J12Matic Builder by galgoomA flexible Renko/tick strategy that lets you choose between two entry engines (Multi-Source 3-way or QBand+Moneyball), with a unified trailing/TP exit engine, NY-time trading windows with auto-flatten, daily profit/loss and trade-count limits (HALT mode), and clean webhook routing using {{strategy.order.alert_message}}.
Highlights
Two entry engines
Multi-Source (3): up to three long/short sources with Single / Dual / Triple logic and optional lookback.
QBand + Moneyball: Gate → Trigger workflow with timing windows, OR/AND trigger modes, per-window caps, optional same-bar fire.
Unified exit engine: Trailing by Bricks or Ticks, plus optional static TP/SL.
Session control (NY time): Evening / Overnight / NY Session windows; auto-flatten at end of any enabled window.
Day controls: Profit/Loss (USD) and Trade-count limits. When hit, strategy HALTS new entries, shows an on-chart label/background.
Alert routing designed for webhooks: Every order sets alert_message= so you can run alerts with:
Condition: this strategy
Notify on: Order fills only
Message: {{strategy.order.alert_message}}
Default JSONs or Custom payloads: If a Custom field is blank, a sensible default JSON is sent. Fill a field to override.
How to set up alerts (the 15-second version)
Create a TradingView alert with this strategy as Condition.
Notify on: Order fills only.
Message: {{strategy.order.alert_message}} (exactly).
If you want your own payloads, paste them into Inputs → 08) Custom Alert Payloads.
Leave blank → the strategy sends a default JSON.
Fill in → your text is sent as-is.
Note: Anything you type into the alert dialog’s Message box is ignored except the {{strategy.order.alert_message}} token, which forwards the payload supplied by the strategy at order time.
Publishing notes / best practices
Renko users: Make sure “Renko Brick Size” in Inputs matches your chart’s brick size exactly.
Ticks vs Bricks: Exit distances switch instantly when you toggle Exit Units.
Same-bar flips: If enabled, a new opposite signal will first close the open trade (with its exit payload), then enter the new side.
HALT mode: When day profit/loss limit or trade-count limit triggers, new entries are blocked for the rest of the session day. You’ll see a label and a soft background tint.
Session end flatten: Auto-closes positions at window ends; these exits use the “End of Session Window Exit” payload.
Bar magnifier: Strategy is configured for on-close execution; you can enable Bar Magnifier in Properties if needed.
Default JSONs (used when a Custom field is empty)
Open: {"event":"open","side":"long|short","symbol":""}
Close: {"event":"close","side":"long|short|flat","reason":"tp|sl|flip|session|limit_profit|limit_loss","symbol":""}
You can paste any text/JSON into the Custom fields; it will be forwarded as-is when that event occurs.
Input sections — user guide
01) Entries & Signals
Entry Logic: Choose Multi-Source (3) or QBand + Moneyball (pick one).
Enable Long/Short Signals: Master on/off switches for entering long/short.
Flip on opposite signal: If enabled, a new opposite signal will close the current position first, then open the other side.
Signal Logic (Multi-Source):
Single: any 1 of the 3 sources > 0
Dual: Source1 AND Source2 > 0
Triple (default): 1 AND 2 AND 3 > 0
Long/Short Signal Sources 1–3: Provide up to three series (often indicators). A positive value (> 0) is treated as a “pulse”.
Use Lookback: Keeps a source “true” for N bars after it pulses (helps catch late triggers).
Long/Short Lookback (bars): How many bars to remember that pulse.
01b) QBands + Moneyball (Gate -> Trigger)
Allow same-bar Gate->Trigger: If ON, a trigger can fire on the same bar as the gate pulse.
Trigger must fire within N bars after Gate: Size of the gate window (in bars).
Max signals per window (0 = unlimited): Cap the number of entries allowed while a gate window is open.
Buy/Sell Source 1 – Gate: Gate pulse sources that open the buy/sell window (often a regime/zone, e.g., QBands bull/bear).
Trigger Pulse Mode (Buy/Sell): How to detect a trigger pulse from the trigger sources (Change / Appear / Rise>0 / Fall<0).
Trigger A/B sources + Extend Bars: Primary/secondary triggers plus optional extension to persist their pulse for N bars.
Trigger Mode: Pick S2 only, S3 only, S2 OR S3, or S2 AND S3. AND mode remembers both pulses inside the window before firing.
02) Exit Units (Trailing/TP)
Exit Units: Choose Bricks (Renko) or Ticks. All distances below switch accordingly.
03) Tick-based Trailing / Stops (active when Exit Units = Ticks)
Initial SL (ticks): Starting stop distance from entry.
Start Trailing After (ticks): Start trailing once price moves this far in your favor.
Trailing Distance (ticks): Offset of the trailing stop from peak/trough once trailing begins.
Take Profit (ticks): Optional static TP distance.
Stop Loss (ticks): Optional static SL distance (overrides trailing if enabled).
04) Brick-based Trailing / Stops (active when Exit Units = Bricks)
Renko Brick Size: Must match your chart’s brick size.
Initial SL / Start Trailing After / Trailing Distance (bricks): Same definitions as tick mode, measured in bricks.
Take Profit / Stop Loss (bricks): Optional static distances.
05) TP / SL Switch
Enable Static Take Profit: If ON, closes the trade at the fixed TP distance.
Enable Static Stop Loss (Overrides Trailing): If ON, trailing is disabled and a fixed SL is used.
06) Trading Windows (NY time)
Use Trading Windows: Master toggle for all windows.
Evening / Overnight / NY Session: Define each session in NY time.
Flatten at End of : Auto-close any open position when a window ends (sends the Session Exit payload).
07) Day Controls & Limits
Enable Profit Limits / Profit Limit (Dollars): When daily net PnL ≥ limit → auto-flatten and HALT.
Enable Loss Limits / Loss Limit (Dollars): When daily net PnL ≤ −limit → auto-flatten and HALT.
Enable Trade Count Limits / Number of Trades Allowed: After N entries, HALT new entries (does not auto-flatten).
On-chart HUD: A label and soft background tint appear when HALTED; a compact status table shows Day PnL, trade count, and mode.
08) Custom Alert Payloads (used as strategy.order.alert_message)
Long/Short Entry: Payload sent on entries (if blank, a default open JSON is sent).
Regular Long/Short Exit: Payload sent on closes from SL/TP/flip (if blank, a default close JSON is sent).
End of Session Window Exit: Payload sent when any enabled window ends and positions are flattened.
Profit/Loss/Trade Limit Close: Payload sent when daily profit/loss limit causes auto-flatten.
Tip: Any tokens you include here are forwarded “as is”. If your downstream expects variables, do the substitution on the receiver side.
Known limitations
No bracket orders from Pine: This strategy doesn’t create OCO/attached brackets on the broker; it simulates exits with strategy logic and forwards your payloads for external automation.
alert_message is per order only: Alerts fire on order events. General status pings aren’t sent unless you wire a separate indicator/alert.
Renko specifics: Backtests on synthetic Renko can differ from live execution. Always forward-test on your instrument and settings.
Quick checklist before you publish
✅ Brick size in Inputs matches your Renko chart
✅ Exit Units set to Bricks or Ticks as you intend
✅ Day limits/Windows toggled as you want
✅ Custom payloads filled (or leave blank to use defaults)
✅ Your alert uses Order fills only + {{strategy.order.alert_message}}
نماذج فنيه
Auto Fibonacci Extension Pro Strategy – Smart Risk/Reward✨ Auto Fibonacci Extension Pro Strategy is a next-generation trading system that combines automatic Fibonacci extensions with professional risk management and backtesting features.
This strategy is designed for traders who want to trade with precision using Fibonacci levels without manually drawing them every time.
🔑 Key Features:
✅ Automatic Fibonacci Extension Mapping (0.618, 1.0, 1.272, 1.618, 2.618).
✅ Pro Entry & Exit Signals at golden zones.
✅ Dynamic Position Sizing based on risk percentage.
✅ Stop Loss & Take Profit levels with custom Risk/Reward ratio.
✅ Long & Short Trade Signals with chart markers.
✅ Backtesting Ready – optimize settings for any market (Forex, Crypto, Stocks, Indices).
✅ Clean Visuals with auto-plotted fib levels.
📊 How It Works:
Detects swing highs & lows automatically.
Draws Fibonacci extensions forward.
Generates buy/sell signals when price confirms at fib levels.
Places SL at last swing and TP at fib extension target.
Applies risk-based position sizing to protect your account.
⚡ Best Use Cases:
Works on all timeframes (scalping to swing trading).
Effective for Forex, Crypto, Stocks & Indices.
Use alongside trend filters (MA, RSI, Volume) for extra confirmation.
📢 Pro Tip: Backtest on multiple markets & timeframes, then fine-tune your Swing Length and Risk/Reward Ratio for maximum performance.
🔥 Shared Success, Trusted Growth – This strategy is built for traders who want to combine discipline, automation, and professional risk management into one powerful trading tool.
MuLegend's Break & Retest StrategyThis strategy was produced to help traders who trade NQ: win! try it out on a demo, see how you like and happy trading!! Works well if you are a break & retest trader!!!
MuMu
@atltime2shine on IG
ICT Unicorn Strategy [RoboQuant]What it detects
Structure: uses pivots (ta.pivothigh/low) to build a mini zigzag (A–B–C–D).
“Unicorn” Pattern:
Bull: bullish direction, C below A (protected swing), with a bullish “BRB” candle at B.
Bear: mirrored version.
FVG: searches for a valid gap between candle i and i+2 inside the BRB candle range and greater than 0.05 × ATR (quality filter).
When an FVG appears, it plots boxes/lines (top/bottom of range, protected swing, FVG box).
How it enters
Bull Trigger: a candle opens inside the FVG and closes above the top of the FVG (mitigation + continuation).
SL = protected swing (firstBl.swing, pivot C).
TP = top + (top - swing) * (reward/risk).
Draws Risk and Reward boxes if showTargets=true.
Bear Trigger: mirror setup (opens inside FVG and closes below bottom).
Management & sizing
Sizing: calculates position size = riskAmount / SL distance, capped by maxPositionSize.
RR configurable with risk and reward (default 1:2).
Trailing optional: adjusts TsL using short pivots (lenS).
Trade closes at SL (break of swing) or TP (target reached).
combine: if false, a bull setup cancels a bear setup (and vice versa). If true, both can coexist.
Key parameters
len: pivot sensitivity (structure).
riskAmount and maxPositionSize: risk control.
trail, lenS: trailing logic.
Box colors/visibility (showTargets, colRisk, colReward).
ICT translation
Seeks impulse → FVG → pullback into FVG → expansion, with a protected swing (implicit BOS/MSS via zigzag) and mitigation of imbalance.
The ATR * 0.05 filter avoids micro-gaps without intent.
How I’d use it (quick checklist)
Mark HTF bias (only take bull or bear setups with the trend).
On LTF, wait for a valid FVG inside the BRB candle.
Enter only if a candle re-enters the FVG and closes breaking its edge.
SL at swing C, TP by RR (default 1:2).
Enable trailing only after 1R is reached (optional, tuned via lenS).
Quarterly-Inspired EMA Swing Strategy🚀 Quarterly EMA Strategy: Simplified
This strategy uses quarterly trends and pullbacks to EMAs (Exponential Moving Averages) to buy low and sell high in strong uptrends (longs) or short weak stocks in strong downtrends.
⸻
🔧 Core Setup
• Timeframe: Quarterly (1 candle = 3 months or ~65 trading days).
• Stocks: Liquid NSE F&O stocks (e.g., Reliance, Bajaj Finance, Tata Motors, etc.).
• Indicators Used:
• 10-quarter EMA → Shorter-term trend.
• 21-quarter EMA → Long-term trend.
• 13-week EMA → Weekly confirmation.
• ATR → For stop-loss.
• VIX → Volatility control.
• Relative Strength vs Nifty → Filter strong/weak stocks.
⸻
🟢 LONG SETUP (Buy on Pullback in Uptrend)
✅ Conditions:
1. Quarterly Trend is Bullish
Price > 10Q EMA > 21Q EMA
2. Pullback Happens
Price closes within 3% of 10Q or 21Q EMA, or touches it and bounces.
• E.g., Stock close = 8200, 10Q EMA = 8000 → Pullback = Valid (2.5% gap)
3. Previous Trend is Strong
• Last 1-2 quarters were making higher highs OR closing well above 10Q EMA
4. Candle Shows Rejection
• Lower wick (buying pressure from EMA)
• Small body (<5% total candle range)
5. Market Support Filters
• Nifty > its 4-quarter EMA (sloping upward)
• India VIX < 20 (low panic)
• Stock’s last 2 quarters’ return > 1.1× Nifty’s return
6. Weekly Confirmation
• Price > 13-week EMA
• 13W EMA is rising
• Bullish pattern in last 2 candles
• Volume ≥ 75% of 20-week average
⸻
📈 Example (Bajaj Finance):
• Close: 8200,
• 10Q EMA: 8000 (bullish),
• 21Q EMA: 7800
• Weekly price > 13W EMA → Confirmation ✅
⸻
🎯 Trade Plan (Long):
• Entry: 8200 (Quarterly) or near 13W EMA (Weekly)
• Stop-Loss: 2× ATR below 21Q EMA or candle low
• Target: 2:1 reward
• Exit 1: Book 50% at target
• Exit 2: Trail 21Q EMA
• Optional Hedge: Buy Nifty PUT if VIX > 15
⸻
🔴 SHORT SETUP (Sell on Pullback in Downtrend)
✅ Conditions:
1. Quarterly Trend is Bearish
Price < 10Q EMA < 21Q EMA
2. Pullback to EMA
Price closes within 3% of 10Q or 21Q EMA, or touches and gets rejected
3. Prior Trend is Down
Last 1-2 quarters had lower lows or closing >5% below 10Q EMA
4. Bearish Candle Setup
• Upper wick (rejection from EMA)
• Small body
5. Market Support Filters
• Nifty < its 4-quarter EMA (sloping down)
• India VIX < 20
• Stock’s 2-quarter return < 0.9× Nifty’s return
6. Weekly Confirmation
• Price < 13-week EMA
• 13W EMA is falling
• Bearish candles (engulfing, lower highs)
• Volume ≥ 75% of 20-week average
⸻
📉 Example (Vodafone Idea):
• Close: ₹8
• 10Q EMA: ₹8.2 → Close is 2.5% below
• Weekly close < 13W EMA
• Bearish candle → Confirmation ✅
⸻
🔻 Trade Plan (Short):
• Entry: 8
• Stop-Loss: 2× ATR above 21Q EMA or candle high
• Target: 2:1 reward
• Exit 1: Book 50% at target
• Exit 2: Trail 21Q EMA
• Optional Hedge: Buy Nifty CALL if VIX > 15
⸻
📊 Position Sizing (Same for Long & Short):
• Risk per trade: 0.5–1% of total capital
• Example:
• Capital = ₹10 lakh
• Risk = ₹10,000
• Stop = 800 points → Buy 12 shares
⸻
✅ Exit Rules Summary
Setup Cripto EMA + Volume//@version=5 indicator("Sinais Multi-Cripto – EMA+Volume (BTC/ETH/BNB/SOL/XRP)", overlay=false)
// Inputs emaFast = input.int(50, "EMA Curta") emaSlow = input.int(200, "EMA Longa") emaPull = input.int(20, "EMA Pullback") volLen = input.int(20, "Média Volume")
symBTC = input.symbol(defval="BINANCE:BTCUSDT", title="BTC") symETH = input.symbol(defval="BINANCE:ETHUSDT", title="ETH") symBNB = input.symbol(defval="BINANCE:BNBUSDT", title="BNB") symSOL = input.symbol(defval="BINANCE:SOLUSDT", title="SOL") symXRP = input.symbol(defval="BINANCE:XRPUSDT", title="XRP")
f_sig(sym) => c = request.security(sym, timeframe.period, close) v = request.security(sym, timeframe.period, volume) e50 = ta.ema(c, emaFast) e200 = ta.ema(c, emaSlow) e20 = ta.ema(c, emaPull) vma = ta.sma(v, volLen) long = (e50 > e200) and (c > e20) and (v > vma) short = (e50 < e200) and (c < e20) and (v > vma)
= f_sig(symBTC) = f_sig(symETH) = f_sig(symBNB) = f_sig(symSOL) = f_sig(symXRP)
// Exibição plotchar(btcL, title="BTC Long", char="▲", location=location.top) plotchar(btcS, title="BTC Short", char="▼", location=location.bottom) plotchar(ethL, title="ETH Long", char="▲", location=location.top) plotchar(ethS, title="ETH Short", char="▼", location=location.bottom) plotchar(bnbL, title="BNB Long", char="▲", location=location.top) plotchar(bnbS, title="BNB Short", char="▼", location=location.bottom) plotchar(solL, title="SOL Long", char="▲", location=location.top) plotchar(solS, title="SOL Short", char="▼", location=location.bottom) plotchar(xrpL, title="XRP Long", char="▲", location=location.top) plotchar(xrpS, title="XRP Short", char="▼", location=location.bottom)
Lunar calendar day Crypto Trading StrategyLunar calendar day Crypto Trading Strategy
This strategy explores the potential impact of the lunar calendar on cryptocurrency price cycles.
It implements a simple but unconventional rule:
Buy on the 5th day of each lunar month
Sell on the 26th day of the lunar month
No trades between January 1 (solar) and Lunar New Year’s Day (holiday buffer period)
Research background
Several academic studies have investigated the influence of lunar cycles on financial markets. Their findings suggest:
Returns tend to be higher around the full moon compared to the new moon.
Periods between the full moon and the waning phase often show stronger average returns than the waxing phase.
This strategy combines those observations into a practical implementation by testing fixed entry (lunar day 5) and exit (lunar day 26) points, while excluding the transition period from solar New Year to Lunar New Year, effectively capturing mid-month lunar effects.
How it works
The script includes a custom lunar date calculation function, reconstructing lunar months and days for each year (2020–2026).
On lunar day 5, the strategy opens a long position with 100% of equity.
On lunar day 26, the strategy closes the position.
No trades are executed between Jan 1 and Lunar New Year’s Day.
All trades include:
Commission: 0.1%
Slippage: 3 ticks
Position sizing uses the entire equity (100%) for simplicity, but this is not recommended for live trading.
Why this is original
Unlike mashups of built-in indicators, this script:
Implements a full lunar calendar system inside Pine Script.
Translates academic findings on lunar effects into an applied backtest.
Adds a realistic trading filter (holiday gap) based on cultural/seasonal calendar rules.
Provides researchers and traders with a framework to explore non-traditional, time-based signals.
Notes
This is an experimental, research-oriented strategy, not financial advice.
Results are highly dependent on the chosen period (2020–2026).
Using 100% equity per trade is for simplification only and is not a viable money management practice.
The purpose is to investigate whether cyclical patterns linked to lunar time can provide any statistical edge in ETHUSDT.
MTF RSI + ADX + ATR SL/TP vivekDescription:
This strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
MTF RSI + ADX + ATR SL/TPThis strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
Parabolic SAR Trend Following - Black GUIA Parabolic SAR-based strategy that buys when the SAR dots are below the price and sells when they are above.
The strategy uses a black-themed GUI for better visibility.
You can customize the input parameters for the SAR calculation.
This strategy is effective for trending markets.
Always backtest the strategy before applying it to live trading.
Visit - for more such strategies.
MACD Signal Line Crossover - Black GUIA MACD-based strategy that buys when the MACD line crosses above the signal line and sells when it crosses below.
The strategy uses a black-themed GUI for better visibility.
You can customize the lengths of the MACD and signal line using the input parameters.
This strategy is effective for identifying trend changes and momentum shifts in the market.
Always backtest the strategy before applying it to live trading.
Visit - for more such strategies.
VWAP Executor — v6 (VWAP fix)tarek helishPractical scalping plan with high-rate (sometimes reaching 70–85% in a quiet market)
Concept: “VWAP bounce with a clear trend.”
Tools: 1–3-minute chart for entry, 5-minute trend filter, VWAP, EMA(50) on 5M, ATR(14) on 1M, volume.
When to trade: London session or early New York session; avoid 10–15 minutes before/after high-impact news.
Entry rules (buy for example):
Trend: Price is above the EMA(50) on 5M and has an upward trend.
Entry zone: First bounce to VWAP (or a ±1 standard deviation channel around it).
Signal: Bullish rejection/engulfing candle on 1M with increasing volume, and RSI(2) has exited oversold territory (optional).
Order: Entry after the confirmation candle closes or a limit close to VWAP.
Trade Management:
Stop: Below the bounce low or 0.6xATR(1M) (strongest).
Target: 0.4–0.7xATR(1M) or the previous micro-high (small return to increase success rate).
Trigger: Move the stop to breakeven after +0.25R; close manually if the 1M candle closes strongly against you.
Filter: Do not trade if the spread widens, or the price "saws" around VWAP without a trend.
Sell against the rules in a downtrend.
Why this plan raises the heat-rate? You buy a "small discount" within an existing trend and near the institutional average price (VWAP), with a small target price.
مواقعي شركة الماسة للخدمات المنزلية
شركة تنظيف بالرياض
نقل عفش بالرياض
AYUSH ALGO TRAGING STRATEGY TEST VERSION 1)Very good strategy , it uses two moving avg crossovers and also rsi and atr for confirmation, this strategy is fully automated
