ابدأ الآن

ابحث في النصوص البرمجية عن "scalping"

WMA combined with Barcolor VTRENDThis script centers around a weighted moving average band, to show price action when its in a bull or bear trend. Included for trend purposes are two volume weighted moving averages, a 99 and 500 length respectively. Above the weighted moving average band, barcolor is green and below it is red. We also have key open levels, the daily, weekly, monthly and yearly. The candle colors are different when it closes above or below the daily open, purple for above and maroon for below. I have also have taken the liberty of putting crosses on chart for when this happens too, as to help identify the direction of price action more easily. I recommend using the 1hr timeframe for most trades, the open and close crosses can be noisy at low timeframes, 15 - 30 minutes is good enough for low timeframe scalping.
مؤشر Pine Script®
من ‎vtrend-script‎
RSI Local TrendA simple indicator using two RSIs. Conditions for buy: RSI(slow) < RSI(fast) and RSI(slow) < long_trigger Conditions for sell: RSI(slow) > RSI(fast) and RSI(slow) > short_trigger It is recommended to use in small timeframes for scalping. Recommended settings: slow = 3 fast = 14 long_trigger = 30 short_trigger = 70 In markets where there is very high volatility, it is recommended to change the trigger parameters: long_trigger = 20 short_trigger = 80
مؤشر Pine Script®
من ‎azathatamow‎
5
VIX Volatility Trend Analysis With Signals - Stocks OnlyVIX VOLATILITY TREND ANALYSIS CLOUD WITH BULLISH & BEARISH SIGNALS - STOCKS ONLY This indicator is a visual aid that shows you the bullish or bearish trend of VIX market volatility so you can see the VIX trend without switching charts. When volatility goes up, most stocks go down and vice versa. When the cloud turns green, it is a bullish sign. When the cloud turns red, it is a bearish sign. This indicator is meant for stocks with a lot of price action and volatility, so for best results, use it on charts that move similar to the S&P 500 or other similar charts. This indicator uses real time data from the stock market overall, so it should only be used on stocks and will only give a few signals during after hours. It does work ok for crypto, but will not give signals when the US stock market is closed. **HOW TO USE** When the VIX Volatility Index trend changes direction, it will give a green or red line on the chart depending on which way the VIX is now trending. The cloud will also change color depending on which way the VIX is trending. Use this to determine overall market volatility and place trades in the direction that the indicator is showing. Do not use this by itself as sometimes markets won’t react perfectly to the overall market volatility. It should only be used as a secondary confirmation in your trading/trend analysis. For more signals with earlier entries, go into settings and reduce the number. 10-100 is best for scalping. For less signals with later entries, change the number to a higher value. Use 100-500 for swing trades. Can go higher for long swing trades. Our favorite settings are 20, 60, 100, 500 and 1000. ***MARKETS*** This indicator should only be used on the US stock markets as signals are given based on the VIX volatility index which measures volatility of the US Stock Markets. ***TIMEFRAMES*** This indicator works on all time frames, but after hours will not change much at all due to the markets being closed. **INVERSE CHARTS** If you are using this on an inverse ETF and the signals are showing backwards, please comment with what chart it is and I will configure the indicator to give the correct signals. I have included over 50 inverse ETFs into the code to show the correct signals on inverse charts, but I'm sure there are some that I have missed so feel free to let me know and I will update the script with the requested tickers. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Auto Fibonacci, Directional Movement Index, Volume Profile with buy & sell pressure, Auto Support And Resistance, Vix Scalper and Money Flow Index in combination with this Vix Trend Analysis. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
مؤشر Pine Script®
من ‎FriendOfTheTrend‎
3
Volatility indicator based on ATR Hello, I'm sharing to you a volatility indicator I've done in the last few weeks based on ATR. There is multiple functionalities on this indicator, the first one is an overlay displaying when an asset is in an "overvolatily zone" (displayed with red cross) and when we are in an "undervolatily zone" (displayed with green cross). You can change the sensibility of the signals in the parameters if you wish to have more or less greedy signals (it will only modify the overvolatility signals). By the way those signals are not working for week-ends because volatility works differently on week-ends and it's not a good idea to count week-ends in the calculations, so do not worry if you see no signals on weekends. Second part of the indicator is something I called "Atr bands" it's an equivalent to the famous Bollinger-Bands but based on ATR. I haven't backtested them yet but they seems really interesting in low ut (15 mins seems to be the best ut for those) and they seems pretty bad in high ut so they can maybe be useful for low ut scalping. Last thing, there is a parameter allowing you to display bands on the week-ends so you can easily see where the indicator won't give signals. I would be really happy if I could have some feedsback if you try the indicator :) Have a wonderful day
مؤشر Pine Script®
من ‎JuicY-trading‎
Pumpkin Soup Modified Indicator[Early bird]This trading strategy is a multi-divergence trading technique using central oscillators such as MACD, SMI, Stochastic, and RSI and MAs (EMA, SMA, WMA) and channels (Donchian). Only the parts that can be disclosed based on personal sales strategies can be used. ※ Raise it from the previously posted strategic indicator to the alarm indicator. - You can measure the size of the weight with the rainbow color of the arrow, and the alarm is made of a single alarm. I recommend a 3-hour stick to 12-hour stick for usage. The MACD ma part is the sensitivity part of the signal, so please use it if necessary. ///옵션 Middle value (Support Resistance): It represents the sales base of the stock bar where long and short occur, starting from the peak where diversity occurs. -Red and green lines represent resistance and support, and yellow and blue lines represent short-term sections used for scalping. ※ inverval : It's a part that adjusts sensitivity and you can apply it according to the time of use. MA was used by integrating the MA series in combination. -The required length of MA is 5 pieces, and I wrote the length I use. ※ This strategy was used to raise it to a single alarm indicator before raising it to an invitation-only indicator. Reference CM_Donchian Channels Modified_V2 With Alert Capability by ChrisMoody ~ We applied the range in front of the stock bar to create the section necessary to adjust the leverage. ------------------------------------------------------------------------------------ 이 매매 전략은 MACD, SMI, Stochastic, RSI 등 센터드 오실레이터와 MAs(EMA, SMA, WMA)와 채널(돈치안)을 이용한 다중 다이버전스 매매기법입니다. 개인적인 매매전략을 근본으로 공개할 수 있는 부분만 사용할 수 있게 올립니다. ※ 기존에 올렸던 전략지표에서 알람지표로 다시 올립니다. - 화살표의 무지개 색상으로 비중의 크기를 가늠할 수 있으며 알람은 단일 알람으로 제작되었습니다. 사용시간대는 3시간봉에서 12시간봉대를 추천드립니다. MACD ma 부분은 시그널상 민감도부분으로 필요시 사용하시길 바랍니다. ///옵션 Middle value(Support Resistance) : 다이버전스가 생기는 봉을 기점으로 롱과 숏이 발생하는 주가봉의 매물대를 나타냅니다. 빨간선과 초록선은 저항과 지지를 나타내며, 노란선과 파란선은 스캘핑용으로 사용되는 단기 구간을 나타냅니다. ※ inverval : 민감도 조절하는 부분으로 사용시간대에 맞게 적용하시면 됩니다. MA는 MA계열을 복합적으로 통합하여 사용하였습니다. 필요한 MA의 길이는 5개정도로 제가 사용하는 길이로 작성하였습니다. ※본 전략은 초대전용 지표로 올리기전 단일 알람 지표로 올리는 용도로 사용되었습니다. ※ 전략지표 매매 포인트에서 매매 물타기 불타기 적용 참고 CM_Donchian Channels Modified_V2 With Alert Capability by ChrisMoody ~ 주가봉 앞의 범위를 적용하여 레버리지 조절하는데 필요한 구간을 만들었습니다.
مؤشر Pine Script®
من ‎Pumpkin_Soup‎
2
Volatility CheckerWhenever we want to find out volatility of the current chart, we need to visit screener and check the latest percentage. Because of this frustration by visiting screener page, I made this script. And there is no script like this, so it's open and free to use. This script is detect current percentage of volatility as indicator way. Screener show default 1D volatility. But this script is not only show 1D volatility. You can change the resolution whatever you like. And you can switch more resolution style. But I think, 1D resolution is better. This script is best for crypto investors. I've no idea about stock/forex, so hmmmmm. Hline helps you to detect the position of the volatility. I always like to check those symbol which is less than 30. Because it's best for scalping. Less than 10 is best for swing traders. Feel free to use. Any feedback? welcome to comment zone :)
مؤشر Pine Script®
من ‎samiulgg‎
1
Bollinger bands and Keltner bands █ OVERVIEW This is a Bollinger band Script, with Keltner Channel Bands and for scalping. █ CONCEPTS 1 — Bollinger Bands, The Bollinger band component is make out from two part, the standard component represented by a white cloud. This is the 2nd deviation and 3rd deviation filled. The second part linear weight This is the 2nd deviation, and is filled from the 3rd deviation from the standard bands. This give the effect of cutting in and out to proved a support and resistance cloud. 2 — Keltner bands, this is the normal calculation, nothing special, by default this is off and can be turned back on in styles. 3 Deviations with ALMA as the Basis 3 — Non-traditional basis Like with you can change the base moving average but to a lesser extent. option are: sma = Simple Moving Average ema = Exponential Moving Average wma = Weighted Moving Average vwma = Volume Weighted Moving Average rma = Running Moving Average alma = Arnaud Legoux Moving Average hma = Hull Moving Average █ OTHER SECTIONS  • LIMITATIONS: again this is base on moving average so there is a lag factor, the cloud do not work without volume so if the indicator can not pull volume data you are left with the standard bands.  • NOTE this is a trimmed version of still functions the same.  • THANKS: rumpypumpydumpy for the inspiration
مؤشر Pine Script®
من ‎Rain5369‎
2
Godson CandleScript Symposium This script is a party of every useful trading indicator i believe in. The primary signals are candlescript analyses in order of most useful CBE: Complete Bullish/Bearish Engulfing DF/GD: These are Dragonfly and Gravestone Doji's but they also signal Harami's BE: Bullish/Bearish Engulfing H: Actual Harami's (these are mean't to be pre-emptive Hedge signals) D: basic Dojis these are also two Moving Averages 1Hr ema and 1D ema doesn't have to be 1Hr/1D but that's the default. you have 3 choices A: show all signals B: only show counter signals(these are bullish signals in a bear market; as defined by price under 1D, and vice versa), this exists for picking bottoms or counter-trend scalping. C: only show pro trend signals(the trend is your fren... as they say) only signals that appear 3% away from the mean(1hr ema) are shown, you can change this. there are also signals that are meant for buying dips and selling rips, these appear when the price action significantly increases the STDEV and the price is far from the mean. these settings can also be changed green X: Local Bottom red X: Locap top candlecolor if turned on changes the color of the candle when Heiken Ashi open is the High(red) or low(green) if you want your charts to look exactly like mine, turn off candle body, change wick colors to white and make background gridline 100% transparent.
مؤشر Pine Script®
من ‎Godson_Mansa‎
3
High Low Open Mid Ranges & Levels (Multi-Timeframe)This indicator automatically plots the chosen timeframe's high, low, mid point and open. These levels on higher timeframes act as support and resistance levels on lower timeframes, helping find entries, stoploss and profit targets. Most common timeframes to choose are Daily, 1W, 1M, and 3M. Other timeframes that are good include, 2D, 2W and 2M. For example, you can see in the snapshot below, we are on the 4hr TF showing those levels from the 2W. This historical 2W zone (open and mid) was (and currently still is) resistance. You can see it also provided a good entry to go short. This is also useful for intraday scalping. Below, we are on the 15min TF with levels set on the 2D timeframe. You can see how the Open and Mid levels acted as resistance, providing good entries on range trades, with take profit set at the previous 2D low. There is also a table which tells you all the main TFs high, low, open, and mid levels. They are the most important ones to look out for. This indicator should not be used in isolation; it is best to pair it up with other TA such as orderblocks, S/D zones, S&R or overlay indicators.
مؤشر Pine Script®
من ‎Shanxia‎
24
CCT ScalperThis indicator composes of 4 scalping lines, which works great for scalping, short-term day trading and swing trading. What it does. This is a simple scalping strategy based on rejection. Buy and Sell scalp entries are given when the market rejects off the CCT Scalper indicator. Consolidation signals are also present when there is no trend. How it does it. These Scalper lines have been adjusted to work best with the CCT Entry Bar indicator. It calculates rejection and entries after our Entry Bar confirms the current trend. How to use it. It is extremely important to use the CCT Scalper indicator together with the CCT Entry Bar Indicator. The CCT Scalper entry strategy is applied when buy and sell rejection signals are present. Only Buy scalps when the CCT Entry Bar shows bullish momentum. Only Sell scalps when the CCT Entry Bar shows bearish momentum. To access this indicator use the link below.
مؤشر Pine Script®
من ‎petrolhead71‎
Price ActionFirst, you have to know price action, RTM price action Handbook could help you this indicator shows you base and momentum candles base candles could be zones of trade that show you fighting of bulls and bears, and momentum candles could show the power of those zones. Base candles are white in the chart, and you can place your order at the good zone. Rally candles and drop candles are momentum candles, and bold rally and bold drop show that it is more powerful than its before candle. Zigzag compression is one way that shows the compression in trend. it looks like the Wedges pattern at classic technical that shows pending orders are closed, so the target zone could be powerful to reverse the trend. Black background of candle means that candle doesn't reach its before candle and so it is poor candle, I named it domination. It is better to do not trade at poor candles. At the end, I find Price action the best way to trade, and it makes you free of other indicator, even volume indicator. This indicator is good for those who use price action strategy to trade and those who want to learn the price action. It could be so helpful and reliable way to find the zones, and place buy or sell order and the target, specially for scalping.
مؤشر Pine Script®
من ‎erfan_abedi‎
64
DyorTool OscillatorWhat is the DyorTool Suite? It is a toolkit that helps the trader to trade the market emotionless, under any condition. This package is made of 3 scripts : DyorTool Premium DyorTool Oscillator DyorTool Dashboard What indicators are in these scripts? DyorTool Premium DyorTool Algo which gives buy and sell signals : 4 setups. The stats shown in the picture is set with a leverage of 0.4 on each trade with the commission of Binance ( without reduction ). Range : 4 setups Ribbon : 4 setups Aggressiv Scalping : Trend Following - low UT : 2 setups EVWMA : 4 setups Ping Pong scalping : 4 setups Support Line : 4 setups DyorTool Oscillator DyorTool RSI : 8 setups DyorTool Oscillator : 8 setups Smart candle color : Filter noise of the market DyorTool Dashboard Allows the user to feel the market sentiment with a custom candle Measure the volatility of the market Show DyorTool Algo trend Show the momentum trend and measure his evolution. Smart Stop Loss and Leverage calculation in order to not get in a trade if you are late, or to protect your capital. All these indicators allow users to : Trade the market easier, within a clearly defined framework - range. Detect macro trend and the nearby momentum Get early in a trade by entering in a trade with one of the 42 setups explained. Have realistic target profit Protect your capital with a smart stop loss and calculate the leverage for a defined stop loss Detect if the market is with or against you so you are not holding more than you should. This package is unique in its kind and it is complete. You can either do scalping or day-trading with it. There are many different indicators in it. And a formation is given to explain in detail each indicator. This formation is easy to understand. As you saw, each indicator has its own setups. These setups are explained one by one, under what condition you can enter in a trade, how to do it, where to exit, what to understand about the market next. There is no interpretation possible. You are either in a setup or in a waiting zone. These indicators are self-sufficient. You don't have to use all of them, and not at the same time. You use the ones which fit you better.
مؤشر Pine Script®
من ‎DyorTool‎
DyorTool DashboardWhat is the DyorTool Suite? It is a toolkit that helps the trader to trade the market emotionless, under any condition. This package is made of 3 scripts : DyorTool Premium DyorTool Oscillator DyorTool Dashboard What indicators are in these scripts? DyorTool Premium DyorTool Algo which gives buy and sell signals : 4 setups. The stats shown in the picture is set with a leverage of 0.4 on each trade with the commission of Binance ( without reduction ). Range : 4 setups Ribbon : 4 setups Aggressiv Scalping : Trend Following - low UT : 2 setups EVWMA : 4 setups Ping Pong scalping : 4 setups Support Line : 4 setups DyorTool Oscillator DyorTool RSI : 8 setups DyorTool Oscillator : 8 setups Smart candle color : Filter noise of the market DyorTool Dashboard Allows the user to feel the market sentiment with a custom candle Measure the volatility of the market Show DyorTool Algo trend Show the momentum trend and measure his evolution. Smart Stop Loss and Leverage calculation in order to not get in a trade if you are late, or to protect your capital. All these indicators allow users to : Trade the market easier, within a clearly defined framework - range. Detect macro trend and the nearby momentum Get early in a trade by entering in a trade with one of the 42 setups explained. Have realistic target profit Protect your capital with a smart stop loss and calculate the leverage for a defined stop loss Detect if the market is with or against you so you are not holding more than you should. This package is unique in its kind and it is complete. You can either do scalping or day-trading with it. There are many different indicators in it. And a formation is given to explain in detail each indicator. This formation is easy to understand. As you saw, each indicator has its own setups. These setups are explained one by one, under what condition you can enter in a trade, how to do it, where to exit, what to understand about the market next. There is no interpretation possible. You are either in a setup or in a waiting zone. These indicators are self-sufficient. You don't have to use all of them, and not at the same time. You use the ones which fit you better.
مؤشر Pine Script®
من ‎DyorTool‎
3
FieryTrading Suite AThis trading suite offers a complete package to traders, both long- and short-term. The idea here is that by combining FieryTrading Suite A and B, one can get a better grip on the markets, thus making more profitable trades. This trading suite is suited for all time frames and assets. Ideally one would combine this trading suite with their own strategies or indicators. This indicator pack consists of several parts and offers quite some customization. // FieryTrading Suite A Bar Trend: the bars will get colored according to the current, short-term, trend. Green is bullish, red is bearish and yellow is neutral. By tweaking the Bar Trend Length one can make the bar trend more or less responsive. Higher lengths are better for long term trading, whereas a shorter length is better for short-term or scalping. MTF EMA: this is actually two indicators in one. First, we have the EMA on the chart, which is a general current trend indicator. Above the EMA means bullish, under the EMA means bearish. This EMA is also colored according to the long-term trend, which gets pulled from a higher time-frame. Green means long term bullish, red long-term bearish, yellow neutral. Overshoot Area: the green and red bands around the price are areas where the price might potentially reverse from. This works exceptionally well in consolidating (horizontal) markets. The wider the overshoot area, the stronger the trend. A very tight overshoot area might indicate that the price will soon make a strong move. Increase the overshoot length to make it better suited for long-term. Decrease the length for better detection of small moves. Extra’s: 1) Extreme bars: when turned on, the bars will color blue if the price reaches a potential strong area of reversal or consolidation. Blue bars are also great areas to exit your current position. Increase the Extreme Multiplier in case you want it less responsive. Decrease the multiplier to quicker spot extreme bars, but with a higher margin of error. 2) FieryTrend: due to its popularity, I’ve decided to included my FieryTrend indicator in the Trading Suite. It’s a great tool to manually find trend lines, resistances and supports. See my FieryTrend indicator for more info. 3) Fractals: when turned on, this option will display fractals on the chart. These fractals are mainly used for stop-loss determination, but can be used for other strategies as well. 4) FT B Reversal: when turned on, this will place reversals of the FieryTrend Suit B on the chart. Make sure to keep the inputs of the FT B indicator the same on both the A and B suite. It might trigger some false-positives, don’t trade this blindly. Wait for the lighter color to completely disappear behind the darker one on FT B. Alerts: Alerts can be created for Extreme Bars, Bar Trend and FieryTrading Suite B Reversals. Bar trend currently triggers an alert of every bullish / bearish bar, want to make it trigger once in the future, but I’m encountering an unknown bug. // FieryTrading Suite B This oscillator tries to give traders an idea of the current trend, as well as trend reversals. The higher the lengths, the bigger the potential trends can become. Be aware that higher lengths are less responsive to market movements. The default inputs are best for most traders. Alerts for this indicator can be made in the FT Trading Suite A, indicated by the blue up / down triangles. // Potential strategies There are several potential strategies that one can follow by just looking at the chart. Here are some examples: 1.0 For longer term trades one could simply trade the bar colors. Buy when the bar goes green, sell when it goes red. 1.1 You could exit the trade at either an Extreme Bar or when the price enters the Overshoot Area 1.2 During bullish trends (green bars, green MTF EMA), you could spot potential entries with the FieryTrading Suite B. Enter on every dip on the oscillator. Inverse would be true for shorts. 2.0 You could trade the FT B Reversals during their respective trend. So, trade bearish reversals during a red MTF EMA, bullish reversals during a green MTF EMA. Never trade one indicator naked. Always use other indicators to confirm your bias. For take-profit and stop-loss selection I would generally advise to look at the most recent fractal and place the stop above / below the fractal bar. Bullish trades should look at the pink fractal, bearish trades at the yellow fractal. When no fractal is available, look at the reversal bar and apply the same strategy. For short term trades I’d advise a risk-reward of 1.5, longer term 2 – 2.5. See the screenshots below for a couple of examples. For access, please take a look at the "Author's Instructions" below.
مؤشر Pine Script®
من ‎FieryTrading‎
2
Dump Detector - Stochastic RSIDump Detecter uses Stochastic RSI to detect dumps/downtrends. Can be used as an exit trigger for long bots or an entry trigger for short bots. Change settings to lower timeframe for scalping. Pump signals can be turned on with tickbox. Default Settings are not the usual Stochastic RSI setup and have been tuned to bitcoin 3hr chart: Timeframe = 3hrs smoothK = 3 smoothD = 3 lengthRSI = 6 lengthStoch = 27 src = close
مؤشر Pine Script®
من ‎veryfid‎
12
Quantum RenkoIf you are a more experienced trader, you might have come across the word “renko” or have seen it in trading forums and communities. It refers to a Japanese charting technique that is extremely popular among traders because of the particular way it plots price action. And it does this by removing time, and in effect focuses on price action delivering smooth trends and clear congestion phases. More importantly however it reveals momentum since it is independent of time and so as the market speeds up, so does the chart, and vice versa. This is a concept you would not see in a normal time-based chart. Each bar is created when the price exceeds the previous bar’s high or low by a predefined amount or what we call the box size or brick size. This gives the renko chart a pleasant appearance of equally sized bars running up or down in 45-degree angles. This delivers some great advantages. First, it allows traders to focus solely on price as the chart filters out all minor price fluctuations and market “noise”. This makes it easier for traders not only to identify strong moves but also to spot significant turning points, and so deploy smarter entries and exits. Second, a renko chart helps traders in what is probably one of the most difficult aspects of trading, namely staying in a position once a move is underway. The renko chart does this by displaying price momentum as it speeds up and slows down and it does this because a renko chart is devoid of time. Finally, because the bricks are drawn at 45-degree angles from each other, the charts are easier to read and to analyze. Unfortunately, on TradingView the renko chart is extremely limited for free users and the Quantum Renko indicator offers a great solution with some exciting new features. Dual Mode You can use the Quantum Renko indicator for TradingView in 2 different ways. Standard When applied, the Quantum Renko indicator appears below the main chart and creates a renko chart representation of the time-based chart above. Please note that in Standard mode, and since renko charts are devoid of time, the time x-axis of the chart does not apply to the renko chart displayed. Right off the bat, the Dynamic Renko indicator takes the time-based chart above and calculates the best box size that matches the current timeframe then uses it to create the renko bars below. The computed box size is displayed at the right-hand side of the renko chart’s last bar. It can also accept a fixed box size by entering it in the indicator’s Fixed Box Size input. Time-accurate The renko chart is a powerful approach to adopt as an intra-day trader, as it smooths out the price action into a series of blocks or steps, and so delivers a uniform chart which is easy to analyse. And of course, being a non time-based chart, it reveals momentum as the price action speeds up and slows down which is invaluable when scalping. However, there is a problem. As it is a non time-based chart it can be tricky to align this with a time based chart as the two are not synchronised. So, where a trader is running the renko alongside a time-based chart using one to analyse the other and vice versa, it is almost impossible to align the two correctly. This is even more significant when using indicators on the time-based chart such as volume, third party proprietary indicators or those which are freely available. So, what’s the answer? The Time-accurate renko indicator solves the issue instantly. It is unique and as far as we know nobody has developed such an indicator to provide a solution to this problem. So how does it work? And as you might expect the answer is all in the name. We call it the Time-accurate renko indicator because that’s what it is. In simple terms it aligns the bricks it builds with the time-based chart above. So where for example the time-based price action moves into congestion, so does the time accurate renko and will build a horizontal wall of bricks at that level until the price action breaks away, at which point the Time-accurate renko begins building in the normal way with bricks which rise or fall with the trend. What the chart then delivers is a wonderful picture of clear levels of support and resistance as you might see when a brick wall is under construction, helping traders to establish breakaway price action which all the time is mirrored on the time-based chart with the chosen indicators. What makes the Time-accurate renko even more powerful is the option to select either your own choice of brick size or alternatively the optimised version which means you are trading in harmony with the market. The optimal setting is derived from calculations based on average true range and delivers the perfect brick size for all markets, timeframes and session times, so there is no more guesswork. The indicator does it all for you. However, if you prefer to set your own brick size this is available also. And the best news of all, is that the Time-accurate renko is included with the Standard renko, so you have two indicators for the price of one and can switch from one to the other at any time or perhaps run both. The choice is yours with this unique combination of renko indicators.
مؤشر Pine Script®
من ‎QuantumTradingSoftware‎
48
IC Options °Turn the Dashboard on or off °Turn the Signal Bars on or off °Turn the Buy & Sell Signals on or off °Turn the Fibonacci Retracement Tool on or off The Dashboard information is best used for confirmation and informational purposes -above 9 ema is bullish, below 9 ema is bearish trend This script allows user input, you can add or remove built in dashboard, color bars(inform you of when the price action is above or below the midpoint of the Void Lines), long short signals(can be used to find optimal entries and exits for trades on any time frame. Smaller time frames are best for scalping. Longer time frames are best for longer swing trades. This paired with 9,21,34 ema can produced profitable trades!), auto Fibonacci retracement(allows you to plot perfect Fib Lines every time.) -thanks for allow the following above being public domain from lemon:lemon:
مؤشر Pine Script®
من ‎ChartIC‎
5
NIKI MS CRYPTOThis indicator is created specifically for BTCUSDTPERP, BTCBUSD, and BTCUSDT cryptocurrency pairs. It is not profitable in other cryptocurrency pairs. It only works on the 5-minute chart with a candle pattern. This indicator is just based on multi-timeframe Supertrend analysis. This indicator is more suitable for scalping. The target is 0.45% and the stop loss is 0.4%, which can be adjusted from the indicator settings. The yellow candle on the chart represents the entry and the blue candle represents the exit. All signals should be considered only after the candle is closed. This indicator comes with Algo trading settings. By setting an alarm you can do robot trading in Binance. Contact us using the links provided below to get access to this indicator.
مؤشر Pine Script®
من ‎Niki5289‎
1
Inverse BandsThis was the result of quite some time spent examining how much information could be gleamed by studying the interactions between Keltner Channels, STARC Bands and Bollinger Bands. I was surprised by the results. First of all, there are four fills that are black. Set the transparency of those to 0 and you'll see this indicator the way that it's meant to be seen. Those fills belong to unused sections of the Bollinger Bands. There are two clouds which represent STARC Bands and the Keltner Channel. There is some delay when they flip from bullish (green) to bearish (red), but they are indicative of the trend. The space between them is black and the narrower that space is, the greater volatility is. Because of this, we don't need the exterior Bollinger Bands. The Bollinger Bands remain visible as the yellow interior clouds on the top cloud and the blue interior clouds on the bottom cloud. Often, the thicker the yellow or blue cloud is, the less severe a throwback from a given trend reversal will be. Often the thinner that yellow or blue cloud is, the more severe the trend reversal will be. If price is rising into a thin interior yellow cloud, the following dip will be substantial. If price action dips towards a thicker interior blue cloud, often the pump following that dump will be less enthusiastic. We preserve the Keltner Channel and STARC bands as our cloud because the way that they interact with the three basis lines yields a lot of information. The yellow Bollinger basis line tells us about trend strength. The closer the BB basis line is to the top of the top cloud or the bottom of the bottom cloud, the stronger the trend is. When it enters the cloud very close to the bottom of the bottom cloud, you know you're looking at a strong pump, and vice versa when it's close to the top of the top cloud. The purple Keltner Channel basis line and orange STARC Band basis line can forecast short term trend changes one candlestick in advance by contacting any line in either cloud. The moment either basis line touches or crosses any boundary of the clouds, you know that the next candle will change directions. In an uptrend, a touch or cross means the next candle will have a lower high point. In a downtrend, a cross or touch means the next candle will have a higher high point. This is most useful in scalping. It'd be pretty easy to slap some crossover alerts on to this and useful considering that they come a candle in advance. Feel free to further explore and develop this.
مؤشر Pine Script®
من ‎ChronicMasturTrader‎
6