ابدأ الآن

مؤشر فراكتالز، ويليامز

HTF LQ SweepThe following script recognises QL sweeps in the desired time frame with alarm function! Theory: There is liquidity above highs and below lows. If this is tapped and the market reacts strongly immediately, the probability of a reversal is greatly increased! In the chart, this is defined in such a way that a candle has its wicks BELOW the old low, but the close is ABOVE the old low. the same applies to the high, of course! In such a case we have an "LQ Sweep" How does the script work? Williams 3 fractals are used as a basis. These are meaningful as lows or highs. Whenever a fractal is created, the price level is saved. This means that not only the last fractal is relevant, but all historical fractals as long as they have not been reached! If a candle reaches the level, but shows a rejection and closes within the level again, we have our "LQ Sweep" setup. In the script you can select the timeframe in which the market has to be analysed. When the QL sweep occurs, an alert is triggered. This saves a lot of time because you can analyse different markets in different timeframes at the same time! Each QL Sweep is marked in the chart when we are in the selected timeframe. These can also be deactivated so that only the last sweep is displayed. Benefits for the trader: An LQ sweep is a nice confirmation for a reversal. If we have such an LQ sweep, we can wait in the lower timeframe for further confirmation, such as a structural break, to position our entries there. The alarm function saves us a lot of time and we only go to the chart when a potential setup has been created. You can set different time frames in the script: The selected time frame is then scanned and sends a signal when the event occurs.
مؤشرات Pine Script™
من ‎LiquiditySchoolPRO‎
Fractal Breakout Trend Following StrategyOverview The Fractal Breakout Trend Following Strategy is a trend-following system which utilizes the Willams Fractals and Alligator to execute the long trades on the fractal's breakouts which have a high probability to be the new uptrend phase beginning. This system also uses the normalized Average True Range indicator to filter trades after a large moves, because it's more likely to see the trend continuation after a consolidation period. Strategy can execute only long trades. Unique Features Trend and volatility filtering system: Strategy uses Williams Alligator to filter the counter-trend fractals breakouts and normalized Average True Range to avoid the trades after large moves, when volatility is high Configurable Trading Periods: Users can tailor the strategy to specific market windows, adapting to different market conditions. Flexible Risk Management: Users can choose the stop-loss percent (by default = 3%) for trades, but strategy also has the dynamic stop-loss level using down fractals. Methodology The strategy places stop order at the last valid fractal breakout level. Validity of this fractal is defined by the Williams Alligator indicator. If at the moment of time when price breaking the last fractal price is higher than Alligator's teeth line (8 period SMA shifted 5 bars in the future) this is a valid breakout. Moreover strategy has the additional volatility filtering system using normalized ATR. It calculates the average normalized ATR for last user-defined number of bars and if this value lower than the user-defined threshold value the long trade is executed. When trade is opened, script places the stop loss at the price higher of two levels: user defined stop-loss from the position entry price or down fractal validation level. The down fractal is valid with the rule, opposite as the up fractal validation. Price shall break to the downside the last down fractal below the Willians Alligator's teeth line. Strategy has no fixed take profit. Exit level changes with the down fractal validation level. If price is in strong uptrend trade is going to be active until last down fractal is not valid. Strategy closes trade when price hits the down fractal validation level. Risk Management The strategy employs a combined approach to risk management: It allows positions to ride the trend as long as the price continues to move favorably, aiming to capture significant price movements. It features a user-defined stop-loss parameter to mitigate risks based on individual risk tolerance. By default, this stop-loss is set to a 3% drop from the entry point, but it can be adjusted according to the trader's preferences. Justification of Methodology This strategy leverages Williams Fractals to open long trade when price has broken the key resistance level to the upside. This resistance level is the last up fractal and is shall be broken above the Williams Alligator's teeth line to be qualified as the valid breakout according to this strategy. The Alligator filtering increases the probability to avoid the false breakouts against the current trend. Moreover strategy has an additional filter using Average True Range(ATR) indicator. If average value of ATR for the last user-defined number of bars is lower than user-defined threshold strategy can open the long trade according to open trade condition above. The logic here is following: we want to open trades after period of price consolidation inside the range because before and after a big move price is more likely to be in sideways, but we need a trend move to have a profit. Another one important feature is how the exit condition is defined. On the one hand, strategy has the user-defined stop-loss (3% below the entry price by default). It's made to give users the opportunity to restrict their losses according to their risk-tolerance. On the other hand, strategy utilizes the dynamic exit level which is defined by down fractal activation. If we assume the breaking up fractal is the beginning of the uptrend, breaking down fractal can be the start of downtrend phase. We don't want to be in long trade if there is a high probability of reversal to the downside. This approach helps to not keep open trade if trend is not developing and hold it if price continues going up. Backtest Results Operating window: Date range of backtests is 2023.01.01 - 2024.05.01. It is chosen to let the strategy to close all opened positions. Commission and Slippage: Includes a standard Binance commission of 0.1% and accounts for possible slippage over 5 ticks. Initial capital: 10000 USDT Percent of capital used in every trade: 30% Maximum Single Position Loss: -3.19% Maximum Single Profit: +24.97% Net Profit: +3036.90 USDT (+30.37%) Total Trades: 83 (28.92% win rate) Profit Factor: 1.953 Maximum Accumulated Loss: 963.98 USDT (-8.29%) Average Profit per Trade: 36.59 USDT (+1.12%) Average Trade Duration: 72 hours These results are obtained with realistic parameters representing trading conditions observed at major exchanges such as Binance and with realistic trading portfolio usage parameters. How to Use Add the script to favorites for easy access. Apply to the desired timeframe and chart (optimal performance observed on 4h and higher time frames and the BTC/USDT). Configure settings using the dropdown choice list in the built-in menu. Set up alerts to automate strategy positions through web hook with the text: {{strategy.order.alert_message}} Disclaimer: Educational and informational tool reflecting Skyrex commitment to informed trading. Past performance does not guarantee future results. Test strategies in a simulated environment before live implementation
استراتيجيات Pine Script™
من ‎Skyrexio‎
Pivotal MomentsPivotal Moments draws lines for each of up to 500 pivot high and pivot low levels that have never been revisited at the present moment in time. After the Pivotal Moments indicator has been loaded onto chart and any of the subsequent realtime bars that are formed touch or cross a pivot level it is deleted. The duration for how long any touched or crossed pivot levels remain on chart before deletion may be extended by N bars or N units of time. There are user selectable options for the following: • Pivot Bars Left : the number of lower highs or higher lows that must be formed before a possible pivot bar can occur. • Right : the number of lower highs or higher lows that must be formed after potential pivot to validate a pivot bar. • Lines Show As : the choice of line style to use for the drawn pivot levels includes Dashed, Dotted, or Solid. • Wide : the number of lines wide for how thick the drawn pivot levels are desired to be on the chart. • Delay Removal : the number of units that touched or crossed pivot levels will persist on chart. • Units : the choice of which delay unit type includes nBars, nSecs, nMins, nHrs, or nDays. • Extend Right : the number of bars right of current bar to extend drawn pivot levels. • Show : the number of maximum recent drawn pivot levels to keep on chart. • Colors Used : the colors used for pivots high, low, and dual pivot bars. • Show Price Labels : the choice whether to show prices for levels. • On Right : the choice to move prices to right of pivot levels. • Show Pivot Bars : the choice to colorize pivot bars. If desired, alerts can be received for whenever new touches or crosses occur for both pivot highs and pivot lows by creating a single Alert. Note that these alerts are triggered by realtime bars which by their very nature are repainting prices, thus the alert creation window will warn of this with an orange exclamation symbol. For an illustration of how to create alerts for this indicator click the chart below: Credit: this indicator was originally built for @Luckshury, who has graciously given me permission to publish it publicly. NOTICE: This is an example script and not meant to be used as an actual strategy. By using this script or any portion thereof, you acknowledge that you have read and understood that this is for research purposes only and I am not responsible for any financial losses you may incur by using this script!
مؤشرات Pine Script™
من ‎allanster‎
20
Support & Resistance ZonesTitle: A Comprehensive Guide to the Support & Resistance Zones Indicator Introduction In the world of technical analysis, the Support & Resistance Zones indicator plays a crucial role in identifying potential trading opportunities. These zones are essential for traders looking to capitalize on bounces or break and retests. In this article, we will delve into the specifics of the Support & Resistance Zones indicator, outlining how it works, how it finds and marks zones, and the various options available for traders. What the indicator is about The Support & Resistance Zones indicator, developed by @HarryCTC, is a powerful tool for detecting areas of potential price reversal or consolidation in a financial market. These zones are significant as they can act as a guide for traders to make informed decisions on entering or exiting positions. Specifically, the indicator helps identify: 1. Support Zones: Areas where the price has a tendency to bounce back up after falling, indicating a potential buying opportunity. 2. Resistance Zones: Areas where the price has a tendency to reverse after rising, indicating a potential selling opportunity. How the indicator finds its zones The Support & Resistance Zones indicator utilizes pivot points to identify potential support and resistance levels. By analyzing the fractal structure of the price chart, the indicator identifies key turning points, known as bull and bear fractals. The bull fractal is a high pivot point, while the bear fractal is a low pivot point. The fractal structure is determined by the 'Switch Zone Period' input, which can be adjusted to suit the trader's preferences. A higher value will result in fewer zones being identified, while a lower value will result in more zones. How it marks zones and why it marks zones The indicator marks the support and resistance zones by creating rectangular boxes around the identified fractal points. The zones are extended horizontally from the fractal point, allowing traders to visualize the potential areas of price reversal. The zones are marked for the following reasons: 1. To provide a clear visual representation of potential support and resistance levels. 2. To help traders identify potential entry and exit points based on the price's reaction to these zones. 3. To serve as a reference for stop-loss and take-profit levels when planning trades. The indicator's for traders trading bounces or break and retests Traders who focus on trading bounces or break and retests can benefit immensely from the Support & Resistance Zones indicator. By providing a visual representation of key support and resistance levels, the indicator enables traders to: 1. Identify potential buying opportunities at support zones where the price is likely to bounce back up. 2. Identify potential selling opportunities at resistance zones where the price is likely to reverse after rising. 3. Make informed decisions on stop-loss and take-profit levels based on the price's proximity to support and resistance zones. 4. Monitor the market for potential breakouts or breakdowns when the price breaches these zones. Indicator options The Support & Resistance Zones indicator offers several customizable options to suit the trader's preferences. These options include: 1. Switch Zone Period: Adjusts the number of periods used to calculate the fractal structure, influencing the number of identified zones. 2. No. of Displayed Zones: Determines the maximum number of zones displayed on the chart, ranging from 1 to 8. 3. Zone Extension: Adjusts the horizontal extension of the support and resistance zones. 4. Resistance Zone Color: Customizes the color of the resistance zone boxes. 5. Support Zone Color: Customizes the color of the support zone boxes. 6. Zone Border Color: Customizes the color of the zone box borders. Conclusion The Support & Resistance Zones indicator is a valuable tool for traders looking to identify potential trading opportunities based on the price's interaction with support and resistance levels. By providing a clear visual representation of these zones, the indicator allows traders to make informed decisions on entry and exit points, stop-loss, and take-profit levels. With customizable options, the indicator can be tailored to suit individual trading preferences and strategies.
مؤشرات Pine Script™
من ‎Harry-8FX‎
5
Fractals PivotsWhich trader does not know pivots? There are a lot of varieties of pivots indicators of which some are a default on most trading platforms. So what better way to challenge yourself then to create your own kind of pivots. Let's welcome the idea of Fractal Pivots. Williams Fractal or fractals is a technical analysis indicator introduced by the famous trader Bill Williams in his book ‘Trading Chaos’. He developed it on the basis of the Chaos Theory and trading psychology. The indicator is centred around the idea that there is repetition in price behaviour and fractals can provide an insight into those repetitive patterns. How does the indicator turn these into pivot lines? The user will set a time period in which the script will look for fractals. It will then remember all the fractals that happen during that time period. Let's say you are trading the hourly chart with a weekly pivot setting like in the chart this script is published on. The script will highling the 1h fractals that are happening. Then the next week it will use these exact fractals from previous week to draw the pivot lines. Another example here is an 8h chart. Look how it uses the previous week fractals this week. Let me know if you find a very great fractal length+timeframe setting where the levels really get respected. I would really appreciate that.
مؤشرات Pine Script™
من ‎Honestcowboy‎
[JL] Fractals ATR BlockI decided to combine Fractal ROC , ATR Break, and Order Blocks to an Indicator The Fractal ROC , ATR Break, and Order Blocks indicator combines three concepts to help traders identify potential trade opportunities and manage risk. By using a combination of Fractal ROC , ATR Break, and Order Blocks, traders can gain a deeper understanding of market dynamics and make more informed trading decisions. Fractal ROC is a momentum-based indicator that calculates the rate of change of the price between fractals, which are turning points in the market. It is calculated by taking the difference between the closing price and the lowest price in the previous n+1 periods, and dividing it by the difference between the open price 2n periods ago and the lowest price in the previous n+1 periods. This calculation is done for both up and down fractals. When the Fractal ROC value is greater than the ROC Break Level (as determined by the input variable roclevel), it indicates a potential momentum shift in the market. This can be used to identify potential trade entries or exits, depending on your trading strategy. ATR Break is an indicator that helps traders identify significant price movements in the market. It measures the distance between the price and the Average True Range (ATR), which is a measure of the volatility of the market. ATR Break is calculated by taking the difference between the close and high/low, and dividing it by the previous ATR value. This calculation is done for both up and down movements. When the ATR Break value is greater than the ATR Break Level (as determined by the input variable atrlevel), it indicates a significant move in the market. This can be used to identify potential breakouts or breakdowns, and can be used to set stop-loss and take-profit levels. An Order Block is a price level where significant buying or selling activity has taken place. The order blocks made by ATR Break and Fractal ROC are drawn using boxes on the chart. When the ATR or Fractal ROC level is breached, a box is drawn with the high and low of the candle that breached the level as the top and bottom of the box, respectively. The box is then extended to the right until the end of the chart or until another ATR or Fractal ROC level is breached, at which point a new box is drawn. This allows traders to easily identify significant price movements and potential support and resistance levels on the chart. When an Order Block is identified, it can be used as a potential support or resistance level . If price approaches an Order Block from below, it is likely to bounce off this level and continue in an upward direction. Similarly, if price approaches an Order Block from above, it is likely to bounce off this level and continue in a downward direction. Traders can use these levels to identify potential trade entries or exits, as well as to set stop-loss and take-profit levels. Overall, the Fractal ROC , ATR Break, and Order Blocks indicator is a powerful tool for traders who want to identify potential trade opportunities and manage risk. By combining these three concepts, traders can gain a deeper understanding of market dynamics and make more informed trading decisions. As with any indicator, it is important to use it in conjunction with other analysis tools and to have a clear trading plan in place.
مؤشرات Pine Script™
من ‎Jesse.Lau‎
End-pointed SSA of Williams %R [Loxx]End-pointed SSA of Williams %R is an indicator that runes Williams %R SSA calculation through a Singular Spectrum Analysis (SSA) algorithm to derive a smoother final output. The reduction in noise from the traditional Williams %R is significant. What is Williams %R? Williams %R , also known as the Williams Percent Range, is a type of momentum indicator that moves between 0 and -100 and measures overbought and oversold levels. The Williams %R may be used to find entry and exit points in the market. The indicator is very similar to the Stochastic oscillator and is used in the same way. It was developed by Larry Williams and it compares a stock’s closing price to the high-low range over a specific period, typically 14 days or periods. What is Singular Spectrum Analysis ( SSA )? Singular spectrum analysis ( SSA ) is a technique of time series analysis and forecasting. It combines elements of classical time series analysis, multivariate statistics, multivariate geometry, dynamical systems and signal processing. SSA aims at decomposing the original series into a sum of a small number of interpretable components such as a slowly varying trend, oscillatory components and a ‘structureless’ noise. It is based on the singular value decomposition ( SVD ) of a specific matrix constructed upon the time series. Neither a parametric model nor stationarity-type conditions have to be assumed for the time series. This makes SSA a model-free method and hence enables SSA to have a very wide range of applicability. For our purposes here, we are only concerned with the "Caterpillar" SSA . This methodology was developed in the former Soviet Union independently (the ‘iron curtain effect’) of the mainstream SSA . The main difference between the main-stream SSA and the "Caterpillar" SSA is not in the algorithmic details but rather in the assumptions and in the emphasis in the study of SSA properties. To apply the mainstream SSA , one often needs to assume some kind of stationarity of the time series and think in terms of the "signal plus noise" model (where the noise is often assumed to be ‘red’). In the "Caterpillar" SSA , the main methodological stress is on separability (of one component of the series from another one) and neither the assumption of stationarity nor the model in the form "signal plus noise" are required. "Caterpillar" SSA The basic "Caterpillar" SSA algorithm for analyzing one-dimensional time series consists of: Transformation of the one-dimensional time series to the trajectory matrix by means of a delay procedure (this gives the name to the whole technique); Singular Value Decomposition of the trajectory matrix; Reconstruction of the original time series based on a number of selected eigenvectors. This decomposition initializes forecasting procedures for both the original time series and its components. The method can be naturally extended to multidimensional time series and to image processing. The method is a powerful and useful tool of time series analysis in meteorology, hydrology, geophysics, climatology and, according to our experience, in economics, biology, physics, medicine and other sciences; that is, where short and long, one-dimensional and multidimensional, stationary and non-stationary, almost deterministic and noisy time series are to be analyzed. Included: Bar coloring [*Alerts [*Signals [*Loxx's Expanded Source Types Related Williams %R Indicators Williams %R on Chart w/ Dynamic Zones Williams %R w/ Bollinger Bands Intermediate Williams %R w/ Discontinued Signal Lines Related SSA Indicators End-pointed SSA of FDASMA End-pointed SSA of Normalized Price Oscillator
مؤشرات Pine Script™
من ‎loxx‎
1
Swing PointsEnglish: The indicator shows the fractals where stop-losses may be located and can be used to trade from their taking. You can adjust the length of the fractal (the number of bars with which it is surrounded on both sides, to confirm the validity). You can also display lines from fractal points for clarity. To keep the chart clean, you can enable deletion of already taken fractals. Example of use with deleted fractals and without lines: Русский: Индикатор показывает фракталы где могут находиться стоп-лоссы и его можно использовать для торговли от их снятия. Можно настраивать длину фрактала (количество баров, которыми он окружен с обеих сторон, для подтверждения валидности). Так же можно выводить линии от фрактальных точек для наглядности. Для сохранения чистоты графика можно включить удаление уже снятых фракталов. Пример использования с удалением снятых фракталов и без линий:
مؤشرات Pine Script™
من ‎tufedtm‎
8
Smaller Fractals (+ Transparency)Smaller Fractals (+ Transparency) I find that fractals are super useful, but can visually clutter up the chart pretty quickly. Their opaqueness and just overall bigness can become a bit much. As such, these are just like regular fractals, only smaller (pine script's`size.tiny` instead of the default `size.small`). Also, you can set a transparency level to these little guys (default is 50%). Simple, more polite, and hopefully more useful fractals for those wnting a cleaner looking chart. 😁
مؤشرات Pine Script™
من ‎ddctv‎
[VDB]TrendScalp-FractalBox-3EMAThere are many indicators with William’s Fractal and Alligator. As many use EMA’s it may be useful to define a 3-EMA ribbon and combining Fractal Levels/Box (filling background between top and bottom fractals) for trend scalping. I searched for this kind of indicator in community – some show fractals, some just levels, some with alligator etc. but couldn't find the one needed. Hence thought of this indicator which may be of interest to other users too. Key Points: EMA ribbon is created using 3 EMA’s 35/70/105. Users can change these as per their preference. This is used for trend identification – 1. Bullish bias if Price > EMA1 > EMA2 > EMA3. 2. Bearish bias if Price < EMA1 < EMA2 < EMA3. Background is marked during crossing of EMA1 and EMA2 to alert possible trend change. 5-bar fractals are used to mark the Fractal levels and background between top and bottom fractals are filled to create a Fractal Box. Fractal levels are marked only when the fractal formation is complete. Given offset is used this is lagging. How to Use: Sloping EMA ribbon is used for identifying the trend. Fractal box break-out/ break-downs are used to trigger the trade with fractal high/low for entry/SL. Waiting for price contraction towards EMA ribbon resulting in smaller boxes is key to initiate trade. Avoid bigger boxes as SL’s will be big and price may move within. To draw the vertical lines of FractalBox change fractal level0 style to step-line. This indicator combined with the cycle high/low (overbought/oversold) indicators such as CCI/Stochastic/RSI etc. can make it a good trend scalping setup while trading in the direction of momentum in higher timeframe. This setup could be used for any timeframes. Do your back-testing before using it in live market. This indicator was achieved by combing some fractal ideas from “Fractal and Alligator Alerts by JustUncleL” DISCLAIMER : This indicator has been created for educational reference only and do not constitute investment advice. This indicator should not be relied upon as a substitute for extensive independent market research before making your actual trading decisions. Market data or any other content is subject to change at any time without notice. Liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from use of this indicator is accountability of user using it.
مؤشرات Pine Script™
من ‎vireshdb‎
1
5min Williams Fractals scalping (3commas)Another strategy I'm learning Pine Script on. It is inspired by a MoneyZG youtube strategy called "Easy 5 Minute Scalping Strategy (Simple to Follow Scalping Trading Strategy)". Again this is a one order per trade strategy compatible with the 3commas bot (works also with the free 3commas subscription). This strategy is based on the signals from Williams Fractals, taking the signals in reverse - red triangle indicates a bottom and hence we go long. The green triangle indicates a top so we go short. By default these signals are only accepted if they occur between the two Emas. However, you can also turn this off and when a WF signal comes in, only the current price has to be between the Emas. Stop loss is set to the current Ema slow and the take profit is a multiple of the distance to the slow ema. Like previously I have added different filters as well as the ability to view essential things like the WF signal and Emas. I hope the script will help you to be more successful and if so it would be great if you could share here your setups, or tips on what would be good to refine to make it an even a more profitable strategy. Kind of a community approach so that we help each other out :). Instructions for the 3commas connector: 1. First, you need to prepare 3commas Long/Short bots that will only listen to custom TV signals. 2. Inputs for the 3commas bot can be found at the end of the user inputs. 3. Once you have entered the required details into the inputs, turn on 3commas comments. They should appear on the chart (looks messy). 4. Now you can add the alert where you should paste the 3commas Webhook URL: 3commas.io 5. For the alert message text insert the placeholder {{strategy.order.comment}} and delete the rest. 6. Once the alert is saved, you can turn off those 3commas comments to have a clearer chart. 7. With a new alert, the bot and trade should launch. In the near future I would like to publish more scripts that will carry similar elements as the first two, incl. compatibility with 3commas (I don't have access to another bot system). I will choose some strategies myself, but I will also be glad for some tips on what strategy would be good to do and is still missing here on Tradingview (short youtube videos or brief strategy manuals would be great). Thanks and keep it up PS: My screen values starting at Long Target Profit and ending at Pullback NOT greater than: 1.5; 1.5; 0; ON; 1; 2; OFF; 17; 36; ON; 0.05; ON; Chart; 14; 46; 50; 48.5; 51; OFF; 1; ON; 4; 2.
استراتيجيات Pine Script™
من ‎Zippy111‎
8
Fibonacci levels MTFHello All, I got some requests for a script that shows Fibonacci Levels of Higher Time Frame Candles. so I made/published this script. I hope it would be useful for you. Options: You can set Higher Time Frame, by default it's 1 Day. Optionally it can use Current or Last Candle of higher time frame to calculate/show its Fibonacci Levels. It can show higher time frame candles at the background optionally. You can change its colors. You can enable/disable/change each Fibonacci levels and their colors. You can enable/disable Fibonacci Labels that is shown at the right ride and see only Fibonacci lines/levels example, Fibonacci levels with higher time frame candles: P.S. if you have ideas to improve this script, drop a comment under the script please Enjoy!
مؤشرات Pine Script™
من ‎LonesomeTheBlue‎
45
[JL] How Many Signals last N barsGot this idea after I found Multiple Indicators Screener from QuantNomad. This script learnt some codes from QuantNomad's great script. Thanks to him. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ This table show how many signals happened during the last N bars. I only take care Forex, so this table only has 28 symbols. Feel free to change it. Calculate the following signals: RSI cross over/under 50 Short Moving average cross over/under long moving average Stochastic k cross over/under d MACD hist cross over/under 0 Williams Fractals: Up and Down fractals happened. The concept is simple: Range period will always happen more cross signals than the trend period. When the counter is less than median of all symbols, will be set green color. So more green mean more chance to be trend.
مؤشرات Pine Script™
من ‎Jesse.Lau‎
Fractal Breakout Strategy [KL]Fractal Breakout Strategy This strategy will enter into a Long position when (a) bullish fractal is formed, combined with (b) ATR is relatively low. Trailing stop loss is set based on ATR. Bullish fractal pattern : A bullish fractal pattern looks like this: It is formed when lower-low has reached a local minimum followed by higher-lows. By default, this script plots the pivot point (the local minimum) using green crosses. This line will extend to the right until the next bullish fractal is formed. The local minimum pivot point is considered as key level of support. For long position entry, entry price must be higher or equal to it. On the other hand, a bearish fractal pattern looks like the exact opposite. Reversing the logic, it is a local maximum indicated by higher-highs followed by lower-highs. This is shown by red crosses. Why use ATR to confirm entry : Two reasons to enter when ATR is low: 1) Since trailing stop loss is based on ATR, entering the market when ATR is low means risking less for potentially high reward. 2) Low ATR often signals price consolidation. There are two favorable scenarios, either: (i) period of accumulation, or (ii) bull flag, ideally followed by breakout. Determining whether ATR is low : Relative lows are quantified out by using the method in my other script: Modified ATR Indicator The method involves applying two-tailed hypothesis testing to assess whether ATR (ie. by default lookback period of 5) has greatly deviated from a larger sample size (ie. lookback period of 50). Assuming ATR is normally distributed and variance is known, then test statistic (z) can be used to determine whether ATR5 is within the critical area under Null Hypothesis: ATR5 == ATR50. If z falls below/above the left/right critical values (ie. 1.645 for a 90% confidence interval), then ATR is determined to the relatively low/high respectively. For the purpose of assessing whether ATR is low, the left-tail is the main focus. Profit taking : Profits by default are taken over 3 levels based on risk to reward ratio (ie. 1R, 2R, 3R). When a target is met at each level, strategy will close out one third of current position size. Remainders (ie. already taken once at 1R, but not yet reaching 2R or 3R) will eventually be closed at the trailing stop loss price.
استراتيجيات Pine Script™
من ‎DojiEmoji‎
7
EneX SignalEneX is signal that give recommendation signals for entry and exit on spot market. This indicators not suitable for leverage trading in futures market. EneX signal consider several indicators and has entry and exit rules. EneX signal is suitable for investors who believe in trend following strategy (disclaimer on). This script composed by Yohan Naftali for educational purpose only. Reader who will use this signal must do own research. Indicator and Plot Involved 1. Williams Fractals with default periods = 2 2. William Alligator Indicators with default simple moving average 8, 13, and 21 3. Exponential Moving Averages with default value EMA 50, 100, and 200 4. Relative Strength Index with default overbought level = 80 and oversold level = 20 5. Williams Fractals are joined to create support and resistance line and fill area between support and resistance lines. Entry signal conditions 1. Entry on Weakness when bullish fractal appear on n/2 period 2. Entry when price break resistance line All entry condition must above EMA and alligator signal and not in overbought RSI Exit signal conditions 1. Lowest price is below Exponential Moving Average 2. Lowest price is below William alligator lines You can easily find entry and exit points by using Entry (E), Exit(X) signals How to use 1. Monitor chart and wait until E or X signals 2. Entry if Entry Signal (E) appear (green colored label) 3. Exit if Exit Signal (X) appear (red colored label) 4. Change indicators setting when necessary Best Practice 1. Entry only when entry signal (E) appear 2. Never entry when price below William alligator signal 3. Exit when exit signal (X) appear 4. Not exit when exit signal appear when you believe or you have information that price will be rebound 5. Exit if you believe that current price meet your target price 6. Always wise when use EneX signals Disclaimer Do your own research and consider fundamental price of asset. The indicators provided on this script is for educational purposes only. Author does not offer advisory or brokerage services, nor does it recommend or advise users to buy or sell particular stocks or securities. Please examined script and give feedback for further improvement.
مؤشرات Pine Script™
من ‎YohanNaftali‎
7
Forex Fractal EMA ScalperThis is a forex scalper designed for very short timeframes 1-5 min max. At the same time due to the short timeframe, is recommend to re optimize it weekly . Its components are Fractals Triple EMA with different lengths Rules for entry: For long : we have an up fractal and all 3 ema are in ascending order For short: we have a down fractal and all 3 ema are in descending order. Rules for exit We exit when we either get a reverse order or when we hit the take profit or stop loss calculated in fixed pips.
استراتيجيات Pine Script™
من ‎exlux‎
3
Williams Fractals BUY/SELL signals indicatorThis indicator made with using Williams Fractals, 20 50 100 Moving Averages and Relative Strength Index. You can easily find entry points by using Long (L), Short (S) signals. This is a 15min scalping strategy for BTC:USDT Perpetual pair. For use different pairs or TFs you may need to change settings. How to use **************** When flashing Long (L) or Short (S) signal you should wait until the candle closing for the confirmation. After that candle closed with the signal, you can enter a trade in next candle opening. Your SL should be 3.1% from etnry and TP should be 0.5% from entry for best results. (You can use Long Position / Short Position tool in Prediction and Measurement Tools in drawing pannel to calculate this. This settings only for BTC:USDT Perp 15 min TF. For other TFs or Pairs settings may vary. You can easily change these settings and backtest your own.) After entering a trade you can be ignored next signals until close the trade. To learn more about this strategy, please try the "Williams Fractals Strategy" I coded. Thank you!
مؤشرات Pine Script™
من ‎CHATHURANGA91‎
2