ابدأ الآن

المتوسطات المتحركة

GCM Price Volume Trend [Dual Signal Ribbon]1. Title GCM Price Volume Trend 2. Description (Copy & Paste) Overview The GCM Price Volume Trend (PVT) is an advanced enhancement of the classic Price Volume Trend indicator. While standard PVT indicators typically use a single signal line, this version introduces a Dual Signal Ribbon System. This allows traders to visualize trend strength, filter out market noise, and identify momentum shifts more accurately. This script is built upon the foundational logic of the Price Volume Trend indicator by @everget, upgraded here to Pine Script v6 with significant functional additions. How It Works The Price Volume Trend (PVT) is similar to On Balance Volume (OBV), but with a key difference: while OBV adds all volume on an up day, PVT adds only a portion of the volume proportional to the percentage price change. This makes PVT a more accurate representation of money flow relative to price movement. Key Features in This Version 1. Dual Signal Ribbon: Unlike the original single-line version, this indicator plots two signal lines. The area between them acts as a "Cloud" or "Ribbon." o Green Ribbon: Indicates strong bullish momentum. o Red Ribbon: Indicates bearish momentum. o Narrow/Twisting Ribbon: Indicates consolidation or indecision. 2. 7 Smoothing Algorithms: You are no longer limited to just SMA or EMA. You can independently set both signal lines to use: o SMA (Simple) o EMA (Exponential) o WMA (Weighted) o RMA (Rolling/Wilder's) o HMA (Hull - Great for reducing lag) o VWMA (Volume Weighted) o LSMA (Least Squares / Linear Regression) 3. Visual Customization: Fully standardized coloring system with adjustable opacity for the ribbons to keep your chart clean. How to Use • Trend Following: When the main PVT line is above both signal lines and the ribbon is Green, the trend is Bullish. • Crossovers: A crossover of the PVT line above the Primary Signal (Signal 1) is an early entry warning. A crossover above the Secondary Signal (Signal 2) confirms the trend. • Divergence: If Price makes a Higher High but the PVT line makes a Lower High (and fails to break above the ribbon), look for a potential reversal. Settings • Signal 1 & 2 Type/Length: Customize the sensitivity of the ribbon. • Style & Colors: Adjust Bull/Bear colors and transparency levels to fit your dark or light theme. Credits • Original PVT script logic inspired by @everget. • Modifications, Dual-Signal logic, and v6 upgrade by @uniGram.
مؤشر Pine Script®
من ‎uniGram‎
Zero Lag Moving Average Convergence Divergence (ZLMACD) [EVAI]Zero Lag Moving Average Convergence Divergence (ZLMACD) ZLMACD is a MACD-style momentum oscillator that keeps the standard MACD structure while adding a practical “zero-lag” option through ZLEMA. It is intended for traders who like the familiar MACD workflow but want an oscillator that can respond earlier during transitions without turning into an overly noisy trigger. The indicator plots the MACD line, the signal line, and the histogram around a zero baseline. If you already understand MACD, you already understand how to read this. The difference is that you can choose whether the oscillator and signal are driven by EMA, SMA, or ZLEMA, which changes the responsiveness and smoothness of the indicator. Default behavior This script defaults to the preset mode “ZLEMA osc + EMA signal.” In this configuration, the fast and slow oscillator averages are computed using ZLEMA, while the signal line remains an EMA of the MACD line. The reason for this mix is simple: ZLEMA tends to reduce lag in the oscillator, while EMA on the signal line helps keep crossovers readable and avoids excessive micro-signals. In practice, this default preset often behaves like a “faster MACD” that still feels like MACD. It can highlight momentum turns earlier than a traditional EMA MACD while keeping the signal line stable enough to use for timing and confirmation. Custom mode and MA selection If you switch Mode to “Custom,” the indicator will use your selected moving average types for both the oscillator and the signal line. In Custom mode, the oscillator type applies to both fast and slow averages, and the signal type applies to the smoothing of the MACD line. If you are in the default preset mode, the custom MA dropdowns will not change the calculations. This is intentional: the preset locks the MA types so the default behavior remains consistent and reproducible across charts and users. Reading the indicator The histogram reflects the distance between the MACD line and the signal line. When the histogram is above zero, the MACD line is above the signal line and momentum is biased upward; when it is below zero, the MACD line is below the signal line and momentum is biased downward. Changes in histogram height help visualize strengthening versus weakening momentum, while the zero baseline provides regime context by indicating whether the fast average is above or below the slow average. Crossovers between MACD and signal behave exactly as they do in standard MACD, but the timing and “feel” will vary depending on the MA choices. ZLEMA on the oscillator typically makes turns appear earlier; SMA typically smooths more but can be slower; EMA tends to be the balanced baseline. Alerts Two alert conditions are included to detect histogram polarity shifts. One triggers when the histogram switches from non-negative to negative, and the other triggers when it switches from non-positive to positive. These are useful if you want simple notifications for momentum regime flips without staring at the chart continuously. Notes This indicator is provided for informational and educational purposes only and is not financial advice. Always test settings per instrument and timeframe and use risk management.
مؤشر Pine Script®
من ‎evaiinvesting‎
ChromaFlows Momentum Index - Consensus Engine V1.2ChromaFlows Momentum Index — Conceptual Description Overview ChromaFlows Momentum Index is a momentum-analysis tool designed to evaluate trend quality and directional agreement by combining multiple oscillators into a single consensus-based system. Rather than displaying independent signals from separate indicators, this script produces output only when all internal engines align, filtering out conflicting or low-quality momentum conditions. The goal is not to generate standalone trading signals, but to provide a clear visual representation of momentum consensus and regime strength. Conceptual Architecture The indicator is built around three momentum engines, each assigned a distinct functional role: Slow Stochastic — acts as the primary momentum baseline, defining the broader overbought/oversold context. Fast Stochastic — functions as a short-term acceleration filter, detecting rapid changes in momentum relative to the baseline. RSI — serves as a regime validator, confirming whether momentum conditions are stable enough to be considered directional. These components are not averaged or displayed independently. Each engine is conditionally dependent on the others. Interaction & Consensus Logic ChromaFlows uses a strict consensus model: A directional state is produced only when all momentum engines agree on direction. If even one engine diverges, the system suppresses directional output and enters a neutral state. This logic prevents partial or conflicting momentum signals from being displayed and reduces noise commonly produced by single-indicator oscillators. The resulting output represents agreement quality, not raw oscillator values. Visual Output & Interpretation The main oscillator wave represents the current momentum state derived from the consensus logic: Bullish Consensus — all engines aligned to the upside Bearish Consensus — all engines aligned to the downside Neutral State — disagreement or low-quality momentum Additional visual elements (signal markers and trend filters) are derived from the same internal state, providing contextual confirmation rather than independent signals. These visuals are intended to help users interpret momentum context, not to automate execution. Originality & Purpose This script is not a visual mashup of existing indicators. Its output cannot be replicated by observing the individual components separately, as the system’s behavior depends on conditional interaction and suppression logic between engines. By requiring full agreement before displaying momentum states, ChromaFlows emphasizes momentum clarity over signal frequency, making it suitable as a contextual analysis layer within broader trading frameworks. Usage Notes ChromaFlows Momentum Index is a visual analysis tool designed to assist with market interpretation. It does not provide investment advice or guarantee outcomes and should be used in conjunction with other forms of analysis and risk management. Version Notes (V1.2) • Expanded divergence detection logic added for SMI line for improved momentum context • Minor internal optimizations and code refinements
مؤشر Pine Script®
من ‎Horazio‎
MADZ - Moving Average Deviation Z-ScoreMADZ - Moving Average Deviation Z-Score MADZ is a powerful valuation oscillator that measures how far the current price has deviated from a user-selected moving average, expressed in statistical terms as a Z-Score. This normalization makes it easier to identify overvalued and undervalued conditions across different assets, timeframes, and market environments. Overview The indicator works by: Calculating the percentage deviation of price from a customizable moving average (SMA, EMA, WMA, VWMA, HMA, or RMA). Applying a Z-Score transformation to this deviation over a chosen lookback period — showing how many standard deviations the current deviation is from its historical average. Smoothing the result for a clean, responsive oscillator centered around zero. Positive values indicate price is trading above the moving average (potentially overvalued), while negative values suggest price is below (potentially undervalued). The further from zero, the greater the relative valuation extreme. Key Features Customizable base moving average (type and length) Z-Score normalization for statistically meaningful readings Final smoothing for reduced noise Static overbought/oversold levels (default ±1.5) — line changes color when crossed (red above, green below) Dynamic extreme bands (±3σ) — optional display of bands calculated from the oscillator’s own volatility over a user-defined period Extreme zone highlighting — background shading activates only during truly rare valuation events Extreme Zone Highlighting Explained The highlighted extreme zones (background shading) are not based on the fixed static levels. Instead, they signal statistically significant outliers using dynamic bands: Overbought extreme zone (red background): Triggered when MADZ rises above the upper dynamic band (+3 standard deviations of the MADZ line itself over the dynamic length period). Oversold extreme zone (green background): Triggered when MADZ falls below the lower dynamic band (-3 standard deviations). These ±3σ bands adapt to the recent behavior of the oscillator. Because they represent three standard deviations from the mean of MADZ, crossings are rare and often precede major reversals or trend accelerations — making them valuable for spotting potential turning points in valuation extremes. How to Use Use zero-line crosses for trend changes or mean-reversion setups. Watch static level crossings (±1.5 default) for early overbought/oversold warnings. Pay special attention to extreme zone shading — these highlight high-conviction valuation dislocations that may offer superior risk/reward opportunities. Designed on the BTC chart, but can be used on other assets. Settings Moving Average Settings: Type, length, source Z-Score & Smoothing: Lookback period and smoothing length Threshold Levels: Static overbought/oversold thresholds Display Options: Toggle dynamic bands and extreme background highlighting This is an educational tool designed to aid in valuation analysis. The information provided is not financial advice. Always conduct your own research and consider multiple factors before making trading decisions. Trade at your own risk.
مؤشر Pine Script®
من ‎MiesOnCharts‎
MA-MTF-12 Overlay📊 MA-MTF-12 Overlay — Indicator Description ■ Overview MA-MTF-12 Overlay is a multi-timeframe moving average indicator that allows you to display up to 12 moving averages (SMA / EMA) simultaneously, calculated either from the current timeframe (Local) or from higher timeframes (MTF). It is designed to help traders visualize short-term price action and higher-timeframe market structure on a single chart, enabling clearer trend context and better decision-making. ■ Key Features ✅ Up to 12 Moving Averages Display MA1–MA12 independently Choose SMA or EMA for each MA Fully customizable length, color, and line width ✅ Per-MA Local / MTF Selection Each moving average can be set individually to: Local – calculated on the current chart timeframe MTF – retrieved from a higher timeframe (e.g. 1H, 4H, Daily, Weekly, Monthly) This allows you to clearly separate entry signals from higher-timeframe trend context. ✅ Confirmed Bar Mode (Repaint Control) When using MTF, each MA supports Confirmed Bar Mode: ON – updates only after the higher-timeframe bar is closed (minimal repaint, backtest-friendly) OFF – follows the current higher-timeframe bar in real time (discretionary trading) ✅ Gap Handling Option Gaps OFF – higher-timeframe values are filled smoothly (step-style, easier to read) Gaps ON – values appear only when a higher-timeframe bar updates (theoretical accuracy) ✅ Lightweight & Efficient Design Each MA includes separate: Calculation ON / OFF Display ON / OFF Unused MAs can be completely disabled, preventing unnecessary calculations and keeping the indicator fast even with multiple MTF sources. ■ Example Use Case MA1–MA3: Local timeframe MAs for short-term momentum MA4–MA6: Higher-timeframe MAs (4H / Daily / Weekly) for trend structure MA7–MA12: Optional layers, disabled by default This setup makes it easy to understand where price is trading within the broader market context. ■ Who This Indicator Is For Traders who rely on multi-timeframe trend analysis Scalpers, day traders, and swing traders who want one-chart clarity Users concerned about repainting and indicator performance Anyone who uses moving averages as structural reference points, not just signals ■ Technical Notes Pine Script v5 Overlay indicator (drawn on price chart) Multi-timeframe support via request.security() No alerts or shapes — pure visual analysis 📊 MA-MTF-12 Overlay – インジケーター解説 ■ 概要 MA-MTF-12 Overlay** は、 最大12本の移動平均（SMA / EMA）を、現在足（Local）または上位足（MTF）から自由に組み合わせて表示できる** マルチタイムフレーム対応の高機能MAインジケーターです。 短期足の値動きから、1時間・4時間・日足・週足・月足といった 上位足のトレンド環境を、1つのチャート上で同時に把握**することを目的に設計されています。 --- ■ 主な特徴 ✅ 最大12本のMAを同時表示 * MA1〜MA12を個別に設定可能 * SMA / EMA をMAごとに選択 * 期間・色・太さもすべて自由にカスタマイズ --- ✅ Local / MTF をMAごとに切替可能 各MAは以下を個別に選択できます。 Local：現在のチャート時間足で計算 MTF：指定した上位足（例：1H / 4H / D / W / M）から取得 👉 短期MAはLocal、 環境認識用MAはMTF、 という役割分担を1つのインジケーターで実現できます。 --- ✅ 確定足モード（リペイント制御） MTF使用時は、確定足モードをMAごとに設定可能。 ON：上位足が確定してから更新（リペイント最小・検証向き） OFF：上位足の進行中の値もリアルタイムで反映（裁量トレード向き） 用途に応じて柔軟に使い分けられます。 --- ✅ ギャップ表示 ON / OFF OFF：上位足MAを階段状に補完表示（視認性重視） ON：上位足更新点のみ表示（理論重視） --- ✅ 計算ON / 表示ON を分離した軽量設計 各MAには 計算ON / OFF 表示ON / OFF** を個別に用意。 使わないMAは計算そのものを停止できるため、 MTFを多用しても**動作が重くなりにくい設計です。 --- ■ 想定される使い方 * MA1〜MA3：Local（短期〜中期の勢い把握） * MA4〜MA6：MTF（4H・日足・週足のトレンド環境） * MA7〜MA12：必要に応じて追加（初期はOFF） 👉 「今どの時間軸のトレンドの中にいるのか」を MAだけで直感的に把握できます。 --- ■ こんな方におすすめ * 上位足MAを使った環境認識を重視するトレーダー * スキャル・デイトレ・スイングを1チャートで完結させたい方 * MTFインジケーターのリペイントや重さが気になる方 * MAを「本数・役割・時間軸」で整理して使いたい方 --- ■ 技術仕様 * Pine Script v5 * overlay=true（価格チャート上に表示） * MTF対応（request.security 使用） * アラート・シェイプなし（純粋な分析用） ---
مؤشر Pine Script®
من ‎kumono-yoda‎
ADIBABA - 4x EMAThis indicator is based on the Exponential Moving Average (EMA) and is designed to help traders identify trend direction, momentum, and price structure with clarity. The script provides fully customizable EMA length along with an optional Smoothing EMA (SMS), allowing traders to fine-tune the indicator according to their trading style and market conditions. It is suitable for intraday, swing, and positional traders and works well across multiple asset classes. How It Works • The primary EMA follows price movement and defines the trend • The smoothing EMA reduces market noise and improves signal quality • Price above EMA indicates a bullish bias • Price below EMA indicates a bearish bias This combination helps filter false signals and provides stronger trend confirmation.
مؤشر Pine Script®
من ‎sagarrjain1986‎
Banana MA Ribbon 12Banana MA Ribbon 12 plots 12 configurable EMAs or SMAs for technical trend and structure analysis. EMA 21, EMA 50, and EMA 200 are visually emphasized to represent key market structure. Trend direction is defined by the relationship between EMA 21 and EMA 50. Optional trend coloring and small markers highlight the start of new bullish or bearish phases. Settings Overview: Trend Coloring ON/OFF: Enables or disables trend-based coloring using EMA 21 and EMA 50 MA Type: Selects the moving average calculation method (EMA or SMA). EMA Lengths (1–12): All moving average periods are manually configurable. Show only EMA21, 50, 200: Hides all minor averages and displays only the primary structure EMAs. Show trend start dots: Displays small markers when EMA 21 crosses EMA 50, indicating a potential trend change. Style Tab (TradingView): Colors and line widths of each EMA can be adjusted individually. Have fun :-)
مؤشر Pine Script®
من ‎SannaBanana‎
Quad-EMA Strategy (10/20/30/50)This indicator combines four exponential moving averages (10, 20, 30, 50) into a single, clean framework designed for scalping, short-term trading, and trend participation. Although optimized for long-side trend participation, the EMA structure remains symmetric and usable for short-selling. While it is highly effective on lower timeframes, it also translates well to the daily chart, especially in well-defined trends. Core Trend Logic On the daily timeframe, a trend can be considered healthy as long as price respects the 10 EMA. As long as candles hold above it, the structure remains intact. A clean daily close below the 10 EMA is treated as a discipline-based exit signal. Not because the trend must be over — but because risk begins to increase. There are exceptions: After extended multi-day advances, a single pullback day slightly below the 10 EMA can occur. In those cases, partial profit-taking (“taking chips off the table”) is often a reasonable and pragmatic move. This is not about perfection — it’s about capital preservation. Volatility & Pullbacks In more volatile conditions, price may pull back toward the 20 EMA or even the 30 EMA. From a strict risk-management perspective, this is typically where the trade should already be closed. If a trader chooses to remain involved during such phases — especially after a strong push into a local high followed by sideways consolidation — the EMAs will often compress and flatten, forming a “sideways river.” During this phase: Price may temporarily dip below the 20 or 30 EMA This alone is not a guaranteed signal that the trend is over Context and structure matter Riding the Wave (with Discipline) The philosophy here is simple: Ride the trend — but exit early. Even after the 10 EMA is breached, price will often: -Reclaim momentum -Continue higher without you That is normal. Missing continuation is the cost of discipline, not a mistake. More aggressive traders may tolerate pullbacks to the 20 or 30 EMA — and sometimes that works.This framework, however, follows a “cockroach strategy”: exit at the first clear sign of stress, not at the last possible moment. The Final Line in the Sand The 50 EMA should be viewed as the latest and clearest exit zone. Below this level: -Direction becomes uncertain -The market may form a local top -Volatility and chop increase At that point, prediction is pointless — and unnecessary. The trade should already be closed. If you find yourself still searching for an exit below the 50 EMA, that is a signal in itself: risk has taken control of the trade. Final Note This indicator does not predict. It reacts. How strictly you trade the EMAs is a personal choice — but the structure provides a clear, repeatable framework for trend participation and risk control. Discipline first. Profits second. Disclaimer: This indicator and its description reflect my personal views and market observations. They are provided for educational and informational purposes only and do not constitute financial or investment advice.
مؤشر Pine Script®
من ‎GER-Quality-Trades‎
2
EMA Slope - RSI Indicator# EMA Slope - RSI Indicator ## Script Description (for Publishing Page) **EMA Slope - RSI Indicator** combines normalized EMA slope momentum analysis with RSI divergence detection and momentum comparison to create a visual signal indicator with five distinct signal types. The indicator's originality lies in its unique "No Trade Zone" (NTZ) concept applied to slope momentum, combined with centered RSI format for direct comparison, and multiple complementary signal methods that work together to identify both trend-following and reversal opportunities across different market conditions. **Core Concept - EMA Slope Normalization:** Calculates rate of change of long MA (default 160 EMA) by comparing current value to N bars ago (default 3 bars). Raw slope difference normalized to -100 to +100 scale using 500-bar rolling range: normalizedSlope = 100 * (longMA - longMA ) / (highest(maDF, 500) - lowest(maDF, 500)). Creates consistent momentum oscillator comparable across price levels and timeframes. **No Trade Zone (NTZ) Logic:** NTZ (±8 default) creates neutral zone where slope momentum is too weak for reliable signals. Indicator only triggers NTZ Cross signals when slope crosses out of threshold zone, ensuring signals occur only when momentum is sufficiently strong. **Centered RSI Format (RSI-50):** Traditional RSI (0-100 range) difficult to compare with slope. This indicator uses centered RSI = (RSI - 50), creating -50 to +50 range zero-centered on same scale as normalized slope. Enables direct visual and mathematical comparison between RSI and slope momentum, enabling Slope-RSI exhaustion detection and RSI-Slope Oscillator signals. **Component Integration:** Five signal types target different market conditions. NTZ Cross and Acceleration target trend-following when momentum strong. RSI Divergence and Slope-RSI Divergence target reversals when price/momentum diverge. RSI-Slope Oscillator targets momentum alignment when RSI and slope converge. Multi-method approach provides signals across trending, reversing, and ranging markets. ### 📊 Technical Calculations **Slope Normalization:** maDF = longMA - longMA , normalized: maDf = 100 * maDF / (highest(maDF, 500) - lowest(maDF, 500)), ranges -100 to +100. **Acceleration Detection:** maAcce = abs(maDf - maDf ) * smoothBars * 2, normalized: maAcc = 50 * maAcce / highest(maAcce, 200). Values above threshold (35 display, 40 signals) indicate sudden momentum shifts. Visualized as colored circles: cyan (bullish), red (bearish). **RSI Calculation:** rsi = sma(rsi(source, length), smoothing), centered: cRsi = rsi - 50 (ranges -50 to +50). Smoothed using SMA (default 3 bars) to reduce noise. **RSI Divergence:** Uses pivot high/low detection on smoothed RSI. Pivot lookback = 16 - sensitivityInput (inverse: sensitivity 6 = 10-bar lookback, sensitivity 10 = 6-bar lookback). Compares price pivots (actual high/low including wicks) against RSI pivots. Bullish: priceLowerLow AND rsiHigherLow. Bearish: priceHigherHigh AND rsiLowerHigh. Stores multiple previous pivots (default 8 max) for comparison. **Slope-RSI Exhaustion:** Compares normalized slope against centered RSI on same scale. Bearish: slope accelerating up (delta > 0, slope > NTZ) BUT RSI declining (cRsi < cRsi AND cRsi < cRsi ). Bullish: slope accelerating down (delta < 0, slope < -NTZ) BUT RSI rising. Gap threshold (default 10.0 points) filters noise. Visualized with dashed lines and gap labels. **RSI-Slope Oscillator:** State machine tracks cross events (rsiSlopeCrossUp = cRsi > maDf AND cRsi <= maDf ), waits for confirmation: both RSI and slope heading same direction. Long: RSI crosses above slope AND both heading UP. Short: RSI crosses below slope AND both heading DOWN. Useful for range-bound markets. **Stretch Filter:** maPercentDiff = (longMA - shortMA) / shortMA * 100. Blocks long signals if longMA > shortMA by threshold (overextended up). Blocks short signals if shortMA > longMA by threshold (overextended down). Default 0.45% prevents signals when MAs too far apart. **Delta Calculation:** Measures change in normalized slope between bars. Timeframe mode: compares current confirmed slope with previous confirmed (more reliable, slight delay). Standard mode: compares current with previous bar (faster, may use unconfirmed). Minimum threshold (default 3.4) filters weak momentum changes. **Trailing Stop (Blackflag FTS Swingarm):** Uses Wilder's MA of true range. Modified mode: trueRange = max(HiLo, HRef, LRef) with enhanced gap handling. Unmodified: standard true range. Trailing stop calculated based on ATR factor and price trend direction. Separate settings for divergence signals (wider stops, grace periods). ### 🚀 Signal Types and Conditions **1. NTZ Cross Signals:** Long: Slope crosses above +NTZ (default +8) AND positive delta ≥ threshold (default 3.4) AND stretch filter allows AND optional trend confirmation (short MA > long MA). Short: Slope crosses below -NTZ AND negative delta ≥ threshold AND filters allow. Exit: Slope re-enters NTZ OR reverses direction for confirmation bars OR trailing stop. **2. Acceleration Signals:** Long: Acceleration ≥ threshold (default 40) AND slope above NTZ AND positive delta sufficient AND filters allow. Short: Acceleration ≥ threshold AND slope below -NTZ AND negative delta sufficient AND filters allow. Visual: Colored circles (cyan bullish, red bearish). Works independently to catch sudden momentum bursts. **3. RSI Divergence Signals:** Bullish: Price lower low while smoothed RSI higher low, detected via pivot comparison (default up to 8 pivots). Bearish: Price higher high while RSI lower high. Optional Slope-RSI confirmation. Visual: Purple lines (bearish), lime lines (bullish). Exit: Divergence-specific trailing stop (wider ATR, grace period). **4. Slope-RSI Divergence Signals:** Bullish: Slope accelerating down (negative delta, slope < -NTZ) BUT RSI rising over lookback AND gap exceeds threshold (default 10.0 points). Bearish: Slope accelerating up (positive delta, slope > NTZ) BUT RSI declining AND gap exceeds threshold. Visual: Orange triangles (bullish exhaustion), yellow triangles (bearish exhaustion) with dashed lines. Exit: Divergence-specific trailing stop. **5. RSI-Slope Oscillator Signals:** Long: RSI crosses above slope AND both heading upward. Short: RSI crosses below slope AND both heading downward. State machine tracks cross then confirms direction. Exit: Opposite oscillator condition (allows reversal) OR trailing stop after grace period. ### 📖 How to Use **Adding to Chart:** TradingView → Indicators → Search "EMA Slope - RSI Indicator" → Add (displays in separate pane below price). **Visual Elements:** Colored area = normalized EMA slope (Green = bullish above NTZ, Red = bearish below -NTZ, Gray = NTZ zone). Blue line = Centered RSI (-50 to +50). Colored circles = Acceleration (Cyan = bullish, Red = bearish). Green triangles (↑) = Long signals (bottom). Red triangles (↓) = Short signals (top). Orange X = Exit signals. Dashed lines = NTZ boundaries. Purple/Lime lines = RSI divergences. Orange/Yellow triangles = Slope-RSI exhaustion. Table (top-right) = Current Slope, RSI, Gap values. **Parameter Configuration:** MA Settings: Short 40 (stretch filter), Long 160 (slope), Types: SMA/EMA/DEMA/TEMA/WMA/VWMA/SMWMA/SWMA/HMA. Ratios: 20/80 (fast), 40/160 (standard), 50/200 (slow). Core: NTZ Threshold 8 (5-6 more signals, 10-12 stronger), Min Delta 3.4 (5-10 stronger, 1-3 sensitive), Max Stretch 0.45% (0.3% conservative, 1.0% permissive, 0 disable), Use Timeframe Delta true (confirmed bar vs previous bar). RSI: Length 14, Smoothing 3, Source close. Divergence: Sensitivity 6 (higher = more sensitive, 6 = 10-bar lookback, 10 = 6-bar lookback), Max Peaks 8 (2-15 range), Show Divergences true. Slope-RSI: Lookback 4 (2-10, higher = conservative), Min Gap 10.0 pts (0-100, higher = strong only, 0 disable), Show Exhaustion true. Signal Enables: NTZ Cross true, Acceleration true, RSI Divergence false, Slope-RSI Divergence true, RSI-Slope Oscillator true, Require Slope-RSI Confirmation false. Exit: Confirmation Bars 4 (0-10, 0 immediate, 2-4 filters false), Show Trailing Stop true, Trail Type Modified/Unmodified, ATR Period 10, ATR Factor 4.0 (2-3 tight, 4 standard, 5-6 wide), Divergence Grace 3 bars, Divergence ATR 4.0 (recommend 5-8), Oscillator Grace 3 bars, Oscillator ATR 4.0. **Alerts:** Right-click indicator pane → Add Alert → Choose condition (Long/Short Entry/Exit) → Configure notifications. **Interpreting Signals:** Trending Markets: Focus NTZ Cross and Acceleration, higher NTZ (10-12) for stronger signals, use trend confirmation. Reversal Opportunities: Enable RSI Divergence and Slope-RSI Divergence, look for exhaustion markers and divergence lines, use wider stops. Range-Bound: Enable RSI-Slope Oscillator, signals when RSI and slope align, allows position reversal. Multi-Timeframe: Higher TF for trend, lower TF for timing, stronger when aligned. Market Adjustments: Crypto 20/80 MA, NTZ 6-7, Delta 4-5 | Forex 40/160 MA, NTZ 8, Delta 3.4 | Stocks 50/200 MA, NTZ 10-12, Delta 2-3. ### 📈 Use Cases Day Trading (5m-15m, fast MAs 20/80), Swing Trading (1h-4h, standard 40/160), Position Trading (4h-Daily, slow 50/200), Trend Following (NTZ Cross/Acceleration in trends), Reversal Trading (RSI Divergence/Slope-RSI at reversals), Range Trading (RSI-Slope Oscillator in choppy markets), Momentum Analysis (Centered RSI and normalized slope comparison), Trend Exhaustion Detection (Slope-RSI exhaustion markers). ### ⚠️ Important Disclaimer **THIS IS NOT FINANCIAL ADVICE** This indicator is for educational and informational purposes only. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. No guarantee of accuracy - signals may be false. Not professional financial advice - consult a qualified advisor. Use only as part of comprehensive analysis. Always use proper risk management. Combine with other analysis techniques before making trading decisions. Indicator signals don't guarantee profitable trades. You are solely responsible for trading decisions and risk management. By using this indicator, you acknowledge understanding the risks and that you use it at your own risk. Never invest more than you can afford to lose. Works on all markets: Crypto, Forex, Stocks, Commodities, Futures ## Short Description (for Script Header - 200-300 chars) Visual signal indicator combining normalized EMA slope momentum (No Trade Zone concept) with centered RSI format for direct comparison. Five signal types: NTZ momentum crosses, acceleration bursts, price-RSI divergences, slope-RSI exhaustion reversals, and RSI-slope oscillator alignment. Includes stretch filter, exit confirmation bars, and trailing stop exits with separate settings per signal type. ## Tags (for Publishing) EMA, Moving Average, Slope, Momentum, No Trade Zone, NTZ, Indicator, Technical Analysis, RSI, Relative Strength Index, Centered RSI, RSI-50, Divergence, Slope-RSI, Exhaustion, RSI-Slope Oscillator, Normalized Comparison, Stretch Filter, Trend Confirmation, Exit Confirmation, Trailing Stop, Alerts, Signals, Visual Signals, Entry Signals, Exit Signals, Crypto, Forex, Stocks, Futures, Swing Trading, Day Trading, Reversal Trading, Range Trading, Momentum Analysis ## Category **Indicators** → **Momentum**
مؤشر Pine Script®
من ‎xvelox_‎
HA Trend Reclaim Daily Structure Pullback🔹 HA Trend Reclaim — Daily Structure Pullback System HA Trend Reclaim is a professional-grade trend continuation indicator designed to highlight high-probability LONG and SHORT setups using a combination of: Heikin Ashi candle structure EMA trend alignment (9 & 50 EMA) Daily High / Low market structure Pullback → momentum reclaim logic This indicator is built for traders who want clarity, discipline, and structure, not noise or over-signaling. It focuses on trading with the dominant trend, entering only after price pulls back and confirms strength via momentum reclaim. 🔑 What Makes This Different ✔ No counter-trend signals ✔ No breakout chasing ✔ Built-in structure awareness ✔ Clear visual entries & risk levels ✔ Works across stocks, crypto, and futures This script is ideal for traders who prefer fewer, higher-quality trades rather than constant signals. 2️⃣ HOW TO USE (FEATURED-FRIENDLY VERSION) 🟢 LONG Conditions A LONG signal appears when: EMA 9 is above EMA 50 Price is above EMA 50 Price pulls back into the EMA zone Price reclaims EMA 9 upward Heikin Ashi candle closes bullish (not a doji) 🔴 SHORT Conditions A SHORT signal appears when: EMA 9 is below EMA 50 Price is below EMA 50 Price pulls back into the EMA zone Price reclaims EMA 9 downward Heikin Ashi candle closes bearish (not a doji) 📦 Daily Structure Boxes The indicator highlights the daily high–low range: Green box → bullish daily bias Red box → bearish daily bias These boxes help traders avoid: Mid-range chop Late entries Trading against daily momentum 3️⃣ BEST SETTINGS (VERY IMPORTANT FOR USERS) Recommended Timeframes Stocks: 5m, 15m, 1H Crypto: 15m, 1H, 4H Futures: 5m, 15m Recommended Inputs Setting Value EMA Fast 9 EMA Slow 50 Swing Lookback 15 Runner RR 2.0 Heikin Ashi Enabled Show Daily Boxes Enabled Notes Higher timeframes = fewer, stronger signals Avoid low-liquidity instruments Best used during active sessions (London / NY)
مؤشر Pine Script®
من ‎JCW48‎
Moving Average Ribbon - version 4There are many different strategies using Moving Averages such as the Guppy, Super Guppy, Madrid Ribbon and others. Some strategies use one type of calculation over the other. I am not advocating one strategy over another and this indicator is not a particular strategy. It provides up to 27 moving averages. You can choose between Simple, Exponential (default), ALMA, Hull, WMA, RMA and DEMA for the calculation method. You can choose which Moving Averages to show and not show. You can change the lengths of any of the Moving Averages. Some strategies I have seen uses different sources. You can set the source for each individual Moving Average. If you use this indicator more than once on the same chart, you can offset the two indicators if needed. The indicator has two methods for coloring the plots. The default is by direction and order. If going up and the faster MA is higher than the next slower MA, it is bullish. If going down and the faster MA is lower than the next slower MA, it is bearish. Otherwise, it is neutral. An alternate means looks at separation distance. A slower MA will inherit the color of the faster MA if the distance between the two is equal or greater than the previous candle. If standard colors are used, there is a Strong Bear, Weak Bear, Strong Bull and Weak Bull. If you choose to use Alternate colors, you have a Bullish and Bearish color. Defaults are simply set to how I have been using it. I also have it applied on multiple charts across multiple timeframes. It is not a recommendation or promise of best method. I am still experimenting with different layouts.
مؤشر Pine Script®
من ‎gdad‎
Ultimate 20x MA Hub [MTF/SMA/EMA]Ultimate 20x MA Hub This is an all-in-one Moving Average aggregator designed to overcome the indicator limit and keep your chart clean. It allows you to plot up to 20 different Moving Averages within a single indicator instance, with full Multi-Timeframe (MTF) support. Key Features: 20 Lines in 1 Script: Manage all your MAs in one place. Multi-Timeframe (MTF): Each line can have its own independent timeframe. For example, you can view a Daily 200 SMA while trading on a 15-minute chart. SMA & EMA Support: Freely switch between Simple and Exponential Moving Averages for each line. No Repainting: The MTF logic uses barmerge.gaps_on to ensure historical data does not repaint, providing a realistic backtest view. Custom Styling: Supports different line widths and styles (e.g., dotted lines (circles) for specific MAs). Default Configuration (Trend Setup): MA 1: Daily (1D) 30 SMA — Blue Line (Short-term daily trend) MA 2: Weekly (1W) 50 SMA — White Dotted Line (Medium-term weekly support/resistance) MA 3: Weekly (1W) 200 SMA — Red Thick Line (Major long-term bull/bear divider) MA 4 to MA 20 are disabled by default but can be enabled in the settings. How to use: Go to the indicator settings to enable more lines, change periods, or select different timeframes (e.g., "D" for Daily, "W" for Weekly).
مؤشر Pine Script®
من ‎ruleaker‎
VWAP Long Entry PROVWAP Long Entry PRO - Instruction Manual Overview VWAP Long Entry PRO is a Pine Script v6 indicator designed for day traders following Andrew Aziz's VWAP trading methodology from "How to Day Trade for a Living." The indicator identifies high-probability long entry opportunities when stocks bounce off VWAP with proper trend, volume, and timing confirmation. What This Indicator Does The indicator monitors multiple conditions simultaneously and alerts you only when ALL criteria are met for a valid VWAP long entry: 1. ✅ Price is near VWAP (within customizable proximity) 2. ✅ Price crosses above VWAP (bullish candle confirmation) 3. ✅ Uptrend confirmed (EMA 20 > EMA 50) 4. ✅ Volume spike present (volume > 1.5x average) 5. ✅ Within optimal trading hours (default: first 2 hours after market open) Visual Elements on the Chart 1. VWAP Line (Yellow) * Shows the Volume Weighted Average Price for the current session * Acts as dynamic support/resistance 2. EMA Lines * Blue Line: 20-period Exponential Moving Average * Red Line: 50-period Exponential Moving Average * Trend is bullish when blue is above red 3. Green Triangle Markers * Appear below candles when ALL entry conditions are met * These are your entry signals 4. Background Colors * Light Yellow Background: Price is within proximity zone of VWAP * Light Red Background: Price crossed VWAP but filters failed (helps identify missed opportunities) 5. Filter Status Table (Top Right) Real-time dashboard showing current status of all filters: Filter Status Trend ✓ (green) or ✗ (red) Volume ✓ (green) or ✗ (red) Time ✓ (green) or ✗ (red) Near VWAP ✓ (green) or ✗ (red) Entry OK ✓ GO (lime) or ✗ (orange) How to Use the Indicator Step 1: Apply to Your Watchlist 1. Add VWAP Long Entry PRO to charts of stocks on your morning gappers watchlist 2. Use 1-minute, 2-minute, or 5-minute timeframes 3. Monitor multiple stocks simultaneously Step 2: Wait for Setup Watch the Filter Status Table in the top right corner. A valid entry requires: * All filters showing green ✓ * "Entry OK" showing ✓ GO in lime/green Step 3: Execute the Trade When a green triangle appears below a candle: * Entry: Enter long at or near the close of that candle * Stop Loss: Place stop just below VWAP (typically 2-5 cents below) * Profit Target: Use resistance levels, previous highs, or VWAP + ATR Step 4: Manage the Trade * Hold as long as price stays above VWAP * Exit if price closes back below VWAP * Scale out at resistance levels Customizable Settings Access settings by clicking the gear icon next to the indicator name. VWAP Proximity * Default: 0.002 (0.2%) * Purpose: Defines how close price must be to VWAP * Adjust If: * Too many signals → increase (e.g., 0.001 = 0.1%) * Too few signals → decrease (e.g., 0.003 = 0.3%) Filters Group Trend Filter * Use Trend Filter: Toggle on/off * EMA 20 Length: Default 20 * EMA 50 Length: Default 50 * Purpose: Ensures you're trading with the trend * Disable If: Trading reversals or range-bound stocks Volume Filter * Use Volume Filter: Toggle on/off * Volume Multiplier: Default 1.5 (volume must be 1.5x average) * Volume Average Period: Default 20 bars * Purpose: Confirms institutional participation * Adjust If: * Too restrictive → lower to 1.2x * Need stronger confirmation → increase to 2.0x Time Filter * Use Time Filter: Toggle on/off * Start Hour (EST): Default 9 * Start Minute: Default 30 * Hours to Trade: Default 2 * Purpose: Focus on highest probability time window (9:30-11:30 AM EST) * Adjust If: * Trading afternoon momentum → extend hours to 4-6 * Power hour trading → change start to 15:00, 1 hour Alert Setup Creating an Alert 1. Click the Alert Icon (clock) in top toolbar 2. Condition: Select "VWAP Long Entry PRO" 3. Alert Trigger: Choose "VWAP Long Entry PRO" 4. Options: Select "Once Per Bar Close" 5. Expiration: Set to desired timeframe (default: 60 days) 6. Alert Actions: Enable: * ✓ Notify on App * ✓ Show Popup * ✓ Send Email (optional) * ✓ Play Sound 7. Message: The default message includes: * Ticker symbol * Close price * VWAP value * Confirmation that all filters passed Multi-Symbol Alert To monitor multiple stocks with one alert: 1. In the alert creation dialog, use the Symbol dropdown 2. Select multiple tickers from your watchlist 3. The alert will fire when ANY of those stocks meet the criteria Trading Strategy Based on Andrew Aziz's VWAP Methodology Setup Requirements: * Stock must be "in play" (gap, news, high relative volume from morning scanner) * Price pulls back to VWAP during the trading day * VWAP acts as support for longs (or resistance for shorts) Entry Rules: 1. Wait for price to approach VWAP 2. Confirm VWAP as support with a bullish candle closing above it 3. Enter long on confirmation candle close or next candle open 4. All filters (trend, volume, time) must be green Stop Loss: * Place stop 2-5 cents below VWAP * Adjust based on stock volatility and your risk tolerance Profit Targets: * First target: Previous resistance or swing high * Second target: Daily pivot or Fibonacci extension * Trailing stop: Move stop to breakeven once up 1:1 risk/reward Risk Management: * Risk 1-2% of account per trade * Position size based on distance from stop loss * Aim for 2:1 or 3:1 reward-to-risk ratio Common Scenarios Scenario 1: Clean VWAP Bounce * All filters green ✓ * Price pulls back to VWAP * Green triangle appears * Action: Enter long immediately Scenario 2: Failed Volume * Trend ✓, Time ✓, Near VWAP ✓ * Volume ✗ (red X) * Action: Wait for volume increase or skip trade Scenario 3: Wrong Time Window * All filters green except Time ✗ * Action: If you trade mid-day, consider extending time window in settings Scenario 4: Downtrend * Trend ✗ (EMA 20 < EMA 50) * Action: Skip long entry; consider short setup instead Scenario 5: False Breakout * Light red background appears (filters failed) * Price crossed VWAP but no confirmation * Action: No entry; indicator correctly filtered out weak signal Best Practices 1. Pre-Market Preparation * Run your gappers scanner at 9:00 AM EST * Identify 3-5 stocks "in play" * Add VWAP Long Entry PRO to each chart * Set up alerts for your watchlist 2. Chart Timeframe Selection * 1-minute: Scalping, high-frequency entries (more signals, more noise) * 2-minute: Balanced (recommended for beginners) * 5-minute: Swing entries, fewer but higher-quality signals 3. Combine with Price Action The indicator is a filter and alert system, not a complete strategy. Also consider: * Support/resistance levels * Candlestick patterns (hammer, engulfing) * Overall market trend (SPY, QQQ) * Stock-specific news and catalysts 4. Backtesting * Use TradingView's Bar Replay feature * Review past signals on your favorite stocks * Adjust filter settings based on your results * Document win rate and average R:R 5. Paper Trading First * Test the indicator with paper trading for 1-2 weeks * Track all signals and outcomes * Refine settings before risking real capital Troubleshooting Problem: No Signals Appearing Solutions: * Check if all filters are enabled (they may be too restrictive) * Verify stock has sufficient volume and volatility * Try increasing VWAP proximity from 0.2% to 0.3% * Disable time filter if trading mid-day * Check if stock is actually near VWAP on chart Problem: Too Many Signals Solutions: * Decrease VWAP proximity from 0.2% to 0.1% * Increase volume multiplier from 1.5x to 2.0x * Enable all filters (trend, volume, time) * Use 5-minute chart instead of 1-minute Problem: Filter Status Table Not Visible Solutions: * Scroll chart to right (table is in top right corner) * Check if indicator is loaded (should appear in indicator list on left) * Refresh chart and re-add indicator * Close other overlapping indicators Problem: Alert Not Firing Solutions: * Verify alert is set to "Once Per Bar Close" (not "Only Once") * Check alert hasn't expired * Ensure correct symbols are selected in alert * Confirm indicator is applied to chart with alert Limitations What This Indicator Does NOT Do: * ❌ Automatically enter/exit trades * ❌ Calculate position size * ❌ Account for fundamental news or earnings * ❌ Work on stocks without sufficient liquidity * ❌ Guarantee profitable trades When NOT to Use: * Pre-market or after-hours (VWAP resets at market open) * Low-volume penny stocks (< 100K daily volume) * Stocks without clear trend or catalyst * During major news events or FOMC meetings * First 5 minutes after market open (price discovery phase) Example Trade Walkthrough Stock: XYZ (from morning gappers, +5% gap on earnings)
Time: 10:15 AM EST
Timeframe: 2-minute chart Filter Status Table Shows: * Trend: ✓ (EMA 20 > EMA 50) * Volume: ✓ (2.3x average) * Time: ✓ (within 9:30-11:30 window) * Near VWAP: ✓ (price at $50.05, VWAP at $50.00) * Entry OK: ✗ (waiting for bullish close) Next Candle: * Opens at $50.02 * Drops to $49.98 (testing VWAP) * Closes at $50.08 (bullish candle, above VWAP) * Green triangle appears! * Entry OK: ✓ GO Trade Execution: * Entry: $50.10 (next candle open) * Stop Loss: $49.95 (5 cents below VWAP) * Risk: $0.15 per share * Target 1: $50.40 (previous resistance) = 2:1 R:R * Target 2: $50.70 (daily high) = 4:1 R:R Outcome: * Price rallies to $50.45 * Scale out 50% at Target 1 * Move stop to breakeven ($50.10) * Exit remaining 50% at $50.65 * Result: Profitable trade with 3:1 average R:R Frequently Asked Questions Q: Can I use this for short entries?
A: The current version is for long entries only. For shorts, you'd need to reverse the logic (price rejecting VWAP as resistance, downtrend, etc.). Q: What stocks work best with this indicator?
A: Mid-cap momentum stocks ($1B-$10B market cap), price $10-$100, daily volume > 1M, with a clear catalyst (earnings, news, sector move). Q: Can I trade this on daily or weekly charts?
A: No. VWAP is an intraday indicator that resets each trading day. Use only on intraday timeframes (1m, 2m, 5m, 15m, 30m). Q: Should I take every signal?
A: No. Use the indicator as a filter, not a mechanical system. Consider overall market conditions, stock-specific catalysts, and your own price action analysis. Q: How accurate is this indicator?
A: Accuracy depends on market conditions, stock selection, and your execution. Expect 50-65% win rate with proper 2:1+ risk/reward, similar to Aziz's methodology. Resources * Book: "How to Day Trade for a Living" by Andrew Aziz * VWAP Strategy: Focus on Chapters 7.6 (VWAP Strategy) and supporting examples * Community: Bear Bull Traders (www.bearbulltraders.com) * Practice: Use TradingView's Bar Replay and Paper Trading features Support & Updates For questions, issues, or feature requests, refer to the TradingView script comments or the Bear Bull Traders community. Version: 1.0
Pine Script Version: v6
Last Updated: December 30, 2025 Disclaimer: This indicator is for educational purposes only. Trading involves substantial risk. Past performance does not guarantee future results. Always practice proper risk management and never risk more than you can afford to lose. 1. www.tradingview.com
مؤشر Pine Script®
من ‎DJ_muss7rd‎
SB - HULL MANifty Options Scalping @ 1 Minute TF Call Entry - If both MA turns bullish. Put Entry - If Both MAs turns bearish. Best results - If both MAs complement each other in the same direction. Exit Plan - My opinion, If slow MA turns bearish. However one can also plan to exit if any one of the MA turns bearish. Display - Make your own setting as per your own comfort Keep this indicator in a separate pane below the chart. It will give clarity view of the chart. Works well on nifty derivatives @ 1 minute TF , can do well on other instruments too.
مؤشر Pine Script®
من ‎abhishek5780‎
SB - HULL MANifty Derivatives Scalping @ 1 Minute TF Call Side - If both the MAs turns bullish Put Side - If both the MAs turns bearish. Can be applied on options charts directly. Better to plan 50 points in the money Call or Put option from Spot. Exit - My opinion, if slow MA turns bearish. You can either exit if anyone of the MA turns bearish also. Best for nifty derivatives scalping at 1 Minute TF, can work well on other instruments too. Display Setting - As per your own convenience, Mine snap is below :
مؤشر Pine Script®
من ‎abhishek5780‎
Area per IntervalDescription This indicator shades the area between 2 curves, an SMA and the nearest open/close to the SMA, and their intersections. The black labels with leader lines describe the calculated area of each shaded section, and the total area accumulated per total number of time intervals for that area. The additional value visible in the status line that is not displayed on the chart is, at any bar index (time interval), the current total area of the incomplete shaded area. Usage - The default color of the shaded areas denote the type of momentum being built before the cross. Green for bullish, red for bearish. - The area value of the shaded areas can be used as a capacity indicator, denoting imbalances between the previous and next crosses. - The area per interval value of the shaded areas can be used as a momentum indicator, denoting which area is carrying more price movement before the price crosses. - Similar to indicators that use dynamic price differences between OHLC data, moving averages, etc, confluence with other momentum indicators that use different elements creates additional confirmation. Conclusion Simple momentum indicator. Comment for possible updates that can be made.
مؤشر Pine Script®
من ‎HeavyVisor‎
SB - VWDEMA - V2Derivatives - Scalping @ 1 Minute TF Rules : - CE entry - If ATR a& Dema both turns Green. PE entry - If ATR and Dema both turns Red. If both are in opposite colour code, wait till both align in direction and colour coding. Vwap - If price is above Vwap, Calls will be rewarded well ( Try to find out entry in call options ). If Price is below VWAP, Puts will be rewarded well also, try to figure out entry in Put options. Best results - Nifty derivative @ 1 minute TF , However can work well in all other instruments. Display - make your own settings as per your convenience. Mine is attached below for your reference :
مؤشر Pine Script®
من ‎abhishek5780‎