators are "dumb"—they apply the same math regardless of the market's current reality.
I created Neural Flow to fix this.
Developed by @Ash_TheTrader, this isn't just another buy/sell arrow indicator. It is a sophisticated market Regime Classifier built on concepts derived from machine learning (Lorentzian Distance algorithms).
It doesn't just tell you where price is; it tells you what the market is doing.
🧠 The Concept: How It Works
The core idea behind this script is simple yet powerful: Don't trade unless the environment is right.
The Neural Flow algorithm acts like a veteran trader watching over your shoulder. It analyzes multiple "neurons" (data points representing momentum, volatility, and cyclicality) and compares the current price action to historical data.
By identifying what "state" the market is currently in, it paints your chart in real-time, acting as the ultimate filter for any strategy you use.
👁️ The 4 Market Regimes
The indicator instantly classifies the market into one of four distinct states, visualizing them with a full-chart background glow and candle painting:
1. 🐂 Bull Trend (Neon Green)
The market has clear upward momentum, healthy RSI, and strong trend orientation.
Action: Look for Long entries. Buy dips.
2. 🐻 Bear Trend (Neon Red)
The market has clear downward momentum and weak underlying metrics.
Action: Look for Short entries. Sell rallies.
3. 🚫 CHOP (Grey/Monochrome)
This is the most important feature. The AI has detected low volatility squeeze conditions or directionless ADX. This is where 80% of traders lose money due to fake-outs and whipsaws.
Action: DO NOT TRADE. Sit on your hands and preserve capital.
4. ⚡ Breakout Detected (Gold/Yellow)
The algorithm has detected a sudden, violent expansion in volatility (Bollinger Width explosion) following a period of chop. The direction is not yet confirmed, but a big move is imminent.
Action: Get ready. Watch for a transition into a Bull or Bear regime.
💻 The Glassmorphism Dashboard & AI Confidence
In the corner of your chart, you will find a futuristic, transparent "Glass UI" dashboard designed by @Ash_TheTrader.
It provides instant situational awareness without cluttering your view.
The AI Confidence Score:
This is your conviction meter. It calculates how aligned the various "neurons" of the algorithm are (ranging from 0% to 100%).
A Bull Trend with 40% Confidence might be weak and prone to reversal.
A Bull Trend with 85%+ Confidence indicates strong confluence across multiple data points.
Pro Tip from @Ash_TheTrader: Only take trades when the AI Confidence is above 75%.
🚀 How to Use This in Your Trading
This tool is designed to be versatile.
As a Strategy Filter (Recommended): Use your existing favorite strategy (e.g., MACD, SMC, Price Action). Before taking a trade, glance at the Neural Flow background.
Your strategy says Buy, but the background is Grey (Chop)? Skip the trade.
Your strategy says Sell, and the background is Red (Bear)? Take the trade with confidence.
As a Standalone System: Wait for the market to transition out of "Grey Chop" into a "Green Bull" or "Red Bear" regime. Confirm that the "AI Confidence" on the dashboard is high (>70%), and enter in the direction of the new trend.
⚙️ Settings & Customization
While the default settings are tuned for most markets, @Ash_TheTrader believes in flexibility:
Training Window: Adjust the sensitivity of the regime detection.
Visuals: Customize all colors to match your chart aesthetic.
Glass Dashboard: Move it, resize it, or turn it off completely.
Baseline EMA: Toggle the 50-period baseline reference line on or off to keep your charts ultra-clean.
A Note from the Author:
"Trading isn't about catching every move; it's about catching the right moves and staying safe during the noise. I built this tool to help me instantly recognize when to step on the gas and when to hit the brakes. I hope it brings clarity to your charts."
— @Ash_TheTrader
Disclaimer: This tool is for informational purposes only and does not constitute financial advice. Always manage your risk.
DMcTrades Trading EngineDMcTrades Trading Engine
Multi-Layer Trend, Structure & Momentum Analysis
This indicator is a comprehensive, rule-based trading framework designed to identify high-quality buy and sell opportunities through multi-timeframe confluence, trend alignment, and price-action confirmation. It combines structure breaks, moving-average alignment, volatility filters, and momentum confirmation into a single, unified visual system.
The script is intended for intraday and short-term swing trading, with particular effectiveness on lower timeframes when higher-timeframe trend alignment is respected.
Core Architecture
The indicator is divided into two independent but complementary engines:
1) Multi-Timeframe Structure & Trend Engine
This engine focuses on directional bias and structural validation.
Key components:
Multi-timeframe EMA alignment (fast and slow timeframes)
Supertrend direction agreement across timeframes
Swing-based Break of Structure (BOS) detection
Configurable trend strictness (Conservative / Balanced / Aggressive)
Optional wick-based or close-based structure confirmation
Signals generated here establish trend-qualified entry permission, not standalone entries.
2) Momentum & Breakout Signal Engine
This engine evaluates entry quality and follow-through probability.
Key components:
Breakout and breakdown detection from recent swing levels
ATR-adjusted volatility and impulse candle filtering
MACD and RSI momentum confirmation
VWAP and higher-timeframe EMA confluence (optional)
Retest-based and impulse-based entry logic
Overextension protection to avoid late entries
Signals are classified as:
CONFIRMED (strong multi-filter confluence)
BASE (core conditions met, fewer filters passed)
Signal Types & Visuals
The indicator provides multiple visual layers:
BUY / SELL triangles for core entries
CONFIRMED BUY / SELL labels for high-confluence setups
Classification boxes highlighting active signal zones
Supertrend overlays (current timeframe + optional 5-minute overlay)
EMA stack visualization (9 / 21 / 50 / 200)
Impulse candle highlighting
Optional reversal warning triangles based on momentum divergence
All visuals are fully configurable and can be enabled or disabled independently.
Risk & Trade Context Features
To help filter lower-probability trades, the suite includes:
Minimum ATR and volume thresholds
Trend stability checks (avoids fresh flips unless momentum is strong)
EMA slope and distance validation
Liquidity sweep and recent structure awareness
Optional higher-timeframe trend agreement
These filters are designed to reduce over-trading and improve signal quality during ranging or low-volatility conditions.
Recommended Usage
Best suited for 1-minute to 15-minute charts
Designed for trend-following and momentum continuation
Works across Forex, indices, commodities, and crypto
Use in conjunction with proper risk management and session awareness
This indicator does not provide take-profit or stop-loss levels and should be used as a decision-support tool, not an automated trading system.
Disclaimer
This script is provided for educational and analytical purposes only.
It does not constitute financial advice. Trading involves risk, and past performance does not guarantee future results.
SnR Key Level Detector by RWBTradeLabSnR Key Level Detector by RWBTradeLab
A clean, non-repainting key level detector built for price action traders who want clear, fixed Support/Resistance reference levels with breakout upgrades and alerts.
What this indicator does
This script automatically detects and draws 6 types of SnR key levels using CLOSED candles only (no running-candle logic):
1. Base Key Levels (from 2-candle sequences)
* A Level: Green → Red (Level = 1st Green candle Close)
* V Level: Red → Green (Level = 1st Red candle Close)
* Bullish Gap Level: Green → Green (Level = 1st Green candle Close)
* Bearish Gap Level: Red → Red (Level = 1st Red candle Close)
2. Breakout Upgrade Levels
* RBS (Resistance → Support): When a Green candle CLOSE breaks above an A Level or Bearish Gap Level
* SBR (Support → Resistance): When a Red candle CLOSE breaks below a V Level or Bullish Gap Level
Visuals on chart
* Each detected level is drawn as a horizontal Ray extended to the right.
* Optional text labels are placed above/below the level based on the level type.
* Adjustable “Label Offset (ticks)” to keep labels cleaner on the chart.
Alerts (bar-close only)
Built-in alerts trigger only when a candle is CONFIRMED:
* A Level
* V Level
* Bullish Gap
* Bearish Gap
* SBR
* RBS
Each alert includes price and time in the message.
Key settings
* Candle Length (closed candles): Scans last N closed candles (running candle excluded).
* On/Off toggles: Enable/disable each level type and text labels individually.
* Label Offset (ticks): Controls the label distance from the level line.
Non-repainting confirmation
All levels and alerts are calculated on confirmed bars only.
No repainting, no running-bar signals.
Best use
Works on any market and timeframe. For higher reliability, combine with:
* Higher timeframe structure
* Supply & Demand zones
* Trend context and liquidity sweeps
Disclaimer:
This indicator is a level-detection tool, not financial advice. Trading involves risk; always use proper risk management and confirm levels with your own analysis.
Creator: RWBTradeLab
If you find this useful, please leave a like ⭐ and share your feedback.
TJR Bogdan Pro (V23) - The Sniper Protocol
Stop Chasing. Start Sniping.
The TJR Bogdan Pro is a comprehensive "Smart Money Concepts" (SMC) execution tool designed to filter out market noise and identify high-probability reversal setups. It automates the professional "Sniper" workflow: Identifying Liquidity Sweeps (Traps), confirming Market Structure Shifts (Turns), and highlighting dynamic Fair Value Gap entries (Kill Zones).
This script is engineered to prevent premature entries by enforcing a strict validation sequence. It does not repaint and utilizes a custom "Auto-Extension" logic to keep entry zones active until price interaction occurs.
🧠 Underlying Methodology (How It Works)
This script operates on a proprietary 3-stage algorithm:
1. Multi-Timeframe Liquidity Parsing: Unlike standard pivot indicators, this script programmatically fetches and locks key swing points from the Daily, 4-Hour, and 1-Hour timeframes. It monitors price action in real-time to detect "Sweeps"—specific instances where price pierces a key level to trigger stop-losses but closes back within the range.
2. Volatility-Adjusted Displacement: Standard "Change of Character" (CHoCH) indicators often give false signals during low volume. This script utilizes an ATR-based Displacement Filter. A Market Structure Shift is only confirmed if the breakout candle exceeds a specific volatility threshold (x times the ATR), ensuring that only "Smart Money" reversals are flagged.
3. Dynamic State-Machine Entry Zones: Most FVG indicators draw static boxes that clutter the chart. This script uses a state-machine logic to generate "Living Traps."
* Creation: When a setup is confirmed, a "Kill Zone" box is drawn.
* Extension: This box automatically extends to the right on every new bar, waiting for price to return.
* Interaction: The moment price enters the zone (to trigger your limit order) or invalidates it, the box automatically deletes or locks. This keeps your chart clean and focused only on active opportunities.
🚦 How to Trade (The Protocol)
1. WAIT for the Signal Do not trade based on the small "X" or "Triangle" icons alone. Wait for the large text label to appear:
* 🔵 "BUY SETUP (STRONG)": Confirms a Bullish Reversal (Sweep + CHoCH + Displacement).
* 🟠 "SELL SETUP (STRONG)": Confirms a Bearish Reversal.
2. IDENTIFY the Kill Zone Once the signal appears, a specific Colored Box will form:
* Dark Blue Box: Valid Buy Zone.
* Dark Orange Box: Valid Sell Zone.
* Note: The box highlights the "Premium/Discount" portion of the gap (the most sensitive area for entries).
3. EXECUTE the Trade
* Entry: Place a Limit Order at the edge of the colored box.
* Stop Loss: Place your stop at the Red "STOP" Label (The high/low of the sweep).
* Take Profit: Aim for the Green "TARGET" Label. The script automatically calculates the next opposing liquidity pool (e.g., selling from the 4H High down to the Previous Daily Low).
⚙️ Custom Features
* Scaling Safe: Includes custom plotting logic to prevent the "flattened candle" issue common on high-value indices (like NQ/ES) when plotting price targets.
* Ghost Mode: Entry boxes use transparency settings to remain visible without obscuring candle action.
* System Monitor: A "System Active" status indicator ensures the script logic is running correctly in real-time.
Follow me for updates. I am actively developing this tool with new features, logic improvements, and optimization patches.
UFC** UFC Multi-Trend Signal Indicator**
This indicator is designed to identify trend directions and generate trading signals. It utilizes multiple logic layers to filter market noise and presents clear visual cues for potential entry and exit points.
**Key Features:**
- **Multi-Timeframe Trend Analysis:** Visualizes market structure through composite logic.
- **Clear Trading Signals:** Generates specific chart markers for potential trade opportunities.
- **Built-in Alerts:** Supports TradingView alerts for timely notifications.
**Access:** This is a private, invitation-only script. Click the "Request Access" button and I will approve it shortly.
---
** UFC 多空趋势信号指标**
本指标专为识别趋势方向与交易信号而设计。它通过多层逻辑过滤市场噪音，并为潜在的交易点提供清晰的视觉提示。
**核心功能：**
* **多重趋势分析**：通过复合逻辑直观展示市场结构。
* **清晰的交易信号**：在图表上生成特定的标记，提示潜在的交易机会。
* **内置警报功能**：支持TradingView警报，便于及时接收通知。
**访问方式（重要）：**
1. **点击“请求访问”**：在指标页面点击“请求访问”按钮，提交您的申请。
2. **自动授权**：通常情况下，我会在24小时内批准您的访问请求。
3. **授权后**：您即可在图表上添加并使用本指标。
**使用条款：**
* 本指标为“仅限邀请”的私有脚本，**无法公开搜索**。
* 授权后仅供您个人在TradingView平台内使用。
* 欢迎提供使用反馈，但请勿复制、共享代码或重新发布。
感谢您的关注！
UFC** UFC Multi-Trend Signal Indicator**
This indicator is designed to identify trend directions and generate trading signals. It utilizes multiple logic layers to filter market noise and presents clear visual cues for potential entry and exit points.
**Key Features:**
- **Multi-Timeframe Trend Analysis:** Visualizes market structure through composite logic.
- **Clear Trading Signals:** Generates specific chart markers for potential trade opportunities.
- **Built-in Alerts:** Supports TradingView alerts for timely notifications.
**Access:** This is a private, invitation-only script. Click the "Request Access" button and I will approve it shortly.
---
** UFC 多空趋势信号指标**
本指标专为识别趋势方向与交易信号而设计。它通过多层逻辑过滤市场噪音，并为潜在的交易点提供清晰的视觉提示。
**核心功能：**
* **多重趋势分析**：通过复合逻辑直观展示市场结构。
* **清晰的交易信号**：在图表上生成特定的标记，提示潜在的交易机会。
* **内置警报功能**：支持TradingView警报，便于及时接收通知。
**访问方式（重要）：**
1. **点击“请求访问”**：在指标页面点击“请求访问”按钮，提交您的申请。
2. **自动授权**：通常情况下，我会在24小时内批准您的访问请求。
3. **授权后**：您即可在图表上添加并使用本指标。
**使用条款：**
* 本指标为“仅限邀请”的私有脚本，**无法公开搜索**。
* 授权后仅供您个人在TradingView平台内使用。
* 欢迎提供使用反馈，但请勿复制、共享代码或重新发布。
感谢您的关注！
Pink Trend Candle Title:
AA1 Light Green Breakout Candle — Momentum-Based Buy Signal
Short Title:
AA1GreenCandle
Tags:
breakout, momentum, volatility, atr, volume, trend, signal, entry, candle-pattern
Short Description:
A momentum-based breakout candle indicator with volatility and volume confirmation.
Full Description:
The AA1 Light Green Breakout Candle indicator is designed to identify strong bullish breakout moments by combining volatility expansion, price structure, and volume confirmation.
It highlights situations where price transitions from consolidation into momentum-driven upward movement.
The indicator visually marks qualifying candles with a light green color and plots a small confirmation dot below the bar to clearly signal potential buy opportunities.
How It Works
The script analyzes price behavior using volatility-adjusted levels and recent market structure to detect breakout conditions.
A signal is generated when price decisively moves above a dynamic reference level while confirming momentum strength and participation.
Additional filters ensure signal quality by validating:
Directional price expansion
Relative volume increase
Active candle behavior
When all conditions align, the breakout candle is highlighted and marked on the chart.
Key Features
Momentum-based bullish breakout detection
Volatility-adjusted reference levels
Optional volume filter to enhance signal reliability
Clean visual cues: light green candle + dot below the bar
Built-in alert for real-time notifications
Compatible with all markets and timeframes
Non-repainting logic (signals confirm after candle close)
Use Cases
Identifying early breakout entries
Capturing momentum continuation moves
Filtering buy setups in trending markets
Supporting intraday and swing trading strategies
Confluence tool with trend or structure indicators
Notes
Signals represent potential breakout opportunities, not guaranteed outcomes.
Best used alongside risk management and trend confirmation tools.
Volume filter can be disabled for markets with unreliable volume data.
Disclaimer
This script is for educational and analytical purposes only and does not constitute financial advice.
Trading involves risk; always confirm signals before executing trades.
Developer
Developed by Abdulrahman Alotaibi — Scripts
