ابدأ الآن

حجم التداول

Range Sentiment Profile [LuxAlgo]The Range Sentiment Profile indicator is inspired from the volume profile and aims to indicate the degree of bullish/bearish variations within equidistant price areas inside the most recent price range. The most bullish/bearish price areas are highlighted through lines extending over the entire range. 🔶 SETTINGS Length: Most recent bars used for the calculation of the indicator. Rows: Number of price areas the price range is divided into. Use Intrabar: Use intrabar data to compute the range sentiment profile. Timeframe: Intrabar data timeframe. 🔶 USAGE This tool can be used to easily determine if a certain price area contain more significant bullish or bearish price variations. This is done by obtaining an estimate of the accumulation of all the close to open variations occurring within a specific profile area. A blue range background indicates a majority of bullish variations within each area while an orange background indicates a majority of bearish variations within each area. Users can easily identify the areas with the most bullish/bearish price variations by looking at the bullish/bearish maximums. It can be of interest to see where profile bins might have no length, these can indicate price areas with price variations with alternating signs (bullish variations are followed by a bearish sign) and similar body. They can also indicate a majority of either bullish or bearish variations alongside a minority of more significant opposite variations. These areas can also provide support/resistance, as such price entering these areas could reverse. Users can obtain more precise results by allowing the profile to use intrabar data. This will change the calculation of the profile, see the details section for more information. 🔶 DETAILS The Range Sentiment Profile's design is similar to the way a volume profile is constructed. First the maximum/minimum values over the most recent Length bars are obtained, these define the calculation range of the profile. The range is divided into Rows equidistant areas. We then see if price lied within a specific area, if it's the case we accumulate the difference between the closing and opening price for that specific area. Let d = close - open . The length of the bin associated to a specific area is determined as follows: length = Width / 100 * Area / Max Where Area is the accumulated d within the area, and Max the maximum value between the absolute value of each accumulated d of all areas. The percentage visible on each bin is determined as 100 multiplied by the accumulated d within the area divided by the total absolute value of d over the entire range. 🔹 Intrabar Calculation When using intrabar data the range sentiment profile is calculated differently. For a specific area and candle within the interval, the accumulated close to open difference is accumulated only if the intrabar candle of the user selected timeframe lies within the area. This can return more precise results compared to the standard method, at the cost of a higher computation time.
مؤشرات Pine Script™
من ‎LuxAlgo‎
37
Crypto Uptrend Script + Pullback//Volume CandlesDescription: his is an adaption of my Pullback candle - This works on all timeframes and Markets (Forex//Stocks//) Crypto Uptrend Script with Pullback Candle allows traders to get into a trend when the price is at end of a pullback and entering a balance phase in the market (works on all markets). The use of Moving averages to help identify a Trends and the use of Key levels to help traders be aware of where strong areas are in the market. This script can work really well in Crypto Bull Runs when used on HTF and with confluences The script has key support and resistance zones which are made up of quarterly data. Price reacts to these areas but patience is required as price will take time to come into these areas I have updated the Pullback Candle with the use of Volume to filter out the weak Pullback Candles - There are new candles to the script. The First candle is the Bullish Volume Candle - This candle is set to a multiplier of 2x with a crossover of 50/100 on Volume - this then will paint a purple candle. Uses of the Bullish Volume Candle: Breakthrough of key areas // special chart patterns Rejection of key areas End of a impulse wave (Profit Takers) The second candle is a Hammer - I prefer using the Hammers on Higher Timeframes however they do work on all timeframes. . The third candle is a Exhaustion of impulse downward move. Uses of this candle - can denote a new trend but has to be with confluence to a demand area // support area or with any use of technical analysis - using this alone is not advised The fourth candle is a indecision candle in the shape of a Doji - this candle can help identify if the trend is in a continuation or a reversal This script can work really well in Crypto Bull Runs Disclaimer: There will be Pullbacks with High Volume (Breakouts) and not go the way as intended but this script is to allow traders to get into trends at good price levels. The script can paint signals in areas where price is too expensive so please do your own due diligence on the markets as this script is to help get into good areas of price Please leave a thumbs up if you like this script and message me for information on how to use the script.
مؤشرات Pine Script™
من ‎LuxTradeVenture‎
8
Volume Intensity OscillatorIntroducing the "Volume Intensity Oscillator" indicator, an advanced tool that utilizes the PeacefulIndicators library to gauge market volume intensity. This innovative indicator is designed to help traders identify potential market trends and improve their trading analysis. The Volume Intensity Oscillator offers the following key features: Adjustable input parameters, enabling you to modify the length and the option to remove negative values according to your trading preferences. A visually appealing display, with the Volume Intensity Oscillator represented as columns in different colors based on the direction of the market movement (red for bearish and green for bullish). Powered by the rvo function from the PeacefulIndicators library, the core functionality of the Volume Intensity Oscillator ensures accurate and reliable results. To integrate the Volume Intensity Oscillator into your trading analysis, simply add the script to your chart and customize the input parameters as needed. We hope this script, built upon the PeacefulIndicators library, becomes a valuable asset to your trading strategy.
مؤشرات Pine Script™
من ‎The_Peaceful_Lizard‎
3
Volume Flow OscillatorIntroducing the "Volume Flow Oscillator" indicator, a powerful and adaptable tool that incorporates the PeacefulIndicators library to analyze price movement strength and volume in the market. This indicator is designed to assist you in detecting potential opportunities and improving your trading analysis. The Volume Flow Oscillator indicator offers the following features: Adjustable input parameters, allowing you to modify the source (HLCC4 by default) and the short length to match your trading style and preferences. A visually appealing display, with the Volume Flow Oscillator line in orange, a zero line in gray, and filled areas between the 70 and -70 levels in blue, making it easy to interpret the indicator's signals. The core functionality of the Volume Flow Oscillator indicator is powered by the volume_flow_oscillator function from the PeacefulIndicators library, ensuring accurate and reliable results. To start using the Volume Flow Oscillator indicator in your trading analysis, simply add the script to your chart and customize the input parameters as needed. We hope this script, built upon the PeacefulIndicators library, proves to be a valuable addition to your trading strategy.
مؤشرات Pine Script™
من ‎The_Peaceful_Lizard‎
1
Volume Forecasting [LuxAlgo]The Volume Forecasting indicator provides a forecast of volume by capturing and extrapolating periodic fluctuations. Historical forecasts are also provided to compare the method against volume at time t . This script will not work on tickers that do not have volume data. 🔶 SETTINGS Median Memory: Number of days used to compute the median and first/third quartiles. Forecast Window: Number of bars forecasted in the future. Auto Forecast Window: Set the forecast window so that the forecast length completes an interval. 🔶 USAGE The periodic nature of volume on certain securities allows users to more easily forecast using historical volume. The forecast can highlight intervals where volume tends to be more important, that is where most trading activity takes place. More pronounced periodicity will tend to return more accurate forecasts. The historical forecast can also highlight intervals where high/low volume is not expected. The interquartile range is also highlighted, giving an area where we can expect the volume to lie. 🔶 DETAILS This forecasting method is similar to the time series decomposition method used to obtain the seasonal component. We first segment the chart over equidistant intervals. Each interval is delimited by a change in the daily timeframe. To forecast volume at time t+1 we see where the current bar lies in the interval, if the bar is the 78th in interval then the forecast on the next bar is made by taking the median of the 79th bar over N intervals, where N is the median memory. This method ensures capturing the periodic fluctuation of volume.
مؤشرات Pine Script™
من ‎LuxAlgo‎
4
Sunset candlesDisplays the volume behind each candle with colors, to visualise their evolution over time, directly in the chart. This indicator is best suited for dark mode (Suggested background color: #0a0c12). The more intense is the color, the bigger is the volume. The unit is a 400 periods moving average of the volume, considered as 1 volume. Each color represents half of this volume. For ex: Grays indicate under (or equal) to the 400 MA (low volumes). Bright yellow represents above 7 times the 400 MA (very high volumes). When there's no available volume datas, the candles turn bright green by default. The wicks' colors stay the same, and can still indicate the direction of the candle. In the settings, you can show/hide the gradient of the volume. By moving your chart over this gradient, it is possible to compare the candles to the colors, and read the corresponding volume number.
مؤشرات Pine Script™
من ‎ALifeToMake‎
4
Net Positions (Net Longs & Net Shorts) - By LeviathanThis script is an experimental indicator that visualizes the entering and exiting of long and short positions in the market. It also includes other useful tools, such as NL/NS Profile, NL/NS Delta, NL/NS Ratio, Volume Heatmap, Divergence finder, Relative Strength Index of Net Longs and Net Shorts, EMAs and VWMAs and more. To avoid misinterpretation, it's important to understand some basics. The “real” ratio between net long and net short positions in a given market is always 1:1. A futures contract is an agreement between two parties to buy or sell an underlying asset at an agreed-upon price. Each contract has a long side and a short side, with one party agreeing to buy (long) and the other party agreeing to sell (short) the asset at the agreed-upon price. The long position holder anticipates that the asset's price will rise, while the short position holder expects it to fall. Because every futures contract involves both a buyer and a seller, it is impossible to have more net longs than net shorts or vice versa (in terms of the net value). For every long position opened, there must be a corresponding short position taken by another market participant (and vice versa), thus maintaining the 1:1 ratio between longs and shorts. While there can be an imbalance in the number of traders/accounts holding long and short contracts, the net value of positions held on each side remains 1 to 1. Open Interest (OI) is a metric that tracks the number of open (unsettled) contracts in a given market. For example, Open Interest of 100 BTC means that there are currently 100 BTC worth of longs and 100 BTC worth of shorts open in the market. There may be more traders on one side holding smaller positions, and fewer traders on the other side holding larger positions, but the net value of positions on one side is equal to the net value of positions on the other side → 100 BTC in longs and 100 BTC in shorts (1:1). Consider a scenario in which a trader decides to open a long position for 1 BTC at a price of HKEX:30 ,000. For this long order to be executed, a counterparty must take the opposite side of the contract by placing an order to short 1 BTC at the same price of HKEX:30 ,000. When both the long and short orders are matched and executed, the open interest increases by 1 BTC, reflecting the addition of this new contract to the market. Changes in Open Interest essentially tell us 3 things: - OI Increase - new positions entered the market (both longs and shorts!) - OI Decrease - positions exited the market (both longs and shorts!) - OI Flat - no change in open positions due to low activity or simply lots of transfers of contracts However, different concepts can be used to analyze sentiment, aggressiveness, and activity in the market by analyzing data such as Open Interest, price, volume, etc. This indicator combines Open Interest data and price action to simplify the visualization of positions entering and exiting the market. It is based on the following concept: Increase in Open Interest + Increase in price = Longs Opening Decrease in Open Interest + Decrease in price = Longs Closing Increase in Open Interest + Decrease in price = Shorts Opening Decrease in Open Interest + Increase in price = Shorts Closing When "Longs Opening" occurs, the OI Delta value is added to the running total of Net Longs, and when "Longs Closing" occurs, the OI Delta value is subtracted from the running total of Net Longs. When "Shorts Opening" occurs, the OI Delta value is added to the running total of Net Shorts, and when "Shorts Closing" occurs, the OI Delta value is subtracted from the running total of Net Shorts. To summarize: Net Longs: Cumulative value of Longs Opening and Longs Closing (LO - LC) Net Shorts: Cumulative value of Shorts Opening and Shorts Closing (SO - SC) Net Delta: Net Longs - Net Shorts Net Ratio: Net Longs / Net Shorts This is the fundamental logic of how this script functions, but it also includes several other tools and options. Here is an overview of the settings: Type: - Net Positions (display values of Net Longs, Net Shorts, Net Delta, Net Ratio as described above) - Relative Strength (display Net Longs, Net Shorts, Net Delta, Net Ratio in the form of a momentum oscillator that measures the speed and change of movements. Same logic as RSI for price) Display as: - Candles (display the data in the form of candlesticks) - Lines (display the data in the form of candlesticks) - Columns (display the data in the form of columns) Cumulation: - Visible Range (data is cumulated from the first visible bar on your chart) - Full Data (data is cumulated from the beginning) Quoted in: - Base Currency (all data is presented in the pair’s base currency eg. BTC) - Quote Currency (all data is presented in the pair’s quote currency eg USDT) OI Sources - Pick the sources from where the data is collected (if available). Net Positions: - NET LONGS (show/hide Net Longs plot, choose candle colors, choose line color) - NET SHORTS (show/hide Net Shorts plot, choose candle colors, choose line color) - NET DELTA (show/hide Net Delta plot, choose candle colors, choose line color) - NET RATIO (show/hide Net Ratio plot, choose candle colors, choose line color) Moving Averages: - Type (choose between EMA and Volume Weighted Moving Average) - NET LONGS (show/hide NL moving average plot, choose length, choose color) - NET SHORTS (show/hide NS moving average plot, choose length, choose color) - NET DELTA (show/hide ND moving average plot, choose length, choose color) - NET RATIO (show/hide NR moving average plot, choose length, choose color) Profile: - Profile Data (choose the source data of the profile) - Value Area % (set the percentage width of profile’s value area) - Positions (set the position of the profile to left or right of the visible range) - Node Size (set the relative size of nodes to make them appear smaller or larger) - Rows (select the amount of rows displayed by the profile to control granularity) - POC (show/hide POC- Point Of Control and select its color) - VA (show/hide VA- Value Area and select its color) Divergence finder - Source (choose the source data used by the script to compare it with price pivot points) - Maximum distance (the maximum distance between two divergent pivot points) - Lookback Bars Left (the number of bars to the left of the current bar that the function will consider when looking for a pivot point) - Lookback Bars Right (the number of bars to the right of the current bar that the function will consider when looking for a pivot point) Stats: - Show/Hide the Stats table - Bars Back (choose the length of data analyzed for stats in number of bars) - Position (choose the position of the Stats table) - Select Data you want to display in the Stats table Additional Settings: - Volume Heatmap (show/hide volume heatmap and select its color) - Label Offset (select how much the plot label is shifted to the right - Position Relative Strength Length (select the length used in the calculation) - Value Label (show/hide OI Delta values when candles are displayed) - Plot Labels (show/hide the labels next to the plot) - Wicks (show/hide wick when candles are displayed) Code used for generating profiles is taken from @KioseffTrading's "Profile Any Indicator" script (used with author's permission)
مؤشرات Pine Script™
من ‎LeviathanCapital‎
30
VWAP+15EMA with RSIVWAP+EMA+RSI Strategy for the group MelléCasH This strategy will enter a long position when the closing price is above both the VWAP and the 15 EMA, and the RSI is above the specified overbought level. It will exit the position when the price falls by the specified stop loss percentage, rises by the specified take profit percentage, or when the trailing stop loss (which trails the highest price achieved after the position was entered by the specified percentage) is hit. The VWAP, EMA, and RSI indicators are also plotted on the chart for reference.
استراتيجيات Pine Script™
من ‎Soeccke‎
2
Moonhub IndexMoonhub Index combines several popular technical indicators to create an aggregated index that aims to give a clearer overall picture of the market. The index takes into account the current market condition (trending, ranging, or volatile) to adjust its calculations accordingly. The indicators used in this composite index are: Hull Moving Average (HMA) Fisher Transform (FT) Williams Alligator Moving Average Convergence Divergence (MACD) Average True Range (ATR) On-Balance Volume (OBV) Money Flow Index (MFI) Accumulation/Distribution (AD) Pivot Points True Strength Index (TSI) Volume-Weighted Average Price (VWAP) The script calculates the values of each indicator and then normalizes and weighs them according to predefined weights. The composite index is formed by summing the weighted values of each indicator. The final Moon Index is plotted on the chart, along with several other related lines like the exponential moving averages (EMA) and simple moving averages (SMA) of the index. This custom index can be used by traders to get a more comprehensive view of the market and make better-informed trading decisions based on the combined insights of multiple indicators.
مؤشرات Pine Script™
من ‎Moonhub‎
2
Supply and Demand Visible Range [LuxAlgo]The Supply and Demand Visible Range indicator displays areas & levels on the user's chart for the visible range using a novel volume-based method. The script also makes use of intra-bar data to create precise Supply & Demand zones. 🔶 SETTINGS Threshold %: Percentage of the total visible range volume used as a threshold to set supply/demand areas. Higher values return wider areas. Resolution: Determines the number of bins used to find each area. Higher values will return more precise results. Intra-bar TF: Timeframe used to obtain intra-bar data. 🔶 USAGE The supply/demand areas and levels displayed by the script are aimed at providing potential supports/resistances for users. The script's behavior makes it recalculate each time the visible chart interval/range changes, as such this script is more suited as a descriptive tool. Price reaching a supply (upper) area that might have been tested a few times might be indicative of a potential reversal down, while price reaching a demand (lower) area that might have been tested a few times could be indicative of a potential reversal up. The width of each area can also indicate which areas are more liquid, with thinner areas indicating more significant liquidity. The user can control the width of each area using the Threshold % setting, with a higher setting returning wider areas. The precision setting can also return wider supply/demand areas if very low values are used and has the benefit of improving the script execution time at the cost of precision. The Supply and Demand Zones indicator returns various levels. The solid-colored levels display the average of each area, while dashed colored lines display the weighted averages of each area. These weighted averages can highlight more liquid price levels within the supply/demand areas. Central solid/dashed lines display the average between the areas' averages and weighted averages. 🔶 DETAILS Each supply/demand area is constructed from volume data. The calculation is done as follows: The accumulated volume within the chart visible range is calculated. The chart visible range is divided into N bins of equal width (where N is the resolution setting) Calculation start from the highest visible range price value for the supply area, and lowest value for the demand area. The volume within each bin after the starting calculation level is accumulated, once this accumulated volume is equal or exceed the threshold value ( p % of the total visible range volume) the area is set. Each bin volume accumulation within an area is displayed on the left, this can help indicate how fast volume accumulates within an area. 🔶 LIMITATIONS The script execution time is dependent on all of the script's settings, using more demanding settings might return errors so make sure to be aware of the potential scenarios that might make the script exceed the allowed execution time: Having a chart's visible range including a high number of bars. Using a high number of bins (high resolution value) will increase computation time, this can be worsened by using a high threshold %. Using very low intra-bar timeframe can drastically increase computation time but can also simply throw an error if the chart timeframe is high. Users facing issues can lower the resolution value or use the chart timeframe for intra-bar data.
مؤشرات Pine Script™
من ‎LuxAlgo‎
115
Volume Profile Fixed Range Support and Resistance LevelsThis script is based on the excellent Volume Profile / Fixed Range indicator by @LonesomeTheBlue, so all credit for the foundations of this indicator goes to @LonesomeTheBlue I basically made 5 instances of the original script and added horizontal lines at the beginning and end of the each Value Area. To use the script as a support and resistance tool without the Value Areas and Point of Control (POC) labels you just need to untick "Boxes" and "Labels" in the "Style" section of the “Settings”. The default look-back periods (in bars) are 7, 30, 60, 180 and 365, but you can change this or the colour of the lines easily in the “Settings”. The dashed lines are the respective POC. I find this tool to be very useful for quickly identifying interest levels on any chart while also ensuring a certain amount of objectivity in your TA. Hope you find it useful and thanks again to @LonesomeTheBlue for going through the trouble of coding this and being so generous to share it with the rest of us! Good luck out there!
مؤشرات Pine Script™
من ‎vranabanana‎
4
Volume / Open Interest "Footprint" - By LeviathanThis script generates a footprint-style bar (profile) based on the aggregated volume or open interest data within your chart's visible range. You can choose from three different heatmap visualizations: Volume Delta/OI Delta, Total Volume/Total OI, and Buy vs. Sell Volume/OI Increase vs. Decrease. How to use the indicator: 1. Add it to your chart. 2. The script will use your chart's visible range and generate a footprint bar on the right side of the screen. You can move left/right, zoom in/zoom out, and the bar's data will be updated automatically. Settings: - Source: This input lets you choose the data that will be displayed in the footprint bar. - Resolution: Resolution is the number of rows displayed in a bar. Increasing it will provide more granular data, and vice versa. You might need to decrease the resolution when viewing larger ranges. - Type: Choose between 3 types of visualization: Total (Total Volume or Total Open Interest increase), UP/DOWN (Buy Volume vs Sell Volume or OI Increase vs OI Decrease), and Delta (Buy Volume - Sell Volume or OI Increase - OI Decrease). - Positive Delta Levels: This function will draw boxes (levels) where Delta is positive. These levels can serve as significant points of interest, S/R, targets, etc., because they mark the zones where there was an increase in buy pressure/position opening. - Volume Aggregation: You can aggregate volume data from 8 different sources. Make sure to check if volume data is reported in base or quote currency and turn on the RQC (Reported in Quote Currency) function accordingly. - Other settings mostly include appearance inputs. Read the tooltips for more info.
مؤشرات Pine Script™
من ‎LeviathanCapital‎
75
Percent of U.S. Stocks Above VWAPThis indicator plots a line reflecting the percentage of all U.S. stocks above or below their VWAP for the given candle. Horizontal lines have been placed at 40% (oversold), 50% (mid-line), and 60% (overbought). I recommend using this indicator as a market breadth indicator when trading individual stocks. In my experience, this indicator is best utilized while trading the major indices (SPX, SPY, QQQ, IWM) or their futures (ES, NQ, RTY) in the following manner: - When the line crosses 50%, a green or red triangle is plotted indicating the majority of market momentum has turned bullish or bearish based on price positioning vs. VWAP. Look for longs when the line is rising (green) or above 50%, or shorts when the line is falling (red) or below 50%. - When the line is below 40%, indicator shows red shading; I would not be long anything during this period. When the line exits this level, I begin looking for long entries. This line is adjustable in the indicator settings if you prefer to use a tighter or looser oversold level. - When the line is above 60%, indicator shows green shading; I would not be short anything during this period. When the line exits this level, I begin looking for short entries. This line is adjustable in the indicator settings if you prefer to use a tighter or looser overbought level. This indicator uses the TradingView ticker “PCTABOVEVWAP.US”, thus it only updates during NY market hours. If trading futures, I recommend applying VWAP to your chart and using that as the level to trade against in a similar manner, along with your personal price action analysis and other indicators you find useful.
مؤشرات Pine Script™
من ‎BigGuavaTrading‎
18
Accumulation/DistributionAccumulation/Distribution explains when the big players buy or sell, according to Wyckoff. I added some colors to make it more visibly, to get a hint when (not) to invest. A/D is a lagging indicator. When the MA is above A/D line, this should reflect distribution time, and big players are selling. The oppsite is when MA is below the A/D line, then this should be an accumulation phase, and big players are buying. For example, my preference is a TEMA20 for crypto, this gives me good results. But I added a bunch of moving averages to choose from. Depending on preferences/marked you can choose a moving average, set its length, and you can choose all the colors too. I recommend the Volume indicator to setup the MA line, and this will get much better results! I hope this script will help some people to do some better decisions. And I am pleased to get some advice to make this script even better! There is only one similar-sounding script in the public section. Kudos go to jbneto with his Accum/ Dist + 200 EMA which gave me the inspiration. It has a EMA200, and its focus is on the daily pivot price.
مؤشرات Pine Script™
من ‎weak_hand‎
3
Volume DockThis oscillator has two different modes: The first one called RSIs is a comparison between the Relative strength index of the Accumulation/Distribution (and the On Balance Volume) and the normal price, to analyze the differences in momentum between the price with volume and without. The second one, called Dock, is similar except for the fact that the lines are smoothed using the hull moving average formula, this mode is great to signal entries and for reversal analyzing.
مؤشرات Pine Script™
من ‎OmegaTools‎
Volume change [ Unlimited ]This indicator displays volume and volume change information on a chart. It is designed to help traders analyze changes in trading volume over time and identify potential trading opportunities. The indicator takes an input from the user to set the length of the exponential moving average (EMA) applied to the volume data. This EMA is used to smooth out short-term fluctuations in volume and highlight the overall trend in volume. The indicator calculates whether the current bar is up or down and calculates the change in volume. It then sets the color of the volume and volume change columns based on whether the bar is up or down and whether the volume change is positive or negative. By displaying this information on a chart, the indicator can help traders identify patterns or trends in volume and volume change that may indicate potential trading opportunities. For example, increasing volume along with rising prices could indicate strong buying pressure and a potential bullish trend, while decreasing volume along with falling prices could indicate weak selling pressure and a potential bearish trend.
مؤشرات Pine Script™
من ‎PeterSafarxde‎
1
Volume [theEccentricTrader]OVERVIEW This indicator simply bridges the gap between symbols from brokers that provide volume data and symbols from brokers that do not provide volume data. Users can select any symbol that provides volume data from the settings menu and the volume data will be displayed in histogram form on their current chart. The default volume symbol is CURRENCYCOM:US500. CONCEPTS Volume Volume refers to the total number of shares or contracts that are traded during a given period of time. It is a measure of the amount of activity in the market and can be used to gauge the strength or weakness of a particular trend. Volume is typically displayed as a histogram on trading charts, with each bar representing the total volume for a particular time period. High volume bars indicate a lot of trading activity, while low volume bars indicate relatively little trading activity. Traders use volume in a number of ways. For example, they may use it to confirm a trend. If a stock is trending up and the volume is also increasing, this can be seen as a sign that the trend is strong and likely to continue. Conversely, if a stock is trending down and the volume is also increasing, this can be seen as a sign that the trend is weak and may be coming to an end. Volume can similarly be used to identify potential reversals. If a stock is trending up but the volume starts to decrease, this could indicate that the trend is losing momentum and that a reversal may be imminent. FEATURES Inputs • Volume Symbol Style Users can change plot color and style from the default Style menu if so required. NOTES For 24-hour markets and forex volume I use the broker currency.com. As can be seen in the example above, I am using CURRENCYCOM:USDJPY to pull volume to a FOREXCOM:USDJPY chart, which otherwise would not show volume data as forex.com do not provide it.
مؤشرات Pine Script™
من ‎theEccentricTrader‎
Vorse4**Vorse4 Indicator** The Vorse4 Indicator is a technical analysis tool that combines Chaikin Oscillator, Intraday Momentum Index (IMI), MACD, and Parabolic SAR indicators. This indicator generates trading signals when all four indicators simultaneously provide buy or sell signals and visually presents these signals on the chart. **How to Use:** 1. Buy signal: A buy signal is generated when there is a positive crossover in the Chaikin Oscillator, the IMI is above 50, the MACD line crosses the signal line upwards, and the price is above the Parabolic SAR. It is marked with a green arrow below the chart. 2. Sell signal: A sell signal is generated when there is a negative crossover in the Chaikin Oscillator, the IMI is below 50, the MACD line crosses the signal line downwards, and the price is below the Parabolic SAR. It is marked with a red arrow above the chart. 3. Turning zones: Areas with a high probability of transitioning from buy to sell or sell to buy are marked in yellow. These zones are determined by monitoring turning points in the Chaikin Oscillator, MACD, and Intraday Momentum Index. **How to Apply:** 1. In your TradingView chart, go to the indicators menu and search for the "Vorse4" indicator. 2. Add the indicator to your chart. You will see green and red arrows indicating buy and sell signals, as well as yellow-colored areas representing turning zones on your chart. 3. Observe the buy and sell signals and trade according to your strategy. Analyze the performance of the indicator on historical data to evaluate the reliability of the signals. **Note:** You can adjust the indicator parameters to balance the frequency and accuracy of buy and sell signals. Each strategy has a different risk-reward balance, so you can try different values to find the one that works best for you.
مؤشرات Pine Script™
من ‎krmdstn‎
Typical Price Difference - TPD © with reversal zones and signalsv1.0 NOTE: The maths have been tested only for BTC and weekly time frame. This is a concept that I came through after long long hours of VWAP trading and scalping. The idea is pretty simple: 1) Typical Price is calculated by (h+l+c) / 3. If we take this price and adjust it to volume we get the VWAP value. The difference between this value and the close value, i call it " Typical Price Difference - TPD ". 2) We get the Historical Volatility as calculated by TradingView script and we add it up to TPD and divide it by two (average). This is what I call " The Source - TS ". 3) We apply the CCI formula to TS . 4) We calculate the Rate of Change (roc) of the CCI formula. 5) We apply the VIX FIX of Larry Williams (script used is from ChrisMoody - CM_Williams_Vix_Fix Finds Market Bottoms) *brilliant script!!! How to use it: a) When the (3) is over the TPD we have a bullish bias (green area). When it's under we have a bearish bias (red area). b) If the (1) value goes over or under a certain value (CAUTION!!! it varies in different assets or timeframes) we get a Reversal Zone (RZ). Red/Green background. c) If we are in a RZ and the VIX FIX gives a strong value (look for green bars in histogram) and roc (4) goes in the opposite direction, we get a reversal signal that works for the next week(s). I applied this to BTC on a weekly time frame and after some corrections, it gives pretty good reversal zones and signals. Especially bottoms. Also look for divergences in the zones/signals. As I said I have tested and confirmed it only on BTC/weekly. I need more time with the maths and pine to automatically adjust it to other time frames. You can play with it in different assets or time frames to find best settings by hand. Feel free to share your thoughts or ideas on this. P.S. I realy realy realy try to remember when or how or why I came up with the idea to combine typical price with historical volatility and CCI. I can't! It doesn't make any sense LOL
مؤشرات Pine Script™
من ‎MyFire_Yiannis‎
Pressure Volume by MolnarThe Pressure Volume script is a technical indicator that is used to identify buying and selling pressure in a market based on changes in volume. The indicator calculates the average volume over a specified lookback period and then calculates the percentage change in volume for each bar. If the percentage change in volume exceeds a user-defined threshold, then the indicator signals the presence of buying or selling pressure. To use the script, you simply need to add it to a chart in TradingView. The script allows you to adjust two input parameters: the lookback period and the threshold percentage. The lookback period is the number of bars to use when calculating the average volume, and the threshold percentage is the amount by which the current bar's volume must exceed the average volume in order to trigger a buying or selling pressure signal. When the script detects buying pressure, it displays a green triangle above the bar, and when it detects selling pressure, it displays a red triangle below the bar. You can adjust the size of the triangles using the "size" input parameter. It's important to note that the Pressure Volume script is just one tool among many that traders use to analyze the market. It should be used in conjunction with other indicators and analysis techniques to make informed trading decisions.
مؤشرات Pine Script™
من ‎mlrradu12‎
VWAP ROC Weighted AverageThe VWAP ROC Weighted Average indicator combines the concepts of Volume Weighted Average Price (VWAP) and Rate of Change (ROC) to create a unique and versatile tool for traders. The indicator calculates the average VWAP and average ROC over a specified period (default: 200 bars) and then creates a weighted average of these two values. This provides a single line that can help traders identify potential entry and exit points in a market. How it can be used in trading: Trend Confirmation: The VWAP_ROC_WA can be used to confirm the prevailing trend of an asset. If the weighted average line is moving upward, it indicates a bullish trend, while a downward-moving line suggests a bearish trend. Traders can use this information to enter trades in the direction of the trend to improve their odds of success. Support and Resistance: The VWAP_ROC_WA line can act as dynamic support and resistance levels. When the price is above the weighted average line, it can act as a support level, and when the price is below the line, it can serve as a resistance level. Traders can use these levels to set stop-loss and take-profit orders or to identify potential entry and exit points. Divergences: Traders can look for divergences between the price and the VWAP_ROC_WA line to identify potential reversals. For instance, if the price is making higher highs while the weighted average line is making lower highs, it may signal a bearish divergence, indicating a potential reversal to the downside. Conversely, if the price is making lower lows while the weighted average line is making higher lows, it may signal a bullish divergence, indicating a potential reversal to the upside. Crossovers: Traders can monitor crossovers between the price and the VWAP_ROC_WA line. A bullish crossover occurs when the price crosses above the weighted average line, suggesting a potential long entry point. A bearish crossover occurs when the price crosses below the line, suggesting a potential short entry point.
مؤشرات Pine Script™
من ‎brhodes88‎
2
Linear Regression Volume ProfileLinear Regression Volume Profile plots the volume profile fixated on the linear regression of the lookback period rather than statically across y = 0. This helps identify potential support and resistance inside of the price channel. Settings Linear Regression Linear Regression Source: the price source in which to sample when calculating the linear regression Length: the number of bars to sample when calculating the linear regression Deviation: the number of standard deviations away from the linear regression line to draw the upper and lower bounds Linear Regression Rows: the number of rows to divide the linear regression channel into when calculating the volume profile Show Point of Control: toggle whether or not to plot the level with highest amount of volume Usage Similar to the traditional Linear Regression and Volume Profile this indicator is mainly to determine levels of support and resistance. One may interpret a level with high volume (i.e. point of control) to be a potential reversal point. Details This indicator first calculates the linear regression of the specified lookback period and, subsequently, the upper and lower bound of the linear regression channel. It then divides this channel by the specified number of rows and sums the volume that occurs in each row. The volume profile is scaled to the min and max volume.
مؤشرات Pine Script™
من ‎DeltaSeek‎
4