KI Power signaleManus Machiene Learning Beast – Indicator Description
Overview
Manus Machiene Learning Beast is an advanced TradingView indicator that combines Machine Learning (Lorentzian Classification) with trend, volatility, and market regime filters to generate high-quality long and short trade signals.
The indicator is designed for rule-based, disciplined trading and works especially well for set-and-forget, semi-automated, or fully automated execution workflows.
⸻
Core Concept
At its core, the indicator uses a machine-learning model based on a modified K-Nearest Neighbors (KNN) approach.
Instead of standard Euclidean distance, it applies Lorentzian distance, which:
• Reduces the impact of outliers
• Accounts for market distortions caused by volatility spikes and major events
• Produces more robust predictions in real market conditions
The model does not attempt to predict exact tops or bottoms.
Instead, it estimates the probable price direction over the next 4 bars.
⸻
Signal Logic
Long Signals
A long signal is generated when:
• The ML model predicts a positive directional bias
• All enabled filters are satisfied
• A new directional change is detected (non-repainting)
• Optional trend filters (EMA / SMA) confirm the direction
• Optional kernel regression confirms bullish momentum
📍 Displayed as a green label below the bar
Short Signals
A short signal is generated when:
• The ML model predicts a negative directional bias
• Filters confirm bearish conditions
• A new directional change occurs
• Trend and kernel filters align
📍 Displayed as a red label above the bar
⸻
Filters & Components
All filters are modular and can be enabled or disabled individually.
1. Volatility Filter
• Avoids trading during extremely low or chaotic volatility conditions
2. Regime Filter (Trend vs Range)
• Attempts to filter out sideways markets
• Especially important for ML-based systems
3. ADX Filter (Optional)
• Trades only when sufficient trend strength is present
4. EMA / SMA Trend Filters
• Classic trend confirmation (e.g., 200 EMA / 200 SMA)
• Ensures trades are aligned with the higher-timeframe trend
5. Kernel Regression (Nadaraya-Watson)
• Smooths price behavior
• Acts as a momentum and trend confirmation filter
• Can be used in standard or smoothed mode
⸻
Moving Average Overlays
For visual market context, the indicator includes optional overlays:
• ✅ SMA 200
• ✅ HMA 200
Both can be toggled via checkboxes and are visual aids only, unless explicitly enabled as filters.
⸻
Exit Logic
Two exit methods are available:
1. Fixed Exit
• Trades close after 4 bars
• Matches the ML model’s training horizon
2. Dynamic Exit
• Uses kernel regression and signal changes
• Designed to let profits run in strong trends
⚠️ Recommended only when no additional trend filters are active.
⸻
Backtesting & Trade Statistics
The indicator includes an on-chart statistics panel showing:
• Win rate
• Total trades
• Win/Loss ratio
• Early signal flips (useful for identifying choppy markets)
⚠️ This is intended for calibration and optimization only, not as a replacement for full strategy backtesting.
⸻
Typical Use Cases
• Swing trading (M15 – H4)
• Rule-based discretionary trading
• Set-and-forget trading
• TradingView alerts → MT4/MT5 → EA execution
• Prop-firm trading (e.g. FTMO), with proper risk management
⸻
Important Disclaimer
This indicator:
• ❌ does not guarantee profits
• ❌ is not a “holy grail”
• ✅ is a decision-support and structure tool
It performs best when:
• Combined with strict risk management (e.g. ATR-based stops)
• Used in trending or expanding markets
• Executed with discipline and consistency
دورات
Relative Strength Table (Spring)This indicator helps traders quickly understand the relative strength of different groups and different stocks.
Custom EST Candle Marker (All Timeframes)marks out custom 4 hour candle to focus on like 2am or 8am whatever you want
AOC Pro - Elite Audited Suite (V6.6)this is one of best indicator for indan market based on option chain volume support and resistance for best result one can follow
GeorgeFutures: ELITE Dashboard & Global Alert (C1,C2,C3)George FX : ELITE Dashboard & Global Alert
This indicator acts as your "Market Compass," providing 1-Hour (HTF) context while you execute trades on the 5-Minute (LTF) timeframe.
1. The "Master Filter" Logic (1H Calculation)
Regardless of the chart you are viewing, the script calculates three layers of data from the 1-hour timeframe in the background:
Primary Trend (EMA 200): Establishes the permitted direction. If the price is above the EMA 200, it only looks for Longs; if below, only Shorts.
Order Flow (FVG): Scans for institutional momentum. When a valid Fair Value Gap (imbalance) appears in the direction of the trend, it confirms market "strength."
Liquidity (Sweep c1, c2, c3): Identifies traps. It checks if the price has "swept" the liquidity (Low/High) of the last 3 candles on the 1H chart.
2. Visual Indicator Meaning (Status Dots & Colors)The table communicates the market state using a simplified professional color code:ElementStatusMeaningORDER FLOWBULLISH/BEARISH1H momentum is confirmed by an FVG in the direction of the EMA 200 trend.LIQUIDITYLIQUIDITY GRABA "Sweep" has occurred (liquidity was taken) within the last 3 hours.STRATEGYREADY TO TRADE All conditions are aligned. It is time to look for an entry on the 5-minute chart.
3. Unified Global Alert System
The alert is the "guardian" of your strategy:
Operation: Monitors both directions (Long and Short) with a single setup.
Trigger: You receive a notification only when the Strategy row turns READY TO TRADE.
Message: The notification clearly states the ticker (e.g., BTCUSDT) and the direction (BULLISH or BEARISH) so you don't waste time.
How to use it:
Set the Alert: While on the 5-minute chart, create an alert for George FX: ELITE Global Signal.
Wait: When the notification hits your phone, open the 5-minute chart.
Execute: Since the 1H context is perfect, you only need to find a local entry (like a Market Structure Break) on the 5m chart.
March-May Oct-Dec bank stocks strategyIn the Indian market, banking stocks have some sort of cyclic nature.
If you buy at the start of March and sell at the start of May and then buy at the start of Oct and sell at the start of December, you can make gains close to to "buy and hold", while being invested only for 4 months out of 12.
This seems to backtest well for post 2021 on all Bank stocks I tested, including BANKNIFTY as well
Caveat: Not calculating STCG and other expenses caused by selling and buying 2 times every year.
MT Trading Smart MoneyMT Trading 'Smart Money'
MT Trading SM is a market analysis tool based on Smart Money Concepts, designed to identify market context, probable price scenarios, and a structured trading plan — without generating direct buy or sell signals.
The indicator does not try to predict exact price movements or force entries.
Its purpose is to guide the trader’s decision-making process by clarifying what the market is most likely to do next and under which conditions a trade makes sense.
🔹 What the indicator does
Determines swing market context (bullish / bearish / neutral)
Analyzes market structure (BOS / CHoCH)
Tracks relevant swing order blocks
Evaluates whether price is within Smart Money areas of interest
Provides contextual trade planning, not signals
🧠 Bias / Scenario / Plan Dashboard
Instead of entry signals, the indicator displays an analytical dashboard:
Bias — probable market direction
Scenario — what price is likely to do next
Plan — how the trader should react
Example:
Bias: BEARISH ↓
Scenario: Pullback expected
Plan: Wait for price to return to premium zone and confirm structure
⚠️ Important Notes
No take-profit or risk-reward calculations
No forced entries without structure confirmation
Designed for discipline and patience, not impulsive trading
Best used alongside price action and proper risk management
🎯 Who this tool is for
Traders using Smart Money Concepts
Those who want clarity over prediction
Traders focused on structure and zones, not indicators
Traders who value planning over frequency
🧠 Core Philosophy
Not trading is also a valid decision.
This tool helps identify when the market offers no real advantage and prevents unnecessary trades.
Predator UAV🛩️ Predator UAV — Indicator Overview
Predator UAV is a multi-module market structure & execution assistant.
Think of it as 4 sensors on a drone, each scanning a different layer of price:
Module What it Sees Why it Matters
Module 1 Swing Structure (ZigZag) Trend direction & key levels
Module 2 FVGs, Imbalances, Targets, D/W/M levels Liquidity & objectives
Module 3 Swing Labels + Candle Patterns Entry timing & confirmation
Module 4 VWAP + Slope Dashboard Intraday bias & strength
You can turn any module ON/OFF independently.
🧩 MODULE 1 — ZigZag Swing High / Low (Market Structure)
What it does
Detects Swing Highs (HH / LH) and Swing Lows (HL / LL)
Draws:
Horizontal structure levels
ZigZag connections
Broken vs respected levels
Shows current swing direction in a mini table
How to use it
Bullish structure → higher lows forming
Bearish structure → lower highs forming
Best used for:
Bias filtering
Stop placement
Avoiding counter-trend trades
💡 Pro tip:
If price breaks a swing level and holds → structure shift confirmed.
🧱 MODULE 2 — FVGs, Imbalances, Targets & HTF Levels (Liquidity Engine)
This is the core execution intelligence.
A️⃣ Fair Value Gaps (FVGs)
Bullish FVG → price inefficiency below price
Bearish FVG → inefficiency above price
Options:
Extend none / limited / default
Limit number on chart
Show midpoint equilibrium
Usage
Price returning into FVG = high-probability reaction zone
Best entries = FVG + structure + VWAP bias
B️⃣ Imbalances
Based on strong displacement candles
Shows where price moved too fast
Usage
Often aligns with:
Breakouts
Stop runs
Momentum continuation
C️⃣ Swing Targets
Automatically marks next logical target
Swing Highs for longs
Swing Lows for shorts
Usage
Use as:
Take-profit zones
Partial exits
Trail stop reference
D️⃣ Previous Day / Week / Month Highs & Lows
Institutional liquidity magnets
Extremely effective on indices & forex
Usage
Expect:
Rejections
Stop hunts
Reversals near these levels
🔍 MODULE 3 — Swing Labels + Candle Patterns (Entry Timing)
This module answers: WHEN to enter?
Swing Labels
HH / HL / LH / LL printed directly on chart
Candle Patterns Detected
Hammer
Inverted Hammer
Bullish Engulfing
Bearish Engulfing
Hanging Man
Shooting Star
Each label includes:
Pattern name
Tooltip explanation (educational)
Usage
Never trade patterns alone
Best when combined with:
FVG
VWAP
Structure level
📐 MODULE 4 — VWAP with Slope Dashboard (Bias & Strength)
This is your intraday compass.
What it shows
Session VWAP
VWAP slope (numeric + angle)
Direction:
↗ Bullish
↘ Bearish
→ Neutral
Strength:
Weak
Moderate
Strong
How to read it
Above VWAP + positive slope → long bias
Below VWAP + negative slope → short bias
Flat slope → scalp only or wait
💡 Pro tip:
Strong VWAP slope + FVG pullback = A-grade setup.
🎯 COMPLETE TRADING TUTORIAL (Step-by-Step)
Step 1 — Determine Bias
Use Module 1 + Module 4
Structure bullish?
VWAP slope bullish?
✅ If aligned → look for longs
❌ If mixed → reduce size or wait
Step 2 — Identify POI (Point of Interest)
Use Module 2
Bullish:
Bullish FVG
Prior swing low
VWAP pullback
Bearish:
Bearish FVG
Prior swing high
VWAP rejection
Step 3 — Wait for Entry Confirmation
Use Module 3
Look for:
Engulfing
Hammer / Shooting star
Swing HL / LH confirmation
Step 4 — Define Targets
Use Next Target
Or Previous Day / Week Highs
Partial TP near first liquidity pool
Step 5 — Risk Management
SL beyond:
FVG boundary
Swing high/low
Trail using:
VWAP
Structure breaks
🧠 Best Timeframes
Purpose TF
Bias 15m / 30m
Setup 5m
Entry 1m–3m
Scalping VWAP + FVG only
⚠️ Common Mistakes to Avoid
❌ Trading every FVG
❌ Ignoring VWAP slope
❌ Counter-trend without confirmation
❌ Overloading chart (turn unused modules off)
🚀 Final Thought
Predator UAV is not a signal generator.
It’s a decision-support system — when multiple modules align, probability shifts in your favor.
Mean Reversion OpportunityIdentifies when price is trading within an established range. Values between +200 and -200 signal mean reversion opportunities. Breaks beyond these levels suggest ranging behavior has ended.
DXY vs Small-Cap Divergence [v6]It creates a dedicated panel to monitor the "tug-of-war" between the US Dollar (DXY) and the Russell 2000 (IWM).
As a swing trader, you are looking for Negative Correlation—specifically, the moment the DXY starts to fall while Small Caps maintain their strength.
How to Interpret This on Your Desktop:
Green Background: This highlights the exact bars where the DXY is dropping while the Russell 2000 is gaining ground. This can be your "Go" signal for the small caps that you are monitoring near pivots, prior levels, POC's, or value area highs or lows.
The Green Line (Bottom of the oscillator): When the line hits -0.8, it means the two assets are moving in nearly perfect opposite directions. For a gold bounce and small-cap rally, you want to see this line deep in the green.
The Red Line (Top of the oscillator): If this line stays near +0.8, it means the Dollar and Stocks are moving together. This usually indicates a "Liquidity Flush" where everything is being sold—stay cautious during these periods.
Midnight Open Retracement [LuxAlgo]The Midnight Open Retracement indicator highlights the 12:00 AM ET opening price and provides real-time probability statistics for price retracing to this level during the New York session.
Designed specifically with NQ (Nasdaq 100) futures data in mind, the tool helps traders identify high-probability "magnet" levels for New York open scalps based on historical performance.
🔶 USAGE
The Midnight Open is a cornerstone of ICT concepts, acting as a "true" daily open that often serves as a point of institutional re-accumulation or distribution. This script automates the identification of this level and provides a dashboard to help traders decide when to expect a retracement.
🔹 Identifying the Bias
The script compares the New York opening price (9:30 AM ET) to the Midnight opening price:
If NY opens above the Midnight Open, the indicator identifies a potential bearish retracement bias toward the level. If NY opens below the Midnight Open, the indicator identifies a potential bullish retracement bias toward the level.
🔹 Using as a Profit Target
Because the Midnight Open is retraced to frequently, it serves as an ideal Take Profit (TP) target for opening range scalps. The indicator marks the exact moment a retracement occurs with a visual marker, confirming the level has been tested.
🔶 DETAILS
The statistics integrated into this tool are based on extensive backtesting of NQ futures over 6-month periods. Understanding these probabilities allows traders to filter out low-conviction setups and focus on high-probability days.
🔹 The Core Probabilities
When price opens above the midnight level, it retraces to touch it 74% of the time. When price opens below the midnight level, it retraces to touch it 63% of the time.
🔹 Weekday Variance
Not all trading days are equal. The script accounts for "By Weekday" statistics:
High Probability (Wednesdays): On Wednesdays, retracement probabilities can jump as high as 89% for opens above the midnight level. Low Probability (Mondays): Mondays often exhibit "Avoid" criteria, with retracement probabilities frequently falling below 60%.
The dashboard dynamically updates the "Probability of Retracement" based on the current day of the week, helping you stay aligned with historical data.
🔶 SETTINGS
🔹 Session Settings
Timezone Mode: Choose between Exchange time or "America/New_York" (recommended for ICT concepts). Midnight Open Time: The specific time used to set the daily baseline. NY Open Time: The time used to determine the session opening bias. NY Session Range: Defines the boundary for the New York session box.
🔹 Visual Settings
Show Midnight Level: Toggles the horizontal line representing the midnight price. Show Retrace Circle: Displays markers on the chart when the retracement goal is met. Show NY Session Box: Draws a dynamic box for the NY session that changes color based on the current price relative to the open.
🔹 Dashboard Settings
Show Insights Report: Toggles the statistics dashboard on the chart. Position/Size: Controls the UI placement and scale of the data table.
High&Low - Scalping🔹 High and Low Scalping – Key Levels Indicator 🔹
High and Low Scalping is an indicator designed for active traders and scalpers who want to instantly identify the most important price levels in the market.
The indicator automatically plots:
📈 The monthly high and low
📊 The previous week's high and low (weekly)
⏱️ The previous day's high and low (daily)
These levels are recognized as major liquidity zones, which are often respected by the price and used by institutions.
⚙️ Main features
✔️ 100% automatic update
✔️ No manual calculations required
✔️ Clear and quick reading of the market
✔️ Compatible with scalping, day trading, and intraday trading
🎯 Why use High and Low Scalping?
Identify price reaction zones
Spot precise scalping opportunities
Improve entry and exit timing
Trade with a clean and objective market structure
This indicator is an essential tool for any trader who wants to rely on reliable, simple, and effective technical levels without overloading their chart.
Portfolio Table v5 This lightweight and functional tool allows traders to track multiple stock positions directly on their chart in a clean, organized table. Specifically designed with the Tel Aviv Stock Exchange (TASE) in mind, it includes a built-in toggle to handle price conversions between Agorot and NIS.
guild wcaallows to identify trends and is very good yes it is guild ahh indicator just if yiu know yiou knoq
SPX highlight Risk IndicatorIndicator shows orange bars in instances where:
VIX > 21dma
Spreads > 21dma
% S&P stocks above 50dma < 21dma
Indicator shows red bars in instances where:
VIX > 50dma
Spreads > 50dma
% S&P stocks above 50dma < 50dma
ISM Manufacturing PMIDescription
The ISM Manufacturing PMI (Purchasing Managers' Index) is a key economic indicator derived from monthly surveys of private sector companies. It provides insight into the health of the US manufacturing sector.
Above 50.0: Indicates Expansion.
Below 50.0: Indicates Contraction.
This script visualizes the ISM Manufacturing PMI using TradingView's available economic data (ECONOMICS:USBCOI), providing traders and analysts with a clear view of macroeconomic trends directly on their charts.
Key Features
Intuitive Visualization:
Dynamic Color Coding: The line turns Green during expansion (>50) and Red during contraction (<50).
Baseline Fill: Optional shading between the data line and the 50.0 baseline emphasizes the current economic state.
Histogram Mode: Toggle a histogram view to easily spot momentum shifts.
Customizable Data Source: Defaults to ECONOMICS:USBCOI but can be configured to use other tickers (e.g., FRED:NAPM) if preferred.
Smoothing: Built-in SMA, EMA, RMA, or WMA smoothing to filter out noise and see the longer-term trend.
Alerts: Set alerts for significant crossovers (Expansion/Contraction start) or extreme levels.
How to Use
Add to Chart: Apply the indicator to any chart. It works best on higher timeframes but pulls monthly data automatically.
Interpret the Trend:
Look for the line crossing the 50.0 level. A cross above suggests the manufacturing sector is growing (Bullish for economy). A cross below suggests slowing down or contraction (Bearish for economy).
Watch for extreme readings (above 60 or below 40) which often mark economic peaks or troughs.
Adjust Settings:
Style: Toggle the Line, Histogram, or Fill visibility in the settings.
Smoothing: If the raw data is too jagged, increase the "Smoothing Length" to 3 or 6 months.
Settings
PMI Ticker: Default is ECONOMICS:USBCOI.
Timeframe: Default is 1M (Monthly).
Show Line / Histogram: Toggle visualization modes.
Smoothing: Type and Length of the moving average applied to the data.
Colors: Customize the colors for Expansion (Grow), Contraction (Fall), and Neutral.
Indicator by: iCD_creator
Version: 1.0
---
Updates & Support
For questions, suggestions, or bug reports, please comment below or message the author.
**Like this indicator? Leave a 👍 and share your feedback!**
MTT US Economic Health Z-ScoreTo use the US Economic Health Z-Score, you must set your TradingView chart to a Monthly (M) timeframe. This is critical because the script aggregates high-level data from FRED—such as Manufacturing PMI and Building Permits—which are released on a monthly cycle. Viewing this on a Daily or Intraday chart will result in flat, "stair-step" lines that obscure the true momentum of the data.
How to Interpret the Data
The indicator functions as a normalized macro-filter, converting five distinct economic sectors into a single standard deviation scale.
The 0 Line: Represents the "historical norm."
Individual Colored Lines: Track specific sectors (e.g., Sentiment, Labor, Housing).
The Composite Line (White): This is your aggregate health signal.
Signal Logic
Economic struggle is identified when the Composite Score trends below -1.0 (At Risk) or drops past -1.5 (Struggling). Because these are leading indicators, they often deteriorate months before the stock market reflects the damage. Use this dashboard to identify bearish divergence: if the S&P 500 is rising while the US Economic Health Z-Score is falling, the market is likely ignoring fundamental cracks. This tool is designed to help you shift toward a defensive portfolio posture before the "lagging" data (like the unemployment rate) confirms the downturn.
ETH Swing Planner (Thrust + Chop + BTC Confirm) v3.1 by Sam KimThis is a swing-trading framework designed to keep you out of bad trades, not push you into more of them.
It only activates when the higher-timeframe trend is clear, volatility supports continuation, and the market has actually finished correcting. No buying pullbacks. No forcing entries in chop.
The logic is simple:
• Trade in the direction of the dominant daily trend
• Wait for consolidation, then enter on momentum resumption (“thrust”)
• Avoid choppy, range-bound conditions
• Require Bitcoin confirmation before swinging ETH
• Define risk, stop, and targets before the trade exists
Cash is treated as a position. No-trade conditions are explicit, not emotional.
This tool is built for traders who value patience, structure, and capital preservation over constant action. It favors fewer trades, cleaner entries, and psychological clarity.
Missing a move is acceptable. Being trapped in a bad one is not.
Usanghyang philosophy, coded.
Low Volume CandleOpposite of Volume Candle indicator.
Setting references:
1.25 = <80% of average
1.50 = <67% of average
2.00 = <50% of average
ES VWAP + GEX OverlayAI v6 ES VWAP + GEX Overlay. The system seems to want me to add more text for description before I know it it works.
DG Channel + Reversal Alerts//@version=5
indicator("Channel + Reversal Alerts", overlay=true)
//==================================================
// 1. НАСТРОЙКИ КАНАЛА
//==================================================
length = input.int(100, "Длина канала", minval=10)
// Канал по High / Low (надёжно и наглядно)
upper = ta.highest(high, length)
lower = ta.lowest(low, length)
// Рисуем канал
plot(upper, "Верхняя граница", color=color.red, linewidth=2)
plot(lower, "Нижняя граница", color=color.green, linewidth=2)
//==================================================
// 2. ЛОГИКА КАСАНИЙ
//==================================================
touchUpper = high >= upper
touchLower = low <= lower
touchUpper_first = touchUpper and not touchUpper
touchLower_first = touchLower and not touchLower
//==================================================
// 3. ПРОБОИ И РАЗВОРОТЫ
//==================================================
// Закрытие свечи вне канала
closeAbove = close > upper
closeBelow = close < lower
// Тень вышла за канал, а закрытие внутри
wickAbove = high > upper and close <= upper
wickBelow = low < lower and close >= lower
// Разворот = закрытие ИЛИ тень вне канала
reversalUpper = closeAbove or wickAbove
reversalLower = closeBelow or wickBelow
// Только первое появление, чтобы не спамило
reversalUpper_first = reversalUpper and not reversalUpper
reversalLower_first = reversalLower and not reversalLower
//==================================================
// 4. АЛЕРТЫ
//==================================================
// КАСАНИЕ
alertcondition(touchUpper_first, title="Upper touch", message="⬆️ касание")
alertcondition(touchLower_first, title="Lower touch", message="⬇️ касание")
// РАЗВОРОТ
alertcondition(reversalUpper_first, title="Upper reversal", message="⬆️ разворот")
alertcondition(reversalLower_first, title="Lower reversal", message="⬇️ разворот")






















