ابدأ الآن

ابحث في النصوص البرمجية عن "2020年3月人民币兑美元离岸汇率走势"

Machine Learning: Trend Lines [YinYangAlgorithms]Trend lines have always been a key indicator that may help predict many different types of price movements. They have been well known to create different types of formations such as: Pennants, Channels, Flags and Wedges. The type of formation they create is based on how the formation was created and the angle it was created. For instance, if there was a strong price increase and then there is a Wedge where both end points meet, this is considered a Bull Pennant. The formations Trend Lines create may be powerful tools that can help predict current Support and Resistance and also Future Momentum changes. However, not all Trend Lines will create formations, and alone they may stand as strong Support and Resistance locations on the Vertical. The purpose of this Indicator is to apply Machine Learning logic to a Traditional Trend Line Calculation, and therefore allowing a new approach to a modern indicator of high usage. The results of such are quite interesting and goes to show the impacts a simple KNN Machine Learning model can have on Traditional Indicators. Tutorial: There are a few different settings within this Indicator. Many will greatly impact the results and if any are changed, lots will need ‘Fine Tuning’. So let's discuss the main toggles that have great effects and what they do before discussing the lengths. Currently in this example above we have the Indicator at its Default Settings. In this example, you can see how the Trend Lines act as key Support and Resistance locations. Due note, Support and Resistance are a relative term, as is their color. What starts off as Support or Resistance may change when the price crosses over / under them. In the example above we have zoomed in and circled locations that exhibited markers of Support and Resistance along the Trend Lines. These Trend Lines are all created using the Default Settings. As you can see from the example above; just because it is a Green Upwards Trend Line, doesn’t mean it’s a Support Line. Support and Resistance is always shifting on Trend Lines based on the prices location relative to them. We won’t go through all the Formations Trend Lines make, but the example above, we can see the Trend Lines formed a Downward Channel. Channels are when there are two parallel downwards Trend Lines that are at a relatively similar angle. This means that they won’t ever meet. What may happen when the price is within these channels, is it may bounce between the upper and lower bounds. These Channels may drive the price upwards or downwards, depending on if it is in an Upwards or Downwards Channel. If you refer to the example above, you’ll notice that the Trend Lines are formed like traditional Trend Lines. They don’t stem from current Highs and Lows but rather Machine Learning Highs and Lows. More often than not, the Machine Learning approach to Trend Lines cause their start point and angle to be quite different than a Traditional Trend Line. Due to this, it may help predict Support and Resistance locations at are more uncommon and therefore can be quite useful. In the example above we have turned off the toggle in Settings ‘Use Exponential Data Average’. This Settings uses a custom Exponential Data Average of the KNN rather than simply averaging the KNN. By Default it is enabled, but as you can see when it is disabled it may create some pretty strong lasting Trend Lines. This is why we advise you ZOOM OUT AS FAR AS YOU CAN. Trend Lines are only displayed when you’ve zoomed out far enough that their Start Point is visible. As you can see in this example above, there were 3 major Upward Trend Lines created in 2020 that have had a major impact on Support and Resistance Locations within the last year. Lets zoom in and get a closer look. We have zoomed in for this example above, and circled some of the major Support and Resistance locations that these Upward Trend Lines may have had a major impact on. Please note, these Machine Learning Trend Lines aren’t a ‘One Size Fits All’ kind of thing. They are completely customizable within the Settings, so that you can get a tailored experience based on what Pair and Time Frame you are trading on. When any values are changed within the Settings, you’ll likely need to ‘Fine Tune’ the rest of the settings until your desired result is met. By default the modifiable lengths within the Settings are: Machine Learning Length: 50 KNN Length:5 Fast ML Data Length: 5 Slow ML Data Length: 30 For example, let's toggle ‘Use Exponential Data Averages’ back on and change ‘Fast ML Data Length’ from 5 to 20 and ‘Slow ML Data Length’ from 30 to 50. As you can in the example above, all of the lines have changed. Although there are still some strong Support Locations created by the Upwards Trend Lines. We will conclude our Tutorial here. Hopefully you’ve learned how to use Machine Learning Trend Lines and will be able to now see some more unorthodox Support and Resistance locations on the Vertical. Settings: Use Machine Learning Sources: If disabled Traditional Trend line sources (High and Low) will be used rather than Rational Quadratics. Use KNN Distance Sorting: You can disable this if you wish to not have the Machine Learning Data sorted using KNN. If disabled trend line logic will be Traditional. Use Exponential Data Average: This Settings uses a custom Exponential Data Average of the KNN rather than simply averaging the KNN. Machine Learning Length: How strong is our Machine Learning Memory? Please note, when this value is too high the data is almost 'too' much and can lead to poor results. K-Nearest Neighbour (KNN) Length: How many K-Nearest Neighbours are allowed with our Distance Clustering? Please note, too high or too low may lead to poor results. Fast ML Data Length: Fast and Slow speed needs to be adjusted properly to see results. 3/5/7 all seem to work well for Fast. Slow ML Data Length: Fast and Slow speed needs to be adjusted properly to see results. 20 - 50 all seem to work well for Slow. If you have any questions, comments, ideas or concerns please don't hesitate to contact us. HAPPY TRADING!
مؤشر Pine Script®
من ‎YinYangAlgorithms‎
1
Triple Ehlers Market StateClear trend identification is an important aspect of finding the right side to trade, another is getting the best buying/selling price on a pullback, retracement or reversal. Triple Ehlers Market State can do both. Three is always better Ehlers’ original formulation produces bullish, bearish and trendless signals. The indicator presented here gate stages three correlation cycles of adjustable lengths and degree thresholds, displaying a more refined view of bullish, bearish and trendless markets, in a compact and novel way. Stick with the default settings, or experiment with the cycle period and threshold angle of each cycle, then choose whether ‘Recent trend weighting’ is included in candle colouring. John Ehlers is a highly respected trading maths head who may need no introduction here. His idea for Market State was published in TASC June 2020 Traders Tips. The awesome interpretation of Ehlers’ work on which Triple Ehlers Market State’s correlation cycle calculations are based can be found at: DISCLAIMER: None of this is financial advice.
مؤشر Pine Script®
من ‎alphaXiom‎
13
Cycles: 4x dual inputs: Swing / Time Cycles projected forward//Purpose/Premise: To project forward vertical 'cycle' lines based on user-input anchor points, and to search for confluence. The idea being that if several well-anchored cycles agree (i.e. we see multiple bunched vertical line confluence in the future), then this may add support to an already existing trade idea, or may indicate an increased likelihood of a shift in direction. //Usage & notes: ~In the above chart I've anchored to obvious swing lows and swing highs in Btc/Usd from 2020-2022. You could also use fixed time-based cycles from a favored start anchor point. Bars per cycle are printed at the top of each cycle box if your're interested in time cycles. I.e. for 1, 2, 3 month cycles: for BTC you could use 30, 60, 90 bars on daily; for S&P you could use 20, 40, 60 bars on daily. ~On first loading the indicator you will be asked select 'start date', and 'end date' for each of 4 sessions (8x clicks on chart). After this you can easily reset points by clicking the indicator display line three dots>> reset points. Or you can simply drag the vertical box edges (purple lines) to change your cycle anchor points. ~Be sure the start anchor point is before the end anchor point or box/lines won't appear. ~When you drop down to low timeframes you might get bar_index error due to history available: you need then to click the three dots on indicator display line >> reset points >> 8x clicks on the chart. ~Vertical projected lines will match the color of the cycle box they origninate from. ~Lines will project into the future as far as is allowed by tradingview (500 bars max) //Inputs: ~Time start and end dates for each cycle (change these as described above, or input manually) ~Show/hide each cycle (default is show all 4) ~Formatting options: color of forward projected lines, line width, line style, line / box / text color. ~Box transparancy: Set to 100 to make boxes invisible & declutter the chart. Set to 0 for maximum opacity. Default is 80. thanks to @Sathyamurthie for his ideas on cycle confluence which caused me to write this.
مؤشر Pine Script®
من ‎twingall‎
3
SimilarityMeasuresLibrary "SimilarityMeasures" Similarity measures are statistical methods used to quantify the distance between different data sets or strings. There are various types of similarity measures, including those that compare: - data points (SSD, Euclidean, Manhattan, Minkowski, Chebyshev, Correlation, Cosine, Camberra, MAE, MSE, Lorentzian, Intersection, Penrose Shape, Meehl), - strings (Edit(Levenshtein), Lee, Hamming, Jaro), - probability distributions (Mahalanobis, Fidelity, Bhattacharyya, Hellinger), - sets (Kumar Hassebrook, Jaccard, Sorensen, Chi Square). --- These measures are used in various fields such as data analysis, machine learning, and pattern recognition. They help to compare and analyze similarities and differences between different data sets or strings, which can be useful for making predictions, classifications, and decisions. --- References: en.wikipedia.org cran.r-project.org numerics.mathdotnet.com github.com github.com github.com Encyclopedia of Distances, doi.org ssd(p, q)   Sum of squared difference for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Measure of distance that calculates the squared euclidean distance. euclidean(p, q)   Euclidean distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Measure of distance that calculates the straight-line (or Euclidean). manhattan(p, q)   Manhattan distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Measure of absolute differences between both points. minkowski(p, q, p_value)   Minkowsky Distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.      p_value (float) : `float` P value, default=1.0(1: manhatan, 2: euclidean), does not support chebychev.   Returns: Measure of similarity in the normed vector space. chebyshev(p, q)   Chebyshev distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Measure of maximum absolute difference. correlation(p, q)   Correlation distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Measure of maximum absolute difference. cosine(p, q)   Cosine distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Cosine distance between vectors `p` and `q`. --- angiogenesis.dkfz.de camberra(p, q)   Camberra distance for N dimensions.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Weighted measure of absolute differences between both points. mae(p, q)   Mean absolute error is a normalized version of the sum of absolute difference (manhattan).   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Mean absolute error of vectors `p` and `q`. mse(p, q)   Mean squared error is a normalized version of the sum of squared difference.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Mean squared error of vectors `p` and `q`. lorentzian(p, q)   Lorentzian distance between provided vectors.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Lorentzian distance of vectors `p` and `q`. --- angiogenesis.dkfz.de intersection(p, q)   Intersection distance between provided vectors.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Intersection distance of vectors `p` and `q`. --- angiogenesis.dkfz.de penrose(p, q)   Penrose Shape distance between provided vectors.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Penrose shape distance of vectors `p` and `q`. --- angiogenesis.dkfz.de meehl(p, q)   Meehl distance between provided vectors.   Parameters:      p (float ) : `array` Vector with first numeric distribution.      q (float ) : `array` Vector with second numeric distribution.   Returns: Meehl distance of vectors `p` and `q`. --- angiogenesis.dkfz.de edit(x, y)   Edit (aka Levenshtein) distance for indexed strings.   Parameters:      x (int ) : `array` Indexed array.      y (int ) : `array` Indexed array.   Returns: Number of deletions, insertions, or substitutions required to transform source string into target string. --- generated description: The Edit distance is a measure of similarity used to compare two strings. It is defined as the minimum number of operations (insertions, deletions, or substitutions) required to transform one string into another. The operations are performed on the characters of the strings, and the cost of each operation depends on the specific algorithm used. The Edit distance is widely used in various applications such as spell checking, text similarity, and machine translation. It can also be used for other purposes like finding the closest match between two strings or identifying the common prefixes or suffixes between them. --- github.com www.red-gate.com planetcalc.com lee(x, y, dsize)   Distance between two indexed strings of equal length.   Parameters:      x (int ) : `array` Indexed array.      y (int ) : `array` Indexed array.      dsize (int) : `int` Dictionary size.   Returns: Distance between two strings by accounting for dictionary size. --- www.johndcook.com hamming(x, y)   Distance between two indexed strings of equal length.   Parameters:      x (int ) : `array` Indexed array.      y (int ) : `array` Indexed array.   Returns: Length of different components on both sequences. --- en.wikipedia.org jaro(x, y)   Distance between two indexed strings.   Parameters:      x (int ) : `array` Indexed array.      y (int ) : `array` Indexed array.   Returns: Measure of two strings' similarity: the higher the value, the more similar the strings are. The score is normalized such that `0` equates to no similarities and `1` is an exact match. --- rosettacode.org mahalanobis(p, q, VI)   Mahalanobis distance between two vectors with population inverse covariance matrix.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.      VI (matrix) : `matrix` Inverse of the covariance matrix.   Returns: The mahalanobis distance between vectors `p` and `q`. --- people.revoledu.com stat.ethz.ch docs.scipy.org fidelity(p, q)   Fidelity distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Bhattacharyya Coefficient between vectors `p` and `q`. --- en.wikipedia.org bhattacharyya(p, q)   Bhattacharyya distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Bhattacharyya distance between vectors `p` and `q`. --- en.wikipedia.org hellinger(p, q)   Hellinger distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The hellinger distance between vectors `p` and `q`. --- en.wikipedia.org jamesmccaffrey.wordpress.com kumar_hassebrook(p, q)   Kumar Hassebrook distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Kumar Hassebrook distance between vectors `p` and `q`. --- github.com jaccard(p, q)   Jaccard distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Jaccard distance between vectors `p` and `q`. --- github.com sorensen(p, q)   Sorensen distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.   Returns: The Sorensen distance between vectors `p` and `q`. --- people.revoledu.com chi_square(p, q, eps)   Chi Square distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.      eps (float)   Returns: The Chi Square distance between vectors `p` and `q`. --- uw.pressbooks.pub stats.stackexchange.com www.itl.nist.gov kulczynsky(p, q, eps)   Kulczynsky distance between provided vectors.   Parameters:      p (float ) : `array` 1D Vector.      q (float ) : `array` 1D Vector.      eps (float)   Returns: The Kulczynsky distance between vectors `p` and `q`. --- github.com
مكتبة Pine Script®
من ‎RicardoSantos‎
11
Support & Resistance AI (K means/median) [ThinkLogicAI]█ OVERVIEW K-means is a clustering algorithm commonly used in machine learning to group data points into distinct clusters based on their similarities. While K-means is not typically used directly for identifying support and resistance levels in financial markets, it can serve as a tool in a broader analysis approach. Support and resistance levels are price levels in financial markets where the price tends to react or reverse. Support is a level where the price tends to stop falling and might start to rise, while resistance is a level where the price tends to stop rising and might start to fall. Traders and analysts often look for these levels as they can provide insights into potential price movements and trading opportunities. █ BACKGROUND The K-means algorithm has been around since the late 1950s, making it more than six decades old. The algorithm was introduced by Stuart Lloyd in his 1957 research paper "Least squares quantization in PCM" for telecommunications applications. However, it wasn't widely known or recognized until James MacQueen's 1967 paper "Some Methods for Classification and Analysis of Multivariate Observations," where he formalized the algorithm and referred to it as the "K-means" clustering method. So, while K-means has been around for a considerable amount of time, it continues to be a widely used and influential algorithm in the fields of machine learning, data analysis, and pattern recognition due to its simplicity and effectiveness in clustering tasks. █ COMPARE AND CONTRAST SUPPORT AND RESISTANCE METHODS 1) K-means Approach: Cluster Formation: After applying the K-means algorithm to historical price change data and visualizing the resulting clusters, traders can identify distinct regions on the price chart where clusters are formed. Each cluster represents a group of similar price change patterns. Cluster Analysis: Analyze the clusters to identify areas where clusters tend to form. These areas might correspond to regions of price behavior that repeat over time and could be indicative of support and resistance levels. Potential Support and Resistance Levels: Based on the identified areas of cluster formation, traders can consider these regions as potential support and resistance levels. A cluster forming at a specific price level could suggest that this level has been historically significant, causing similar price behavior in the past. Cluster Standard Deviation: In addition to looking at the means (centroids) of the clusters, traders can also calculate the standard deviation of price changes within each cluster. Standard deviation is a measure of the dispersion or volatility of data points around the mean. A higher standard deviation indicates greater price volatility within a cluster. Low Standard Deviation: If a cluster has a low standard deviation, it suggests that prices within that cluster are relatively stable and less likely to exhibit sudden and large price movements. Traders might consider placing tighter stop-loss orders for trades within these clusters. High Standard Deviation: Conversely, if a cluster has a high standard deviation, it indicates greater price volatility within that cluster. Traders might opt for wider stop-loss orders to allow for potential price fluctuations without getting stopped out prematurely. Cluster Density: Each data point is assigned to a cluster so a cluster that is more dense will act more like gravity and 2) Traditional Approach: Trendlines: Draw trendlines connecting significant highs or lows on a price chart to identify potential support and resistance levels. Chart Patterns: Identify chart patterns like double tops, double bottoms, head and shoulders, and triangles that often indicate potential reversal points. Moving Averages: Use moving averages to identify levels where the price might find support or resistance based on the average price over a specific period. Psychological Levels: Identify round numbers or levels that traders often pay attention to, which can act as support and resistance. Previous Highs and Lows: Identify significant previous price highs and lows that might act as support or resistance. The key difference lies in the approach and the foundation of these methods. Traditional methods are based on well-established principles of technical analysis and market psychology, while the K-means approach involves clustering price behavior without necessarily incorporating market sentiment or specific price patterns. It's important to note that while the K-means approach might provide an interesting way to analyze price data, it should be used cautiously and in conjunction with other traditional methods. Financial markets are influenced by a wide range of factors beyond just price behavior, and the effectiveness of any method for identifying support and resistance levels should be thoroughly tested and validated. Additionally, developments in trading strategies and analysis techniques could have occurred since my last update. █ K MEANS ALGORITHM The algorithm for K means is as follows: Initialize cluster centers assign data to clusters based on minimum distance calculate cluster center by taking the average or median of the clusters repeat steps 1-3 until cluster centers stop moving █ LIMITATIONS OF K MEANS There are 3 main limitations of this algorithm: Sensitive to Initializations: K-means is sensitive to the initial placement of centroids. Different initializations can lead to different cluster assignments and final results. Assumption of Equal Sizes and Variances: K-means assumes that clusters have roughly equal sizes and spherical shapes. This may not hold true for all types of data. It can struggle with identifying clusters with uneven densities, sizes, or shapes. Impact of Outliers: K-means is sensitive to outliers, as a single outlier can significantly affect the position of cluster centroids. Outliers can lead to the creation of spurious clusters or distortion of the true cluster structure. █ LIMITATIONS IN APPLICATION OF K MEANS IN TRADING Trading data often exhibits characteristics that can pose challenges when applying indicators and analysis techniques. Here's how the limitations of outliers, varying scales, and unequal variance can impact the use of indicators in trading: Outliers are data points that significantly deviate from the rest of the dataset. In trading, outliers can represent extreme price movements caused by rare events, news, or market anomalies. Outliers can have a significant impact on trading indicators and analyses:    Indicator Distortion: Outliers can skew the calculations of indicators, leading to   misleading signals. For instance, a single extreme price spike could cause indicators like moving averages or RSI (Relative Strength Index) to give false signals.    Risk Management: Outliers can lead to overly aggressive trading decisions if not  properly accounted for. Ignoring outliers might result in unexpected losses or missed opportunities to adjust trading strategies. Different Scales: Trading data often includes multiple indicators with varying units and scales. For example, prices are typically in dollars, volume in units traded, and oscillators have their own scale. Mixing indicators with different scales can complicate analysis:   Normalization: Indicators on different scales need to be normalized or standardized to ensure they contribute equally to the analysis. Failure to do so can lead to one indicator dominating the analysis due to its larger magnitude.   Comparability: Without normalization, it's challenging to directly compare the significance of indicators. Some indicators might have a larger numerical range and could overshadow others. Unequal Variance: Unequal variance in trading data refers to the fact that some indicators might exhibit higher volatility than others. This can impact the interpretation of signals and the performance of trading strategies:   Volatility Adjustment: When combining indicators with varying volatility, it's essential to adjust for their relative volatilities. Failure to do so might lead to overemphasizing or underestimating the importance of certain indicators in the trading strategy.   Risk Assessment: Unequal variance can impact risk assessment. Indicators with higher volatility might lead to riskier trading decisions if not properly taken into account. █ APPLICATION OF THIS INDICATOR This indicator can be used in 2 ways: 1) Make a directional trade: If a trader thinks price will go higher or lower and price is within a cluster zone, The trader can take a position and place a stop on the 1 sd band around the cluster. As one can see below, the trader can go long the green arrow and place a stop on the one standard deviation mark for that cluster below it at the red arrow. using this we can calculate a risk to reward ratio. Calculating risk to reward: targeting a risk reward ratio of 2:1, the trader could clearly make that given that the next resistance area above that in the orange cluster exceeds this risk reward ratio. 2) Take a reversal Trade: We can use cluster centers (support and resistance levels) to go in the opposite direction that price is currently moving in hopes of price forming a pivot and reversing off this level. Similar to the directional trade, we can use the standard deviation of the cluster to place a stop just in case we are wrong. In this example below we can see that shorting on the red arrow and placing a stop at the one standard deviation above this cluster would give us a profitable trade with minimal risk. Using the cluster density table in the upper right informs the trader just how dense the cluster is. Higher density clusters will give a higher likelihood of a pivot forming at these levels and price being rejected and switching direction with a larger move. █ FEATURES & SETTINGS General Settings: Number of clusters: The user can select from 3 to five clusters. A good rule of thumb is that if you are trading intraday, less is more (Think 3 rather than 5). For daily 4 to 5 clusters is good. Cluster Method: To get around the outlier limitation of k means clustering, The median was added. This gives the user the ability to choose either k means or k median clustering. K means is the preferred method if the user things there are no large outliers, and if there appears to be large outliers or it is assumed there are then K medians is preferred. Bars back To train on: This will be the amount of bars to include in the clustering. This number is important so that the user includes bars that are recent but not so far back that they are out of the scope of where price can be. For example the last 2 years we have been in a range on the sp500 so 505 days in this setting would be more relevant than say looking back 5 years ago because price would have to move far to get there. Show SD Bands: Select this to show the 1 standard deviation bands around the support and resistance level or unselect this to just show the support and resistance level by itself. Features: Besides the support and resistance levels and standard deviation bands, this indicator gives a table in the upper right hand corner to show the density of each cluster (support and resistance level) and is color coded to the cluster line on the chart. Higher density clusters mean price has been there previously more than lower density clusters and could mean a higher likelihood of a reversal when price reaches these areas. █ WORKS CITED Victor Sim, "Using K-means Clustering to Create Support and Resistance", 2020, towardsdatascience.com Chris Piech, "K means", stanford.edu █ ACKNOLWEDGMENTS @jdehorty- Thanks for the publish template. It made organizing my thoughts and work alot easier.
مؤشر Pine Script®
من ‎ThinkLogicAI‎
41
BTCUSD Price prediction based on central bank liquidityIn recent months the idea that Bitcoin prices are increasingly linked to liquidity provided by central banks has gained strength. Multiple opinion leaders in the bitcoin space have shared their thoughts to explain why this is happening and why it makes sense. Some of these people I'm talking about are Preston Pysh, Dr. Jeff Ross, Steven McClurg, Lynn Alden among others. The reality is that the correlation between market liquidity, measured as Assets held by the Federal Reserve, Bank of Japan and European Central bank, and Bitcoin prices is high. This made me wonder whether a regression between "market liquidity" and BTCUSD prices made sense in order to understand where Bitcoin prices are in relation to the liquidity in the market. After several trials I ended up fitting a polynomial regression of degree 5 between Market Liquidity and BTCUSD prices since 2013. This regression resulted in r-squared value of 90.93%. I initially visualized the results in python notebooks but then I thought it would be cool to be able to see them in real-time in tradingview. That's where this script comes handy... This script takes the coefficients and intercept from the polynomial regression I built and applies them to the "market_liquidity" index. In addition, it adds upper and lower bound lines to the prediction based on a 95% confidence interval. As you will see, particularly since 2020, the price of bitcoin has rarely been above or below the lines representing the 95% confidence interval. When price has actually crossed these lines it's been in moments where Bitcoin was highly overbought or oversold. Therefore this indicator could be used to understand when it's a good moment to enter or exit the market based on central bank fundamentals. Here's the detailed step-by-step description of what the script does 1) It defines the coefficients obtained from running the regression betweeen "market liquidity" and BTCUSD. Market liquidity is defined as: Market liquidity = FRED:WALCL + FX_IDX:JPYUSD*FRED:JPNASSETS + FX:EURUSD*FRED:ECBASSETSW - FRED:RRPONTSYD - FRED:WTREGEN 2) It defines a scale factor. The reason for this is that coefficients from the regression are very small numbers, given the huge numbers of the value of assets held by central banks. Pinescript doesn't support numbers with many decimals and rounds them to 0, so the coefficients had to be scaled up in order to be able to calculate the regression results. 3) It calculates market liquity with the formula defined above. Market liquidity is calculated in US Dollars. 4) It calculates the predicted BTCUSD price based on the coefficients and the market liquidity values. 5) It scales down the values by the same factor used to scale the coefficients up 6) It defines the standard deviation of the "potential_btcusd_price_scaled" and the actual BTCUSD prices. 7) It defines upper and lower bounds to the BTCUSD price prediction using a z-score of 1.96, which is equivalent to 95% confidence interval. 8) Lastly it plots the BTCUSD price prediction (orange) and the upper (red) and lower(green) confidence intervals. The script can be updated as the correlation of BTCUSD to central bank assets changes (the slope values can be updated). How to use it: When actual BTCUSD price (blue line in the chart) crosses over the red line (upper bound) or crosses under the green line (lower bound) it should be taken as a sign that the price of BTCUSD may be overvalued or undervalued based on the value of assets held by major central banks.
مؤشر Pine Script®
من ‎luca_badoer‎
11
Advanced VWAP_Pullback Strategy_Trend-Template QualifierGeneral Description and Unique Features of this Script Introducing the Advanced VWAP Momentum-Pullback Strategy (long-only) that offers several unique features: 1. Our script/strategy utilizes Mark Minervini's Trend-Template as a qualifier for identifying stocks and other financial securities in confirmed uptrends. Mark Minervini, a 2x US Investment Champion, developed the Trend-Template, which covers eight different and independent characteristics that can be adjusted and optimized in this trend-following strategy to ensure the best results. The strategy will only trigger buy-signals in case the optimized qualifiers are being met. 2. Our strategy is based on the supply/demand balance in the market, making it timeless and effective across all timeframes. Whether you are day trading using 1- or 5-min charts or swing-trading using daily charts, this strategy can be applied and works very well. 3. We have also integrated technical indicators such as the RSI and the MA / VWAP crossover into this strategy to identify low-risk pullback entries in the context of confirmed uptrends. By doing so, the risk profile of this strategy and drawdowns are being reduced to an absolute minimum. Minervini’s Trend-Template and the ‘Stage-Analysis’ of the Markets This strategy is a so-called 'long-only' strategy. This means that we only take long positions, short positions are not considered. The best market environment for such strategies are periods of stable upward trends in the so-called stage 2 - uptrend. In stable upward trends, we increase our market exposure and risk. In sideways markets and downward trends or bear markets, we reduce our exposure very quickly or go 100% to cash and wait for the markets to recover and improve. This allows us to avoid major losses and drawdowns. This simple rule gives us a significant advantage over most undisciplined traders and amateurs!   'The Trend is your Friend'. This is a very old but true quote. What's behind it??? • 98% of stocks made their biggest gains in a Phase 2 upward trend. • If a stock is in a stable uptrend, this is evidence that larger institutions are buying the stock sustainably. • By focusing on stocks that are in a stable uptrend, the chances of profit are significantly increased. • In a stable uptrend, investors know exactly what to expect from further price developments. This makes it possible to locate low-risk entry points. The goal is not to buy at the lowest price – the goal is to buy at the right price! Each stock goes through the same maturity cycle – it starts at stage 1 and ends at stage 4   Stage 1 – Neglect Phase – Consolidation Stage 2 – Progressive Phase – Accumulation Stage 3 – Topping Phase – Distribution Stage 4 – Downtrend – Capitulation This strategy focuses on identifying stocks in confirmed stage 2 uptrends. This in itself gives us an advantage over long-term investors and less professional traders. By focusing on stocks in a stage 2 uptrend, we avoid losses in downtrends (stage 4) or less profitable consolidation phases (stages 1 and 3). We are fully invested and put our money to work for us, and we are fully invested when stocks are in their stage 2 uptrends. But how can we use technical chart analysis to find stocks that are in a stable stage 2 uptrend? Mark Minervini has developed the so-called 'trend template' for this purpose. This is an essential part of our JS-TechTrading pullback strategy. For our watchlists, only those individual values that meet the tough requirements of Minervini's trend template are eligible. The Trend Template • 200d MA increasing over a period of at least 1 month, better 4-5 months or longer • 150d MA above 200d MA • 50d MA above 150d MA and 200d MA • Course above 50d MA, 150d MA and 200d MA • Ideally, the 50d MA is increasing over at least 1 month • Price at least 25% above the 52w low • Price within 25% of 52w high • High relative strength according to IBD. NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available in TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled. This strategy can be applied to all timeframes from 5 min to daily. The VWAP Momentum-Pullback Strategy For the JS-TechTrading VWAP Momentum-Pullback Strategy, only stocks and other financial instruments that meet the selected criteria of Mark Minervini's trend template are recommended for algorithmic trading with this startegy. A further prerequisite for generating a buy signals is that the individual value is in a short-term oversold state (RSI). When the selling pressure is over and the continuation of the uptrend can be confirmed by the MA / VWAP crossover after reaching a price low, a buy signal is issued by this strategy. Stop-loss limits and profit targets can be set variably. You also have the option to make use of the trailing stop exit strategy. Relative Strength Index (RSI) The Relative Strength Index (RSI) is a technical indicator developed by Welles Wilder in 1978. The RSI is used to perform a market value analysis and identify the strength of a trend as well as overbought and oversold conditions. The indicator is calculated on a scale from 0 to 100 and shows how much an asset has risen or fallen relative to its own price in recent periods. The RSI is calculated as the ratio of average profits to average losses over a certain period of time. A high value of the RSI indicates an overbought situation, while a low value indicates an oversold situation. Typically, a value > 70 is considered an overbought threshold and a value < 30 is considered an oversold threshold. A value above 70 signals that a single value may be overvalued and a decrease in price is likely , while a value below 30 signals that a single value may be undervalued and an increase in price is likely. For example, let's say you're watching a stock XYZ. After a prolonged falling movement, the RSI value of this stock has fallen to 26. This means that the stock is oversold and that it is time for a potential recovery. Therefore, a trader might decide to buy this stock in the hope that it will rise again soon. The MA / VWAP Crossover Trading Strategy This strategy combines two popular technical indicators: the Moving Average (MA) and the Volume Weighted Average Price (VWAP). The MA VWAP crossover strategy is used to identify potential trend reversals and entry/exit points in the market. The VWAP is calculated by taking the average price of an asset for a given period, weighted by the volume traded at each price level. The MA, on the other hand, is calculated by taking the average price of an asset over a specified number of periods. When the MA crosses above the VWAP, it suggests that buying pressure is increasing, and it may be a good time to enter a long position. When the MA crosses below the VWAP, it suggests that selling pressure is increasing, and it may be a good time to exit a long position or enter a short position. Traders typically use the MA VWAP crossover strategy in conjunction with other technical indicators and fundamental analysis to make more informed trading decisions. As with any trading strategy, it is important to carefully consider the risks and potential rewards before making any trades. This strategy is applicable to all timeframes and the relevant parameters for the underlying indicators (RSI and MA/VWAP) can be adjusted and optimized as needed. Backtesting Backtesting gives outstanding results on all timeframes and drawdowns can be reduced to a minimum level. In this example, the hourly chart for MCFT has been used. Settings for backtesting are: - Period from Jan 2020 until March 2023 - Starting capital 100k USD - Position size = 25% of equity - 0.01% commission = USD 2.50.- per Trade - Slippage = 2 ticks Other comments - This strategy has been designed to identify the most promising, highest probability entries and trades for each stock or other financial security. - The combination of the Trend-Template and the RSI qualifiers results in a highly selective strategy which only considers the most promising swing-trading entries. As a result, you will normally only find a low number of trades for each stock or other financial security per year in case you apply this strategy for the daily charts. Shorter timeframes will result in a higher number of trades / year. - Consequently, traders need to apply this strategy for a full watchlist rather than just one financial security.
استراتيجية Pine Script®
من ‎JS_TechTrading‎
3
Binance Auto Spot-Futures Premium/Discount -CheThis Script is based in the 2020 @Plumptoiletduck script Special thanks to @tartigradia for the Auto Detect code for the Binance pair. It tells us the difference in price between Spot and Perpetual Futures. Now I incorporated the function that automatically detects the pair we are in to show the premium/discount of that pair. You never need to select the currency you are in the script anymore! It is specially designed for Binance coins, it includes all perpetuals. How to use it? Usually if the Futures are higher than the Spot it indicates that we are in an over exposure zone of longs in futures. If the spot is cheaper than the futures it means that the futures are more fearful. You can use this script with an Open Interest script to get an idea of what is going on. Other examples:
مؤشر Pine Script®
من ‎Che_Trader‎
2
JS-TechTrading: VWAP Momentum_Pullback StrategyGeneral Description and Unique Features of this Script Introducing the VWAP Momentum-Pullback Strategy (long-only) that offers several unique features: 1. Our script/strategy utilizes Mark Minervini's Trend-Template as a qualifier for identifying stocks and other financial securities in confirmed uptrends. NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available on TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled. 2. Our strategy is based on the supply/demand balance in the market, making it timeless and effective across all timeframes. Whether you are day trading using 1- or 5-min charts or swing-trading using daily charts, this strategy can be applied and works very well. 3. We have also integrated technical indicators such as the RSI and the MA / VWAP crossover into this strategy to identify low-risk pullback entries in the context of confirmed uptrends. By doing so, the risk profile of this strategy and drawdowns are being reduced to an absolute minimum. Minervini’s Trend-Template and the ‘Stage-Analysis’ of the Markets This strategy is a so-called 'long-only' strategy. This means that we only take long positions, short positions are not considered. The best market environment for such strategies are periods of stable upward trends in the so-called stage 2 - uptrend. In stable upward trends, we increase our market exposure and risk. In sideways markets and downward trends or bear markets, we reduce our exposure very quickly or go 100% to cash and wait for the markets to recover and improve. This allows us to avoid major losses and drawdowns. This simple rule gives us a significant advantage over most undisciplined traders and amateurs!   'The Trend is your Friend'. This is a very old but true quote. What's behind it??? • 98% of stocks made their biggest gains in a Phase 2 upward trend. • If a stock is in a stable uptrend, this is evidence that larger institutions are buying the stock sustainably. • By focusing on stocks that are in a stable uptrend, the chances of profit are significantly increased. • In a stable uptrend, investors know exactly what to expect from further price developments. This makes it possible to locate low-risk entry points. The goal is not to buy at the lowest price – the goal is to buy at the right price! Each stock goes through the same maturity cycle – it starts at stage 1 and ends at stage 4   Stage 1 – Neglect Phase – Consolidation Stage 2 – Progressive Phase – Accumulation Stage 3 – Topping Phase – Distribution Stage 4 – Downtrend – Capitulation This strategy focuses on identifying stocks in confirmed stage 2 uptrends. This in itself gives us an advantage over long-term investors and less professional traders. By focusing on stocks in a stage 2 uptrend, we avoid losses in downtrends (stage 4) or less profitable consolidation phases (stages 1 and 3). We are fully invested and put our money to work for us, and we are fully invested when stocks are in their stage 2 uptrends. But how can we use technical chart analysis to find stocks that are in a stable stage 2 uptrend? Mark Minervini has developed the so-called 'trend template' for this purpose. This is an essential part of our JS-TechTrading pullback strategy. For our watchlists, only those individual values that meet the tough requirements of Minervini's trend template are eligible. The Trend Template • 200d MA increasing over a period of at least 1 month, better 4-5 months or longer • 150d MA above 200d MA • 50d MA above 150d MA and 200d MA • Course above 50d MA, 150d MA and 200d MA • Ideally, the 50d MA is increasing over at least 1 month • Price at least 25% above the 52w low • Price within 25% of 52w high • High relative strength according to IBD. NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available in TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled. This strategy can be applied to all timeframes from 5 min to daily. The VWAP Momentum-Pullback Strateg y For the JS-TechTrading VWAP Momentum-Pullback Strategy, only stocks and other financial instruments that meet the selected criteria of Mark Minervini's trend template are recommended for algorithmic trading with this startegy. A further prerequisite for generating a buy signals is that the individual value is in a short-term oversold state (RSI). When the selling pressure is over and the continuation of the uptrend can be confirmed by the MA / VWAP crossover after reaching a price low, a buy signal is issued by this strategy. Stop-loss limits and profit targets can be set variably. Relative Strength Index (RSI) The Relative Strength Index (RSI) is a technical indicator developed by Welles Wilder in 1978. The RSI is used to perform a market value analysis and identify the strength of a trend as well as overbought and oversold conditions. The indicator is calculated on a scale from 0 to 100 and shows how much an asset has risen or fallen relative to its own price in recent periods. The RSI is calculated as the ratio of average profits to average losses over a certain period of time. A high value of the RSI indicates an overbought situation, while a low value indicates an oversold situation. Typically, a value > 70 is considered an overbought threshold and a value < 30 is considered an oversold threshold. A value above 70 signals that a single value may be overvalued and a decrease in price is likely , while a value below 30 signals that a single value may be undervalued and an increase in price is likely. For example, let's say you're watching a stock XYZ. After a prolonged falling movement, the RSI value of this stock has fallen to 26. This means that the stock is oversold and that it is time for a potential recovery. Therefore, a trader might decide to buy this stock in the hope that it will rise again soon. The MA / VWAP Crossover Trading Strategy This strategy combines two popular technical indicators: the Moving Average (MA) and the Volume Weighted Average Price (VWAP). The MA VWAP crossover strategy is used to identify potential trend reversals and entry/exit points in the market. The VWAP is calculated by taking the average price of an asset for a given period, weighted by the volume traded at each price level. The MA, on the other hand, is calculated by taking the average price of an asset over a specified number of periods. When the MA crosses above the VWAP, it suggests that buying pressure is increasing, and it may be a good time to enter a long position. When the MA crosses below the VWAP, it suggests that selling pressure is increasing, and it may be a good time to exit a long position or enter a short position. Traders typically use the MA VWAP crossover strategy in conjunction with other technical indicators and fundamental analysis to make more informed trading decisions. As with any trading strategy, it is important to carefully consider the risks and potential rewards before making any trades. This strategy is applicable to all timeframes and the relevant parameters for the underlying indicators (RSI and MA/VWAP) can be adjusted and optimized as needed. Backtesting Backtesting gives outstanding results on all timeframes and drawdowns can be reduced to a minimum level. In this example, the hourly chart for MCFT has been used. Settings for backtesting are: - Period from April 2020 until April 2021 (1 yr) - Starting capital 100k USD - Position size = 25% of equity - 0.01% commission = USD 2.50.- per Trade - Slippage = 2 ticks Other comments • This strategy has been designed to identify the most promising, highest probability entries and trades for each stock or other financial security. • The RSI qualifier is highly selective and filters out the most promising swing-trading entries. As a result, you will normally only find a low number of trades for each stock or other financial security per year in case you apply this strategy for the daily charts. Shorter timeframes will result in a higher number of trades / year. • As a result, traders need to apply this strategy for a full watchlist rather than just one financial security.
استراتيجية Pine Script®
من ‎JS_TechTrading‎
3
Strategy for UT Bot Alerts indicator Using the UT Bot alerts indicator by @QuantNomad, this strategy was designed for showing an example of how this indicator could be used, also, it has the goal to help some people from a group that use to use this indicator for their trading. Under any circumstance I recommend to use it without testing it before in real time. Backtesting context: 2020-02-05 to 2023-02-25 of BTCUSD 4H by Tvc. Commissions: 0.03% for each entry, 0.03% for each exit. Risk per trade: 2.5% of the total account For this strategy, 3 indicators are used: UT Bot Alerts indicator by Quantnomad One Ema of 200 periods for indicate the trend Atr stop loss from Gatherio Trade conditions: For longs: Close price is higher than Atr from UT Bot Ema from UT Bot cross over Atr from UT Bot. This gives us our long signal. Stop loss will be determined by atr stop loss (white point), break even(blue point) by a risk/reward ratio of 0.75:1 and take profit of 3:1 where half position will be closed. This will be showed as buy (open long position) The other half will be closed when close price is lower than Atr and Ema from UT Bot cross under Atr. This will be showed as cl buy (close long position) For shorts: Close price is lower than Atr from UT Bot Ema from UT Bot cross over Atr from UT Bot. This gives us our short signal. Stop loss will be determined by atr stop loss (white point), break even(blue point) by a risk/reward ratio of 0.75:1 and take profit of 3:1 where half position will be closed. This will be showed as sell (open short position) The other half will be closed when close price is higher than Atr and Ema from UT Bot cross over Atr. This will be showed as cl sell (close short position) Risk management For calculate the amount of the position you will use just a small percent of your initial capital for the strategy and you will use the atr stop loss for this. Example: You have 1000 usd and you just want to risk 2,5% of your account, there is a long signal at price of 20,000 usd. The stop loss price from atr stop loss is 19,000. You calculate the distance in percent between 20,000 and 19,000. In this case, that distance would be of 5,0%. Then, you calculate your position by this way: (initial or current capital * risk per trade of your account) / (stop loss distance). Using these values on the formula: (1000*2,5%)/(5,0%) = 500usd. It means, you have to use 500 usd for risking 2.5% of your account. We will use this risk management for apply compound interest. In settings, with position amount calculator, you can enter the amount in usd of your account and the amount in percentage for risking per trade of the account. You will see this value in green color in the upper left corner that shows the amount in usd to use for risking the specific percentage of your account. Script functions Inside of settings, you will find some utilities for display atr stop loss, break evens, positions, signals, indicators, etc. You will find the settings for risk management at the end of the script if you want to change something. But rebember, do not change values from indicators, the idea is to not over optimize the strategy. If you want to change the initial capital for backtest the strategy, go to properties, and also enter the commisions of your exchange and slippage for more realistic results. In risk managment you can find an option called "Use leverage ?", activate this if you want to backtest using leverage, which means that in case of not having enough money for risking the % determined by you of your account using your initial capital, you will use leverage for using the enough amount for risking that % of your acount in a buy position. Otherwise, the amount will be limited by your initial/current capital ---> Do not forget to deactivate Trades on chart option in style settings for a cleaner look of the chart <--- Some things to consider USE UNDER YOUR OWN RISK. PAST RESULTS DO NOT REPRESENT THE FUTURE. DEPENDING OF % ACCOUNT RISK PER TRADE, YOU COULD REQUIRE LEVERAGE FOR OPEN SOME POSITIONS, SO PLEASE, BE CAREFULL AND USE CORRECTLY THE RISK MANAGEMENT Do not forget to change commissions and other parameters related with back testing results! Strategies for trending markets use to have more looses than wins and it takes a long time to get profits, so do not forget to be patient and consistent ! ---> The strategy can still be improved, you can change some parameters depending of the asset and timeframe like risk/reward for taking profits, for break even, also the main parameters of the UT Bot Alerts <----
استراتيجية Pine Script®
من ‎StrategiesForEveryone‎
18
Ehlers Reflex Indicator [CC]The Reflex Indicator was created by John Ehlers (Stocks and Commodities Feb 2020) and this is a zero lag indicator that works similar to an overbought/oversold indicator but with the current stock cycle data. I find that this indicator works well as a leading indicator as well as a divergence indicator. Generally speaking, this indicator indicates a medium to long term downtrend when the indicator is below the line and a medium to long term uptrend when the indicator is above the line. Ehlers has created a few complementary indicators that I will release in the next few days but just keep in mind that this indicator focuses on the underlying cycle component while removing as much noise with no lag. I have color coded the lines to show strong signals with the darker colors and normal signals with the lighter colors. Buy when the line turns green and sell when it turns red. Let me know if there are any other scripts you would like to see me publish!
مؤشر Pine Script®
من ‎cheatcountry‎
5
Trading Day Holidays: 8am reminder of early closing day ahead-Designed for Index Futures(ES,NQ,YM). 8am Visual reminder on the morning of a holiday trading day that trading will cease at 1pm (NY time). -This is updated and stripped down version of @Daveatt's 2020 script: 'BEST USA Bank Holidays Helper'. -Simply marks 'HOLIDAY' on the holiday trading days, at 8am NY time on that day. Past 'HOLIDAY' labels will delete when new ones print. -Should be 9 of these 'half-day' days throughout the year (not including Xmas period) ~I plan to update this each year
مؤشر Pine Script®
من ‎twingall‎
1
Strategy: Range BreakoutWhat? In the price action, levels have a significant role to play. Based on the price moving above/below the levels - the underlying instrument shows some price-action in the direction of breakout/breakdown. There are plenty of ways level can be determined. Levels are the decision point to take a trade or not. But if we make the level derivation complex, then the execution may get hamper. This strategy script, developed in PineScript v5, is our attempt at solving this problem at the core by providing this simple, yet elegant solution to this problem. It's essentially an attempt to Trade Simple by drawing logical (horizontal) lines in the chart and take actions, after multiple associated parameters confirmation, on the breakout / breakdown of the levels. How? Let us explain how we are drawing the levels. We are depending on some of the parameters as described below: Open Range : During intraday movement, often if prices move beyond a particular level, it exibits more movement in the same swing in same direction. We found out, through our back testing for Indian Indices like NSE:NIFTY , NSE:BANKNIFTY or NSE:CNXFINANCE the first 15m (i.e 09:15 AM to 09:30 AM, IST) is one of such range. For Indian stocks, it is 9:15 to 9:45. And for MCX MCX:CRUDEOIL1! it's 5:00 pm to 6:00 pm. There are our first levels. PDHCL : Previous Day High, Close, Low. This is our next level VWAP : The rolling VWAP (volume weighted average price) In the breakout/breakdown of the Open Range and Previous Day High/Low, we are taking the trade decisions as follows using CEST principle: C onditions : If current bar's (say you are in 5m timeframe) closing is broken out the Open Range High or Previous Day High, taken a Buy/Long decision (let's say buying a Call Option CE or selling a Put Option PE or buying the future or cash). If current bar's (say you are in 5m timeframe) closing is broken down the Open Range Low or Previous Day Low, taken a Sell/Short decision (let's say buying a Put Option CE or selling a Call Option PE or selling the future or cash). Additionally, and optionally (default ON, one can turn off): we are checking various other associated multiple confirmations as follows: 1. Momentum : Checking 14-period RSI value is more than 50 or less than 50 (all parameters like period, OB, OS ranges are configurable through settings) 2. Current bar's volume is more than the last 20 bars volume average. How much more - that multiplier is also configurable. (default is 1) 3. The breakout candle is bullish (green) or bearish (red). E ntry : All of these happens only on the closing of the candle . Means: Non Repainting! . Clearly in the chart we are showing as green up arrow BO (breakout for buy) and red down arrow BD (breakdown for sell) to take your decision process smooth. So, on the closing of the decision BO/BD candle we are entering the trade (with a thumping heart and nail biting ...) S top Loss : We are relying on the time tasted (last 40 years) mechanism of Average True Range (ATR) of default 14 period. This default period is also configurable. So for Long trades: the 14 period ATR low band is the SL. For Short trades: the 14 period ATR high band is the SL. T arget : We are depending on the thump rule of 1:2 Risk Reward. It's simple and effective. No fancy thing. We are closing the trade on double the favorable price movement compared to the SL placed. Of course, this RR ratio is confiurable from the settings, as usual. What's Unqiue in it? The utter simplicity of this trading mechanism. No fancy things like complex chart pattern, OI data, multiple candlestick patterns, Order flow analysis etc. Simple level determination, Marking clearly in the chart. Making each parameter configurable in Settings and showing tooltip adjacent to the parameter to make you understand it better for your customization, Wait for the candle close, thus eliminating the chances of repainting menace (as much as possible) Additional momentum and volume check to trade entry confirmation. Works with normal candlestick (nothing special ones like HA ...) Showing everything as a Summary Table (which, again can be turned off optionally) overlaying at the bottom-right corner of the chart, Optionally the Summary Table can be configured to alert you back (say you get it notified in your email or SMS). That way, a single, simple, effective trade setup will ease your journey as smooth sail as possible. Mentions There are plenty of friends from whom time to time we borrowed some of the ideas while working closely together over last one year. From tradingview community, we took the spirit of @zzzcrypto123 awesome work done long back (in 2020) as the indicator "ORB - Opening Range Breakout". (We tried to reach him for his explicit consent, unable to catch hold of him). Some other publicly available materials we have consulted to get the additional checks (like RSI, volume). Lat word Use it please and thank you for your constant patronage in following us in this awesome platform. Let's keep growing together. Disclaimer : This piece of software does not come up with any warrantee or any rights of not changing it over the future course of time. We are not responsible for any trading/investment decision you are taking out of the outcome of this indicator.
استراتيجية Pine Script®
من ‎pradipandsuvra‎
19
Channel Lookback: Average Moving Price (CLAMP)How it works This is a confirmation indicator based on moving averages. It compares the current price to a previous candle N periods ago, then smooths the result. What makes this indicator novel is that it takes the smoothed curve and compares it to the previous value to see whether the slope is increasing or decreasing. Combined with a zero-cross baseline channel, we can compare the relative position of the curve, slope, or closing price to create entry signals. There are several hardcoded conditions that it checks, but this is easily changed. Markets The default values are best used on the SPY daily chart. With backtesting, it seemed to perform fairly well during the last year. It seems to be more accurate during choppy/bear markets, and very inaccurate during a trending market. Eg, if you look at the period of growth that occurred during 2020, it basically said to keep shorting for months at a time. Not good. If you look at other markets (such as gold or uranium), it worked, but only if you inversed what the signal told you to do (eg going long when it says to go short). This is something you will have to test yourself, since every system and market is different. Please don't use this indicator by itself. How to use When combined with other indicators, this tells you whether to go long (green), go short (red), or no trade (gray). It is meant to be used as a confirmation indicator, so it will help verify other trade signals. You can sometimes ignore the first grey circle and reuse the previous colored signal. There are a few markets (such as gold) I noticed this was helpful on; this will depend on your own trade rules and indicator system. If you enable "simple mode" on the settings, it will draw only the final signal (long, short, no signal). I included this because it helps to reduce visual clutter.
مؤشر Pine Script®
من ‎KyleBaran‎
2
Simple SuperTrend Strategy for BTCUSD 4HHello guys!, If you are a swing trader and you are looking for a simple trend strategy, you should check this one. Based in the supertrend indicator, this strategy will help you to catch big movements in BTCUSD 4H and avoid losses as much as possible in consolidated situations of the market This strategy was designed for BTCUSD in 4H timeframe Backtesting context: 2020-01-02 to 2023-01-05 (The strategy has also worked in previous years) Trade conditions: Rules are actually simple, the most important thing is the risk and position management of this strategy For long: Once Supertrend changes from a downtrend to a uptrend, you enter into a long position. The stop loss will be defined by the atr stop loss The first profit will be of 0.75 risk/reward ratio where half position will be closed. When this happens, you move the stop loss to break even. Now, just will be there two situations: Once Supertrend changes from a uptrend to a downtrend, you close the other half of the initial long position. If price goes againts the position, the position will be closed due to breakeven. For short: Once Supertrend changes from a uptrend to a downtrend, you enter into a short position. The stop loss will be defined by the atr stop loss The first profit will be of 0.75 risk/reward ratio where half position will be closed. When this happens, you move the stop loss to break even. Like in the long position, just will be there two situations: Once Supertrend changes from a downtrend to a uptrend, you close the other half of the initial short position. If price goes againts the position, the position will be closed due to breakeven. Risk management For calculate the amount of the position you will use just a small percent of your initial capital for the strategy and you will use the atr stop loss for this. Example: You have 1000 usd and you just want to risk 2,5% of your account, there is a long signal at price of 20,000 usd. The stop loss price from atr stop loss is 19,000. You calculate the distance in percent between 20,000 and 19,000. In this case, that distance would be of 5,0%. Then, you calculate your position by this way: (initial or current capital * risk per trade of your account) / (stop loss distance). Using these values on the formula: (1000*2,5%)/(5,0%) = 500usd. It means, you have to use 500 usd for risking 2.5% of your account. We will use this risk management for apply compound interest. Script functions Inside of settings, you will find some utilities for display atr stop loss, supertrend or positions. You will find the settings for risk management at the end of the script if you want to change something. But rebember, do not change values from indicators, the idea is to not over optimize the strategy. If you want to change the initial capital for backtest the strategy, go to properties, and also enter the commisions of your exchange and slippage for more realistic results. Signals meanings: L for long position. CL for close long position. S for short position. CS for close short position. Tp for take profit (it also appears when the position is closed due to stop loss, this due to the script uses two kind of positions) Exit due to break even or due to stop loss Some things to consider USE UNDER YOUR OWN RISK. PAST RESULTS DO NOT REPRESENT THE FUTURE. DEPENDING OF % ACCOUNT RISK PER TRADE, YOU COULD REQUIRE LEVERAGE FOR OPEN SOME POSITIONS, SO PLEASE, BE CAREFULL AND USE CORRECTLY THE RISK MANAGEMENT The amount of trades closed in the backtest are not exactly the real ones. If you want to know the real ones, go to settings and change % of trade for first take profit to 100 for getting the real ones. In the backtest, the real amount of opened trades was of 194. Indicators used: Supertrend Atr stop loss by garethyeo This is the fist strategy that I publish in tradingview, I will be glad with you for any suggestion, support or advice for future scripts. Do not doubt in make any question you have and if you liked this content, leave a boost. I plan to bring more strategies and useful content for you!
استراتيجية Pine Script®
من ‎StrategiesForEveryone‎
6
Market Crashes/Chart Timeframes HighlightThis extremely helpful indicator allows you to highlight 7 custom date-based timeframes on your charts. The default dates selected are what I consider to be the most significant 7 most recent market declines, including and since the 87 flash crash. Note: The default dates are approximate but good enough to highlight the key timeframes of these pullbacks/crashes/corrections. It's simple to use and does exactly what it should. I created this indicator to make it easier when looking at the overall story of a chart. I found it helpful to highlight these areas to see how a market or equity has responded during these significant market pullbacks. The highlight alone I’ve found helpful, and it becomes more powerful if you combine it with your own trusted trade system. Also, to get the most out of using the default dates it’s important to understand the narrative behind each pullback/crash. Here’s the list of what I consider significant pullbacks: Black Monday - Oct 87 1990s Recession - Jul 90 to Mar 91 Dot Com Bubble - 2000 to 2002 or so Real Estate 2008 Crisis - I choose 2007-2009 to cover full insider knowledge and aftermath 2016 - 2018 - This isn't seen as a pullback, but I have it as significant because in many markets and equities, this was an almost equal percentage pullback as 2008. See Notes below 2020 Crash - Covid-19 and related shenanigans pullback April 2021 to August 2022 - I believe we are in a current SHORT cycle so I've highlighted April 2021 as the start of what might be the start of a major decline testing Dot Com or lower levels. A few notes on the above. You'll find on most of the pullbacks listed above most equities and related markets behave similarly or have similar patterns. The 2016-18 pullback is the most difficult to track. For instance, GE in this timeframe had a -80% decline, whereas BA depending on how you want to measure it had a 50-110% gain.
مؤشر Pine Script®
من ‎RexDogActual‎
Selected Dates Filter by @zeusbottradingWe are presenting you feature for strategies in Pine Script. This function/pine script is about NOT opening trades on selected days. Real usage is for bank holidays or volatile days (PPI, CPI, Interest Rates etc.) in United States and United Kingdom from 2020 to 2030 (10 years of dates of bank holidays in mentioned countries above). Strategy is simple - SMA crossover of two lengts 14 and 28 with close source. In pine script you can see we picked US and GB bank holidays. If you add this into your strategy, your bot will not open trades on those days. You must make it a rule or a condition. We use it as a rule in opening long/short trades. You can also add some of your prefered dates, here is just example of our idea. If you want to add your preffered days you can find them on any site like forexfactory, myfxbook and so on. But don’t forget to add function “time_tradingday ! = YourChoosedDate” as it is writen lower in the pine script. Sometimes the date is substituted for a different day, because the day of the holiday is on Saturday or Sunday. Made with ❤️ for this community. If you have any questions or suggestions, let us know. The script is for informational and educational purposes only. Use of the script does not constitutes professional and/or financial advice. You alone the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold zeusbottrading TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script.
استراتيجية Pine Script®
من ‎zeusbottrading‎
1