ابدأ الآن

متذبذبات

MTF Trend DashboardThe Multi-Timeframe Trend Dashboard PRO is an advanced technical analysis tool that consolidates trend signals across six configurable timeframes into a single, intuitive heat-map dashboard. Designed for traders who need instant market clarity without switching between charts. Core Features 🌊 Multi-Timeframe Analysis Analyzes up to 6 customizable timeframes simultaneously (5m, 15m, 1H, 4H, Daily, Weekly) Each timeframe independently evaluated for trend direction and strength Weighted scoring system prioritizes higher timeframe signals 📈 Four-Pillar Technical Confluence EMA Crossover (20/50) - Trend direction indicator (🟢 Bullish / 🔴 Bearish) RSI (14) - Momentum analysis with exact values and overbought/oversold zones MACD (12,26,9) - Momentum confirmation (🟢 Positive / 🔴 Negative) Volume Analysis - Confirms move validity (🔥 High / ❄️ Low / ⚪ Normal) 🎯 Smart Signal System 🚀 STRONG BUY - All indicators strongly bullish (Score ≥2.5) 📈 BUY - Multiple bullish confirmations (Score 1.5-2.5) 🟢 Bullish - Mild uptrend (Score 0-1.5) ⚪ NEUTRAL - Sideways market (Score = 0) 🔴 Bearish - Mild downtrend (Score -1.5 to 0) 📉 SELL - Multiple bearish confirmations (Score -2.5 to -1.5) 💥 STRONG SELL - All indicators strongly bearish (Score ≤-2.5) 🎨 Heat-Map Color Coding Bright Green = Strong uptrend with high conviction Yellow = Neutral/Choppy conditions Bright Red = Strong downtrend with high conviction Color intensity reflects signal strength 💪 Strength Meter Visual bar showing average trend strength across all timeframes (0-100%) Helps identify powerful moves vs weak consolidations 🎯 Overall Bias Weighted composite score emphasizing higher timeframes Daily/Weekly signals carry 4-5x more weight than intraday Provides "big picture" directional bias 🚨 Built-in Alert System Strong Bullish/Bearish Confluence detected Major trend changes across multiple timeframes Customizable alert messages How to Use Trend Confirmation - Look for alignment (all rows showing same color = strong trend) Divergence Detection - Lower timeframes differ from higher = potential reversal Entry Timing - Wait for Overall Bias + multiple green signals with 🔥 volume Risk Management - Avoid trades when Overall Bias shows ⚪ NEUTRAL Customization Adjustable EMA, RSI, MACD, Volume parameters Flexible timeframe selection (enable/disable any TF) Dark/Light theme support Position and size controls © | Built on TradingView Precision tools for precision traders.
مؤشر Pine Script®
من ‎abo0o‎
VEGA (Velocity of Efficient Gain Adaptation)VEGA (Velocity of Efficient Gain Adaptation) VEGA is a momentum oscillator that measures the velocity of an efficiency-weighted adaptive moving average. Unlike traditional momentum indicators that react uniformly to all price movements, VEGA intelligently adapts its sensitivity based on market conditions—responding quickly during trending periods and filtering noise during consolidation. -------------------------------- What Makes VEGA Different Efficiency-Driven Adaptation At its core, VEGA uses the Efficiency Ratio (ER) to distinguish between trending and choppy markets. When price moves efficiently in one direction, VEGA's underlying adaptive MA speeds up to capture the move. When price chops sideways, it slows down to avoid whipsaws. This creates a momentum reading that's inherently cleaner than fixed-period alternatives. Linear Regression Smoothed Source VEGA offers an optional LinReg-smoothed price source that blends regular candles with linear regression values. This pre-smoothing reduces noise before it ever enters the calculation, resulting in a histogram that's easier to read without sacrificing responsiveness. The mix ratio lets you dial in exactly how much smoothing you want. Z-Score Normalization with Dead Zone Rather than arbitrary oscillator bounds, VEGA normalizes output as standard deviations from the mean. This gives statistically meaningful levels: readings above +2σ or below -2σ represent genuinely extreme momentum. The configurable dead zone (with Snap, Soft Fade, or None modes) filters out insignificant movements near zero, keeping you focused on signals that matter. -------------------------------- How It Works 1. Source Preparation — Price is smoothed via a LinReg/regular candle blend 2. Efficiency Ratio — Measures directional movement vs total movement over the lookback period 3. Adaptive MA — Applies variable smoothing based on efficiency (fast during trends, slow during chop) 4. Velocity — Calculates the rate of change of the adaptive MA 5. Normalization — Converts to Z-Score (standard deviations) or ATR-normalized percentage 6. Dead Zone — Optionally filters near-zero values to reduce noise -------------------------------- How To Read VEGA Signal and Interpretation Histogram above zero | Bullish momentum Histogram below zero | Bearish momentum Bright color | Momentum accelerating Faded color | Momentum decelerating Beyond ±1σ bands | Above-average momentum Beyond ±2σ bands | Extreme momentum (potential reversal zone) Zero line cross*| Momentum shift -------------------------------- Key Settings ER Length — Lookback for efficiency ratio calculation. Higher = smoother, slower adaptation. Fast/Slow Smoothing — Controls the adaptive MA's responsiveness range. The MA blends between these based on efficiency. LinReg Settings — Enable smoothed candles and adjust the blend ratio (0 = regular candles, 1 = full LinReg, 0.5 = 50/50 mix). Z-Score Lookback — Period for calculating mean and standard deviation. Shorter = more reactive normalization. Dead Zone Type — How to handle near-zero values: Snap — Hard cutoff to zero Soft Fade — Gradual reduction toward zero None — No filtering Dead Zone Threshold — Values within this Z-Score range are affected by the dead zone setting. VEGA works on any timeframe and any market. For best results, adjust the ER Length and LinReg settings to match your trading style and the volatility characteristics of your instrument.
مؤشر Pine Script®
من ‎B3AR_Trades‎
RSI Info WindowRSI Info Window is a minimalist overlay utility that displays the current RSI value and a simple market state label (Overbought, Oversold, or Neutral) directly on the chart. The goal is to provide quick RSI context without using a separate oscillator pane, helping keep the chart clean for price-action, SMC, and structure-based trading. How it works Calculates RSI using the selected RSI Length (default 14). Compares RSI to the Overbought and Oversold thresholds (default 70/30). Displays a small label on the most recent candle showing: RSI value Current state: Overbought / Oversold / Neutral The label updates in real time as the latest candle forms. Inputs RSI Length – Controls RSI sensitivity (default 14) Overbought Level – RSI threshold for overbought (default 70) Oversold Level – RSI threshold for oversold (default 30) How to use Overbought: RSI above the overbought level — may indicate momentum is extended; watch for continuation vs exhaustion based on your system. Oversold: RSI below the oversold level — may indicate downside extension; watch for reversal conditions and structure confirmation. Neutral: RSI between thresholds — often indicates balanced conditions or consolidation. This indicator is designed as a compact reference tool, not a complete trading system. Notes The overlay label is anchored to the most recent candle and refreshes on the last bar. Intended to save screen space vs. a full RSI subpanel. Disclaimer This script is for educational and informational purposes only and does not constitute financial advice. Always use risk management and confirm signals with your broader trading plan.
مؤشر Pine Script®
من ‎keith_williams49‎
RSI Info WindowRSI Info Window is a minimalist overlay utility that displays the current RSI value and a simple market state label (Overbought, Oversold, or Neutral) directly on the chart. The goal is to provide quick RSI context without using a separate oscillator pane, helping keep the chart clean for price-action, SMC, and structure-based trading. How it works Calculates RSI using the selected RSI Length (default 14). Compares RSI to the Overbought and Oversold thresholds (default 70/30). Displays a small label on the most recent candle showing: RSI value Current state: Overbought / Oversold / Neutral The label updates in real time as the latest candle forms. Inputs RSI Length – Controls RSI sensitivity (default 14) Overbought Level – RSI threshold for overbought (default 70) Oversold Level – RSI threshold for oversold (default 30) How to use Overbought: RSI above the overbought level — may indicate momentum is extended; watch for continuation vs exhaustion based on your system. Oversold: RSI below the oversold level — may indicate downside extension; watch for reversal conditions and structure confirmation. Neutral: RSI between thresholds — often indicates balanced conditions or consolidation. This indicator is designed as a compact reference tool, not a complete trading system. Notes The overlay label is anchored to the most recent candle and refreshes on the last bar. Intended to save screen space vs. a full RSI subpanel. Disclaimer This script is for educational and informational purposes only and does not constitute financial advice. Always use risk management and confirm signals with your broader trading plan.
مؤشر Pine Script®
من ‎keith_williams49‎
Beast Mode PRO v4.0# Beast Mode PRO v4.0 - Advanced Multi-Regime Trading System ## Overview Beast Mode PRO v4.0 is a sophisticated technical analysis indicator designed for active traders seeking high-probability setups across multiple timeframes. This system combines machine learning-inspired clustering algorithms with traditional technical analysis to identify market regimes and generate precision entry signals. The indicator adapts to different trading styles through intelligent preset configurations and multiple trading modes. --- ## Core Methodology ### Signal Generation Framework The indicator employs a **multi-component voting system** that analyzes market conditions through several independent technical perspectives: **Technical Components:** - **RSI (Relative Strength Index)**: Momentum oscillator measuring overbought/oversold conditions - **Fisher Transform**: Price transformation technique that normalizes price distributions for clearer turning points - **DMI (Directional Movement Index)**: Trend strength indicator measuring directional pressure - **Z-Score Analysis**: Statistical measure identifying price deviations from historical norms - **Moving Average Ratio**: Price relationship to its moving average baseline - **MFI (Money Flow Index)**: Volume-weighted momentum indicator - **Stochastic Oscillator**: Momentum indicator comparing closing price to price range - **CCI (Commodity Channel Index)**: Measures current price level relative to average price level ### Clustering Engine The system utilizes a **k-means inspired clustering algorithm** that categorizes each technical indicator's normalized values into distinct market regimes (bullish, bearish, neutral). This approach: 1. **Normalizes** all indicators using z-score transformation over a historical lookback window 2. **Clusters** normalized values using percentile-based thresholds 3. **Aggregates** individual votes into a composite score ranging from -100 to +100 4. **Smooths** the composite score using selectable methods (SMA, EMA, WMA, HMA, TEMA, DEMA) The clustering percentiles adapt dynamically based on current market volatility (ATR-normalized), ensuring the system remains responsive across different market conditions. --- ## Trading Modes ### 1. Normal Mode Standard crossover-based signals using fixed thresholds (+10/-10). Suitable for balanced trading with moderate signal frequency. ### 2. Scalper Mode Dynamic threshold adjustment based on recent score volatility. Generates more frequent signals by adapting to short-term price movements. ### 3. Aggressive Mode Reversal-focused approach that triggers signals when the composite score crosses extreme levels (+80/-80), targeting major trend reversals. ### 4. Hybrid Mode Combines Normal and Aggressive signals, capturing both standard crossovers and extreme reversals for comprehensive market coverage. ### 5. Super Scalper Mode Ultra-responsive mode using signal line crossovers (14-period HMA of composite score) for maximum trade frequency. ### 6. Sniper Mode (Premium Feature) Multi-confirmation system requiring alignment of: - Composite score threshold breach - Positive fast momentum (10-period SMI) - Positive trend momentum (200-period SMI) - Price above/below smart trend filter MA This mode prioritizes precision over frequency, filtering out low-probability setups. --- ## Timeframe Presets Pre-optimized configurations for common trading timeframes: ### 1 Minute Preset - Fast smoothing (10-period WMA) - Tight chop filter (61.8 threshold) - Optimized for rapid scalping with minimal lag ### 2 Minute Preset - Balanced smoothing (12-period EMA) - Enhanced volume filtering - Moderate cooling period (5 bars) ### 3 Minute Preset - HMA smoothing for reduced lag - Stochastic and CCI enabled - Balanced approach for intraday trading ### 5 Minute Preset - TEMA smoothing for trend following - Stronger filters to reduce noise - Extended lookback (1000 bars) ### 15 Minute Preset - DEMA smoothing for swing positions - Maximum filtering configuration - All technical indicators enabled - Suitable for swing trading and position building Users can also select "Custom" to manually configure all parameters. --- ## Advanced Filtering System ### 1. Choppy Market Filter Uses Choppiness Index calculation to identify consolidating markets. When CI exceeds the threshold, signals are suppressed to avoid whipsaw trades. ### 2. Smart Trend Filter Configurable moving average (SMA/EMA/WMA/HMA/TEMA/DEMA/VWMA/RMA) that prevents counter-trend signals. Long signals require price above the MA, shorts require price below. ### 3. Volume Filter Compares current volume to its moving average. Signals are suppressed when volume falls below the specified multiplier of average volume. ### 4. ATR Volatility Filter Prevents trading during low volatility periods when ATR falls below its moving average multiplied by the specified factor. ### 5. Session Filter Time-based filtering for Asia, London, New York, or combined sessions. Ensures trading only during preferred market hours. ### 6. Multi-Timeframe Confirmation Optionally requires higher timeframe alignment before generating signals, adding confluence for higher probability trades. ### 7. Cooling Off Period Prevents signal clustering by enforcing a minimum number of bars between consecutive signals. --- ## Smart Money Concepts Integration ### Order Block Detection Identifies institutional supply/demand zones using multi-timeframe analysis: - Detects strong directional candles followed by breakout moves - Volume confirmation ensures significance - Customizable timeframe selection (current TF or higher TF: 5m, 15m, 30m, 1H, Daily) - Visual boxes mark active order blocks with automatic expiration after lookback period - Price interaction alerts when touching active zones ### Liquidity Zones Marks equal highs (EQH) and equal lows (EQL) where stop losses typically cluster, indicating potential reversal or breakout points. --- ## Momentum Analysis ### Fast Momentum (Default: 10-period) Short-term momentum oscillator using Stochastic Momentum Index (SMI) calculation. Provides early warning of momentum shifts. ### Trend Momentum (Default: 200-period) Long-term momentum gauge confirming overall trend direction. Used in Sniper Mode for multi-confirmation. ### Momentum Divergence Detection Automatically identifies: - **Regular Divergence**: Price makes new high/low but momentum doesn't (reversal signal) - **Hidden Divergence**: Price makes higher low/lower high but momentum doesn't (continuation signal) --- ## Visual Components ### Price Chart Overlay - **Smart Trend MA**: Dynamically colored moving average based on price position - **EMA Cloud**: 50/200 EMA cloud showing long-term trend (background shading) - **Trend Background**: Subtle background coloring based on composite score - **Order Block Boxes**: Institutional supply/demand zones - **Entry/Exit Markers**: Clear visual signals with emoji labels - **Liquidity Markers**: EQH/EQL identification ### Bar Coloring Bars change color based on active mode and market regime: - **Sniper Mode**: Purple (bull) / Pink (bear) - **Aggressive Mode**: Bright Green / Bright Red - **Super Scalper**: Neon Green / Neon Red - **Timeframe Presets**: Unique color schemes per preset - **Choppy/Neutral**: Always gray regardless of mode ### Oscillator Pane - **Composite Score Line**: Gradient-colored stepline showing current regime strength - **Fast/Trend Momentum**: Optional overlays (gold/cyan colors) - **Divergence Markers**: Visual alerts for regular, hidden, and momentum divergences - **Power Zones**: Overbought/oversold regions (80/-80 levels) - **Dynamic/Fixed Thresholds**: Visual reference lines based on active mode ### Interactive Dashboards **Main Dashboard** displays: - Active preset/mode configuration - Real-time indicator values and votes - Current market status (active/choppy/counter-trend/low volume/low ATR/MTF misalignment) - Regime classification (Strong Long/Long/Neutral/Short/Strong Short) - Smart Trend MA status **Performance Dashboard** shows: - Exit strategy (Fixed TP/SL, Trailing Stop, Opposite Signal) - Total trades and win rate - Total points and average per NY session - Profit factor and recovery factor - Best/worst trades and max drawdown - Maximum winning/losing streaks - Sharpe ratio and average risk:reward **TP Optimizer** (33 variations tested): - Tests take profit levels from 40 to 200 ticks (5-tick increments) - Sortable by: Profit Factor, Win Rate, Total Points, Sharpe Ratio - Displays top 5 configurations with full metrics - Real-time optimization during backtesting --- ## Backtest Engine ### Exit Strategies **1. Fixed TP/SL** - Configurable in Ticks, ATR multiples, or Percentage - Precise risk management with predefined targets **2. Exit on Opposite Signal** - Closes position when counter-signal appears - Adapts to changing market conditions - Useful for trend-following approaches **3. Trailing Stop** - Dynamic stop loss that follows profitable moves - Configurable trailing offset percentage - Locks in profits while allowing trends to develop ### Risk Management - Optional minimum risk:reward filter - Prevents trades below specified R:R threshold - Date range filtering for historical analysis - Session-based performance tracking ### Performance Metrics - Win rate, profit factor, Sharpe ratio - Maximum drawdown and recovery factor - Consecutive win/loss streaks - Average win/loss analysis - Gross profit vs gross loss breakdown --- ## Alert System Comprehensive alert conditions for: - Entry signals (Long/Short) - Exit events (TP/SL/Opposite/Trailing) - Trend signals (Strong bullish/bearish) - Divergences (Regular/Hidden/Momentum) - Order block detection and touches - Multi-condition strong signals (all confirmations aligned) --- ## How to Use ### Quick Start 1. Select your preferred timeframe preset (1m, 2m, 3m, 5m, 15m, or Custom) 2. Choose a trading mode (Normal, Scalper, Aggressive, Hybrid, Super Scalper, or Sniper) 3. Configure session filter to match your trading hours 4. Enable desired filters (choppy, trend, volume, ATR, MTF) 5. Set your exit strategy and TP/SL levels 6. Monitor signals on price chart and oscillator pane ### Optimization Workflow 1. Enable "Run TP Optimizer" in backtest settings 2. Run backtest on historical data 3. Review Optimizer Dashboard for best TP levels 4. Sort by preferred metric (Profit Factor, Win Rate, Total Points, Sharpe) 5. Apply winning configuration to live trading ### Advanced Configuration - Customize individual indicator lengths and enable/disable specific components - Adjust clustering parameters (lookback window, percentiles, cluster count) - Fine-tune smoothing methods and lengths - Configure order block detection timeframe and sensitivity - Set cooling off period to control signal frequency --- ## Unique Features 1. **Adaptive Clustering**: Volatility-adjusted percentiles ensure consistent performance across market conditions 2. **Multi-Mode Architecture**: Six distinct trading modes from conservative to ultra-aggressive 3. **Timeframe Intelligence**: Pre-optimized presets eliminate guesswork for common timeframes 4. **Smart Money Integration**: Order block detection and liquidity zone marking 5. **Comprehensive Backtesting**: Three exit strategies with 33-variation TP optimization 6. **Visual Clarity**: Mode-specific bar coloring and clean chart presentation 7. **Filter Stack**: Seven-layer filtering system prevents low-quality signals 8. **Real-Time Metrics**: Live performance tracking with advanced statistics --- ## Benefits - **Reduced False Signals**: Multi-confirmation clustering approach filters noise - **Adaptability**: Works across timeframes and market conditions through preset system - **Transparency**: Open visualization of all component votes and filtering status - **Risk Management**: Built-in TP/SL optimization and R:R filtering - **Time Efficiency**: Preset configurations save hours of manual optimization - **Educational Value**: Dashboard shows exactly why signals trigger or get filtered - **Professional Tools**: Institutional concepts (order blocks, liquidity zones) accessible to retail traders --- ## Best Practices - Use Sniper Mode for high-probability setups during volatile markets - Enable choppy filter during consolidation periods - Combine Smart Trend Filter with MTF confirmation for swing trades - Run TP Optimizer monthly to adapt to changing market dynamics - Monitor Sharpe Ratio in addition to win rate for risk-adjusted performance - Use session filters to avoid low-liquidity hours - Start with preset configurations before custom optimization --- ## Technical Requirements - TradingView Premium/Pro/Pro+ for full feature access - Minimum chart history: 500 bars (adjustable in clustering settings) - Works on all instruments (stocks, forex, crypto, futures) - Compatible with standard candles (Heikin Ashi optional but not recommended for backtesting) --- ## Disclaimer This indicator is a technical analysis tool designed to assist trading decisions. It does not guarantee profits and should be used in conjunction with proper risk management, fundamental analysis, and personal trading experience. Past performance does not indicate future results. Users should thoroughly test the indicator on demo accounts before live trading. --- **Version**: 4.0 **Language**: Pine Script v6 **Type**: Overlay Indicator with Oscillator Pane **Calculation**: On bar close (default) or real-time (configurable)
مؤشر Pine Script®
من ‎kdeezy‎
DR.SS.SMART BUY/SMARTSELL SCALPER1️⃣ BEST TIMEFRAME Use this as a scalper / intraday trend tool ✅ Best 5 min 15 min ⚠️ Avoid 1 min (too noisy) Daily (signals become late) 2️⃣ FIRST CHECK – MARKET CONDITION (Dashboard) Before taking any trade, look at the Smart Panel (Dashboard): ✔ Trade ONLY when: Market State = Trending Volatility = Active Trend Pressure = Bullish or Bearish At least 3–4 MTF boxes are same color ❌ Avoid trades when: Market State = No trend / Ranging Purple candles (ADX sideways) Remember: T-V-T rule → Trend + Volatility + Timeframe agree 3️⃣ BUY SETUP (LONG TRADE) ✅ Conditions in your code: Price crosses ABOVE Supertrend Close ≥ SMA 13 Bar color turns BLUE Price above EMA 200 → Smart Buy ADX not sideways (no purple bars) 📍 Chart shows label: “Buy” → normal buy “Smart Buy” → high-probability trade (BEST) 🔵 HOW TO ENTER BUY Enter at candle CLOSE where Buy / Smart Buy appears Do NOT enter mid-candle 🛑 STOP LOSS (Auto from code) SL = ATR-based stop Shown as red SL line 👉 Safe rule: Never widen SL 🎯 TARGETS (Auto plotted) TP1 = 1:1 TP2 = 2:1 TP3 = 3:1 📌 Recommended management: Book 50% at TP1 Move SL to Entry Hold rest till TP2 / Trail 4️⃣ SELL SETUP (SHORT TRADE) ✅ Conditions: Price crosses BELOW Supertrend Close ≤ SMA 13 Bar color turns RED Price below EMA 200 → Smart Sell No sideways (ADX > 15) 📍 Label shown: “Sell” “Smart Sell” (BEST) 🔴 HOW TO ENTER SELL Enter at close of signal candle Follow same SL & TP rules 5️⃣ SUPPLY & DEMAND CONFIRMATION (POWER FILTER) 🔹 Best Buy: Price near Demand Zone Then Smart Buy appears 🔹 Best Sell: Price near Supply Zone Then Smart Sell appears 👉 These are institutional entries 6️⃣ WHEN NOT TO TRADE ❌ Avoid trades when: Purple candles (Sideways) Supertrend flipping repeatedly MTF dashboard mixed colors During low-volume sessions 7️⃣ SESSION WISE BEST PERFORMANCE From your session logic: ✅ Best Scalping: London London + New York overlap ⚠️ Avoid: Mid-Tokyo (low volatility) 8️⃣ PERFECT TRADE CHECKLIST (SAVE THIS) Before clicking BUY/SELL, ask: ✔ Smart Buy / Smart Sell? ✔ Price above/below EMA 200? ✔ Dashboard trend agrees? ✔ No sideways candles? ✔ Volatility Active? 👉 If 4 out of 5 = YES → TAKE TRADE 9️⃣ SIMPLE ONE-LINE STRATEGY Trade only Smart Buy/Sell in trending market, book partial at 1:1, trail rest with Smart Trail ✅ BEST TRADING SESSIONS (Use ONLY these) 🥇 LONDON SESSION (BEST & SAFE) 🕒 12:30 PM – 4:30 PM IST Why best for your script Clean trends Good volatility Less fake signals Supertrend + EMA200 works perfectly 👉 This should be your PRIMARY session 🥈 LONDON → NEW YORK OVERLAP (MOST POWERFUL) 🕒 6:00 PM – 8:30 PM IST Why Institutional money enters Strong breakouts Smart Buy / Smart Sell accuracy highest 👉 Use only Smart signals in this session 🥉 NEW YORK SESSION (Early Part Only) 🕒 6:00 PM – 9:00 PM IST Use when Market State = Trending Volatility = Active MTF mostly same color ⚠️ Stop after 9:00 PM IST ❌ SESSIONS TO AVOID 🚫 TOKYO SESSION 🕒 5:30 AM – 10:30 AM IST Low volatility Sideways (purple candles) Many fake reversals 🚫 SYDNEY SESSION 🕒 2:30 AM – 5:30 AM IST Very low volume Not suitable for scalping 🚫 INDIAN MIDDAY 🕒 11:00 AM – 12:15 PM IST Choppy Stop-hunting candles 📌 BEST DAILY ROUTINE (Follow This) Time (IST) Action 9:15 – 10:30 ❌ Avoid (fake moves) 12:30 – 4:30 ✅ TRADE (Best zone) 6:00 – 8:30 ✅ TRADE (High accuracy) After 9:00 ❌ Avoid 🧠 EASY MEMORY RULE (Your Style) “LON → NY = MONEY” 💰 “ASIA = NO TRADE” ❌ 🎯 FINAL RECOMMENDATION If you want only ONE session: 👉 Trade ONLY: 12:30 PM – 4:30 PM IST This will give: Less stress Higher win-rate Cleaner Smart Buy/Sell signals 🇮🇳 BEST TRADING SESSIONS (INDIA – IST) 🥇 LONDON SESSION – BEST FOR INDIAN TRADERS 🕒 12:30 PM – 4:30 PM IST ✅ THIS IS THE BEST SESSION Strong trend moves High accuracy Smart Buy / Smart Sell Less sideways (purple candles reduce) Works perfectly with Supertrend + EMA 200 👉 Use this as your MAIN session 🥈 LONDON → NEW YORK OVERLAP (POWER SESSION) 🕒 6:00 PM – 8:30 PM IST ✅ Very strong moves Institutional activity Best breakouts High RR trades (2:1 / 3:1) ⚠️ Trade only Smart Buy / Smart Sell ⚠️ Avoid over-trading 🥉 INDIAN MARKET OPEN (LIMITED USE) 🕒 9:20 AM – 10:15 AM IST ✔ Use only if: Dashboard = Trending Volatility = Active Direction same as higher TF ❌ Avoid after 10:30 AM ❌ SESSIONS TO AVOID (INDIA) Session Time (IST) Reason Tokyo 5:30 – 10:30 AM Sideways / fake moves Mid-day Chop 11:00 – 12:15 PM Low volume Late NY After 9:00 PM Whipsaws 📌 BEST DAILY ROUTINE (INDIA) Time What to Do 9:15 – 9:20 ❌ No trade 9:20 – 10:15 ⚠️ Only clean Smart signals 12:30 – 4:30 ✅ MAIN TRADING WINDOW 6:00 – 8:30 ✅ HIGH PROBABILITY After 9:00 ❌ Stop trading 🧠 EASY MEMORY RULE “INDIA → LONDON → MONEY” 💰 “ASIA MIDDAY → NO TRADE” ❌ 🎯 FINAL ANSWER (ONE-LINE) 👉 For India (IST), trade ONLY between 12:30 PM – 4:30 PM and 6:00 PM – 8:30 PM
مؤشر Pine Script®
من ‎TRADEORBIT01‎
RSI+Breadth Multi-Factor# RSI+ Breadth Multi-Factor Indicator **Multi-factor scoring system for US market timing | 美股多因子择时评分系统** [! (img.shields.io)](www.tradingview.com) [! (img.shields.io)](www.tradingview.com) [! (img.shields.io)](LICENSE) --- ## Overview | 概述 A quantitative indicator that combines **RSI**, **market breadth** (% above 20/50-day MA), and **up/down volume ratio** to generate actionable buy/sell signals for SPY, QQQ, and IWM. 这是一个结合 **RSI**、**市场广度**（站上20/50日均线比例）和 **涨跌成交量比** 的量化指标，为 SPY、QQQ 和 IWM 生成可操作的买卖信号。 --- ## Features | 功能特点 | Feature | 功能 | |---------|------| | 🎯 Multi-factor scoring (-10 to +10) | 多因子评分系统 (-10 到 +10) | | 📊 RSI + Breadth + Volume integration | RSI + 广度 + 成交量三重验证 | | 🔀 Three markets: SPY, QQQ, IWM | 三大市场：SPY、QQQ、IWM | | 🔥 Cross-market resonance detection | 跨市场共振信号检测 | | 📈 Trend filter (MA-based) | 趋势过滤（均线判断） | | ⏰ Auto-adapts to intraday timeframes | 自动适配日内时间周期 | | 🎚️ Three modes: Aggressive/Standard/Conservative | 三种模式：激进/标准/保守 | --- ## Signal Reference | 信号说明 | Score | Emoji | Signal | 中文 | Action | |:-----:|:-----:|--------|:----:|--------| | ≥ 6 | 🚀 | **PANIC LOW** | 恐慌低点 | Strong buy 强烈买入 | | ≥ 4 | 📈 | **BUY ZONE** | 低吸区 | Accumulate 分批建仓 | | -3~3 | - | **HOLD** | 持有 | Hold position 持仓观望 | | ≤ -4↑ | ⭐ | **ELEVATED** | 高估 | Hold cautious 持有但谨慎 | | ≤ -4↓ | ⚡ | **CAUTION** | 观望 | Take profit 止盈 | | ≤ -6↓ | ⚠️ | **REDUCE** | 减仓 | Reduce position 减少仓位 | > **↑ = Uptrend** (price > MA) | **↓ = Downtrend** (price < MA) ### Resonance Signals | 共振信号 | Emoji | Signal | Description | |:-----:|--------|-------------| | 🔥 | Resonance Buy | Multiple markets in buy zone 多市场同时低吸 | | ❄️ | Resonance Risk | Multiple markets in risk zone 多市场同时高估 | --- ## Scoring Logic | 评分逻辑 ### Factors | 因子 | Factor | Weight | Buy Score | Sell Score | |--------|--------|-----------|------------| | **RSI** | 1x | RSI < 30 → +2, < 40 → +1 | RSI > 75 → -2, > 65 → -1 | | **FI (50D MA%)** | Bottom focus | < 25% → +3, < 35% → +2 | > 85% → -2, > 78% → -1 | | **TW (20D MA%)** | Top focus | < 30% → +1 | > 82% → -3, > 72% → -2 | | **Volume Ratio** | 1x | UVOL/DVOL < 0.5 → +2 | > 2.5 → -2 | ### Breadth Symbols | 广度数据 | Market | TW Symbol | FI Symbol | Volume | |--------|-----------|-----------|--------| | SPY (S&P 500) | INDEX:S5TW | INDEX:S5FI | USI:UVOL/DVOL | | QQQ (NASDAQ) | INDEX:NCTW | INDEX:NCFI | USI:UVOLQ/DVOLQ | | IWM (Russell 2000) | INDEX:R2TW | INDEX:R2FI | USI:UVOL/DVOL | --- ## Settings | 设置说明 ### Mode | 模式 - **Aggressive**: Lower thresholds, shorter cooldown (5 bars) - **Standard**: Balanced defaults (10 bar cooldown) - **Conservative**: Higher thresholds, longer cooldown (15 bars) ### Key Parameters | 关键参数 | Parameter | Default | Description | |-----------|---------|-------------| | RSI Length | 14 | RSI calculation period | | Trend MA Length | 10 | MA for trend filter | | Cooldown Bars | 10 | Min bars between same signals | | Resonance Window | 3 | Bars to check for multi-market agreement | | Min Markets | 2 | # of markets needed for resonance | --- ## Usage | 使用方法 ### Installation | 安装 1. Copy the indicator code 2. In TradingView: **Pine Editor** → **New** → Paste code → **Add to Chart** ### Recommended Setup | 推荐设置 - **Timeframe**: Daily (D) for best accuracy | 推荐日线图 - **Markets**: Apply on SPY, QQQ, or IWM | 应用于SPY/QQQ/IWM - **Mode**: Start with "Standard" | 建议从"标准"模式开始 ### Intraday Mode | 日内模式 The indicator automatically detects intraday timeframes and adjusts: - Uses only RSI + Volume factors (TW/FI are daily-only data) - Lowers signal thresholds accordingly 指标会自动检测日内周期并调整： - 仅使用 RSI + 成交量因子（TW/FI 仅有日线数据） - 相应降低信号触发阈值 --- ## Dashboard | 仪表盘 Displays real-time factor breakdown: ``` ┌────────┬───────┬────────┐ │ Factor │ Score │ Weight │ ├────────┼───────┼────────┤ │ RSI │ 1.0 │ 1x │ │ FI(50D)│ 2.0 │ Bottom │ │ TW(20D)│ -1.0 │ Top │ │ Vol │ 1.0 │ 1x │ │ Trend │ ↑ │ 10MA │ ├────────┼───────┼────────┤ │ Total │ 3.0 │ HOLD │ └────────┴───────┴────────┘ ``` --- ## Alerts | 警报 Available alerts for each market (SPY/QQQ/IWM): - Panic Low / Buy Zone (entry signals) - Reduce / Caution (exit signals) - Resonance Buy / Risk (cross-market confirmation) 每个市场（SPY/QQQ/IWM）可设置以下警报： - 恐慌低点 / 低吸区（入场信号） - 减仓 / 观望（出场信号） - 共振买入 / 风险（跨市场确认） --- ## Trend Filter | 趋势过滤 **Key feature**: Risk signals (CAUTION/REDUCE) only trigger when **price is below the trend MA**. When price is above MA (uptrend), the indicator shows **ELEVATED** ⭐ instead, preventing premature exits during strong rallies. **核心功能**：风险信号（观望/减仓）仅在 **价格跌破趋势均线** 时触发。 当价格在均线之上（上升趋势）时，指标显示 **高估** ⭐，避免在强势上涨中过早离场。 --- ## Disclaimer | 免责声明 This indicator is for **educational and informational purposes only**. It is not financial advice. Past performance does not guarantee future results. Always do your own research and consider your risk tolerance before trading. 本指标仅供 **教育和参考用途**，不构成投资建议。历史表现不代表未来收益。交易前请自行研究并考虑风险承受能力。 --- ## License | 许可 MIT License - Free to use and modify with attribution. MIT 许可证 - 可自由使用和修改，请注明出处。 --- ## Author | 作者 Built with ❤️ for the trading community. 为交易社区精心打造 ❤️
مؤشر Pine Script®
من ‎aaajiao‎
Density Zones (GM Crossing Clusters) + QHO Spin FlipsINDICATOR NAME Density Zones (GM Crossing Clusters) + QHO Spin Flips OVERVIEW This indicator combines two complementary ideas into a single overlay: *this combines my earlier Geometric Mean Indicator with the Quantum Harmonic Oscillator (Overlay) with additional enhancements* 1) Density Zones (GM Crossing Clusters) A “Density Zone” is detected when price repeatedly crosses a Geometric Mean equilibrium line (GM) within a rolling lookback window. Conceptually, this identifies regions where the market is repeatedly “snapping” across an equilibrium boundary—high churn, high decision pressure, and repeated re-selection of direction. 2) QHO Spin Flips (Regression-Residual σ Breaches) A “Spin Flip” is detected when price deviates beyond a configurable σ-threshold (κ) from a regression-based equilibrium, using normalized residuals. Conceptually, this marks excursions into extreme states (decoherence / expansion), which often precede a reversion toward equilibrium and/or a regime re-scaling. These two systems are related but not identical: - Density Zones identify where equilibrium crossings cluster (a “singularity”/anchor behavior around GM). - Spin Flips identify when price exceeds statistically extreme displacement from the regression equilibrium (LSR), indicating expansion beyond typical variance. CORE CONCEPTS AND FORMULAS SECTION A — GEOMETRIC MEAN EQUILIBRIUM (GM) We define two moving averages: (1) MA1_t = SMA(close_t, L1) (2) MA2_t = SMA(close_t, L2) We define the equilibrium anchor as the geometric mean of MA1 and MA2: (3) GM_t = sqrt( MA1_t * MA2_t ) This GM line acts as an equilibrium boundary. Repeated crossings are interpreted as high “equilibrium churn.” SECTION B — CROSS EVENTS (UP/DOWN) A “cross event” is registered when the sign of (close - GM) changes: Define a sign function s_t: (4) s_t = +1 if close_t > GM_t -1 if close_t < GM_t s_{t-1} if close_t == GM_t (tie-breaker to avoid false flips) Then define the crossing event indicator: (5) crossEvent_t = 1 if s_t != s_{t-1} 0 otherwise Additionally, the indicator plots explicit cross markers: - Cross Above GM: crossover(close, GM) - Cross Below GM: crossunder(close, GM) These provide directional visual cues and match the original Geometric Mean Indicator behavior. SECTION C — DENSITY MEASURE (CROSSING CLUSTER COUNT) A Density Zone is based on the number of cross events occurring in the last W bars: (6) D_t = Σ_{i=0..W-1} crossEvent_{t-i} This is a “crossing density” score: how many times price has toggled across GM recently. The script implements this efficiently using a cumulative sum identity: Let x_t = crossEvent_t. (7) cumX_t = Σ_{j=0..t} x_j Then: (8) D_t = cumX_t - cumX_{t-W} (for t >= W) cumX_t (for t < W) SECTION D — DENSITY ZONE TRIGGER We define a Density Zone state: (9) isDZ_t = ( D_t >= θ ) where: - θ (theta) is the user-selected crossing threshold. Zone edges: (10) dzStart_t = isDZ_t AND NOT isDZ_{t-1} (11) dzEnd_t = NOT isDZ_t AND isDZ_{t-1} SECTION E — DENSITY ZONE BOUNDS While inside a Density Zone, we track the running high/low to display zone bounds: (12) dzHi_t = max(dzHi_{t-1}, high_t) if isDZ_t (13) dzLo_t = min(dzLo_{t-1}, low_t) if isDZ_t On dzStart: (14) dzHi_t := high_t (15) dzLo_t := low_t Outside zones, bounds are reset to NA. These bounds visually bracket the “singularity span” (the churn envelope) during each density episode. SECTION F — QHO EQUILIBRIUM (REGRESSION CENTERLINE) Define the regression equilibrium (LSR): (16) m_t = linreg(close_t, L, 0) This is the “centerline” the QHO system uses as equilibrium. SECTION G — RESIDUAL AND σ (FIELD WIDTH) Residual: (17) r_t = close_t - m_t Rolling standard deviation of residuals: (18) σ_t = stdev(r_t, L) This σ_t is the local volatility/width of the residual field around the regression equilibrium. SECTION H — NORMALIZED DISPLACEMENT AND SPIN FLIP Define the standardized displacement: (19) Y_t = (close_t - m_t) / σ_t (If σ_t = 0, the script safely treats Y_t = 0.) Spin Flip trigger uses a user threshold κ: (20) spinFlip_t = ( |Y_t| > κ ) Directional spin flips: (21) spinUp_t = ( Y_t > +κ ) (22) spinDn_t = ( Y_t < -κ ) The default κ=3.0 corresponds to “3σ excursions,” which are statistically extreme under a normal residual assumption (even though real markets are not perfectly normal). SECTION I — QHO BANDS (OPTIONAL VISUALIZATION) The indicator optionally draws the standard σ-bands around the regression equilibrium: (23) 1σ bands: m_t ± 1·σ_t (24) 2σ bands: m_t ± 2·σ_t (25) 3σ bands: m_t ± 3·σ_t These provide immediate context for the Spin Flip events. WHAT YOU SEE ON THE CHART 1) MA1 / MA2 / GM lines (optional) - MA1 (blue), MA2 (red), GM (green). - GM is the equilibrium anchor for Density Zones and cross markers. 2) GM Cross Markers (optional) - “GM↑” label markers appear on bars where close crosses above GM. - “GM↓” label markers appear on bars where close crosses below GM. 3) Density Zone Shading (optional) - Background shading appears while isDZ_t = true. - This is the period where the crossing density D_t is above θ. 4) Density Zone High/Low Bounds (optional) - Two lines (dzHi / dzLo) are drawn only while in-zone. - These bounds bracket the full churn envelope during the density episode. 5) QHO Bands (optional) - 1σ, 2σ, 3σ shaded zones around regression equilibrium. - These visualize the current variance field. 6) Regression Equilibrium (LSR Centerline) - The white centerline is the regression equilibrium m_t. 7) Spin Flip Markers - A circle is plotted when |Y_t| > κ (beyond your chosen σ-threshold). - Marker size is user-controlled (tiny → huge). HOW TO USE IT Step 1 — Pick the equilibrium anchor (GM) - L1 and L2 define MA1 and MA2. - GM = sqrt(MA1 * MA2) becomes your equilibrium boundary. Typical choices: - Faster equilibrium: L1=20, L2=50 (default-like). - Slower equilibrium: L1=50, L2=200 (macro anchor). Interpretation: - GM acts like a “center of mass” between two moving averages. - Crosses show when price flips from one side of equilibrium to the other. Step 2 — Tune Density Zones (W and θ) - W controls the time window measured (how far back you count crossings). - θ controls how many crossings qualify as a “density/singularity episode.” Guideline: - Larger W = slower, broader density detection. - Higher θ = only the most intense churn is labeled as a Density Zone. Interpretation: - A Density Zone is not “bullish” or “bearish” by itself. - It is a condition: repeated equilibrium toggling (high churn / high compression). - These often precede expansions, but direction is not implied by the zone alone. Step 3 — Tune the QHO spin flip sensitivity (L and κ) - L controls regression memory and σ estimation length. - κ controls how extreme the displacement must be to trigger a spin flip. Guideline: - Smaller L = more reactive centerline and σ. - Larger L = smoother, slower “field” definition. - κ=3.0 = strong extreme filter. - κ=2.0 = more frequent flips. Interpretation: - Spin flips mark when price exits the “normal” residual field. - In your model language: a moment of decoherence/expansion that is statistically extreme relative to recent equilibrium. Step 4 — Read the combined behavior (your key thesis) A) Density Zone forms (GM churn clusters): - Market repeatedly crosses equilibrium (GM), compressing into a bounded churn envelope. - dzHi/dzLo show the envelope range. B) Expansion occurs: - Price can release away from the density envelope (up or down). - If it expands far enough relative to regression equilibrium, a Spin Flip triggers (|Y| > κ). C) Re-coherence: - After a spin flip, price often returns toward equilibrium structures: - toward the regression centerline m_t - and/or back toward the density envelope (dzHi/dzLo) depending on regime behavior. - The indicator does not guarantee return, but it highlights the condition where return-to-field is statistically likely in many regimes. IMPORTANT NOTES / DISCLAIMERS - This indicator is an analytical overlay. It does not provide financial advice. - Density Zones are condition states derived from GM crossing frequency; they do not predict direction. - Spin Flips are statistical excursions based on regression residuals and rolling σ; markets have fat tails and non-stationarity, so σ-based thresholds are contextual, not absolute. - All parameters (L1, L2, W, θ, L, κ) should be tuned per asset, timeframe, and volatility regime. PARAMETER SUMMARY Geometric Mean / Density Zones: - L1: MA1 length - L2: MA2 length - GM_t = sqrt(SMA(L1)*SMA(L2)) - W: crossing-count lookback window - θ: crossing density threshold - D_t = Σ crossEvent_{t-i} over W - isDZ_t = (D_t >= θ) - dzHi/dzLo track envelope bounds while isDZ is true QHO / Spin Flips: - L: regression + residual σ length - m_t = linreg(close, L, 0) - r_t = close_t - m_t - σ_t = stdev(r_t, L) - Y_t = r_t / σ_t - spinFlip_t = (|Y_t| > κ) Visual Controls: - toggles for GM lines, cross markers, zone shading, bounds, QHO bands - marker size options for GM crosses and spin flips ALERTS INCLUDED - Density Zone START / END - Spin Flip UP / DOWN - Cross Above GM / Cross Below GM SUMMARY This indicator treats the Geometric Mean as an equilibrium boundary and identifies “Density Zones” when price repeatedly crosses that equilibrium within a rolling window, forming a bounded churn envelope (dzHi/dzLo). It also models a regression-based equilibrium field and triggers “Spin Flips” when price makes statistically extreme σ-excursions from that field. Used together, Density Zones highlight compression/decision regions (equilibrium churn), while Spin Flips highlight extreme expansion states (σ-breaches), allowing the user to visualize how price compresses around equilibrium, releases outward, and often re-stabilizes around equilibrium structures over time.
مؤشر Pine Script®
من ‎Eyemaginative‎
Proxy Index [MTF]Description This indicator is a specialized implementation of the Proxy Index, a market timing tool originally conceptualized by Larry Williams. It is designed to identify potential market reversals by analyzing the relationship between price momentum and real volatility. Unlike standard oscillators that look at absolute price levels, the Proxy Index measures the duration and intensity of price movement relative to the asset's specific volatility. Underlying Concepts & Methodology The script operates by normalizing price action against volatility. The calculation logic is as follows: Momentum Component: The script first calculates the net movement of each bar (Close minus Open) to determine the true directional strength, ignoring gaps. Smoothing: This raw momentum is smoothed using a Moving Average (default 8-period) to filter out market noise. Volatility Normalization (ATR): The smoothed value is then divided by the Average True Range (ATR). Significance: This step adjusts the indicator for changing market conditions. A 50-point move is treated differently in a low-volatility environment versus a high-volatility one. MTF Dashboard: A built-in table monitors this calculation across Daily, Weekly, and Monthly timeframes simultaneously. How to Use Buy Zone (≤ 30): Indicates the asset is historically cheap/oversold relative to its recent volatility. Sell Zone (≥ 70): Indicates the asset is historically expensive/overbought relative to its recent volatility. Divergences: Strong signals occur when Price makes a new High/Low, but the Proxy Index fails to confirm it, indicating exhaustion. Settings Timeframes: Fully customizable MTF table. Colors: Dynamic coloring based on Overbought/Oversold zones. Portugês Descrição Este indicador é uma implementação especializada do Proxy Index, uma ferramenta de timing de mercado originalmente conceituada por Larry Williams. Ele foi projetado para identificar potenciais reversões de mercado analisando a relação entre o momentum do preço e a volatilidade real. Ao contrário de osciladores padrão, o Proxy Index mede a duração e intensidade do movimento do preço em relação à volatilidade específica do ativo. Metodologia Componente de Momentum: Calcula o movimento líquido da barra (Fechamento - Abertura). Normalização pela Volatilidade: O valor é dividido pelo ATR (Average True Range). Isso ajusta o indicador para as condições atuais do mercado. Tabela MTF: Monitora esses dados em múltiplos tempos gráficos simultaneamente. Como Usar Zona de Compra (≤ 30): Ativo "barato" em relação à volatilidade. Zona de Venda (≥ 70): Ativo "caro" em relação à volatilidade. 3. Categorias (Categories) Marque estas 3 opções (são as que melhor descrevem a matemática do script): ✅ Volatility (Volatilidade) - Pois usa ATR. ✅ Oscillators (Osciladores) - Pois oscila entre 0 e 100. ✅ Trend Analysis (Análise de Tendência) - Pois identifica reversões.
مؤشر Pine Script®
من ‎marcaoemail_1‎
Valuation Multi-Asset [MTF]Description This indicator is a specialized Intermarket Analysis tool designed to determine the relative valuation of an asset by comparing its performance against key global benchmarks (Currency, Commodities, Bonds, and Sector ETFs). Unlike standard oscillators (like RSI) that only look at the asset's own price, this script calculates a Relative Value Index. Underlying Concepts & Methodology The script operates on the principle of asset correlation and mean reversion ratios. The calculation logic follows these steps: Ratio Calculation: It computes the price ratio between the Chart Asset and a Benchmark Asset (e.g., Symbol / DXY). Smoothing: It applies a double smoothing method using Exponential Moving Averages (EMAs) to filter out short-term noise from the ratio. Historical Normalization: Based on valuation theories (inspired by concepts like Larry Williams' valuation window), the script normalizes the smoothed ratio over a user-defined lookback period (default is 3 years/156 weeks). This ranks the current relative value between 0 and 100. Key Features Multi-Benchmark Comparison: Automatically compares the asset against the Dollar Index (DXY), Gold (GC1!), Bonds (ZB1!), and Sector ETFs. MTF Dashboard: Includes a Multi-Timeframe table to see valuation status across Daily, Weekly, and Monthly views simultaneously. ETF Reference: A built-in reference table to help you quickly find the correct Sector ETF for stock correlation. How to Use Undervalued Zone (< 15): When the line turns Green (or enters the bottom zone), the asset is historically cheap relative to the benchmark. This often indicates a potential accumulation or reversal point. Overvalued Zone (> 85): When the line turns Red (or enters the top zone), the asset is historically expensive relative to the benchmark, suggesting potential distribution. Divergences: Watch for divergences between the asset price and the Valuation Index (e.g., Price makes a new high, but the Valuation Index against Gold makes a lower high). Settings You can toggle individual benchmark lines (Asset 1 to 4). Adjust the "Lookback Period" to change the historical normalization window. Customize the Overbought/Oversold thresholds.
مؤشر Pine Script®
من ‎marcaoemail_1‎
SVTR [Ultimate]SVTR v1.0 is a fully automated trading strategy designed to identify high-probability market opportunities using structured momentum, trend validation, and risk-controlled execution logic. This strategy is not a simple signal generator. It is a complete decision engine that evaluates market conditions, confirms entries with multiple filters, and manages trades automatically according to predefined logic. Built for traders who want consistency, discipline, and objective execution, SVTR removes emotional bias and delivers rule-based trading across different market environments. KEY FEATURES • Fully automated entry and exit logic • Multi-layer confirmation system • Momentum and trend validation • Smart trade filtering to reduce noise • Works on multiple markets and timeframes • Non-repainting logic • Alert-ready for automation and integrations AUTOMATED STRATEGY LOGIC SVTR continuously analyzes the market and only executes trades when all required conditions align. This prevents overtrading and avoids weak or low-quality setups. The strategy is designed to: Enter when momentum and direction are confirmed Avoid choppy and uncertain market phases Exit trades based on objective, rule-driven logic Maintain consistency regardless of emotions or bias WHY THIS STRATEGY? Most traders fail not because of bad ideas, but because of: Late entries Emotional decisions Overtrading Lack of discipline SVTR v1.0 solves these problems by automating the decision process and executing trades exactly as designed, every time. You trade the system. Not your emotions. WHO IS IT FOR? • Traders looking for automated execution • System-based and rule-driven traders • Swing traders and intraday traders • Traders who want consistency over discretion • Users who want a ready-to-use strategy framework IMPORTANT NOTES • Invite-Only / Private access • Source code is protected • Designed for backtesting, automation, and live monitoring • Strategy behavior may vary depending on market conditions and settings VERSION v1.0 – Initial Private Release Future updates may include optimizations, additional filters, and performance improvements. FINAL STATEMENT SVTR v1.0 is built for traders who value structure, confirmation, and automation over guesswork. If you are looking for a strategy that executes with discipline, filters weak setups, and operates as a complete automated system, this strategy is designed for you.
استراتيجية Pine Script®
من ‎Mo1ra‎
2
VLinerMarket R1"VLiner Market R1" is our debut volume analysis tool designed to provide traders with comprehensive market insights through basic volume analysis - Delta volume. Inspired by the principles of an Order-Flow Trader. Further details: Market R1 features a unique design approach that combines two powerful analytical components, Volume Oscillator and Delta Bubbles (tick-volume). The VO tracks 15-minute candle momentum using white/orange color coding. Whilst the Delta Bubbles track 30-minute candle buy/sell pressure. Documents: The full User's manual for the use and concepts of this indicator is available on MT Blue's website : mtblue-nsg.com R1 uses: - Tick movement volume (not real data volume) - A look-back system for *semi-stochastic oscillation (delta toning: white & orange part of the VO's line) Slight concerns: - Although it may seem to be an indicator trading tool; it is Not . This indicator only provides visualization for educational purposes, and is strictly advised Not to be use for trading/investing executions.
مؤشر Pine Script®
من ‎eugenephaolaor97‎
Resampling Reverse Engineering Bands XRREB X: Visual Oscillator Projection Bands Based on the innovative "Resampling Reverse Engineering" concept pioneered by Donovan Wall, this enhanced script fixes the core mathematical symmetry and provides anchored, non-repainting bands for reliable analysis. This indicator transforms any RSI, Stochastic, or CCI calculation directly onto your price chart as dynamic support/resistance bands. Instead of watching an oscillator below your chart, you see its overbought/oversold levels projected as price levels the market must reach. RREB X reverses standard oscillator formulas to answer one question: "What price must the market reach for my chosen oscillator to hit an extreme level like RSI=70, Stoch=80, or CCI=100?" It then plots these levels as actionable bands. Key Improvements Adjustable Oscillator Values - While the original was hard coded the reverse engineered oscillator length which limited its usefulness, this script finally allows you to visualize any length oscillator as dynamic OB/OS regions directly on the chart. Dynamic OB/OS levels: This version also lets you dynamically adjust the OB/OS levels location, making bands tighter or wider as your strategy demands. Mathematical Symmetry: Outer bands are perfect mirrors, providing reliable projected levels. Fixed Anchoring: Bands don't repaint historically, offering stable reference lines. Direct Price Translation: Oscillator overbought/oversold conditions are visualized as clear price levels. The Band Calculation Type switch lets you project different oscillator logics, each with unique characteristics for different market conditions. RRSI - General trend & momentum. Change RSI Period (e.g., 7 for fast, 21 for slow). Adjust OB/OS (e.g., 80/20 for strong trends). The bands show the price needed to push your custom RSI into overbought/oversold territory. RStoch - Ranging markets & short-term reversals. Focus on the Stochastic Period. The projected bands are highly sensitive to recent highs/lows. Excellent for spotting reversals at the edges of a range. RCCI - Strong trends & volatile markets. Use a higher Outer Bands Multiplier. CCI's lack of upper/lower bounds means bands reflect extreme momentum shifts. Great for identifying explosive breakout or breakdown levels in trends. Use Middle Band as Filter: Price above the white middle band suggests a bullish bias for long setups; below suggests bearish for shorts. Same as the 50 midline on the RSI or Stochastic or 0 for CCI. Customizing the Calculation: The power lies in changing the oscillator lengths that the bands reflect. Adjust these in the settings: Change from 14 to 7 for faster, more reactive bands, or to 21 for slower, smoother bands. Overbought/Oversold: Change from 70/30 to 80/20 for stronger-trend filters, or to 60/40 for more frequent signals. Trading the Bands: Bands as Dynamic S/R: The solid cyan (Upper 100) and magenta (Lower 0) bands act as dynamic support and resistance. A touch and reversal can signal a trade. Gradient as Momentum: The colored fills between bands visually represent the "pressure" needed to reach the next oscillator level. Middle Band as Trend Filter: Price above the white middle band suggests a bullish bias for long setups; below suggests bearish for short setups.
مؤشر Pine Script®
من ‎NathanielJens‎
Take Profit XTake Profit X Take Profit X solves the #1 problem in trading: knowing when to exit. Instead of guessing or using single indicators, it aggregates 8 technical signals to identify high-probability exit points through multi-confirmation consensus. This eliminates premature exits and emotional decision-making. The indicator counts confirmations from your chosen technical tools: Green dot = Multiple signals say "take profit on longs/exit shorts" Red dot = Multiple signals say "take profit on shorts/exit longs" Signals appear when you reach the minimum confirmations threshold you set. Possible Settings: Conservative (Swing Trading) pine Minimum Confirmations: 4 Use: RSI, MACD, CCI, Supertrend, Price Action Disable: Stochastic, Bollinger Bands, EMA Cross Look Back Bars: 10 Aggressive (Day Trading) pine Minimum Confirmations: 2 Use: All indicators ON Look Back Bars: 3-5 RSI OB/OS: 75/25 Balanced (Most Markets) pine Minimum Confirmations: 3 Use: RSI, MACD, CCI, Supertrend Price Action: ON Look Back Bars: 5-7
مؤشر Pine Script®
من ‎NathanielJens‎
Ultimate Adaptive RSIUltimate Adaptive RSI RSI That Adapts to Any Market This isn't your grandpa's RSI. It dynamically adjusts its sensitivity based on market conditions—smoother in trends, responsive in ranges. Traditional RSI fails in strong trends and changing volatility. UA-RSI fixes both by adapting its sensitivity in real-time, giving you reliable signals whether the market is trending, ranging, or transitioning between regimes. How It Adapts: Smart Pre-Smoothing: Uses Efficiency Ratio to detect trend strength and automatically lengthens/shortens its smoothing window. Dominant Cycle Detection: Matches its internal period to the market's actual rhythm. Dynamic Bands: RMS-based overbought/oversold levels that expand/contract with volatility. Smoothing Stack: ALMA pre-smoothing → Ultimate Smoother → Jurik filter creates the cleanest RSI you've ever seen. Trade Signals: Buy: RSI crosses above lower band or midline + price confirms Sell: RSI crosses below upper band or midline + price confirms Bands expand in high volatility → wait for deeper extremes Bands contract in low volatility → take earlier signals Signal line for crossover entries Adaptive smoothing = fewer false signals in trends Day trading: Use 1.0 band multiplier Swing trading: Use 1.2-1.5 multiplier Ranging markets: Lower multiplier to 0.8 Trending markets: Raise multiplier to 1.5+ Bands widen in volatility = wait for deeper extremes Bands tighten in calm markets = take earlier signals Never trade RSI alone - always wait for price confirmation
مؤشر Pine Script®
من ‎NathanielJens‎
Hybrid Confluence (RSI,MFI,StochRSI) Two-Tier Momentum Framework Many traders explore multi-oscillator hybrid confluence approaches that combine momentum and volume signals—most commonly RSI, Money Flow Index (MFI), and Stochastic RSI—to study stretched market conditions. These hybrid concepts are widely used to analyze potential exhaustion zones, cycle extremes, and periods of sustained buying or selling pressure across different timeframes. This script does not replicate, reverse-engineer, or replace any paid or closed-source indicator. Instead, it provides a fully transparent framework built exclusively from standard, well-documented technical indicators. All calculations are explicit and configurable, allowing traders to study hybrid momentum behavior without relying on proprietary logic or black-box tools. What the Script Does 1. Builds a hybrid momentum confluence model The script combines three widely used oscillators: • RSI (Relative Strength Index) — price momentum • MFI (Money Flow Index) — volume-weighted momentum • Stochastic RSI — momentum relative to its own recent range Each component operates on a normalized 0–100 scale, allowing meaningful comparison and aggregation. 2. Implements a clear two-tier signal structure Instead of producing a single binary buy/sell output, the script separates early pressure from extreme conditions: 2-of-3 Confluence (Setups) When any two of the three oscillators reach oversold or overbought levels: • Displayed as semi-transparent circles • Indicates building pressure or a developing condition • Designed as a heads-up, not a trade signal 3-of-3 Confluence (Signals) When all three oscillators reach oversold or overbought levels: • Displayed as prominent vertical bars spanning the oscillator range • Represents extreme momentum alignment • Intended to highlight potential exhaustion zones 3. Visualizes sustained pressure using consecutive signal intensity When 3-of-3 conditions persist across multiple bars: • Each consecutive bar becomes progressively darker • Up to six discrete intensity levels • Darkness reflects duration and persistence, not prediction This helps visualize scenarios where markets continue pushing higher or lower before a major turning point, rather than assuming a single signal marks the exact top or bottom. 4. Works across markets and timeframes Because all inputs rely on standard technical indicators: • Works on crypto, equities, futures, and FX • Scales naturally from intraday to higher timeframes • Can be used on Daily and multi-day charts for macro context Why This Script Is Useful Traditional oscillators often produce isolated signals that lack context. This framework adds clarity by: 1. Requiring multi-indicator agreement instead of single-signal triggers 2. Separating early pressure from extreme conditions 3. Showing how momentum can persist before a reversal 4. Avoiding binary “buy now / sell now” outputs 5. Remaining transparent and configurable This makes the tool especially useful for: • Swing traders • Macro and cycle-focused traders • Crypto traders studying extended momentum phases • Analysts who prefer contextual signals over rigid rules How to Use 1. Adjust RSI, MFI, and StochRSI lengths to suit your timeframe 2. Observe 2-of-3 circles as early warnings of building pressure 3. Watch 3-of-3 bars for extreme momentum alignment 4. Note increasing bar intensity as pressure persists 5. Combine with structure, trend, volume, or price action for decisions This script is best used as a contextual tool, not a standalone trading system. What This Script Is Not • Not a recreation of any paid or proprietary indicator • Not affiliated with any trading educator or platform • Not intended as a predictive or standalone trading system • Does not claim to identify exact tops or bottoms All signals are derived solely from openly documented RSI, MFI, and Stochastic RSI calculations. Important Notes • This script is original, with a transparent methodology • All calculations use standard, well-known technical formulas • No hidden logic or undisclosed weighting is used • Signal visuals are descriptive, not predictive Disclaimer This tool is provided for educational and analytical purposes only. It does not constitute financial advice or a recommendation to trade. Always validate settings, test on multiple assets and timeframes, and use proper risk management before trading live.
مؤشر Pine Script®
من ‎HansMolemanLFG‎