RSI Divergence Filtered by ZigZag RatiosRSI Divergence Filtered by ZigZag Ratios
This indicator is designed to help traders identify potential trend reversals by finding RSI divergence and then confirming it with a unique filter based on price movements. It draws two ZigZag lines on your chart to visually represent these patterns.
Core Functionality
The indicator works by doing three main things:
Price ZigZag (Blue Line): ZigZag line directly on the price chart. This line connects the significant high and low points of the price action, based on the ZigZag Deviation % you set. It's a way to simplify the trend and clearly see the "legs" or swings of the market.
RSI ZigZag (Orange Line): It also draws a separate ZigZag line, colored orange, that follows the movement of the RSI indicator. This helps you visually track the highs and lows of the RSI at the same time as the price.
Divergence Detection: The indicator continuously looks for divergence between the price ZigZag and the RSI.
The Key Filter: ZigZag Ratio
This is what makes the indicator unique. When a potential divergence is found, it doesn't just display a signal immediately. It performs an extra check:
It compares the size of the most recent price swing (the "last leg") to the size of the previous swing in the same direction. It then calculates a ratio. If the most recent swing is significantly smaller than the previous one, it confirms the signal and displays a label.
This filtering mechanism aims to weed out weak signals and highlight divergences that occur after a period of slowing momentum.
Bullish/Bearish Div Labels: When a valid, filtered divergence is found, the indicator will place a green Bullish Div label at the bottom of a low swing or a red Bearish Div label at the top of a high swing.
User Inputs
ZigZag Deviation %: This is the minimum percentage change required to form a new ZigZag pivot. The default value is set to 0.3618, which is a popular number in technical analysis. A lower value will capture more minor swings, while a higher value will focus only on larger, more significant ones.
RSI Length: The number of bars used to calculate the RSI. The default is 6, but you can adjust this to your preference.
نماذج فنيه
MACD Signal Line Crossover - Black GUIA MACD-based strategy that buys when the MACD line crosses above the signal line and sells when it crosses below.
The strategy uses a black-themed GUI for better visibility.
You can customize the lengths of the MACD and signal line using the input parameters.
This strategy is effective for identifying trend changes and momentum shifts in the market.
Always backtest the strategy before applying it to live trading.
Visit - for more such strategies.
RSI Overbought/Oversold - Black GUIAn RSI-based strategy that buys when the RSI drops below 30 (indicating oversold conditions) and sells when it rises above 70 (indicating overbought conditions).
The strategy features a black-themed GUI for enhanced visibility. You can adjust the RSI length using the input parameter.
This strategy is useful for identifying potential reversal points in the market.
Always backtest the strategy before applying it to live trading.
Visit - for more such strategies.
Rbpov1 – Opening Range Multi-Actifs Final📌 Strategy Bio – Rbpov1 Opening Range Pro
🎯 Core Concept
The Rbpov1 Opening Range Pro is an advanced algorithmic trading system built around the opening range breakout concept.
It is based on the observation that, after a period of consolidation (the opening range), markets often generate strong directional moves once the range is broken.
This strategy is designed to be multi-asset (Forex, indices, commodities, crypto) and multi-timeframe, with the following key principles:
A reference range (default: 03:00 → 06:00 UTC+2, customizable).
Trade entries are taken only after the range closes.
Smart filtering (trend, volatility, volume) to reduce false signals.
Strict risk management in USD, with Stop Loss and Take Profit defined in multiples of R.
Automatic end-of-day flat rule: all positions are closed by session end.
⚙️ Filters & Conditions
🔹 1. Trend Filter (EMA HTF)
A 21-period EMA is applied to a higher timeframe (default: H4).
If price is above EMA, only longs are allowed.
If price is below EMA, only shorts are allowed.
👉 This aligns intraday trades with the dominant trend.
🔹 2. Volatility Filter (ATR)
Uses a 14-period ATR to validate range conditions.
Opening range is valid only if:
Range > minATR × ATR
Range < maxATR × ATR
Default: minATR = 0.2, maxATR = 6.0.
👉 Filters out noise (tiny ranges) or overextended volatility.
🔹 3. Volume Filter (Optional)
Breakout candle must show higher volume than the average (default SMA 20).
Prevents low-liquidity breakouts.
🔹 4. Session & Trading Rules
No trades during weekends (Forex).
Maximum X trades per day (default: 2).
Positions are force-closed at EOD (default: 19:00 UTC+2).
💰 Risk Management
Dynamic position sizing in USD (capital × risk%).
Stop Loss automatically set at the opposite side of the range (with optional buffer).
Take Profit in multiples of R (default: 1.5R).
Equity-based recalculation ensures consistency as account grows.
📊 Key Benefits
✅ Professional and modular architecture.
✅ Works across Forex, indices, gold, and crypto.
✅ Smart filtering for cleaner signals.
✅ Robust and consistent risk management.
✅ Automatic end-of-day flattening (no overnight risk).
✅ Modern and visual dashboard interface for readability.
🏆 Use Cases
Forex (USD/JPY, EUR/USD, GBP/USD) → Asian session ranges.
Indices (NAS100, US30, DAX) → NYSE opening ranges.
Gold (XAU/USD) → Tokyo or pre-London ranges.
Crypto (BTC, ETH) → Tailored to volatility peaks.
VWAP Executor — v6 (VWAP fix)tarek helishPractical scalping plan with high-rate (sometimes reaching 70–85% in a quiet market)
Concept: “VWAP bounce with a clear trend.”
Tools: 1–3-minute chart for entry, 5-minute trend filter, VWAP, EMA(50) on 5M, ATR(14) on 1M, volume.
When to trade: London session or early New York session; avoid 10–15 minutes before/after high-impact news.
Entry rules (buy for example):
Trend: Price is above the EMA(50) on 5M and has an upward trend.
Entry zone: First bounce to VWAP (or a ±1 standard deviation channel around it).
Signal: Bullish rejection/engulfing candle on 1M with increasing volume, and RSI(2) has exited oversold territory (optional).
Order: Entry after the confirmation candle closes or a limit close to VWAP.
Trade Management:
Stop: Below the bounce low or 0.6xATR(1M) (strongest).
Target: 0.4–0.7xATR(1M) or the previous micro-high (small return to increase success rate).
Trigger: Move the stop to breakeven after +0.25R; close manually if the 1M candle closes strongly against you.
Filter: Do not trade if the spread widens, or the price "saws" around VWAP without a trend.
Sell against the rules in a downtrend.
Why this plan raises the heat-rate? You buy a "small discount" within an existing trend and near the institutional average price (VWAP), with a small target price.
مواقعي شركة الماسة للخدمات المنزلية
شركة تنظيف بالرياض
نقل عفش بالرياض
권재용AI 업데이트 버전한 줄 압축: ‘추세,수급,변동성의 교집합에서만 거래하게 강제하는 보조지표 만듦
-슈퍼트렌드에 다중TF·수급·레짐 합의점수 얹어 재도색 없이 ‘자리 좋은’ 신호만 뽑는 엔진 만듦
-Flip·Pullback을 켈트너·RSI·OBV/MFI·ADX로 교차검증해 노이즈 싹 걷어내는 NRP 신호 설계함
-추세판단→엔트리→S/R·VWAP 컨텍스트→TP/SL·알림까지 지표 하나로 풀스택 자동화함
-상위TF 확정봉+ATR 레짐+EMA 정렬로 허접 및 가짜 신호 전부 필터링하고 남은 것만 화살표로 뽑게 만듦
-트렌드·수급·변동성 3요소를 점수화해 신호 질·빈도 동시에 컨트롤하는 합의형 엔진 제작함
-NRP ST에 S/R 존과 앵커 VWAP 붙여 ‘보이는 자리만’ 눌러 담게 만드는 실전형 지표임
-알고리즘이 허락하고 사람은 자리만 고르게 만드는 엔트리 시스템으로 구조 갈아엎음
-Flip+Pullback을 ‘의미 있는 눌림/돌파’만 통과시키는 확률적 알고리즘임
-신호 뜨면 TP/SL/시간청산까지 경로가 자동 깔리는 엔드투엔드 트레이딩 레일 만들었음
-케이스 바이 케이스를 규칙으로 압축해 클릭 전에 이미 선별 끝내는 지표임
-빈도는 살리고(Flip+PB) 질은 점수로 묶은, 레버리지 장에서도 버티는 엔진임
0) 보조지표 구분
초록 굵은 선 = 상승 추세(롱 바이어스)
빨강 굵은 선 = 하락 추세(숏 바이어스)
청록 채움 = 지지 존(S1~S3)
적갈 채움 = 저항 존(R1~R3)
주황 실선 + 연한 띠 = 앵커 VWAP + 밴드
파랑/보라 얇은 선 = 전일/전주 고저
초록/빨강 라벨 = 권재용 B/S 신호
회색 선 = TP1/TP2, 검정 선 = SL 가이드
옅은 노랑 배경 = 신호 직후 경계 구간
1) 사용법(초보→중급→고급)
A) 초보자(그대로 따라 하기)
보는 법:
ST 색 먼저 봄(초록=롱, 빨강=숏). 상위TF(4H) 같은 방향인지 확인함.
화살표 뜨면 후보. 바로 위/아래 S/R 존·앵커 VWAP 있는지 확인.
저항 겹치면 롱 지연/축소, 지지 겹치면 숏 지연/축소.
진입:
Flip 신호면 추세 시작 자리.
Pullback 신호면 눌림/반등 자리(켈트너+RSI 재진입 충족).
청산:
TP1에서 절반, TP2에서 나머지(취향).
SL은 가이드 라인 참조하되 실제 손절은 주문으로 확정함.
알림: BUY/SELL만 봉 마감으로 켜두면 충분함.
B) 중급자(필터/점수로 빈도·질 조절)
빈도 늘리고 싶음: preset=공격적 또는 scoreExtra=-0.5, cooldownBars=0~1, minDistATR=0~0.2, adxMin=18~20, atrZmin=0.0/atrZmax=1.0
질 올리고 싶음: preset=보수적, scoreExtra=+0.5~+1.0, cooldownBars≥3, minDistATR=0.3~0.5, adxMin=22~25, chopMax=50
주의: OBV/MFI 끄면 최대점수 1점임. 중립(3)/보수(4)로 두면 신호 안 뜸 → 프리셋 낮추거나 OBV/MFI 켬.
C) 고급자(레짐·TF·자금관리)
레짐 매핑:
추세장: adxMin↑, chopMax↓, minDistATR↑(추격 줄임)
박스장: useCHOP=OFF 고려, kelMult↑로 밴드 넓혀 과매수/과매도만 노림
TF 분리 운용:
엔트리 5/15m + confTF=60m(1H)로 더 타이트하게 확정
스윙이면 res="", confTF="D" / confirmBars=1~2
앵커 VWAP: Flip마다 리셋됨. 추세 추종이면 VWAP 위 롱/아래 숏 기본. 역추세는 밴드 터치→재관통만 부분 진입.
3) 목적별 프리셋(붙여 쓰기)
스캘핑(신호 많게, 1~5m)
entryMode=Flip+Pullback
preset=공격적 또는 중립 + scoreExtra=-0.5
adxMin=18~20, cooldownBars=0~1, minDistATR=0~0.2
atrZmin=0.0 / atrZmax=1.0, chopMax=58~60
청산: tp1ATR=0.6~0.8, tp2ATR=1.2~1.6, timeExit=20~30
데이(균형, 5~15m)
초기 기본값 세트 그대로
손절 좁히려면 slATR=0.8~1.0, 리스크 허용 크면 tp2ATR=2.2~2.5
스윙(정확도 우선, 1H~4H/Day)
entryMode=Flip only
preset=보수적, scoreExtra=+0.5~+1.0
adxMin=22~25, cooldownBars=3~5, minDistATR=0.3~0.5
confTF="D"(혹은 W), confirmBars=1~2
청산: tp1ATR=1.5, tp2ATR=3.0, timeExit=0~20(장세 따라)
돌파 전문(Flip만, 저항 상단 체결 줄임)
entryMode=Flip only
minDistATR=0.4~0.6, cooldownBars=2~3, chopMax=48~52
눌림 전문(Pullback만, VWAP/지지부근)
entryMode=Pullback only
kelMult=1.6~1.8, rsiBand=6~8(더 확실한 재진입만)
tp1ATR 살짝 낮춤(0.8~1.2) → 빈도 대비 체결·수익 확보
2) 차트 읽는 법(초간단)
색: 초록=롱 바이어스, 빨강=숏 바이어스
화살표: “권재용 B/S” 뜨면 후보. 상위TF도 같은 방향이어야 유효
존: 청록=S(지지), 적갈=R(저항). 존 위는 저항라인, 아래는 지지라인
주황선: 앵커 VWAP(마지막 Flip 기준 평균가).
3) 진입법(딱 두 개만 기억)
Flip 진입: 색이 바뀌는 순간 화살표 → 바로 위/아래 R/S 겹침 있나 보고 들어감
Pullback 진입: 추세 진행 중, 켈트너 밴드 꼬리 터치 + 중선 재관통 + RSI 재진입 → 들어감
4) 청산/손절(기본값 그대로)
TP1/TP2: 회색 라인 목표. 반절/전량 취향대로
SL: 검정 라인(가이드). ST 라인과 ATR 기준 중 더 보수적으로 잡힘
시간청산: 오래 끌리면 자동 신호(TIME_EXIT). 트렌딩장엔 꺼도 됨
5) 목적별 빠른 프리셋
스캘핑(신호 많이)
entryMode = Flip+Pullback
preset = 공격적 또는 중립 + scoreExtra = -0.5
cooldownBars = 0~1, minDistATR = 0~0.2, adxMin = 18~20
필요하면 useCHOP = OFF, atrZmin=0.0/atrZmax=1.0
데이(균형형)
위 “3분 설정” 그대로 쓰면 됨
스윙(정확도 우선)
entryMode = Flip only
preset = 보수적, scoreExtra = +0.5~+1.0
cooldownBars ≥ 3, minDistATR = 0.3~0.5, adxMin = 22~25
필터 전부 ON 유지
6) 자리 고르는 요령
롱이면 VWAP 위, 아래서 위로 재관통 시 더 좋음
바로 위 R1/R2/R3 겹치면 대기 or 사이즈 축소
Pullback은 S1~S3 근처 눌림 + 재관통 조합이 질 높음
7) 신호 안 뜰 때 체크리스트
OBV/MFI 끄고 preset=중립/보수적 → 점수 모자람
상위TF 불일치 or confirmBars 너무 큼
cooldownBars 때문에 막힘
minDistATR 너무 큼(가격이 ST와 너무 가까워야 함)
atrZ 범위 과도(레짐 필터 너무 빡셈)
EMA 정렬(20/50) 안 맞음
res로 다른 TF 계산 중인데 까먹음
8) 초간단 용어
ST(슈퍼트렌드): 추세선. 색이 바이어스
Flip: ST 색 전환
Pullback: 추세 중 되돌림 진입(켈트너+RSI 재진입)
S/R 존: 지지/저항 영역(청록/적갈 채움)
앵커 VWAP: 마지막 Flip부터 계산한 평균가
9) 안전수칙
알림은 봉 마감만 신뢰
지표는 허락장치, 자리는 S/R·VWAP로 판단
레버리지/사이즈는 따로 규칙 만들고 지킬 것
What it is (in plain English)
This is a non-repainting Supertrend system. It gives you two kinds of entries (trend flip and pullback), checks a bunch of sanity filters so you don’t click junk, confirms with a higher timeframe, draws nearby support/resistance zones, anchors a VWAP at the last regime change, and shows simple TP/SL guides. It also pushes JSON alerts you can feed to a bot.
How I’d read it on a chart
Trend first
The thick Supertrend line is the boss: green = long bias, red = short bias.
Signals only count when the higher TF agrees for a few confirmed candles.
Entries
Flip: the Supertrend flips color. That’s your fresh trend start.
Pullback: in an existing trend, price wicks to the Keltner band, then closes back through the midline, and RSI snaps back through its mid level. That’s your “buy the dip / sell the pop”.
Where you are
Teal filled zones = supports (S1–S3). Maroon filled zones = resistances (R1–R3).
Blue/purple lines are yesterday/last week high/low.
Orange line is the anchored VWAP from the last flip (with a soft band). If price hugs it, you’re near “fair”.
Getting out
After a signal, it paints TP1/TP2 by ATR and a guide SL (it respects Supertrend so it doesn’t sit unrealistically tight). There’s also an optional “time exit” if a trade drags on.
What keeps signals honest (filters)
EMA alignment: longs want EMA20 > EMA50 and price above the fast EMA (mirror for shorts).
ADX: wants trend strength above a floor and rising.
Choppiness: avoids heavy range conditions.
Distance to Supertrend: blocks entries that fire right on top of the line.
ATR regime: ignores dead volatility and panic volatility.
OBV/MFI: quick check that flow isn’t fighting you.
Cooldown: don’t fire twice in a row.
There’s also a tiny score: EMA(1pt) + OBV(1) + MFI(1). Your preset sets how many points you demand (Aggressive=2, Neutral=3, Conservative=4). If you turn OBV/MFI off but keep a high demand, you’ll get no signals—easy to forget.
Two ways I’d run it
More trades (scalpy):
Mode: Flip+Pullback
Preset: Aggressive (or Neutral with scoreExtra = -0.5)
Cooldown: 0–1 bars
Min distance to ST: 0–0.2 ATR
ADX min: ~18–20
ATR regime: loosen it if you feel filtered out
Optional: turn off Choppiness if you’re okay with rangy action
Pickier (day/swing):
Mode: Flip only (or Pullback only if you like mean-revert entries)
Preset: Conservative (+ scoreExtra +0.5 to +1.0 if needed)
Cooldown: ≥3 bars
Min distance to ST: 0.3–0.5 ATR
Keep CHOP/ADX/RSI/Keltner/OBV/MFI on
ADX min: ~22–25
Small habits that help
Set alerts on bar close to match the non-repainting logic.
Treat S/R zones and anchored VWAP as context, not hard rules. If a Flip long triggers into stacked resistances and above VWAP, size lighter or wait for a pullback signal.
Don’t forget the score vs. enabled filters. If OBV/MFI are off, max score is 1.
Quick checklist before you click
Higher TF lined up and confirmed?
Entry is Flip or valid Pullback (wick → midline re-cross + RSI re-entry)?
EMA/ADX/CHOP pass? Not sitting on the ST line?
Score meets the preset? ATR regime okay?
Any nasty R1/R2/R3 right in front of you? Where’s anchored VWAP?
TP/SL sensible for the timeframe you’re trading?
Trading HUB V001Entry Logic:
Trades are triggered when the strategy conditions (like breakouts or retests) occur.
Random Trade Filter:
To simulate randomness, the robot only allows a limited number of trades per day. Each trade has a chance to be taken or skipped, ensuring not every signal becomes a trade. This creates a probabilistic, randomized execution style.
Max Trades per Day:
You can define a daily cap (e.g., 30 trades per day). Once this number is reached, no further trades are opened until the next day.
Wrong Direction Exit:
If the price moves too far against the trade (measured by stop-loss distance or deviation threshold), the robot can close the position early instead of holding through large drawdowns.
Backtesting-Friendly:
The random logic is deterministic, meaning that backtests remain consistent and repeatable instead of changing each run.
All Time High & All Time Low + 52-Week (ATH & ATL) | by Octopu$🚀 All Time High & All Time Low (ATH & ATL) + 52-Week with % and $ Info| by Octopu$
What is a 52-week, ATH or ATL?
52-Week High
The highest price a stock has traded at in the past 52 weeks (Approx. 1 year).
Acts like a “short-term ATH.” Many traders and investors use it as a momentum signal — breaking above it shows strength. Often used by screeners (“Stocks near 52-week high”).
IF a Ticker highest price in the last year is $500, and it’s currently trading at $555, it just made a new 52-week high (but not necessarily an all-time high).
52-Week Low
The lowest price a stock has traded at in the past 52 weeks (Approx. 1 year).
Acts like a “short-term ATL.” Traders watch it for breakdowns, and long-term investors watch it for potential bargains/buy the dip. Also important for risk management and Stop Losses.
IF a Ticker lowest price in the last year was $100, and it falls to $88, it just made a new 52-week low (but not necessarily an all-time low).
ATH (All-Time High)
The highest price a stock (or index, crypto, etc...) has EVER reached in its entire trading history.
Shows maximum bullish strength. When price breaks to a new ATH, there is no overhead resistance → often leads to strong momentum rallies. Also used as a psychological level in case of resistance/breakout.
ATL (All-Time Low)
The lowest price a stock (or asset) has EVER traded at since it began trading.
Reflects maximum bearish weakness. Breaking below the ATL is dangerous (no historical support below). Often associated with companies in crisis or risk of delisting. Or simply crashers or faders, whatever slang you may call it. Generally heavily shorted.
EXAMPLE:
AMEX:SPY
www.tradingview.com
This indicator however should not be used as a standalone tool.
(The combination of factors relies on your own knowledge about Confluence Factors along with your Due Diligence)
This indicator is not an advice to buy or sell securities in any form.
ANY Ticker. ANY Timeframe.
Features:
• 52-Week High
• 52-Week Low
• ALL Time High
• ALL Time Low
• $ Value Difference (of Current Price)
• % Percentage Difference (of Current Price)
Options:
• Customization
• Toggles
Notes:
v1.0
Indicator release.
Changes and updates can come in the future for additional functionalities or per requests. Follow and Stay Tuned!
Did you like it? Please Support and Shoot me a message! I'd appreciate if you dropped by to say thanks! Thank you.
- Octopu$
🐙
Candlestick Patterns Dashboard Pro+ [ULTIMATE]Unleash the power of automated candlestick analysis with the most comprehensive and customizable pattern detection tool on TradingView. This is not just another pattern scanner; it's a complete trading dashboard designed to identify, score, and confirm high-probability setups, saving you hours of manual chart analysis.
Built with performance and reliability in mind, this script goes beyond simple detection by introducing a unique reliability score for every pattern, advanced confirmation filters, and a powerful on-screen dashboard to keep you informed.
Key Features
📈 Comprehensive Pattern Detection: Automatically identifies 13 of the most effective candlestick patterns, including Bullish/Bearish Engulfing, Hammer, Shooting Star, Doji, Morning/Evening Star, and more.
🔟 Dynamic Reliability Scoring: Every pattern is assigned a score from 1-10 based on its confirmation strength. Factors include candle body size, volume confirmation, trend alignment, and higher-timeframe confluence, giving you a quantifiable measure of a pattern's potential.
📊 The Ultimate Dashboard: Your at-a-glance command center. The on-screen dashboard provides a complete summary of all active patterns, showing you exactly when they last occurred and highlighting the most recent signals. It also includes an "Overall Bias" meter for a quick sentiment check.
🛡️ Trade Smarter with Advanced Confirmation Filters: Eliminate low-quality signals and focus on what matters.
Trend Alignment: Use SMA(50) and SMA(200) to only show patterns that agree with the dominant market trend.
Volume Confirmation: Validate patterns by requiring a surge in volume.
Non-Repainting HTF Confirmation: Ensure your patterns align with the trend on a higher timeframe (e.g., Daily trend for a 4H signal) using a reliable, non-repainting method.
Market Condition Filter: Isolate patterns that occur only in "Trending" or "Ranging" markets.
Time Filter: Restrict pattern detection to specific trading sessions.
🔧 ‘Fuzzy Logic’ for Real-World Trading: Textbook patterns are rare. Use the "Fuzzy Logic" settings to adjust the criteria for patterns like the Hammer, Piercing Line, and Doji, allowing you to catch imperfect but still valid real-world formations.
⚙️ Fully Customizable Scoring: You decide what's important! Adjust the bonus scores for volume, trend, and other factors to create a scoring system that perfectly aligns with your trading strategy.
🚨 Powerful & Customizable Alerts: Never miss an opportunity.
Create alerts for any individual pattern.
Get notified of "Pattern Clusters" when multiple bullish or bearish signals appear in close succession.
Customize the alert messages to be compatible with your favorite trading automation services.
🚀 Performance Optimized: A "Max Bars Back" setting ensures the script runs smoothly and efficiently, even on lower-end devices or extensive historical data.
How To Use This Indicator
For Confirmation: The primary strength of this tool is for confirmation. Do not trade based on patterns alone. Use the detected signals to confirm your own analysis, such as a pattern appearing at a key support/resistance level, a trendline, or a Fibonacci retracement. A Bullish Engulfing pattern at a major support level is a much stronger signal than one appearing in the middle of a range.
For Discovery: Use the Dashboard to quickly scan through your favorite assets. A dashboard full of recent bullish signals on one asset, and bearish on another, can instantly help you focus your attention for the day.
Customizing for Your Style:
Start with the Market Presets ("Forex," "Stocks," "Crypto") for a solid baseline.
Dive into the Scoring Weights to tell the indicator what you value most. A pure volume trader might increase the Volume Bonus score.
Adjust the Fuzzy Logic settings based on your market's volatility. A volatile crypto market might require a more lenient Doji definition than a stable blue-chip stock.
Setting Up Alerts:
Add the indicator to your chart.
Click the "Alert" button in the TradingView toolbar.
Set the "Condition" to "Candlestick Patterns Dashboard Pro+ ".
Choose the specific alert you want from the dropdown (e.g., "Bullish Pattern Detected," "Bearish Pattern Cluster").
Customize the message if needed and click "Create."
A Note of Thanks
This script began as a personal project and has evolved into this ultimate version thanks to invaluable community feedback, bug reports, and suggestions. A special thank you to the users who helped identify and fix critical bugs related to syntax and variable scope. This collaborative effort has made the indicator more robust and reliable for everyone.
Disclaimer: This tool is for educational and analytical purposes only. All trading involves substantial risk. Past performance is not indicative of future results. Please trade responsibly.
CHart_This FVGThis script will work on any time frame, and auto plots the classic ICT "fair value gaps", or imbalances, that result from a three candle formation wherein the middle candle body extends beyond the highs and lows of the end candles, leaving no overlap of the first and last candle wicks. Bullish imbalances are green, and bearish are red. Plotted zones will automatically close once a candle closure fully violates the imbalance zone with a close beyond its borders.
BBHAFIZ Signal + TP/SL Levels + Alerts🚀 No more waiting—signals ready instantly!
This indicator shows BUY/SELL with TP & SL directly on the chart.
Labels are neatly lined on the side, clear and easy to read.
Alerts are included, so no need to watch the chart 24/7.
Fast, simple, and time-saving for every trader!
FVG Zones – shrink on fill (bull/bear)Detects classic 3-candle FVGs (ICT definition).
Draws zones as boxes that extend to the right.
On each bar close:
Checks overlap with the current candle.
Shrinks the zone when price wicks into it (bullish: top moves down; bearish: bottom moves up).
Deletes the zone once it’s completely filled/closed.
Inputs: bullish/bearish zone color, border color, and max number of visible FVGs.
Possible extensions:
Multi-timeframe FVGs (e.g. H1 FVGs shown on M5).
Separate limits for bullish and bearish zones.
Alerts for new FVG, partial fill, or closed FVG.
Option “Body only” (ignore wicks when detecting overlap).
Minimum FVG size filter (ticks/ATR).
Abu Muhammad 112 for the directionA small and simple indicator that provides you with a forecast of the market direction for the current and upcoming periods based on the timeframe you choose. It displays buying in green and selling in red. It is not a recommendation to buy or sell.
Varma Fractal TEMA IndicatorThe Indicator uses Fractals and Three EMAs. A fractal is a repeating price pattern, typically consisting of five candlesticks, used to identify potential trend reversals or continuations. A bullish fractal suggests a possible upward price movement, while a bearish fractal indicates a potential downward trend. These patterns, popularized by Bill Williams, can be found across different timeframes and are considered a key part of his technical analysis system. Every Fractal line acts as an immediate support or resistance. The use of three EMAs in trading is well known. One can make own strategies with them.
Trapped Traders [ScorsoneEnterprises]This indicator identifies and visualizes trapped traders - market participants caught on the wrong side of price movements with significant volume imbalances. By analyzing volume delta at specific price levels, it reveals where traders are likely experiencing unrealized losses and may be forced to exit their positions.
The point of this tool is to identify where the liquidity in a trend may be.
var lowerTimeframe = switch
useCustomTimeframeInput => lowerTimeframeInput
timeframe.isseconds => "1S"
timeframe.isintraday => "1"
timeframe.isdaily => "5"
=> "60"
= ta.requestVolumeDelta(lowerTimeframe)
price_quantity = map.new()
is_red_candle = close < open
is_green_candle = close > open
for i=0 to lkb-1 by 1
current_vol = price_quantity.get(close)
new_vol = na(current_vol) ? lastVolume : current_vol + lastVolume
price_quantity.put(close, new_vol)
if is_green_candle and new_vol < 0
price_quantity.put(close, new_vol)
else if is_red_candle and new_vol > 0
price_quantity.put(close, new_vol)
We see in this snippet, the lastVolume variable is the most recent volume delta we can receive from the lower timeframe, we keep updating the price level we're keeping track of with that lastVolume from the lower timeframe.
This is the bulk of the concept as this level and size gives us the idea of how many traders were on the wrong side of the trend, and acting as liquidity for the profitable entries. The more, the stronger.
There are 3 ways to visualize this. A basic label, that will display the size and if positive or negative next to the bar, a gradient line that goes 10 bars to the future to be used as a support or resistance line that includes the quantity, and a bubble chart with the quantity. The larger the quantity, the bigger the bubble.
We see in this example on NYMEX:CL1! that there are lines plotted throughout this price action that price interacts with in meaningful way. There are consistently many levels for us.
Here on CME_MINI:ES1! we see the labels on the chart, and the size set to large. It is the same concept just another way to view it.
This chart of CME_MINI:RTY1! shows the bubble chart visualization. It is a way to view it that is pretty non invasive on the chart.
Every timeframe is supported including daily, weekly, and monthly.
The included settings are the display style, like mentioned above. If the user would like to see the volume numbers on the chart. The text size along with the transparency percentage. Following that is the settings for which lower timeframe to calculate the volume delta on. Finally, if you would like to see your inputs in the status line.
No indicator is 100% accurate, use "Trapped Traders" along with your own discretion.
Liquidity-Weighted Business Cycle (Satoshi Global Base)🌍 BTC-Affinity Global Liquidity Business Cycle (MACD Model)
This indicator models Bitcoin’s macroeconomic business cycle using a BTC-weighted global liquidity index as its foundation. It adapts a MACD-based framework to visualize expansions and contractions in fiat liquidity across major economies with high Bitcoin affinity.
🔍 What It Does:
🧠 Constructs a Global M2 Liquidity Index from the top 10 most BTC-relevant fiat currencies
(USD, EUR, JPY, GBP, INR, CNY, KRW, BRL, CAD, AUD)
— each weighted by its Bitcoin adoption score and FX-converted into USD.
📊 Applies a MACD (Moving Average Convergence Divergence) signal to the index to detect macro liquidity trends.
🟢 Plots a histogram of business cycle momentum (red = expansion, green = contraction).
🔴 Marks potential cycle peaks, useful for macro trading alignment.
⚖️ BTC Affinity-Weighted Countries:
🇺🇸 United States
🇪🇺 Eurozone
🇯🇵 Japan
🇬🇧 United Kingdom
🇮🇳 India
🇨🇳 China
🇰🇷 South Korea
🇧🇷 Brazil
🇨🇦 Canada
🇦🇺 Australia
Weights are user-adjustable to reflect evolving capital controls, regulation, and real-world BTC adoption trends.
✅ Use Cases:
Confirm macro risk-on vs risk-off regimes for BTC and crypto.
Identify ideal entry and exit zones in macro pair trades (e.g., MSTR vs MSTY).
Monitor how global monetary expansion feeds into BTC valuations.
US Liquidity-Weighted Business Cycle📈 BTC Liquidity-Weighted Business Cycle
This indicator models the Bitcoin macro cycle by comparing its logarithmic price against a log-transformed liquidity proxy (e.g., US M2 Money Supply). It helps visualize cyclical tops and bottoms by measuring the relative expansion of Bitcoin price versus fiat liquidity.
🧠 How It Works:
Transforms both BTC and M2 using natural logarithms.
Computes a liquidity ratio: log(BTC) – log(M2) (i.e., log(BTC/M2)).
Runs MACD on this ratio to extract business cycle momentum.
Plots:
🔴 Histogram bars showing cyclical growth or contraction.
🟢 Top line to track the relative price-to-liquidity trend.
🔴 Cycle peak markers to flag historical market tops.
⚙️ Inputs:
Adjustable MACD lengths
Toggle for liquidity trend line overlay
🔍 Use Cases:
Identifying macro cycle tops and bottoms
Timing long-term Bitcoin accumulation or de-risking
Confirming global liquidity's influence on BTC price movement
Note: This version currently uses US M2 (FRED:M2SL) as the liquidity base. You can easily expand it with other global M2 sources or adjust the weights.
VWAP Suite v1.0.5This is the latest script by Kenny at The Nexus Discord. ONLY available to members in The Nexus, please DM Kenny to be approved for the script.
VWAP Suite gives you many different vwaps and Anchored Vwaps to choose from also being able to set your own custom ones from important timeframes. Trump pump? Yep. Major lows, Yup.
Also can email kenny@aceindicators.com for questions.
