ابدأ الآن

دورات

Sessions Moving Fib + ES SMT Divergence This indicator automatically tracks the high and low of the Asia, London, and New York trading sessions and draws a dynamic (moving) Fibonacci range for each session. The Fibonacci levels update in real time as the session develops and then extend forward once the session ends, giving clear intraday reaction zones. In addition, the indicator detects SMT-style divergences on ES (S&P 500 futures) by comparing price structure against another correlated market (default NQ). This helps identify institutional divergence, where one market makes a higher high or lower low while the other fails — often signaling potential reversals or continuation traps. This tool is designed for intraday futures traders, especially those trading ICT / SMT concepts, session-based liquidity, and market structure.
مؤشر Pine Script®
من ‎MrBigBadWolf‎
Ingenuity Crazy Strategy Advance CloseThis indicator is designed to keep your trading simple and repeatable. By default, it is optimized for XAUUSD, during Tokyo session, on the 5-minute chart. The indicator automatically marks a tradable range and waits for price to break and confirm a direction. Once the signal appears, it’s as straightforward as buy or sell—no extra analysis or overthinking required. After the first entry is taken, the indicator continues to monitor price. When price reaches a specific pip distance, it will automatically signal a second trade using the same risk, allowing you to scale into momentum without increasing complexity. The goal is to remove hesitation and reduce emotional decision-making, while still giving you structured trade opportunities. This system is not meant to be over-tweaked. The logic is built to give clean entries as long as you’re using the correct session, pair, and settings. 🔧 Default Setup: • Pair: XAUUSD • Session: Tokyo • Timeframe: M5 (5-minute) ⚠️ Important: The default settings are only optimized for XAUUSD. To trade other pairs or timeframes and get the most consistent results, you must use the correct settings.
مؤشر Pine Script®
من ‎rt55095‎
lostsol Markets v5lostsol Markets v5 is a high-precision market architecture tool designed for traders who utilize institutional logic, SMC (Smart Money Concepts), and session-based liquidity strategies. Version 5 introduces a refined monochrome aesthetic and an expanded suite of "Market Maker Zones" to help you visualize where institutional orders are being engineered. Core Architecture: Global Session Tiers The indicator maps the 24-hour trading cycle into distinct institutional windows. Each session features dynamic range boxes that track real-time highs and lows, providing clear visual targets for liquidity sweeps. New York (US): High-volatility window mapping the Western institutional open. London (UK): The core liquidity session for FX and global equity drivers. Asia: Sets the initial daily bias and overnight liquidity parameters. Session Fibs: Toggleable Fibonacci levels (0.382, 0.5, 0.618) automatically calculated for every session range to find mean reversion points. Market Maker Zones (MM Zones) Version 5 places a heavy focus on the "Gaps" and "Traps" where retail traders often get caught on the wrong side of the trend. Weekend Trap & Trapped Traders: A proprietary calculation that identifies price ranges where orders are locked over the weekend. It visualizes the "Trapped Traders" zone by comparing the Friday NY close to the weekend price action. Asia Gap & Dump: Identifies the low-liquidity "dead zones" where institutional re-accumulation typically occurs before a London breakout. Reversal Windows: Automated boxes for New York and UK "Mid-Gap" reversals, marking the high-probability time-slots for trend exhaustion. Technical Features Monochrome UI: Designed for professional dark-mode setups using a sophisticated monochrome base palette to reduce eye fatigue. Session Bar HUD: A discrete bottom-bar visualization that shows upcoming and active session times without cluttering the price action. Dynamic Timezone Alignment: Hardcoded for GMT-5 (NY Time) to ensure institutional windows align regardless of your local chart settings. Wave Trend Dashboard (Beta): Optional dashboard toggle for high-level trend confluence. How to Use Liquidity Sweeps: Look for price to exit a session range (e.g., Asia) to "hunt" liquidity before reversing into a Market Maker Reversal Zone. The Trap Logic: If price is trading within the Trapped Traders box at the New York open, expect a high-velocity breakout once that zone is cleared. Range Confluence: Use the 50% (Mean Reversion) Fib line within the London or NY boxes to identify institutional "fair value" during a trending day. Developer Note: This indicator is optimized for intraday timeframes (1m through 1h). For the best experience, ensure your chart is set to a dark theme to take full advantage of the monochrome transparency layers.
مؤشر Pine Script®
من ‎lost_sol_‎
The Fantastic 4 - Momentum Rotation StrategyOverview The Fantastic 4 is a tactical momentum rotation indicator. It rotates capital monthly across four carefully selected assets based on their 75-day Rate of Change (ROC), allocating only to assets with positive momentum and proportionally weighting them by their momentum strength. This indicator tracks the strategy's historical performance, displays current allocation recommendations, and sends monthly rebalance alerts so you can easily manage your portfolio. Simply set your capital amount and the indicator shows exactly how much to invest in each asset. Why These Four Assets? The selection of 20-year Bonds, Gold, Russell 2000, and Emerging Markets is based on their specific volatility and decorrelation characteristics, which allow the strategy to react quickly to market shifts while providing protection during downturns. Russell 2000 (Small Caps) Chosen over the S&P 500 because it is more "lively" and active (Nowadays you could use also the Nasdaq). Its trends are steeper and more vertical, making it easier for a momentum indicator to catch clear trends. While the S&P 500 has more inertia, the Russell 2000 develops faster, allowing the strategy to capture gains in shorter periods. Emerging Markets Included because they can act like a "rocket," offering explosive growth potential while maintaining high decorrelation from developed equity markets. When emerging markets trend, they trend hard. 20-Year Bonds Selected because they are the most decorrelated asset from equities. When a stock market crash occurs, capital typically flows into fixed income, and long-term bonds (20-year) notice this influx the most, making their price reaction more significant and easier to trade. This is the strategy's primary "safe haven." Gold Along with bonds, gold serves as a defensive asset providing a "shield" for the portfolio when general market conditions deteriorate. It offers additional decorrelation and crisis protection. How the Strategy Works The 75-Day Momentum Engine The strategy uses a 75-day momentum lookback (roughly 3.5 months), which is considered very "agile" compared to other models like Global Equity Momentum (GEM) that use 200-day periods. This shorter window allows the strategy to: React quickly to changes in trend Catch upward movements in volatile assets early Exit quickly when trends break Monthly Rebalancing Process At the end of each month: Step 1: Calculate 75-day ROC for each asset Step 2: Filter out assets with negative momentum (they receive 0% allocation) Step 3: Distribute capital proportionally based on momentum strength Step 4: Apply 5% minimum threshold (smaller allocations become zero) Step 5: Apply 80% maximum cap (no single asset exceeds 80%, remainder stays in cash) The 80% Ceiling Rule There is an 80% investment ceiling for any single asset to prevent over-exposure. If only one asset (like bonds) has positive momentum, 80% goes to that asset and 20% remains in cash/liquidity. Behavior in Bearish Markets When markets turn bearish, the strategy protects capital through several mechanisms: Automatic Risk-Off Because the strategy only invests in assets with positive momentum, it automatically moves away from crashing equities. If an asset's trend becomes negative, the strategy stays "on the sidelines" for that asset. The Bond Haven During prolonged bearish periods or sudden crashes (like COVID-19), the strategy typically shifts into 20-year bonds. During the COVID-19 crash in March 2020, while global markets were collapsing, strategies like this reportedly yielded positive returns by being positioned in bonds. Full Liquidity Option If no assets show positive momentum, the strategy moves to 100% cash. This is rare given the decorrelation between the four assets—when equities crash, bonds and gold typically rise. What This Indicator Does This is a tracking and alerting tool that: Calculates the optimal allocation based on current momentum Shows historical monthly performance of the strategy Simulates portfolio equity growth from your specified starting capital Displays exact dollar amounts to invest in each asset Sends monthly rebalance alerts with complete instructions Detects missing data to prevent false signals Features Dynamic allocation table showing weights, dollar amounts, and ROC values Monthly returns history with color-coded performance Data availability detection with visual status indicators Configurable alerts for rebalancing, go-to-cash, and missing data Simulated equity curve from initial capital Settings Guide Assets Configure your four ETFs. The default European ETFs are: Asset 1 - XETR:IS04: iShares 20+ Year Treasury Bond (Bonds) Asset 2 - XETR:GZUR: Gold ETC Asset 3 - XETR:XRS2: Xtrackers Russell 2000 (Small Caps) Asset 4 - XETR:XMME: Xtrackers Emerging Markets (EM) For US markets, consider: TLT (20-year bonds), GLD (Gold), IWM (Russell 2000), EEM (Emerging Markets) Strategy Settings ROC Period - Momentum lookback in daily bars. Default: 75 days (~3.5 months) Max Allocation % - Maximum weight for any single asset. Default: 80% Min Allocation % - Threshold below which allocation becomes zero. Default: 5% Capital Initial Capital - Your portfolio value. The indicator calculates exact amounts for each asset based on this. Default: $20,000 Display Table Positions - Position the allocation and history tables on screen Months of History - How many past months to display (3-24) Alerts Monthly Rebalance Alert - Sends complete allocation details at month end Go-to-Cash Alert - Alerts when all assets have negative momentum Missing Data Alert - Warns when asset data is unavailable How to Use Initial Setup Add indicator to any chart and switch to MONTHLY timeframe Configure your four ETF tickers Set your portfolio capital amount Position the tables where you prefer Setting Up Alerts Click Alert button or press Alt+A Set Condition to "Fanta4" Select "Any alert() function call" Choose notification method (Email, Push, Webhook, etc.) Set expiration to "Open-ended" Monthly Workflow Receive rebalance alert at the start of each month Alert shows exact percentages AND dollar amounts for each asset Adjust your portfolio accordingly No action needed during the month Reading the Tables Green = positive returns/momentum Red = negative returns/momentum Orange "N/A" = missing data Alloc column shows weight distribution (e.g., "45/35/20/—") Alert Message Example Monthly alerts include: Target month for the new allocation Current portfolio value Each asset's percentage AND dollar amount Each asset's momentum (ROC) value Cash allocation if applicable Total return since inception Historical Context This strategy combines elements of: Dual Momentum (Gary Antonacci) - Relative and absolute momentum Global Equity Momentum (GEM) - But with shorter 75-day vs 200-day lookback Risk parity concepts - Decorrelated asset selection The key innovation is the specific asset selection optimized for momentum trading and the agile 75-day lookback period that allows faster reactions to trend changes. Data Requirements The strategy activates only when all four assets have valid price data (minimum 75 days of history). The data status row shows checkmarks for available data. Note: Some ETFs have limited history (e.g., XMME data starts June 2017). Limitations This is a tracking indicator, not an automated trading system Past performance is hypothetical and does not guarantee future results Requires all four assets to have valid data; partial allocation not supported Monthly rebalancing may miss shorter-term momentum shifts Transaction costs, slippage, and taxes are not included in simulation ETF availability and liquidity vary by region The 75-day momentum may whipsaw in choppy, trendless markets Disclaimer This indicator is for educational and informational purposes only. It does not constitute financial advice. Version History v1.0 - Initial release with momentum rotation, allocation tables, data validation, and monthly alerts
مؤشر Pine Script®
من ‎luiscaballero‎
Session Range Boxes(MTF)📦 Indicator Name Session Range Boxes (MTF) Multi-Timeframe Directional Session Range Visualization 📘 Description Session Range Boxes (MTF) is a multi-timeframe market structure tool that visually highlights price range behavior across different time sessions using clean, directional range boxes. Each box represents the High–Low range of a completed or live session, automatically colored based on directional bias: 🟢 Bullish → Session Close > Session Open 🔴 Bearish → Session Close < Session Open ⚪ Neutral → Session Close = Session Open This allows traders to instantly identify trend strength, balance zones, volatility expansion, and key support/resistance areas across multiple timeframes — all on a single chart. 🔍 What This Indicator Shows For every enabled timeframe, the indicator: Draws a range box from session open to session close Continuously updates live session High & Low Locks the final color once the session completes Keeps historical boxes for structure and context Supported timeframes: Quarterly Half-Yearly Yearly Monthly Weekly Daily Hourly 30-Minute 15-Minute 5-Minute ⚙️ Default Behavior By default, the indicator enables: Weekly Daily Hourly This default setup is intentionally chosen to suit most traders and provides: Higher-timeframe structure (Weekly) Swing context (Daily) Intraday execution levels (Hourly) 🧠 How to Use It Effectively 📈 Higher-Timeframe Analysis (Swing / Positional Trading) Recommended combinations: Weekly + Daily Monthly + Weekly Use cases: Identify dominant market bias Spot compression vs expansion Define higher-timeframe support & resistance zones ⚡ Intraday Trading (Day Trading) Recommended combinations: Daily + Hourly Hourly + 30-Minute Use cases: Track intraday range development Identify directional day types Trade breakouts, rejections, or mean-reversion within session ranges 🚀 Scalping & Precision Entries Recommended combinations: Hourly + 15-Minute 30-Minute + 5-Minute Use cases: Fine-tune entries within larger session ranges Align lower-timeframe trades with higher-timeframe bias Spot micro range expansion and contraction 🎨 Customization Options Bullish / Bearish / Neutral colors Box fill transparency Border transparency & color Maximum historical boxes per timeframe This allows you to keep charts clean, lightweight, and performance-friendly. 💡 Best Practices Avoid enabling too many timeframes at once — clarity beats clutter Use higher-timeframe boxes for bias, lower-timeframe boxes for entries Combine with: Market structure Volume VWAP Liquidity concepts Price action confirmation Session Range Boxes (MTF) is a clean, powerful visual tool designed to help traders: Understand session-based price behavior Align trades across timeframes Improve structure awareness without clutter Whether you are a scalper, day trader, or swing trader, this indicator adapts seamlessly to your workflow.
مؤشر Pine Script®
من ‎jochacko11‎
1
TSLA Cycle Timing - 122-Day Reversal Map (Adaptive Framework)This indicator is a timing map built specifically for Tesla (TSLA) on the Daily chart. It plots a repeating set of vertical, color-coded timing markers inside a 122-bar cycle (commonly treated as ~122 trading days on the Daily timeframe). These markers highlight reversal “zones”—areas where TSLA has historically shown a tendency to pivot from high-to-low and low-to-high within the cycle. The script includes: 23 TSLA-derived set points (Points 1–23): the core timing map used to mark the most repeatable reversal areas. Two optional “Inversion Points” (INV A / INV B): manual markers you can enable when TSLA’s high/low sequence appears to flip due to a structural deviation. One additional optional marker (OPT C) for user customization. This is not an auto-buy/sell system. It is a cycle-structure framework designed to help you anticipate when a reversal is more likely to occur, so you can combine it with your own confirmation tools (price action, trend context, support/resistance, volume, etc.). Definitions (How this script interprets highs/lows) In the context of cycle mapping: A High Point is the highest price reached between two neighboring high pivots. A Low Point is the lowest price reached between two neighboring low pivots. The vertical lines are timing markers, not “guaranteed pivot candles.” Price may top/bottom slightly before or after a line. That’s why the script includes an optional ± window (in bars) to visualize a small tolerance zone around each marker. How it works (Conceptually) The script defines a repeating cycle length (default 122 bars). Inside each cycle, each point has an offset measured in bars from the cycle start. For every cycle instance (past, current, and optional future cycles), the script draws: a vertical dotted line at each enabled point offset optional ± window bands around the line optional labels (numbers for set points and “INV” labels for inversion points) Because this is a Tesla-specific map, the default offsets for Points 1–23 are preconfigured based on TSLA’s observed structure, and the remaining optional points are user-controlled. How to Use (Important) 1) Use the Daily chart first This model is designed around TSLA’s Daily cycle behavior. Start with: Symbol: TSLA Timeframe: 1D If you use other timeframes, the cycle “tempo” can change and may require different offsets. 2) Identify the cycle start (anchor) Cycle mapping depends on where the current cycle is anchored. Use “Bars Back to Current Cycle Start” to shift the cycle start so that the script’s point sequence aligns with your most recent known cycle beginning. Once aligned, the points should repeat near each 122-bar interval. 3) Read the vertical markers as reversal zones The colored vertical lines represent areas where reversals have historically occurred, not a promise that price must reverse exactly on the line. A practical approach: Use the marker as a “heads-up” zone Wait for confirmation (trend break, candle structure, momentum shift, key level reaction, etc.) 4) Understand “set points” vs “Inversion Points” Set Points (1–23) These are the primary TSLA reversal zones that tend to recur within the 122-bar structure. Specific numbered points often appear near the same relative position inside each cycle. Inversion Points (INV A / INV B) Occasionally, TSLA’s cycle behavior can flip—meaning the expected high-to-low (or low-to-high) progression temporarily swaps order. This is what I refer to as an inversion. When you see a cycle behaving “backwards” relative to the usual sequence: Enable INV A and/or INV B Place their offsets at the bar locations where the flip becomes obvious Use these markers as manual annotations so your cycle notes stay consistent even when TSLA deviates from its typical rhythm These inversion markers do not force the script to predict a flip—they allow you to document it cleanly. 5) Use the ± Window Bands to manage real-world variance Markets don’t pivot on perfect timestamps. If a reversal tends to happen “around” a point: Enable ± Window Bands Set Window ± Bars (commonly 1–3 bars on 1D) This gives a realistic visual tolerance zone around each timing marker. Settings Guide (Practical) Cycle Length (bars): 122 (TSLA Daily baseline) Lookback Bars: increase to study more history, decrease for performance Future Cycles: use sparingly; future markers are guidance zones, not guarantees Past Cycles: Lines Only: recommended ON for stable performance Labels at Top: helps keep the chart clean and readable Final Notes / Limitations This is a historical timing framework designed to map TSLA’s repeating reversal structure. It helps estimate when reversal pressure tends to appear, but it does not replace risk management or confirmation. Cycle behavior can stretch, compress, or invert during unusual volatility regimes—hence the inclusion of optional inversion markers.
مؤشر Pine Script®
من ‎Dinjin‎
Bharat Jhunjhunwala - Distribution Day TrackerOverview The Distribution Day Tracker is a technical analysis tool designed to automate the identification and tracking of institutional selling pressure, specifically for major market indices (e.g., Nifty 50, S&P 500). While the concept of "Distribution Days" is a cornerstone of CAN SLIM methodology, this script provides a unique, automated lifecycle management system for these signals, ensuring traders act on current data rather than expired warnings. How It Works (Technical Logic) This script does not just flag a price drop; it uses a multi-step conditional logic to maintain a "living count" of market weakness: Detection Engine: A Distribution Day is triggered only when two conditions are met simultaneously: The index closes at least 0.2% lower (configurable) than the previous session. The volume is strictly higher than the previous session's volume. Lifecycle Management (Originality): Unlike basic scanners, this script manages the "expiration" of signals automatically using two proprietary rules: Time Decay: Signals are automatically removed from the count after 25 trading sessions (approx. one calendar month). Price Negation: If the index rallies 5% above the specific close price of a distribution day, that specific day is invalidated and removed from the count. Data Persistence: The script utilizes Pine Script® Arrays (array.new_int(), array.new_float()) to store and track the bar index and price of every valid distribution day in the lookback period, ensuring the count is accurate even as old days expire. Key Features & Originality Dynamic Dashboard: A real-time table that translates the raw count into actionable market statuses (e.g., "Healthy Uptrend" vs. "Trim Positions") based on institutional accumulation/distribution clusters. Rally Negation Levels: The script identifies and displays the specific price level required to "negate" the nearest distribution day, providing a clear target for trend reversal. Zero Repainting: All calculations are performed on closed bars. The 'D' labels and dashboard counts are final and do not shift after the bar closes. How to Use Monitor the Count: 0-3 Days: Market is in a confirmed uptrend. 4-5 Days: Exercise caution; institutional selling is increasing. 6+ Days: High probability of a market top or significant correction. Adjusting for Volatility: Use the "Percent Loss Threshold" input to adapt the script for different assets. While 0.2% is standard for indices, 0.5% or 1.0% may be more appropriate for individual volatile stocks. Visual Cues: Look for the "D" markers above price bars to identify exactly where the institutional selling occurred.
مؤشر Pine Script®
من ‎BharatJhunjhunwala‎
MagicDust UwUDynamic Lunar Marker Placement (based on sphere-specific reaction): Precious Metals: NM below bar (bullish), FM above bar (bearish) Stocks/Indices: NM below bar (bullish), FM above bar (bearish) Crypto: INVERTED - NM above bar (bearish), FM below bar (bullish) Agriculture: NM below bar (bullish), FM above bar (bearish) Energy: NM below bar (bullish), FM above bar (bearish) Industrial Metals: Both above bar (neutral - economic data dominant) Forex: Both above bar (neutral - low lunar sensitivity) Bonds: Both above bar (neutral - minimal lunar effect) NM = NEW MOON / FM = FULL MOON
مؤشر Pine Script®
من ‎StrangeAwoman‎
Liquidity TrailsLiquidity Trails A Volatility-Anchored Market Expectation & Risk Mapping Tool Have you ever been stopped out by normal market noise? Have you noticed price reacting around “invisible boundaries” that aren’t obvious on a naked chart? Liquidity Trails was designed to address exactly that problem — by mapping statistical daily price expectations using fixed higher-timeframe volatility data. This indicator does not predict direction. Instead, it helps traders understand where price is statistically expected to travel within a given session or period, allowing for more informed risk placement and expectation management. 📌 Core Features 1️⃣ Fixed Timeframe Volatility Anchoring All calculations are derived from a user-selected anchor timeframe (Daily, Weekly, Monthly, or custom), ensuring that levels remain stable and unchanged when switching chart timeframes. This prevents intraday recalculation noise and keeps reference levels consistent throughout the anchor period. 2️⃣ Average Daily Range (ADR) Projection The indicator calculates ADR based on historical price ranges and projects: Estimated upper expansion level Estimated lower expansion level These levels represent statistical price boundaries, not support or resistance claims. 3️⃣ ATR Context Levels Average True Range (ATR) bands are plotted from the same anchor timeframe to provide context for volatility expansion vs contraction. This allows traders to visually assess whether price is operating within, near, or beyond typical volatility conditions. 4️⃣ Volatility-Adjusted Stop Reference Levels Optional stop reference levels are plotted at a configurable percentage of ADR (default: 60%), helping traders evaluate whether their risk placement is: Too tight (high noise exposure) Too wide (reduced reward efficiency) Statistically aligned with market behavior 5️⃣ Timeframe-Independent Visualization Levels are drawn using step-style plots, ensuring they: Remain flat for the entire anchor period Update only when a new anchor candle begins Do not repaint intraday 🧠 How This Indicator Is Best Used Liquidity Trails is intended as a context and risk framework, not an entry signal. It complements: Structure-based trading Liquidity sweep models Mean-reversion or expansion strategies Discretionary and systematic approaches Use price action, structure, or your existing strategy for entries — use this tool to define expectations and manage risk. 💡 Suitable For Intraday traders seeking stable daily reference levels Swing traders anchoring weekly or monthly volatility Traders who want objective volatility context without clutter 🔔 Disclaimer This indicator is a visual analytical tool only. It does not provide trade signals or financial advice. All trading decisions and risk management remain the responsibility of the user.
مؤشر Pine Script®
من ‎ling7777‎
StO Price Action - Luminous Daily RoadmapShort Summary - Luminous Daily Roadmap (LDR) are special trading days - Marks entire trading days using background coloring - Creates a clear daily roadmap directly on the chart - Designed to stay minimal and non-intrusive Full Description Overview - LDR is a proprietary forex trading schedule - Dates of major trend reversals or significant market continuations - Highlights full trading days using background colors - Improves visual structure and day-to-day orientation - Focuses purely on time segmentation, not price signals - Suitable for all markets and timeframes Daily Marking Logic - Each trading day is visually marked across all its bars - Background coloring spans the full session of the day - Works consistently across intraday and higher timeframes Year Look Back (YLB) - YLB defines the starting year for day marking - Markings are only applied from the selected year onward - Allows focused analysis on recent or specific years Visualization - Background color is fully customizable - Uses high transparency to avoid hiding price action Usage - Useful for session-based and daily analysis - Supports routine-based trading and journaling - Enhances visual rhythm of the chart Notes - This indicator is purely visual and non-predictive - No alerts or signals are generated - Best used as a structural overlay for orientation - Can be combined with any price action or indicator-based workflow
مؤشر Pine Script®
من ‎sto_svc‎
ICT Power of 3 identify the high-probability Power of 3 pattern by analyzing price behavior rather than just specific times of day. It focuses on how the market builds, traps, and then expands. 1. Accumulation (The Setup) Logic: The script monitors volatility using the Average True Range (ATR). When volatility drops below its recent average, the script recognizes that orders are being "accumulated." Visual: A Blue Dotted Box appears. This marks the equilibrium zone where buy and sell side liquidity is being engineered above and below the high/low of the range. 2. Manipulation (The Trap) Logic: The script looks for a "Sweep." This is defined as price moving outside the blue accumulation box but failing to sustain that move. In the video, this is the "Judas Swing" or false breakout. Visual: A Red Diamond appears above or below the bar. This signals that the script has detected a liquidity grab—essentially, the market has "tricked" breakout traders into the wrong side of the market. 3. Distribution (The Expansion) Logic: This is identified through Displacement. The script calculates the average candle body size. When a candle appears that is significantly larger (based on your Displacement Multiplier), it confirms that "Smart Money" has entered the market. Visual: A Green Triangle appears. This marks the start of the distribution phase, which is the "meat" of the move where you want to be positioned.
مؤشر Pine Script®
من ‎day_trade_mind‎
Value Area PRO (TPO/Volume Session VAH/VAL/POC) 📌 AP Capital Value Area PRO (TPO / Volume) AP Capital Value Area PRO is a session-based value area indicator designed for Gold (XAUUSD), NASDAQ (NAS100), and other CFD instruments. It focuses on where the market has accepted price during the current session and highlights high-probability interaction zones used by professional traders. Unlike rolling lookback volume profiles, this indicator builds a true session value area and provides actionable signals around VAH, VAL, and POC. 🔹 Core Features Session-Anchored Value Area Value Area is built only during the selected session Resets cleanly at session start Levels develop during the session and can be extended forward No repainting or shifting due to lookback changes TPO or Volume Mode TPO (Time-at-Price) mode – ideal for CFDs and tick-volume data Volume mode – uses broker volume if preferred Same logic, different weighting method Fixed Price Bin Size Uses a fixed bin size (e.g. 0.10 for Gold, 0.25–0.50 for NAS100) Produces cleaner, more realistic VAH/VAL levels Avoids distorted profiles caused by dynamic bin scaling VAH / VAL / POC Levels VAH (Value Area High) VAL (Value Area Low) POC (Point of Control) (optional) Lines can be extended to act as forward reference levels 🔹 Trading Signals & Alerts Value Re-Entry Identifies false breakouts where price: Trades outside value Then closes back inside Often seen before strong mean-reversion or continuation moves. Acceptance Detects initiative activity using: Multiple consecutive closes outside value Filters out weak single-candle breaks Rejection Flags strong rejection candles: Large candle body Wick outside value Close back inside the value area These conditions are especially effective on Gold intraday. 🔹 Optional Profile Histogram Right-side volume/TPO histogram Buy/sell imbalance visualization Fully optional to reduce chart clutter and improve performance 🔹 Best Use Cases Recommended markets XAUUSD (Gold) NAS100 / US100 Other index or metal CFDs Recommended timeframes 5m, 15m, 30m Suggested settings Mode: TPO Value Area: 70% Bin size: Gold: 0.10 NAS100: 0.25 or 0.50 🔹 How Traders Use It Trade rejections at VAH / VAL Look for acceptance to confirm trend days Use re-entries to fade failed breakouts Combine with trend filters, EMA structure, or session context ⚠️ Disclaimer This indicator is provided for educational and analytical purposes only and does not constitute financial advice. Always manage risk appropriately.
مؤشر Pine Script®
من ‎APCapitalTrading‎