ابدأ الآن

ابحث في النصوص البرمجية عن "bands"

VWMA Fibonacci Bands (VFIBs)This is a momentum indicator , utilizing Volume Weighted Moving Averages (VWMAs), Average True Range (ATR), and Fibonacci Levels. This indicator can be used in most, if not all, financial markets. I have personally found it to be most useful in mid or large cap stocks, index funds, and cryptocurrencies in the top 25 by market cap. I have not tested this indicator in Forex markets, but I imagine that it would function well there, too. The idea behind proper use of this indicator centers around mean reversion. If price is low compared to previous price action, mean reversion implies that it is likely to revert back to the mean, over time. If price is high, it implies that it will move lower. Generally, the different period VWMAs (center lines) will act as support when in an uptrend and resistance when in a downtrend. Additionally, it is rare for price to go above the upper bounds or lower bounds of the Fibonacci Bollinger Bands . Price action doing so may indicate a potential short or long position, respectively. This indicator is intended to be used in tandem with the oscillator 'VFIBs Agreement', to be published shortly. As we can see in the chart, the 50 week VWMA has been acting as resistance and recently dipped down to the bottom range of the band, only to bounce back. Holding above the 50 VWMA might indicate a bullish reversal, treating it as support moving forward.
مؤشر Pine Script®
من ‎jpwall‎
HMA w/ SSE-Dynamic EWMA Volatility Bands [Loxx]This indicator is for educational purposes to lay the groundwork for future closed/open source indicators. Some of thee future indicators will employ parameter estimation methods described below, others will require complex solvers such as the Nelder-Mead algorithm on log likelihood estimations to derive optimal parameter values for omega, gamma, alpha, and beta for GARCH(1,1) MLE and other volatility metrics. For our purposes here, we estimate the rolling lambda (λ) value used to calculate EWMA by minimizing of the sum of the squared errors minus the long-run variance--a rolling window of the one year mean of squared log-returns. In practice, practitioners will use a λ equal to a standardized value put out by institutions such as JP Morgan. Even simpler than this, others use a ratio of (per - 1) / (per + 1) to derive λ where per is the lookback period for EWMA. Due to computation limits in Pine, we'll likely not see a true GARCH(1,1) MLE on Pine for quite some time, but future closed source indicators will contain some very interesting industry hacks to get close by employing modifications to EWMA. Enjoy! Exponentially weighted volatility and its relationship to GARCH(1,1) Exponentially weighted volatility--also called exponentially weighted moving average volatility (EWMA)--puts more weight on more recent observations. EWMA is calculated as follows: σ*2 = λσ(n - 1)^2 + (1 − λ)u(n - 1)^2 The estimate, σn, of the volatility for day n (made at the end of day n − 1) is calculated from σn −1 (the estimate that was made at the end of day n − 2 of the volatility for day n − 1) and u^n−1 (the most recent daily percentage change). The EWMA approach has the attractive feature that the data storage requirements are modest. At any given time, we need to remember only the current estimate of the variance rate and the most recent observation on the value of the market variable. When we get a new observation on the value of the market variable, we calculate a new daily percentage change to update our estimate of the variance rate. The old estimate of the variance rate and the old value of the market variable can then be discarded. The EWMA approach is designed to track changes in the volatility. Suppose there is a big move in the market variable on day n − 1 so that u2n−1 is large. This causes our estimate of the current volatility to move upward. The value of λ governs how responsive the estimate of the daily volatility is to the most recent daily percentage change. A low value of λ leads to a great deal of weight being given to the u(n−1)^2 when σn is calculated. In this case, the estimates produced for the volatility on successive days are themselves highly volatile. A high value of λ (i.e., a value close to 1.0) produces estimates of the daily volatility that respond relatively slowly to new information provided by the daily percentage change. The RiskMetrics database, which was originally created by JPMorgan and made publicly available in 1994, used the EWMA model with λ = 0.94 for updating daily volatility estimates. The company found that, across a range of different market variables, this value of λ gives forecasts of the variance rate that come closest to the realized variance rate. In 2006, RiskMetrics switched to using a long memory model. This is a model where the weights assigned to the u(n -i)^2 as i increases decline less fast than in EWMA. GARCH(1,1) Model The EWMA model is a particular case of GARCH(1,1) where γ = 0, α = 1 − λ, and β = λ. The “(1,1)” in GARCH(1,1) indicates that σ^2 is based on the most recent observation of u^2 and the most recent estimate of the variance rate. The more general GARCH(p, q) model calculates σ^2 from the most recent p observations on u2 and the most recent q estimates of the variance rate.7 GARCH(1,1) is by far the most popular of the GARCH models. Setting ω = γVL, the GARCH(1,1) model can also be written: σ(n)^2 = ω + αu(n-1)^2 + βσ(n-1)^2 What this indicator does Calculate log returns log(close/close(1)) Calculates Lambda (λ) dynamically by minimizing the sum of squared errors. I've restricted this to the daily timeframe so as to not bloat the code with additional logic required to derive an annualized EWMA historical volatility metric. After the Lambda is derived, EWMA is calculated one last time and the result is the daily volatility This daily volatility is multiplied by the source and the multiplier +/- the HMA to create the volatility bands Finally, daily volatility is multiplied by the square-root of days per year to derive annualized volatility. Years are trading days for the asset, for most everything but crypto, its 252, for crypto is 365.
مؤشر Pine Script®
من ‎loxx‎
4
BT-Bollinger Bands - Trend FollowingEsse script foi criado para estudo de Backtest. O script usa as Bandas de Bollinger para indicar o início de uma tendência, a entrada é configurada quando o preço abre abaixo e fecha acima da banda superior ou para venda quando o preço abre acima e fecha abaixo da banda inferior. Não há um stop fixo e nem alvo fixo a saída se dá quando o preço toca a média da banda. Você pode usar uma média móvel como filtro combinado com a estratégia. O Script também pode ser usado com algum serviço de bot como 3commas.io , basta colocar as mensagens de entrada e saída para o bot. Autor : Credsonb - Nick: M4TR1X_BR Neste gráfico estou usando as seguintes configurações: Bandas Bollinger: 7 Desvio Padrão: 1.5 Time Frame: 12hs Ticker: ETH This script was created for Backtest study. script uses Bollinger Bands to indicate the start of a trend, entry is set when price opens below and closes above the upper band or for short when price opens above and closes below the lower band. There is no fixed stop and no fixed target, the exit occurs when the price touches the average of the band. You can use a moving average as a filter combined with the strategy. The Script can also be used with some bot service like 3commas. io , just put the input and output messages to the bot. Author : Credsonb - Nick: M4TR1X_BR
استراتيجية Pine Script®
من ‎Credsonb‎
Polynomial Regression Bands w/ Extrapolation of Price [Loxx]Polynomial Regression Bands w/ Extrapolation of Price is a moving average built on Polynomial Regression. This indicator paints both a non-repainting moving average and also a projection forecast based on the Polynomial Regression. I've included 33 source types and 38 moving average types to smooth the price input before it's run through the Polynomial Regression algorithm. This indicator only paints X many bars back so as to increase on screen calculation speed. Make sure to read the tooltips to answer any questions you have. What is Polynomial Regression? In statistics, polynomial regression is a form of regression analysis in which the relationship between the independent variable x and the dependent variable y is modeled as an nth degree polynomial in x. Polynomial regression fits a nonlinear relationship between the value of x and the corresponding conditional mean of y, denoted E(y |x). Although polynomial regression fits a nonlinear model to the data, as a statistical estimation problem it is linear, in the sense that the regression function E(y | x) is linear in the unknown parameters that are estimated from the data. For this reason, polynomial regression is considered to be a special case of multiple linear regression . Related indicators Polynomial-Regression-Fitted Oscillator Polynomial-Regression-Fitted RSI PA-Adaptive Polynomial Regression Fitted Moving Average Poly Cycle Fourier Extrapolator of Price w/ Projection Forecast
مؤشر Pine Script®
من ‎loxx‎
9
Steven Primo's bollinger bands strategyHi, this strategy is taken from a video made by Steven Primo. You can look it up on YouTube if you want to know about it. It is a mean-reversion strategy based on the Bollinger Bands, in which we wait for 5 consecutive closes above the upper band, and for a short-term top. Once it happens, we place an entry order on this top, with a stop at the nearest bottom before the movement started, and use the difference from the stop and entry point to determine the target. For shorting, it's the same process, but for the downside. From my testing, only long orders were profitable, but you can configure whichever you want. It works well for directional markets with a low level of noise, as you can see with the BTCUSD chart. One of its caveats is the short number of occurrences, and the long stop loss and target. You can enable a trailing stop, but from my testings, it just made the results worse. I made some modifications, like removing the MA requirement, since the entry point was above it almost all the time, and I forced the BB to use a log version of the prices, so that discrepancies are eliminated. You'll also notice that you can't select an extension that is lower than 100, and that is intentional, since you're not supposed to enter a trade in which you can lose more than what you can earn. I chose not to implement any kind of risk management, but I might do that in the future. You can leave your suggestions in the comments.
استراتيجية Pine Script®
من ‎EduardoMattje‎
1
Greedy MA & Greedy Bollinger Bands This moving average takes all of the moving averages between 1 and 700 and takes the average of them all. It also takes the min/max average (donchian) of every one of those averages. Also included is Bollinger Bands calculated in the same way. One nice feature I have added is the option to use geometric calculations for. I also added regular bb calculations because this can be a major hog. Use this default setting on 1d or 1w. Enjoy! ps, I call it greedy because the default settings wont work on lower time frames
مؤشر Pine Script®
من ‎The_Peaceful_Lizard‎
7
Accumulation/Distribution Bands & Signals (BTC, 1D, BITSTAMP) This is an accumulation/distribution indicator for BTC/USD (D) based on variations of 1400D and 120D moving averages and logarithmic regression. Yellow plot signals Long Term Accumulation, which is based on 1400D (200W) ALMA, orange plot signals Mid Term Accumulation and is based on 120D ALMA, and finally the red plot signals Long Term Distribution that's based on log regression. It should be noted that for red plot to work BTC 1D BITSTAMP graph must be used, because the function of the logarithmic regression was modified according to the x axis of the BITSTAMP data. Signal bands have different coefficients; long term accumulation (yellow) and and the log regression (red) plots have the highest coefficients and mid term accumulation (orange) has the lowest coefficients. Coefficients are 6x, 3x and 1.5x for the red (sell) and yellow (buy) plots and 1x, 2x and 3x for the orange (buy) plot. Selling coefficient for the yellow and the orange plots are respectively 2x and 1x. Buy and sell signals are summed up accordingly and plotted at the top of the highest band. Acknowledgement: Credits for the logarithmic regression function are due @memotyka9009 and Benjamin Cowen
مؤشر Pine Script®
من ‎spacekadet17‎
8
Bands-Trailing Stop UtilityIntroduction Bands and trailing stops are important indicators in technical analysis, while we could think that both are different they can be in fact closely related, at least in the way they are made. Bands and trailing stops can be made from a simple central tendency estimator, like a moving average, and from a volatility estimator like standard deviation, atr...etc. This is why i propose this utility that allow you to make bands and trailing stops from any indicator in the price chart. How To Use All you have to do is select the indicator you want to make bands from in the settings, so just open the Bands-Trailing Stop Utility indicator settings and select your indicator in "Source". Make sure your source indicator is not in "hide" mode. For example here i'am using a moving average as source for the indicator. Mult control how spread the bands are from each others, by default mult = 1, if we use mult = 2 we get : Mult can be non-integer as well as lower than 1 (when lower than 1 the bands would be closer to each others) Error/Volatility Estimators You can choose from a wide variety of volatility estimators, select the estimator from the "Method" scrolling parameter in settings, by default the indicator will use the running mean absolute error (MAE) which don't use length. Other estimators use length, making length = to the period of the source indicator can help get better results. The root moving averaged squared error (RMASE) is just the square root of the simple moving average of the squared difference between the closing price and the source indicator. length control the period of the moving average of RMASE. You can also use the average true range with period length. It might work better with low lagging moving averages. The range is simply the difference between the highest and lowest over length periods of the source indicator. Stdev is simply the price running standard deviation. Trailing Stop When the trailing stop mode is checked the bands will be replaced by a trailing stop, the trailing stop will still depend on every settings of the indicator like mult/volatility estimator...etc. Conclusion You might find an use to this tool if you want to make bands/trailing stops from pretty much everything. The indicator used as source for the examples is a smooth exponential averager that i could share if i see interest from peoples. Thanks for reading !
مؤشر Pine Script®
من ‎alexgrover‎
10
Balgat EkibiBands are calculated with the std error and variance of the price actions. So if price cross up or cross down the variance bands, you could expect a reversal movement. So if price cross up with the bands and after that there is a reversal candle movement, a short position could be taken. If price cross down to the bands and after that there is a reversal candle movement, a long positon could be taken. All risk management and money management is up to you.
مؤشر Pine Script®
من ‎absoylu‎
3
Pivot-Based Channels & Bands [Misu]█ This Indicator is based on Pivot detection to show bands and channels. The pivot price is similar to a resistance or support level. If the pivot level is breached, the price should continue in that direction. Or the price could reverse at or near this level. █ Usages: Use channels as a support & resistance zone. Use bands as a support & resistance zone. It is also very powerfull to use it as a breakout. Use mid bands & mid channels as a trend direction or trade filter as a more usual moving average. █ Parameters: Show Pivot Bands: show bands. Show Pivot Mid Band: show mid bands. Show Pivot Channels: show channels. Show Pivot Mid Channel: show mid channels. Deviation: deviation used to calculate pivot points. Depth: depth used to calculate pivot points.
مؤشر Pine Script®
من ‎Fontiramisu‎
HL2 Moving Average with BandsThis indicator is designed to assist traders in identifying potential trade entries and exits for S&P 500 (ES) and Nasdaq-100 (NQ) futures. It calculates a Simple Moving Average (SMA) based on the HL2 value (average of high and low prices) of the current candle over a user-defined lookback period (default: 200 periods). The indicator plots this SMA as a blue line, providing a smoothed reference for price trends. Additionally, it includes upper and lower bands calculated as a percentage (default: 0.5%) above and below the SMA, plotted as green and red lines, respectively. These bands act as dynamic thresholds to identify overbought or oversold conditions. The indicator generates trade signals based on price action relative to these bands: Long Entry: A green upward triangle is plotted below the candle when the close crosses above the upper band, signaling a potential buy. Close Long: A red square is plotted above the candle when the close crosses back below the upper band, indicating an exit for the long position. Short Entry: A red downward triangle is plotted above the candle when the close crosses below the lower band, signaling a potential sell. Close Short: A green square is plotted below the candle when the close crosses back above the lower band, indicating an exit for the short position. The script is customizable, allowing users to adjust the SMA length and band percentage to suit their trading style or market conditions. It is plotted as an overlay on the price chart for easy integration with other technical analysis tools. Recommended Time Frame and Settings for Trading S&P 500 and Nasdaq-100 Futures Based on research and market dynamics for S&P 500 (ES) and Nasdaq-100 (NQ) futures, the 5-minute chart is recommended as the optimal time frame for day trading with this indicator. This time frame strikes a balance between capturing intraday trends and filtering out excessive noise, which is critical for futures trading due to their high volatility and leverage. The 5-minute chart aligns well with periods of high liquidity and volatility, such as the U.S. market open (9:30 AM–11:00 AM EST) and the afternoon session (2:00 PM–4:00 PM EST), when institutional traders are most active. Why 5-minute? It allows traders to react to short-term price movements while avoiding the rapid fluctuations of 1-minute charts, which can be prone to false signals in choppy markets. It also provides enough data points to make the SMA and bands meaningful without the lag associated with longer time frames like 15-minute or hourly charts. Recommended Settings SMA Length: Set to 200 periods. This longer lookback period smooths the HL2 data, reducing noise and providing a reliable trend reference for the 5-minute chart. A 200-period SMA helps identify significant trend shifts without being overly sensitive to minor price fluctuations. Band Percentage: 0.5% is more suitable for the volatility of ES and NQ futures on a 5-minute chart, as it generates fewer but higher-probability signals. Wider bands (e.g., 1%) may miss short-term opportunities, while narrower bands (e.g., 0.1%) may produce excessive false signals. Trading Session Recommendations Futures markets for ES and NQ are open nearly 24 hours (Sunday 6:00 PM EST to Friday 5:00 PM EST, with a daily break from 4:00 PM–5:00 PM EST), but not all hours are equally optimal due to varying liquidity and volatility. The best times to trade with this indicator are: U.S. Market Open (9:30 AM–11:00 AM EST): This period is characterized by high volume and volatility, driven by the opening of U.S. equity markets and economic data releases (e.g., 8:30 AM EST reports like CPI or GDP). The indicator’s signals are more reliable during this window due to strong order flow and price momentum. Afternoon Session (2:00 PM–4:00 PM EST): After the lunchtime lull, volume picks up as institutional traders return, and news or FOMC announcements often drive price action. The indicator can capture breakout moves as prices test the upper or lower bands. Pre-Market (7:30 AM–9:30 AM EST): For traders comfortable with lower liquidity, this period can offer opportunities, especially around 8:30 AM EST economic releases. However, use tighter risk management due to wider spreads and potential volatility spikes. Additional Tips Avoid Low-Volume Periods: Steer clear of trading during low-liquidity hours, such as the overnight session (11:00 PM–3:00 AM EST), when spreads widen and price movements can be erratic, leading to false signals from the indicator. Combine with Other Tools: Enhance the indicator’s effectiveness by pairing it with support/resistance levels, Fibonacci retracements, or volume analysis to confirm signals. For example, a long entry signal above the upper band is stronger if it coincides with a breakout above a key resistance level. Risk Management: Given the leverage in futures (e.g., Micro E-mini contracts require ~$1,200 margin for ES), use tight stop-losses (e.g., below the lower band for longs or above the upper band for shorts) to manage risk. Aim for a risk-reward ratio of at least 1:2. Test Settings: Backtest the indicator on a demo account to optimize the SMA length and band percentage for your specific trading style and risk tolerance. Micro E-mini contracts (MES for S&P 500, MNQ for Nasdaq-100) are ideal for testing due to their lower capital requirements. Why These Settings and Time Frame? The 5-minute chart with a 200-period SMA and 0.5% bands is tailored for the volatility and liquidity of ES and NQ futures during peak trading hours. The longer SMA period ensures the indicator captures meaningful trends, while the 0.5% bands are tight enough to signal actionable breakouts but wide enough to avoid excessive whipsaws. Trading during high-volume sessions maximizes the likelihood of valid signals, as institutional participation drives clearer price action. By focusing on these settings and time frames, traders can leverage the indicator to capitalize on the dynamic price movements of S&P 500 and Nasdaq-100 futures while managing the inherent risks of these markets.
مؤشر Pine Script®
من ‎BigGuavaTrading‎
Supertrend BandsSupertrend Bands What is the Supertrend indicator? "The Supertrend indicator is a trend following overlay on your trading chart, much like a moving average, that shows you the current trend direction. The indicator works well in a trending market but can give false signals when a market is trading in a range. It uses the ATR (average true range) as part of its calculation which takes into account the volatility of the market. The ATR is adjusted using the multiplier setting which determines how sensitive the indicator is." "For the basic Supertrend settings, you can adjust period and factor: - The period setting is the lookback for the ATR calculation - Factor is the what the ATR is multiplied by to offset the bands from price" How to use this indicator This indicator is inspired by a strategy I found. It includes four Supertrend indicators, each with different settings that displays trend strength and support/resistance zones. The default settings are optimal for cryptocurrency but do work quite well for traditional also. I highly recommend you try experimenting with different settings, increasing them to suit the instrument. The bands are set from low to high, Band 1 being the fastest and Band 4 being the slowest. Band 4 is the one that sets the overall trend so when price is above Band 4, the trend is bullish and vice versa. Trend is strongest when price is above/below Band 1 and gets weaker as it filters through each band. Band 4 provides the strongest support/resistance and if that breaks the trend flips. In the menu, you will see an option called "Remove Anti Trend?". It is enabled by default and it removes any bearish/resistance bands when the trend is up and any bullish/support bands when the trend is down. When turned off, it will show all Supertrend Bands as they are by default. Bar Colors Bar colors are optional and they reflect the current trend strength based on the Supertrend bands. Alternate ways of using this indicator You could leave everything as default or you can display individual bands. For instance, because I use many overlay indicators, most of the time I turn off all the bands and only show bar colors: You can also turn off Bands 1 and 2 and only show the two slowest lengths: This removes the noise of the two faster Supertrends. Or just show the two fastest bands: Any suggestions to improve this indicator are most welcome :)
مؤشر Pine Script®
من ‎Shanxia‎
10
Auto-Anchored MA with Deviation BandsAuto-Anchored MA with Deviation Bands ✨ Features 📈 Auto-Anchored MA: Calculates moving averages (EMA, SMA, EWMA, WMA, VWAP, TEMA) anchored to user-defined periods (Hour, Day, Week, etc.).📏 Deviation Bands: Plots upper/lower bands using Percentage or Standard Deviation modes for volatility analysis.⚙️ Customizable Timeframes: Choose anchor periods from Hour to Year for flexible trend analysis.🎨 Visuals: Displays MA and bands with gradient fills, customizable colors, and adjustable display bars.⏱️ Countdown Table: Shows bars since the last anchor for easy tracking.🛠️ Smoothing: Applies smoothing to bands for cleaner visuals. 🛠️ How to Use Add to Chart: Apply the indicator on TradingView. Configure Inputs: Anchor Settings: Select anchor period (e.g., Day, Week). MA Settings: Choose MA type (e.g., VWAP, TEMA). Deviation Settings: Set deviation mode (Percentage/Std Dev) and multipliers. Display Settings: Adjust bars to display, colors, and gradient fill. Analyze: View MA, deviation bands, and countdown table on the chart. Track Trends: Use bands as dynamic support/resistance and monitor anchor resets. 🎯 Why Use It? Dynamic Analysis: Auto-anchors MA to key timeframes for adaptive trend tracking. Volatility Insight: Deviation bands highlight potential breakouts or reversals. Customizable: Tailor MA type, timeframe, and visuals to your trading style. User-Friendly: Clear visuals and countdown table simplify analysis. 📝 Notes Ensure sufficient bars for accurate MA and deviation calculations. Gradient fill enhances readability but can be disabled for simplicity. Best used with complementary indicators like RSI or Bollinger Bands for robust strategies. Happy trading! 🚀📈
مؤشر Pine Script®
من ‎AlchimistOfCrypto‎
Bollinger Bands Entry/Exit ThresholdsBollinger Bands Entry/Exit Thresholds Author of enhancements: chuckaschultz Inspired and adapted from the original 'Bollinger Bands Breakout Oscillator' by LuxAlgo Overview Pairs nicely with Contrarian 100 MA The Bollinger Bands Entry/Exit Thresholds is a powerful momentum-based indicator designed to help traders identify potential entry and exit points in trending or breakout markets. By leveraging Bollinger Bands, this indicator quantifies price deviations from the bands to generate bullish and bearish momentum signals, displayed as an oscillator. It includes customizable entry and exit signals based on user-defined thresholds, with visual cues plotted either on the oscillator panel or directly on the price chart. This indicator is ideal for traders looking to capture breakout opportunities or confirm trend strength, with flexible settings to adapt to various markets and trading styles. How It Works The Bollinger Bands Entry/Exit Thresholds calculates two key metrics: Bullish Momentum (Bull): Measures the extent to which the price exceeds the upper Bollinger Band, expressed as a percentage (0–100). Bearish Momentum (Bear): Measures the extent to which the price falls below the lower Bollinger Band, also expressed as a percentage (0–100). The indicator generates: Long Entry Signals: Triggered when the bearish momentum (bear) crosses below a user-defined Long Threshold (default: 40). This suggests weakening bearish pressure, potentially indicating a reversal or breakout to the upside. Exit Signals: Triggered when the bullish momentum (bull) crosses below a user-defined Sell Threshold (default: 80), indicating a potential reduction in bullish momentum and a signal to exit long positions. Signals are visualized as tiny colored dots: Long Entry: Blue dots, plotted either at the bottom of the oscillator or below the price bar (depending on user settings). Exit Signal: White dots, plotted either at the top of the oscillator or above the price bar. Calculation Methodology Bollinger Bands: A user-defined Length (default: 14) is used to calculate an Exponential Moving Average (EMA) of the source price (default: close). Standard deviation is computed over the same length, multiplied by a user-defined Multiplier (default: 1.0). Upper Band = EMA + (Standard Deviation × Multiplier) Lower Band = EMA - (Standard Deviation × Multiplier) Bull and Bear Momentum: For each bar in the lookback period (length), the indicator calculates: Bullish Momentum: The sum of positive deviations of the price above the upper band, normalized by the total absolute deviation from the upper band, scaled to a 0–100 range. Bearish Momentum: The sum of positive deviations of the price below the lower band, normalized by the total absolute deviation from the lower band, scaled to a 0–100 range. Formula: bull = (sum of max(price - upper, 0) / sum of abs(price - upper)) * 100 bear = (sum of max(lower - price, 0) / sum of abs(lower - price)) * 100 Signal Generation: Long Entry: Triggered when bear crosses below the Long Threshold. Exit: Triggered when bull crosses below the Sell Threshold. Settings Length: Lookback period for EMA and standard deviation (default: 14). Multiplier: Multiplier for standard deviation to adjust Bollinger Band width (default: 1.0). Source: Input price data (default: close). Long Threshold: Bearish momentum level below which a long entry signal is generated (default: 40). Sell Threshold: Bullish momentum level below which an exit signal is generated (default: 80). Plot Signals on Main Chart: Option to display entry/exit signals on the price chart instead of the oscillator panel (default: false). Style: Bullish Color: Color for bullish momentum plot (default: #f23645). Bearish Color: Color for bearish momentum plot (default: #089981). Visual Features Bull and Bear Plots: Displayed as colored lines with gradient fills for visual clarity. Midline: Horizontal line at 50 for reference. Threshold Lines: Dashed green line for Long Threshold and dashed red line for Sell Threshold. Signal Dots: Long Entry: Tiny blue dots (below price bar or at oscillator bottom). Exit: Tiny white dots (above price bar or at oscillator top). How to Use Add to Chart: Apply the indicator to your TradingView chart. Adjust Settings: Customize the Length, Multiplier, Long Threshold, and Sell Threshold to suit your trading strategy. Interpret Signals: Enter a long position when a blue dot appears, indicating bearish momentum dropping below the Long Threshold. Exit the long position when a white dot appears, indicating bullish momentum dropping below the Sell Threshold. Toggle Plot Location: Enable Plot Signals on Main Chart to display signals on the price chart for easier integration with price action analysis. Combine with Other Tools: Use alongside other indicators (e.g., trendlines, support/resistance) to confirm signals. Notes This indicator is inspired by LuxAlgo’s Bollinger Bands Breakout Oscillator but has been enhanced with customizable entry/exit thresholds and signal plotting options. Best used in conjunction with other technical analysis tools to filter false signals, especially in choppy or range-bound markets. Adjust the Multiplier to make the Bollinger Bands wider or narrower, affecting the sensitivity of the momentum calculations. Disclaimer This indicator is provided for educational and informational purposes only.
مؤشر Pine Script®
من ‎chuckaschultz‎