Scrybblez Strategy## Scrybblez Strategy ##
How does this strategy work?
This strategy works particularly well with Bitcoin and can be applied to volatile coins with big swings, but properly configured it will perform decently coins with smaller movements.
Request access for a trial here or by twitter to @scrybblez
It comes preconfigured with settings for 202 minutes, and already takes into account that each transaction will have a commission of 0.075% (Binance and Bitmex both have this comission at the moment) and assumes you'll be starting with a capital of 100,000 and put 100% of this capital into each trade. This works for Bitcoin but fails for some coins when there's not enough liquidity, to have the strategy work with smaller coins change your capital down from 100,000 to 1 or 5 (this will basically be telling Tradingview that you have 1-5 BTCs to trade and not 100,000 BTC).
What timeframes does it work on?
The strategy is particularly setup to work on 202 minutes but will perform well in 1h-6h timeframes.
To use it in different timeframes to its optimum output mainly focus on increasing/decreasing accordingly the following values:
- Bull/Bear EMA Range
- Upper StopLoss band
- Lower StopLoss band
Noise filters play a smaller (but important) role on avoiding too many false entries.
- Bull noise filter
- Bear noise filter
What are all these options I see ?
0.Shorting
Toggle this option on/off depending on if you are in a platform that allows you to short (Bitmex, Bitfinex,...) or a platform that does not allow you to do so (Binance, KuCoin,...).
1. Time function
This strategy comes equipped with a time function that allows you to backtest from any given date to any given date.
Properties:
- From Year
- From Month
- From Day
- To Year
- To Month
- To Day
2. Noise Filtering/Smoothing
To avoid too many false entries the strategy filters noise with several algorithms, you can enable/ disable this Noise filter by turning it on/off with "Use Smoothing" and can configure it's noise cleaning properties with other properties. You can, if you wish, colour your background to easily identify what's the current trend we're on (bear in mind that the indicator does not necessarily exit on Bull/Bear trends if it detects them as temporary or weak ones).
Properties:
- Use Smoothing
- Bull noise filter
- Bear noise filter
- Color Bull/Bear Runs
3. StopLoss Bands
Initially both bands were being used to terminate entries if crossed, but right now they work in conjunction with other internal calculations to determine if we should enter a trade and in minor degree to exit. With the latest changes included in the algorithm, we do not use SL bands to IMMEDIATELY exit positions, but the option is there.
Poperties:
- Upper SL Band
- Lower SL Band
- Use SL Bands to Open Positions.
- Use SL Bands to Close Positions.
4.Ichimoku
By turning this on, you'll plot Ichimoku with Bitcoin settings, you can change it to its original settings by clicking the next option.
Can you give me examples on how well it performs?
Following this strategy from the 1st of January of 2017 until today 7th of September of 2018 would've netted you (comission already substracted) 49286% returns.
Following this strategy from the 1st of September of 2017 until today 7th of September of 2018 would've netted you (comission already substracted) 3941% returns.
Following this strategy from the 1st of January of 2018 until today 7th of September of 2018would've netted you (comission already substracted) 583.96% returns.
Give time to the strategy
Buysignal
Buy&Sell Bitmex StrategyConfigured algo into TradingView through a Python upgrade 2.0.
A scalper/swingtrader indicator on the following timeframes:
- 1H
- 4H
RSI/MFI - MTF - Entry signals/Trend colored bars - JD@version=2
This indicator is designed to give early entry signals as well as to follow trend moves, according to different settings.
The indicator shows a histogram of the RSI ro MFI in relation to an ema of the RSI or MFI.
The histogram is then smoothed to give early reversal/entry signals.
The actual RSI/MFI line with oversold/overbought indication can be displayed or omitted, as preferred.
in addition to the RSI/MFI line or as an alternative to it, the background colour can be set to change folowing the RSI/MFI signals.
The timeframe can be chosen. Higher timeframes (eg. 3h) tend to give less false signals.
version 5.
added support for custom Multiple Time Frame selection.
added option for choice of RSI or MFI as base indicator.
added option for price bar coloring according to the indicator. (deselecting "borders" in the "style" tab is recommended)
price bar coloring can be adjusted for different strategies:
1. following the slope of the histogram (for faster entry/exit signals)
2. according to positive or negative histogram (for longer moves)
3. according to pos. or neg. RSI/MFI (for longer term trend holds)
4. uptrend: biased towards faster buy signals and slower sell signals to stay in the uptrend
5. downtrend: biased towards faster sell signals and slower buy signals to stay in the downtrend
A longer timeframe (eg. 3x) is recommended for following trend moves.
try different strategies to see what works better for RSI or MFI.
JD.
CryptogramTR with OPEN CODEIndicator is obtained by importing RSI(14) into HULL moving average source with 2 different periods, as one is long period and the other is short.
When green line (short period) cross upward the red line (long period) , this is a BUY; vice versa it is a SELL.
When HMA Short Period is set to 1 (one), yielding line is absolutely the same line of RSI (14). You can change it into 8(eight) preferably.
İndikatör, RSI(14) indikatörünün, hull hareketli ortalamasının kod kaynağı olarak atanması ile elde edilmiştir. Uzun ve kısa olmak üzere 2 ayrı periyot kullanılmıştır.
Yeşil çizgi yani kısa periyotlu çizgi, kırmızı yani uzun periyotlu olanı yukarı keserse AL, tersi durum SAT olarak düşünülmelidir.
Hull Kısa Periyodu 1 iken oluşan yeşil çizgi, RSI(14) indikatörünü vermektedir. Kısa periyot olarak tercihinize göre bu değeri 8 olarak da kullanabilirsiniz.
TPA Price&Volume Index(4/4)TPVI is an indicator of price volatility and volume.
The crypto currency is also equipped with variables to set the score depending on whether it is light or heavy.
Supports all of Binance's existing markets (currently 141) (excluding arn, to be supported later)
The setting is based on current sensitivity of 995 and high, low, close average reflectance.
It is recommended to change to 993 for skelper who usually take it shortly then 998 is recommended for those who are swinging.
The lower the sensitivity, the more sensitive the price is.
There is also an sma check box and a len box.
This is a device to view moving averages when the score is too large and difficult to check properly, and averages the index score by the length of len.
By default, the 3min chart is used to catch up quickly, but it is also good for viewing long trends. However, you will need to reset the sensitivity for the chart at that time.
The usage is the same as above, and I am using this index to generate a lot of profit. Please invest all successful investments.
기본적으로 텔레방통한 알람 사용시 3분봉에 맞춰서 지표 쓰시면 됩니다.
TPVI (TPA Price&Volume Index)
(1/4)
(2/4)
(3/4)
(4/4)
TPVI ALERT
(1/4)
(2/4)
(3/4)
(4/4)
TPVI,가격변동과 볼륨을 함께 담은 지표입니다.
또한 해당 crypto 화폐가 가볍냐 무겁냐에 따라 점수를 책정하기 위한 변수도 탑재하고있습니다.
Binance의 전 시장(현재 141개)에 대해 지원합니다.(arn제외,추후지원예정)
세팅은 현재 민감도 995이고 high,low,close평균 반영을 기준으로 이뤄집니다.
통상 그때그때 짧게 가져가시는 스켈퍼 분들은 993으로 변경하시길 추천드리고 998은 스윙하시는 분들에게 추천드립니다.
민감도는 낮은 값을 가질수록 가격에 민감하게 반응합니다.
또한 sma체크란과 len 란이 있습니다.
이는 점수의 고저폭이 커 제대로 확인하기 힘들때 이동평균화 하여 보기 위한 장치로서 해당 지표점수를 len의 길이만큼 평균냅니다.
기본적으로 3min 차트를 사용하면 빠르게 상승을 잡아내기 위해 사용하지만, 긴 추세를 보는데도 좋습니다. 단, 해당시간의 차트에 대해 민감도를 재설정해야합니다.
사용법은 위와 같고 현재 필자도 이 지표를 이용해 많은 수익을 창출하고있습니다. 모두 성공투자하시기 바랍니다.
TPA Price&Volume Index(3/4)TPVI is an indicator of price volatility and volume.
The crypto currency is also equipped with variables to set the score depending on whether it is light or heavy.
Supports all of Binance's existing markets (currently 141) (excluding arn, to be supported later)
The setting is based on current sensitivity of 995 and high, low, close average reflectance.
It is recommended to change to 993 for skelper who usually take it shortly then 998 is recommended for those who are swinging.
The lower the sensitivity, the more sensitive the price is.
There is also an sma check box and a len box.
This is a device to view moving averages when the score is too large and difficult to check properly, and averages the index score by the length of len.
By default, the 3min chart is used to catch up quickly, but it is also good for viewing long trends. However, you will need to reset the sensitivity for the chart at that time.
The usage is the same as above, and I am using this index to generate a lot of profit. Please invest all successful investments.
기본적으로 텔레방통한 알람 사용시 3분봉에 맞춰서 지표 쓰시면 됩니다.
TPVI (TPA Price&Volume Index)
(1/4)
(2/4)
(3/4)
(4/4)
TPVI ALERT
(1/4)
(2/4)
(3/4)
(4/4)
TPVI,가격변동과 볼륨을 함께 담은 지표입니다.
또한 해당 crypto 화폐가 가볍냐 무겁냐에 따라 점수를 책정하기 위한 변수도 탑재하고있습니다.
Binance의 전 시장(현재 141개)에 대해 지원합니다.(arn제외,추후지원예정)
세팅은 현재 민감도 995이고 high,low,close평균 반영을 기준으로 이뤄집니다.
통상 그때그때 짧게 가져가시는 스켈퍼 분들은 993으로 변경하시길 추천드리고 998은 스윙하시는 분들에게 추천드립니다.
민감도는 낮은 값을 가질수록 가격에 민감하게 반응합니다.
또한 sma체크란과 len 란이 있습니다.
이는 점수의 고저폭이 커 제대로 확인하기 힘들때 이동평균화 하여 보기 위한 장치로서 해당 지표점수를 len의 길이만큼 평균냅니다.
기본적으로 3min 차트를 사용하면 빠르게 상승을 잡아내기 위해 사용하지만, 긴 추세를 보는데도 좋습니다. 단, 해당시간의 차트에 대해 민감도를 재설정해야합니다.
사용법은 위와 같고 현재 필자도 이 지표를 이용해 많은 수익을 창출하고있습니다. 모두 성공투자하시기 바랍니다.
TPA Price&Volume Index 2TPVI is an indicator of price volatility and volume .
The crypto currency is also equipped with variables to set the score depending on whether it is light or heavy.
Supports all of Binance's existing markets (currently 141) (excluding arn -0.65% , to be supported later)
The setting is based on current sensitivity of 995 and high, low, close average reflectance.
It is recommended to change to 993 for skelper who usually take it shortly then 998 is recommended for those who are swinging.
The lower the sensitivity, the more sensitive the price is.
There is also an sma check box and a len 0.52% box.
This is a device to view moving averages when the score is too large and difficult to check properly, and averages the index score by the length of len 0.52% .
By default, the 3min chart is used to catch up quickly, but it is also good for viewing long trends. However, you will need to reset the sensitivity for the chart at that time.
The usage is the same as above, and I am using this index to generate a lot of profit. Please invest all successful investments.
기본적으로 텔레방통한 알람 사용시 3분봉에 맞춰서 지표 쓰시면 됩니다.
TPVI (TPA Price&Volume Index)
(1/4)
(2/4)
(3/4)
(4/4)
TPVI ALERT
(1/4)
TPVI alert(1/4)
(2/4)
TPVI alert(2/4)
(3/4)
TPVI alert(3/4)
(4/4)
TPVI alert(4/4)
TPVI,가격변동과 볼륨을 함께 담은 지표입니다.
또한 해당 crypto 화폐가 가볍냐 무겁냐에 따라 점수를 책정하기 위한 변수도 탑재하고있습니다.
Binance의 전 시장(현재 141개)에 대해 지원합니다.(arn제외,추후지원예정)
세팅은 현재 민감도 995이고 high,low,close평균 반영을 기준으로 이뤄집니다.
통상 그때그때 짧게 가져가시는 스켈퍼 분들은 993으로 변경하시길 추천드리고 998은 스윙하시는 분들에게 추천드립니다.
민감도는 낮은 값을 가질수록 가격에 민감하게 반응합니다.
또한 sma체크란과 len 0.52% 란이 있습니다.
이는 점수의 고저폭이 커 제대로 확인하기 힘들때 이동평균화 하여 보기 위한 장치로서 해당 지표점수를 len의 길이만큼 평균냅니다.
기본적으로 3min 차트를 사용하면 빠르게 상승을 잡아내기 위해 사용하지만, 긴 추세를 보는데도 좋습니다. 단, 해당시간의 차트에 대해 민감도를 재설정해야합니다.
사용법은 위와 같고 현재 필자도 이 지표를 이용해 많은 수익을 창출하고있습니다. 모두 성공투자하시기 바랍니다.
TPVI alert(4/4)a Indicators for using alarms.
It captures a strong buying moment or momentary strong buying.
Basically, it is made for the purpose of catching and trading when the TPVI index is bouncing.
How to use is as follows.
Once you have registered TPVI 1,2,3,4 and TPVI ALERT 1,2,3,4.
The reason why there are four versions is because it exceeds the maximum number of items of BINANCE company (142) due to limit of the data which can be included in the Hanji table.
If you can use your computer on a regular basis, you can use TPVI to trade it. If you are outside or doing something else, you can use a telegram alarm or use your own alarm to refer to the traide.
1. For telegram users
In the telegram room, when the alarm of (1/4), (2/4), (3/4), (4/4) is detected, the TPVI ALERT indicator will bring up the window with four indicators on. And check the window where the alarm came out from 1/4 ~ 4/4. There will be a coin with a non-zero indicator value. Right-click on the right scale and select "Indicator Name" and "No Overlapping Label".You'll see the name of the indicator on the right, but find the name of the indicator other than the one on page 0.
The values of indicators are not important. Each value corresponds to an alarm on alarm off, and off equals 0 on the corresponding indicator.The reason why each value is different is that if all coins are the same, it becomes impossible to visually check them on the surface.Find the name of the relevant indicator on the TPVI and bet if it is rising.
2. When using Indicators through personal alarms
In this case, add an alarm -> select TPVI ALERT -> alert! Select value -> less than -2
This allows you to set the desired alarm if a specific value has sprung from the corresponding indicator of 1, 2, 3, or 4 (configurable).
Cumulative profits are enormous thanks to coin counterparts. Please enjoy your profits as well. Thank you.
TPVI지표의 알람사용을 원할시 필요한 지표입니다.
매집 또는 순간적인 강한 매수증가를 잡아냅니다.
기본적으로 TPVI 지표가 튀어오를떄 잡아내 매매를 하기 위한 목적으로 만들어졌습니다.
사용방법은 다음과 같습니다.
일단 TPVI 1,2,3,4와 TPVI ALERT 1,2,3,4를 등록해둡니다.
4가지 버전이 있는 이유는 한지표에 담을수 있는 데이터의 한계 때문에 BINANCE회사의 최대 종목갯수(142)를 초과하기때문입니다.
평상시 컴퓨터가 가능할때는 TPVI를 참고하여 매매를 하시면 되고, 밖에있거나 다른 일을 하고 있을때 텔레그램 알람을 이용하거나 본인이 직접 알람을 걸어 매매에 참고하시면 됩니다.
1. 텔레그램 이용유저의 경우
텔레그램 방에 (1/4),(2/4),(3/4),(4/4) 에서 매집감지 라는 알람이 오면 TPVI ALERT 지표 네가지가 켜져있는 창을 킵니다. 그리고 1/4 ~ 4/4 중 알람이 왔던 창을 확인합니다. 지표의 값이 0이 아닌 코인이 있을겁니다. 사용시 우측 눈금을 우클릭하시고 "지표이름" 은 키시고 "오버래핑 라벨 없음"은 끄시기 바랍니다.
그럼 오른쪽에 지표의 이름이 나올텐데 0쪽에 곂친 지표 말고 다른 지표의 이름을 찾으십시오.
지표들의 값은 중요하지 않습니다. 각각의 값은 알람 on 알람 off에 해당하고 off는 0 on은 해당 지표의 값 입니다.각각의 값이 다른 이유는 해당하는 코인이 모두 같은 값이면 지표상 곂쳐서 시각적으로 확인이 불가능 해 지기 때문입니다.
해당하는 지표의 이름를 TPVI에서 찾고 상승세라면 배팅하십시오.
2. 개인적인 알람을 통해 지표를 사용하는 경우
이 경우 알람추가 -> TPVI ALERT 선택 -> alert! 값 선택 -> -2 보다 작을 경우 선택
이렇게 하면 1, 2, 3, 4 중 해당하는 지표에서 특정 값이 튄 경우(설정가능) 원하는 알람을 걸 수 있습니다.
코인 반등장에 힘입어 누적수익이 어마어마합니다. 여러분들도 수익 즐기시기바랍니다. 감사합니다.
TPVI alert(3/4)a Indicators for using alarms.
It captures a strong buying moment or momentary strong buying.
Basically, it is made for the purpose of catching and trading when the TPVI index is bouncing.
How to use is as follows.
Once you have registered TPVI 1,2,3,4 and TPVI ALERT 1,2,3,4.
The reason why there are four versions is because it exceeds the maximum number of items of BINANCE company (142) due to limit of the data which can be included in the Hanji table.
If you can use your computer on a regular basis, you can use TPVI to trade it. If you are outside or doing something else, you can use a telegram alarm or use your own alarm to refer to the traide.
1. For telegram users
In the telegram room, when the alarm of (1/4), (2/4), (3/4), (4/4) is detected, the TPVI ALERT indicator will bring up the window with four indicators on. And check the window where the alarm came out from 1/4 ~ 4/4. There will be a coin with a non-zero indicator value. Right-click on the right scale and select "Indicator Name" and "No Overlapping Label".You'll see the name of the indicator on the right, but find the name of the indicator other than the one on page 0.
The values of indicators are not important. Each value corresponds to an alarm on alarm off, and off equals 0 on the corresponding indicator.The reason why each value is different is that if all coins are the same, it becomes impossible to visually check them on the surface.Find the name of the relevant indicator on the TPVI and bet if it is rising.
2. When using Indicators through personal alarms
In this case, add an alarm -> select TPVI ALERT -> alert! Select value -> less than -2
This allows you to set the desired alarm if a specific value has sprung from the corresponding indicator of 1, 2, 3, or 4 (configurable).
Cumulative profits are enormous thanks to coin counterparts. Please enjoy your profits as well. Thank you.
TPVI지표의 알람사용을 원할시 필요한 지표입니다.
매집 또는 순간적인 강한 매수증가를 잡아냅니다.
기본적으로 TPVI 지표가 튀어오를떄 잡아내 매매를 하기 위한 목적으로 만들어졌습니다.
사용방법은 다음과 같습니다.
일단 TPVI 1,2,3,4와 TPVI ALERT 1,2,3,4를 등록해둡니다.
4가지 버전이 있는 이유는 한지표에 담을수 있는 데이터의 한계 때문에 BINANCE회사의 최대 종목갯수(142)를 초과하기때문입니다.
평상시 컴퓨터가 가능할때는 TPVI를 참고하여 매매를 하시면 되고, 밖에있거나 다른 일을 하고 있을때 텔레그램 알람을 이용하거나 본인이 직접 알람을 걸어 매매에 참고하시면 됩니다.
1. 텔레그램 이용유저의 경우
텔레그램 방에 (1/4),(2/4),(3/4),(4/4) 에서 매집감지 라는 알람이 오면 TPVI ALERT 지표 네가지가 켜져있는 창을 킵니다. 그리고 1/4 ~ 4/4 중 알람이 왔던 창을 확인합니다. 지표의 값이 0이 아닌 코인이 있을겁니다. 사용시 우측 눈금을 우클릭하시고 "지표이름" 은 키시고 "오버래핑 라벨 없음"은 끄시기 바랍니다.
그럼 오른쪽에 지표의 이름이 나올텐데 0쪽에 곂친 지표 말고 다른 지표의 이름을 찾으십시오.
지표들의 값은 중요하지 않습니다. 각각의 값은 알람 on 알람 off에 해당하고 off는 0 on은 해당 지표의 값 입니다.각각의 값이 다른 이유는 해당하는 코인이 모두 같은 값이면 지표상 곂쳐서 시각적으로 확인이 불가능 해 지기 때문입니다.
해당하는 지표의 이름를 TPVI에서 찾고 상승세라면 배팅하십시오.
2. 개인적인 알람을 통해 지표를 사용하는 경우
이 경우 알람추가 -> TPVI ALERT 선택 -> alert! 값 선택 -> -2 보다 작을 경우 선택
이렇게 하면 1, 2, 3, 4 중 해당하는 지표에서 특정 값이 튄 경우(설정가능) 원하는 알람을 걸 수 있습니다.
코인 반등장에 힘입어 누적수익이 어마어마합니다. 여러분들도 수익 즐기시기바랍니다. 감사합니다.
TPVI alert(2/4)a Indicators for using alarms.
It captures a strong buying moment or momentary strong buying.
Basically, it is made for the purpose of catching and trading when the TPVI index is bouncing.
How to use is as follows.
Once you have registered TPVI 1,2,3,4 and TPVI ALERT 1,2,3,4.
The reason why there are four versions is because it exceeds the maximum number of items of BINANCE company (142) due to limit of the data which can be included in the Hanji table.
If you can use your computer on a regular basis, you can use TPVI to trade it. If you are outside or doing something else, you can use a telegram alarm or use your own alarm to refer to the traide.
1. For telegram users
In the telegram room, when the alarm of (1/4), (2/4), (3/4), (4/4) is detected, the TPVI ALERT indicator will bring up the window with four indicators on. And check the window where the alarm came out from 1/4 ~ 4/4. There will be a coin with a non-zero indicator value. Right-click on the right scale and select "Indicator Name" and "No Overlapping Label".You'll see the name of the indicator on the right, but find the name of the indicator other than the one on page 0.
The values of indicators are not important. Each value corresponds to an alarm on alarm off, and off equals 0 on the corresponding indicator.The reason why each value is different is that if all coins are the same, it becomes impossible to visually check them on the surface.Find the name of the relevant indicator on the TPVI and bet if it is rising.
2. When using Indicators through personal alarms
In this case, add an alarm -> select TPVI ALERT -> alert! Select value -> less than -2
This allows you to set the desired alarm if a specific value has sprung from the corresponding indicator of 1, 2, 3, or 4 (configurable).
Cumulative profits are enormous thanks to coin counterparts. Please enjoy your profits as well. Thank you.
TPVI지표의 알람사용을 원할시 필요한 지표입니다.
매집 또는 순간적인 강한 매수증가를 잡아냅니다.
기본적으로 TPVI 지표가 튀어오를떄 잡아내 매매를 하기 위한 목적으로 만들어졌습니다.
사용방법은 다음과 같습니다.
일단 TPVI 1,2,3,4와 TPVI ALERT 1,2,3,4를 등록해둡니다.
4가지 버전이 있는 이유는 한지표에 담을수 있는 데이터의 한계 때문에 BINANCE회사의 최대 종목갯수(142)를 초과하기때문입니다.
평상시 컴퓨터가 가능할때는 TPVI를 참고하여 매매를 하시면 되고, 밖에있거나 다른 일을 하고 있을때 텔레그램 알람을 이용하거나 본인이 직접 알람을 걸어 매매에 참고하시면 됩니다.
1. 텔레그램 이용유저의 경우
텔레그램 방에 (1/4),(2/4),(3/4),(4/4) 에서 매집감지 라는 알람이 오면 TPVI ALERT 지표 네가지가 켜져있는 창을 킵니다. 그리고 1/4 ~ 4/4 중 알람이 왔던 창을 확인합니다. 지표의 값이 0이 아닌 코인이 있을겁니다. 사용시 우측 눈금을 우클릭하시고 "지표이름" 은 키시고 "오버래핑 라벨 없음"은 끄시기 바랍니다.
그럼 오른쪽에 지표의 이름이 나올텐데 0쪽에 곂친 지표 말고 다른 지표의 이름을 찾으십시오.
지표들의 값은 중요하지 않습니다. 각각의 값은 알람 on 알람 off에 해당하고 off는 0 on은 해당 지표의 값 입니다.각각의 값이 다른 이유는 해당하는 코인이 모두 같은 값이면 지표상 곂쳐서 시각적으로 확인이 불가능 해 지기 때문입니다.
해당하는 지표의 이름를 TPVI에서 찾고 상승세라면 배팅하십시오.
2. 개인적인 알람을 통해 지표를 사용하는 경우
이 경우 알람추가 -> TPVI ALERT 선택 -> alert! 값 선택 -> -2 보다 작을 경우 선택
이렇게 하면 1, 2, 3, 4 중 해당하는 지표에서 특정 값이 튄 경우(설정가능) 원하는 알람을 걸 수 있습니다.
코인 반등장에 힘입어 누적수익이 어마어마합니다. 여러분들도 수익 즐기시기바랍니다. 감사합니다.
TPVI alert(1/4)a Indicators for using alarms.
It captures a strong buying moment or momentary strong buying.
Basically, it is made for the purpose of catching and trading when the TPVI index is bouncing.
How to use is as follows.
Once you have registered TPVI 1,2,3,4 and TPVI ALERT 1,2,3,4.
The reason why there are four versions is because it exceeds the maximum number of items of BINANCE company (142) due to limit of the data which can be included in the Hanji table.
If you can use your computer on a regular basis, you can use TPVI to trade it. If you are outside or doing something else, you can use a telegram alarm or use your own alarm to refer to the traide.
1. For telegram users
In the telegram room, when the alarm of (1/4), (2/4), (3/4), (4/4) is detected, the TPVI ALERT indicator will bring up the window with four indicators on. And check the window where the alarm came out from 1/4 ~ 4/4. There will be a coin with a non-zero indicator value. Right-click on the right scale and select "Indicator Name" and "No Overlapping Label".You'll see the name of the indicator on the right, but find the name of the indicator other than the one on page 0.
The values of indicators are not important. Each value corresponds to an alarm on alarm off, and off equals 0 on the corresponding indicator.The reason why each value is different is that if all coins are the same, it becomes impossible to visually check them on the surface.Find the name of the relevant indicator on the TPVI and bet if it is rising.
2. When using Indicators through personal alarms
In this case, add an alarm -> select TPVI ALERT -> alert! Select value -> less than -2
This allows you to set the desired alarm if a specific value has sprung from the corresponding indicator of 1, 2, 3, or 4 (configurable).
Cumulative profits are enormous thanks to coin counterparts. Please enjoy your profits as well. Thank you.
TPVI지표의 알람사용을 원할시 필요한 지표입니다.
매집 또는 순간적인 강한 매수증가를 잡아냅니다.
기본적으로 TPVI 지표가 튀어오를떄 잡아내 매매를 하기 위한 목적으로 만들어졌습니다.
사용방법은 다음과 같습니다.
일단 TPVI 1,2,3,4와 TPVI ALERT 1,2,3,4를 등록해둡니다.
4가지 버전이 있는 이유는 한지표에 담을수 있는 데이터의 한계 때문에 BINANCE회사의 최대 종목갯수(142)를 초과하기때문입니다.
평상시 컴퓨터가 가능할때는 TPVI를 참고하여 매매를 하시면 되고, 밖에있거나 다른 일을 하고 있을때 텔레그램 알람을 이용하거나 본인이 직접 알람을 걸어 매매에 참고하시면 됩니다.
1. 텔레그램 이용유저의 경우
텔레그램 방에 (1/4),(2/4),(3/4),(4/4) 에서 매집감지 라는 알람이 오면 TPVI ALERT 지표 네가지가 켜져있는 창을 킵니다. 그리고 1/4 ~ 4/4 중 알람이 왔던 창을 확인합니다. 지표의 값이 0이 아닌 코인이 있을겁니다. 사용시 우측 눈금을 우클릭하시고 "지표이름" 은 키시고 "오버래핑 라벨 없음"은 끄시기 바랍니다.
그럼 오른쪽에 지표의 이름이 나올텐데 0쪽에 곂친 지표 말고 다른 지표의 이름을 찾으십시오.
지표들의 값은 중요하지 않습니다. 각각의 값은 알람 on 알람 off에 해당하고 off는 0 on은 해당 지표의 값 입니다.각각의 값이 다른 이유는 해당하는 코인이 모두 같은 값이면 지표상 곂쳐서 시각적으로 확인이 불가능 해 지기 때문입니다.
해당하는 지표의 이름를 TPVI에서 찾고 상승세라면 배팅하십시오.
2. 개인적인 알람을 통해 지표를 사용하는 경우
이 경우 알람추가 -> TPVI ALERT 선택 -> alert! 값 선택 -> -2 보다 작을 경우 선택
이렇게 하면 1, 2, 3, 4 중 해당하는 지표에서 특정 값이 튄 경우(설정가능) 원하는 알람을 걸 수 있습니다.
코인 반등장에 힘입어 누적수익이 어마어마합니다. 여러분들도 수익 즐기시기바랍니다. 감사합니다.
FIB Band Signals with RSI FilterOriginal Author: Rashad
Added by Rashad 6-26-16
These Bollinger bands feature Fibonacci retracements to very clearly show areas of support and resistance . The basis is calculate off of the Volume Weighted Moving Average . The Bands are 3 standard deviations away from the mean. 99.73% of observations should be in this range.
Updated by Dysrupt 7-12-18
-Buy signals added on lower bands, mean and upper 3 bands
-Sell signals added to upper 3 bands
-RSI filter applied to signals
-Alerts not yet added
-Long Biased
NOTE: This is NOT a set and forget signal indicator. It is extremely versatile for all environments by adjusting the RSI filter and checking the band signals needed for the current trend and trading style.
Donchian Mean Reversion AlertsDonchian Channels mean reversion signals/alerts with RSI filtering with signals applied to the mean, for strong trend situations.
Original Author: ChrisMoody
Modified Donchonian Channel with separate adjustments for upper and lower levels
Purpose is if you expect big move up, Use lower input example 3 or 4, and longer lower input, 40 - 100 and use lower input line as a stop out
Opposite if you expect big move down
Mid Line Rule in Long Example. If lower line is below entry take partial profits at Mid Line and move stop to Break even.
If Lower line moves above entry price before price retraces to midline use Lower line as Stop...Opposite if Shorting
Created by user ChrisMoody 1-30-2014
Updated 7-11-2018 by Dysrupt
Revamped for mean reversion strategy
Created midline alerts for strong trending upside buy signals/downside sell signals.
Added RSI Filtering
Added Alerts
Removed bar color change
VWAP Alerts V2Alerts added to "VWAP Stdev Bands v2" by SandroTurriate
Changes
-Adjusted trigger conditions for higher signal sensitivity
-Color change on bands and signals for better readability and ease on the eyes
-Alerts added for up to 4 deviations up and down
-Re-enabled deviations 4 and 5
-Re-enabled previous close
TH Positional | Buy & Sell Levels Monthly ViewTradersHunt's Positional Indicator is designed for Intraday or Monthly Positional Trading for Indian Market but it can also be used for Global Markets and Commodities . It is based on Support & Resistance Levels as per Historical Data.
The details are as follows;
Orange line is Trendsetter which means price closing above or below it will take the instrument in that direction. Green Level indicates strong buy price, and Orange level can be used as SL if trader is taking long position. Basically, a trader can use these levels as best Support and Resistance levels based on the ORB selected.
visit our website www.tradershunt.com for more information.
TH Trend | Trend Levels for the WeekTradersHunt's Trend Indicator is designed for Intraday or Weekly Positional Trading for Indian Market but it can also be used for Global Markets and Commodities . It is based on Support & Resistance Levels as per Historical Data.
The details are as follows;
Orange line is Trendsetter which means price closing above or below it will take the instrument in that direction. Green Level indicates strong buy price, and Orange level can be used as SL if trader is taking long position. Basically, a trader can use these levels as best Support and Resistance levels based on the ORB selected.
visit our website www.tradershunt.com for more information.
TH ORB | Buy & Sell Levels Based on ORBTradersHunt's ORB Indicator is designed for Intraday Trading for Indian Market but it can also be used for Global Markets and Commodities . It is based on Support & Resistance Levels based on Opening Range Technique. User can select different ORB ranges like 1min, 10min, 15/30/45min, 1/2/3 HOUR etc.
The details are as follows;
Orange line is Trendsetter which means price closing above or below it will take the instrument in that direction. Green Level indicates strong buy price, and Orange level can be used as SL if trader is taking long position. Basically, a trader can use these levels as best Support and Resistance levels based on the ORB selected.
visit our website www.tradershunt.com for more information.
CandlestickPatternsIf moving average SMA (green line) crosses above SMA (red line) is uptrend , stock price will move up gradually. If suppose moving average SMA (green line) crosses below SMA (red line) is downtrend, stock price will move down. Also please validate with MACD & RSI for reference will get more clarification.
The default script have:
1) Bollinger Bands
2) Moving Average
3) Buy & Sell Signals
4) Engulfing patterns (like Doji , Bearish Harami, Bullish Harami, Bearish Engulfing , Bullish Engulfing , Piercing Line, Bullish Belt, Bullish Kicker, and Bearish Kicker)
The Piercing Line, Bullish Belt, and the Kickers will usually show up better in the daily charts.
