VIOP Scalping - OriginalVIOP Scalping – Original is a rule-based scalping strategy ported from an original C# logic set. It aims to trade only when trend direction, momentum, and trend strength align, then manages the position using fixed take-profit/stop-loss percentages with an optional trailing mechanism to protect gains during favorable moves.
This strategy is provided for educational and backtesting purposes only. It is not financial advice and does not guarantee profitability. Always test thoroughly before any live usage.
Core Concept
Follow the dominant WMA trend, confirm momentum with EMA separation, filter conditions with RSI + ADX, then exit using fixed TP/SL with trailing behavior after a defined profit threshold.
How the Strategy Works
Trend Direction is defined by WMA: above WMA = long bias, below WMA = short bias.
Momentum is measured via Fast EMA vs Slow EMA and the EMA difference.
Trend Strength is confirmed using ADX (must exceed a threshold).
RSI filters trades to avoid entering when momentum is likely overextended or weak.
A no-trade session blocks entries during a predefined time window (default 09:30–10:05).
Exit logic uses fixed percent TP/SL, with an optional trailing mechanism that activates after a profit threshold.
Inputs and Settings
Trend and Indicator Settings
Main Trend WMA: Determines directional bias (price above = long, price below = short).
Fast EMA / Slow EMA: Used to measure momentum and directional separation.
RSI Period: Filters entries based on RSI range constraints.
ADX Period: Measures trend strength (must exceed threshold to allow entries).
Threshold Settings
EMA Difference Threshold: Minimum EMA separation required to validate momentum.
ADX Threshold: Minimum ADX required to confirm trend strength.
RSI Long Ceiling: RSI must remain below this value for long entries.
RSI Short Floor: RSI must remain above this value for short entries.
Risk Management Settings
Take Profit %: Default TP distance in percent.
Strong Trend Take Profit %: Higher TP used when a “strong trend” condition is detected.
Stop Loss %: Fixed SL distance in percent.
Trailing Activation %: Profit threshold at which trailing starts.
Trailing Distance %: Trailing offset distance used once trailing is active.
Time Filter
No-Trade Hours: Default session is 09:30–10:05. During this window, the strategy does not open new trades.
Entry Logic
No-Trade Time Filter
If the current bar falls inside the no-trade session, entries are blocked.
Long Entry Conditions
Price is above the WMA trend line.
EMA difference is positive and greater than the EMA Difference Threshold.
EMA momentum is increasing (current EMA diff > previous EMA diff).
RSI is within the defined range (RSI > 48 and RSI < RSI Long Ceiling).
Close is higher than the previous close.
ADX is above the ADX Threshold.
Short Entry Conditions
Price is below the WMA trend line.
EMA difference is negative and lower than -EMA Difference Threshold.
Bearish momentum is increasing (current EMA diff < previous EMA diff).
RSI is within the defined range (RSI < 52 and RSI > RSI Short Floor).
Close is lower than the previous close.
ADX is above the ADX Threshold.
Strong Trend Logic (Dynamic TP Selection)
If price is far from the WMA (absolute distance > 20 points) AND EMA separation is strong (absolute EMA diff > 1.5 points), the strategy treats the environment as a strong trend.
In strong trend mode, the strategy uses “Strong Trend Take Profit %” instead of the default “Take Profit %”.
Exit Management (TP/SL + Trailing)
The strategy uses fixed percentage-based TP and SL levels.
Trailing logic is enabled via strategy.exit and activates only after price moves in profit by the defined Trailing Activation %.
Once activated, trailing follows price using the defined Trailing Distance % offset.
This is designed to secure partial gains during extended moves while still allowing room for continuation.
What You See on the Chart
WMA Trend Line (Main Trend Filter).
Fast EMA and Slow EMA (Momentum Confirmation).
Strategy entry/exit markers generated by TradingView.
Recommended Use
Scalping systems that rely on trend-following and momentum confirmation.
Markets where ADX filtering helps avoid choppy conditions.
Traders who want a simple, parameter-driven TP/SL system with trailing after confirmation.
Important Notes
The no-trade session depends on your chart/session settings. Ensure your symbol/session configuration matches your intended market hours.
Percent-based exits scale with price; results will vary across instruments and volatility regimes.
Always validate behavior using bar replay, forward testing, and realistic commission/slippage assumptions.
المتوسطات المتحركة
VIOP Scalping - ATR SNIPERVIOP Scalping – ATR SNIPER is a momentum-based scalping strategy designed to capture short, high-probability moves while keeping risk strictly defined using ATR-based stop-loss and fixed risk/reward targets. The strategy trades only when trend direction, momentum, and strength are aligned.
This script is provided for educational and testing purposes only. It does not guarantee profitability and must be used with proper risk management.
Core Idea
Trade in the direction of the dominant trend, confirm momentum acceleration, and manage risk using ATR-based dynamic stops and targets.
How the Strategy Works
The main trend is defined using a Weighted Moving Average (WMA).
Momentum is measured by the distance and direction between a fast EMA and a slow EMA.
Trend strength is confirmed using ADX.
RSI is used as a filter to avoid weak or overextended market conditions.
Entries are blocked during a predefined no-trade time window to avoid high-noise periods.
Long Entry Conditions
Fast EMA is above Slow EMA and the EMA difference is greater than the minimum threshold.
EMA momentum is increasing compared to the previous bar.
RSI is within the user-defined long range.
Current close is higher than the previous close.
ADX is above the minimum strength threshold.
Price is above the WMA trend line.
The current bar is not inside the no-trade session.
Short Entry Conditions
Fast EMA is below Slow EMA and the EMA difference is below the negative threshold.
Bearish EMA momentum is increasing.
RSI is within the user-defined short range.
Current close is lower than the previous close.
ADX is above the minimum strength threshold.
Price is below the WMA trend line.
The current bar is not inside the no-trade session.
Risk Management – ATR Sniper Logic
Stop-loss distance is calculated as ATR multiplied by the ATR Multiplier.
Take-profit distance is calculated using the defined Risk/Reward ratio.
Stop-loss and take-profit levels are dynamically calculated per trade.
Only one position can be open at any given time.
What You See on the Chart
Weighted Moving Average (WMA) trend line.
Fast EMA and Slow EMA lines.
Dynamic stop-loss line during active trades.
Dynamic take-profit line during active trades.
Recommended Use
Intraday scalping on VİOP instruments.
Momentum-based short-term trading.
Traders who prefer rule-based systems with strict risk control.
Always backtest and forward-test on your own instruments and timeframes before using this strategy in live markets.
AlKa mAMoving Averages
Slope of Moving Averages as Strength Factor
Always In as Strength Factor
Band of Mean with buy and sell zones, lines or highlight.
Algomist - Adaptive Velocity Cross🚀 Algomist: The Adaptive Velocity Cross (AVC)
Automate Your Edge
This strategy transcends the limitations of classic Moving Average (MA) crossovers. The Adaptive Velocity Cross (AVC) is a state-of-the-art trend-following system designed for automated execution, filtering out low-probability whipsaws and prioritizing high-momentum breakouts in volatile markets.
It's not just a signal generator; it's a fully automated, risk-managed trading plan that delivers structured trade signals directly to your Algomist account.
🔥 Key Features & Technology
Adaptive Hull Moving Averages (HMA): Utilizes the Hull MA to significantly reduce lag compared to standard EMAs and SMAs. The faster and slower HMAs provide a highly responsive gauge of short-term and medium-term trend direction.
Multi-Layer Volatility Filtering: Trades are strictly prohibited during flat, low-volatility market conditions.
Current Timeframe Filter (ATRMinFilter): Ensures trades only fire when current market momentum is strong enough to carry the trend.
Higher Timeframe Filter: Checks the ATR on a higher timeframe (e.g., 1H) to confirm the structural trend strength, preventing entries during tight squeezes.
Visual Trend Velocity: The space between the Fast (Blue) and Slow (Pink) HMAs is colored and filled, providing an immediate visual cue for trend direction and strength (width of the band).
Asymmetric Risk Management: Uses the dynamic Average True Range (ATR) to calculate Stop Loss and Take Profit levels, ensuring risk and reward are proportional to current market volatility.
⚙️ How It Works (The Logic)
The AVC only executes a trade when all three high-conviction criteria are met:
Trend Signal: The Fast $\text{HMA}$ crosses the Slow $\text{HMA}$ (Crossover).
Volatile Market Confirmation: The market must be sufficiently volatile on both the current timeframe and the higher structural timeframe ($\text{ATR}$ filters passed).
Risk Management: A defined $\text{SL}$ (Stop Loss) and $\text{TP}$ (Take Profit) are calculated based on the current market $\text{ATR}$ to manage the position before entry.
🤖 Automation Ready
The strategy is built with automation as the priority. Upon a confirmed entry, the script sends a cleanly formatted JSON string via a TradingView Webhook alert to Algomist. Create your account and get your own web hook @ www.algomist.app
Example Alert Output:
{
"symbol": "ETHUSDC",
"side": "LONG",
"entry_price": 67500.0,
"stop_loss": 66000.0,
"take_profit": 70000.0,
"timestamp": 1766715660462
}
This signal is ready for immediate consumption by your Algomist execution engine, ensuring lightning-fast and error-free order placement.
📊 Recommended Use
Asset Class: Highly effective on high-liquidity, high-volatility assets (e.g., Crypto Majors, Forex Pairs, Indices).
Timeframes: Works best on 1m to 15 min charts.
Risk Profile: Medium-to-High frequency trend-following system.
Disclaimer: The strategy code provided is for informational and educational purposes. Past performance is not indicative of future results. Always backtest and forward-test any automated strategy extensively before using real capital.
Moving Averages Lens - Algoat_Alpha// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
// █ Algoat_Alpha || TREND SYSTEM v2.0 █
// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
█ INTRODUCTION
Welcome to the Algoat_Alpha MA Lens.
Moving Averages are the backbone of technical analysis, but a cluttered chart with random lines is useless. We built the MA Lens to strip away the noise and tell you exactly who is controlling the market.
This is not just a set of lines; it is an educational overlay that helps you understand market psychology at a glance—from high-frequency scalpers to long-term institutional investors.
█ WHAT DOES IT DO?
The MA Lens projects 6 key institutional moving averages onto your chart with zero configuration required. It color-codes the market structure, provides Smart Tooltips for education, and includes a built-in Alert System so you never miss a move.
█ KEY FEATURES
1. 🧠 Smart Tooltips (Interactive Learning) Hover over any label to see exactly what that Moving Average represents.
Example: Hover over the MA 10 to see "The Scalper's Pulse" – identifying high-frequency liquidity zones.
Understand why price is reacting at specific levels, rather than just guessing.
2. 🔔 Integrated Alert System Stop staring at the screen. We have included robust alert functionality directly in the script.
Crossover Alerts: Get notified instantly when price crosses key institutional levels (like the 200 MA).
Momentum Shifts: Set alerts for when short-term trends (MA 10/20) realign, allowing you to catch the breakout early.
3. 🎯 The "Lens" View (6-Layer Analysis) We automatically plot the most respected levels in trading:
MA 10 & 20: Short-term momentum (Scalpers & Day Traders).
MA 50: The "Swing Trader's Line."
MA 100, 150, 200: Major institutional support/resistance zones.
█ HOW TO USE
Add to Chart: Apply the script to any timeframe.
Read the Trend:
If price is above the Yellow/Red lines (MA 150/200), the long-term trend is Bullish.
If price is holding the Blue/Green lines (MA 10/20), momentum is strong.
Set Alerts:
Click the "Alert" button in TradingView, select this indicator, and choose your preferred condition (e.g., "Price Crossing MA 200") to get notified on your phone or desktop.
█ BOOST & SHARE
OzCobbs MACD-CCI with DivergenceOzCobbs MACD-CCI with Divergence combines the most useful behaviour of MACD and CCI into a single adaptive indicator, designed to highlight true momentum extremes rather than fixed, arbitrary levels.
This tool is built for traders looking for a Goldilocks solution, not too simple, not over-engineered, just enough structure to reveal when market behaviour becomes abnormal.
Instead of static overbought or oversold zones, both MACD and CCI use statistically derived outlier bands that automatically adjust to the instrument, timeframe, and volatility regime. This makes extremes meaningful, comparable, and consistent across markets.
The indicator can be used in two ways:
Merged mode, where MACD and CCI are overlaid into one cohesive view of momentum and stretch.
Split mode, by adding the indicator twice, setting one instance to MACD and the other to CCI, allowing focused analysis of each component.
Optional CCI divergence detection is also included to help identify momentum exhaustion at statistically significant extremes, without clutter or hidden divergence noise.
The default settings are great, but it is fully customisable and adaptable to suit individual trading styles - simply tweak, turn on/off whatever you feel is needed to improve YOU.
Enjoy
EMA base Market Trend Analysis I this script you will get info about the trends in multiple time frames to make a view about the market. I am mainly using the EMA for this 8 and 33 EMA. This script is a extra assistant to make your perspective about the market. Do your own research before adding to your arsenal.
Gold scalper 1 min or 30 sec V2Gold Scalper V2 is a precision scalping tool designed for XAUUSD, combining classic trend-following with a unique "Hybrid Tick-Flow" capability.
🔥 Core Features:
Golden Ratio Ribbon: A sequence of Fibonacci EMAs (5 to 144) to visually identify strong trends and dynamic support/resistance zones.
Stoch RSI Trigger: Precise entry timing using Stoch RSI crossovers specifically in Overbought/Oversold zones.
Multi-Timeframe Breakout Filter: Filters out bad signals by ensuring price is breaking new highs or lows on a higher timeframe.
💡 The "Secret Weapon": Tick Chart Alarms on 1-Sec Chart This script solves a major limitation on TradingView regarding alerts on Tick Charts.
The Setup: Open your chart on the 1-second (1s) timeframe.
The Hack: In the indicator settings, set the "Filter Timeframe" to "1000T" (or any Tick value).
The Advantage: The script pulls structure data (High/Low) from the 1000 Tick chart (Volume-based structure) but runs the logic on the 1-second chart (Time-based).
Result: You get the precision of Tick Chart analysis WITH functional Server-Side Alerts provided by the 1-second timeframe.
🛠 Strategy Logic:
🟢 LONG (Buy): Trend Ribbon is Green + Stoch RSI Crossup (<20) + Price breaks above the previous Filter High (e.g., 1000T High).
🔴 SHORT (Sell): Trend Ribbon is Red + Stoch RSI Crossdown (>80) + Price breaks below the previous Filter Low (e.g., 1000T Low).
Warning: This script is designed for high-frequency scalping. Please manage your risk properly. Credit: Boss Edit / Code optimized for real-time calculation.
trend system configuration [skyeye]System Overview The Structural Trend & Fibo Nexus is a comprehensive trading system designed to bridge the gap between discretionary technical analysis and quantitative risk management. It integrates Market Structure identification, Multi-Timeframe (MTF) Momentum, and automated Risk/Reward calculation into a single chart interface.
Core Features & Calculation Logic
1. Market Structure Identification (The Backbone)
Algorithm: Utilizes a filtered ZigZag algorithm. Unlike standard ZigZags, this script incorporates a Min Swing % filter and a Min Bars duration filter.
Logic: It identifies valid Higher Highs (HH) and Lower Lows (LL) only when price moves exceed a specific volatility threshold. This effectively filters out market noise.
Visuals:
Green Background: Indicates a Bullish Structure phase.
Red Background: Indicates a Bearish Structure phase.
2. Zero-Lag Momentum Layer (The Trigger)
Algorithm: A Two-Pole Gaussian Filter.
Logic: Gaussian filters offer superior smoothness compared to Simple or Exponential Moving Averages (SMA/EMA) while significantly reducing lag. This allows for faster reaction to trend reversals without the "whipsaw" effect of noisy moving averages.
MTF Dashboard: The table in the bottom-right corner monitors the Gaussian momentum across 5 timeframes (5m to 4h) in real-time, helping traders align with the dominant trend.
3. Quantitative Risk Engine (The Execution)
Auto-Calculation: When a valid trend reversal signal occurs (Structure Flip + Momentum Cross), the script automatically projects a trade setup.
Dynamic Stop Loss (SL): Calculated using the Average True Range (ATR). This ensures the stop loss adapts to the current market volatility (wider stops in volatile markets, tighter stops in calm markets).
Take Profit (TP) Targets: Automatically projects three fixed Reward-to-Risk (R:R) targets:
TP1: 1:1 R:R
TP2: 1:1.5 R:R
TP3: 1:2 R:R
Visuals: Draws colored boxes and dashed lines on the chart to visualize the potential PnL zones immediately upon signal generation.
Strategy Guide: The "Quant Nexus" Method
Step 1: Structural Bias Observe the background color.
Trade Long only when the background is Green.
Trade Short only when the background is Red.
Step 2: Trend Alignment Check the MTF Dashboard. Ideally, the H1 and H4 timeframes should match the color of your intended trade direction (Green for Long, Purple for Short).
Step 3: Signal Execution Wait for the entry signal (indicated by the Risk/Reward boxes appearing).
Entry: At the close of the signal candle.
Stop Loss: Place your SL at the level indicated by the "Stop Loss" label (based on ATR).
Take Profit: Scale out positions at TP1, TP2, and TP3 levels.
Settings Customization
ZigZag Config: Adjust Depth and Min Swing % to tune the sensitivity of market structure.
MTF Trends: Customize the Alpha to adjust the smoothness of the Gaussian line.
Quant Risk: Toggle Use ATR SL or adjust SL Multiplier to fit your risk appetite.
Disclaimer: This tool is for educational purposes only. Automated signals should always be verified with your own analysis.
(Chinese Translation / 中文說明)
系統概述 Structural Trend & Fibo Nexus 是一套綜合交易系統，旨在縮小主觀技術分析與量化風險管理之間的差距。它將市場結構識別、多週期 (MTF) 動能和自動風險/回報計算整合到單一圖表介面中。
核心功能與計算邏輯
1. 市場結構識別 (骨幹)
演算法： 使用經過過濾的 ZigZag 演算法。與標準 ZigZag 不同，本腳本結合了「最小波動百分比」和「最小 K 線數」過濾器。
邏輯： 僅當價格變動超過特定的波動率閾值時，才會識別有效的更高高點 (HH) 和更低低點 (LL)。這有效地過濾了市場雜訊。
視覺效果：
綠色背景： 表示看漲結構階段。
紅色背景： 表示看跌結構階段。
2. 零延遲動能層 (觸發器)
演算法： 雙極高斯濾波器 (Two-Pole Gaussian Filter)。
邏輯： 與簡單或指數移動平均線 (SMA/EMA) 相比，高斯濾波器提供了卓越的平滑度，同時顯著減少了延遲。這允許對趨勢反轉做出更快的反應，而不會產生嘈雜均線的「假突破」效應。
MTF 儀表板： 右下角的表格即時監控 5 個時間週期 (5m 至 4h) 的高斯動能，幫助交易者與主趨勢保持一致。
3. 量化風控引擎 (執行)
自動計算： 當有效的趨勢反轉信號出現（結構翻轉 + 動能交叉）時，腳本會自動投射交易計畫。
動態止損 (SL)： 使用 平均真實波幅 (ATR) 計算。這確保止損能適應當前的市場波動（波動大時止損較寬，平靜時止損較窄）。
止盈 (TP) 目標： 自動投射三個固定的風險回報比 (R:R) 目標：
TP1: 1:1 盈虧比
TP2: 1:1.5 盈虧比
TP3: 1:2 盈虧比
視覺效果： 在信號產生時，立即在圖表上繪製彩色方框和虛線，以視覺化潛在的盈虧區域。
策略指南：量化共振法
第一步：結構偏差 觀察背景顏色。
背景為 綠色 時，僅考慮做多。
背景為 紅色 時，僅考慮做空。
第二步：趨勢對齊 檢查 MTF 儀表板。理想情況下，H1 和 H4 時間週期應與您的預期交易方向顏色相符（做多為綠色，做空為紫色）。
第三步：信號執行 等待進場信號（由出現的風險/回報框指示）。
進場： 在信號 K 線收盤時。
止損： 將止損設置在「Stop Loss」標籤指示的位置（基於 ATR）。
止盈： 在 TP1、TP2 和 TP3 水平分批獲利了結。
設定自定義
ZigZag 設置： 調整 Depth 和 Min Swing % 以微調市場結構的靈敏度。
MTF 趨勢： 自定義 Alpha 以調整高斯線的平滑度。
量化風控： 切換 Use ATR SL 或調整 SL Multiplier 以符合您的風險偏好。
免責聲明：本工具僅供教育用途。自動信號應始終通過您自己的分析進行驗證。
Golden Ratio Fibo Ribbon# Golden Ratio Fibo Ribbon
**Concept & Overview**
The "Golden Ratio Fibo Ribbon" is a comprehensive trend-following system designed to help traders identify the primary trend direction and find high-probability entry points during pullbacks. This script combines the power of Fibonacci Moving Averages (The Golden Ratio sequence) to visualize trend strength with the Stochastic RSI to pinpoint precise entry timing.
The core philosophy of this indicator is: **"Trade with the trend, enter on the pullback."**
---
### 🛠️ How it Works (Logic & Calculation)
**1. The Fibo Ribbon (Trend Filter)**
The trend is determined by a sequence of Moving Averages based on Fibonacci numbers: 5, 8, 13, 21, 34, 55, 89, and 144.
* **The Baseline:** The 144-period MA acts as the major trend filter.
* **The Ribbon:** Shorter-term MAs (5 to 89) create a "Ribbon."
* **Trend Definition:**
* **Uptrend (Bullish):** All shorter-term MAs are *above* the 144 MA Baseline. The ribbon is filled with **Green**.
* **Downtrend (Bearish):** All shorter-term MAs are *below* the 144 MA Baseline. The ribbon is filled with **Red**.
**2. Signal Generation (Stochastic RSI)**
Instead of taking every crossover, this script filters signals based on the trend direction established by the Ribbon.
* **Buy Signal (Long):**
* Condition 1: The Ribbon must be fully **Bullish** (Green).
* Condition 2: Stochastic RSI (K line) crosses *above* the D line.
* Condition 3: The crossover must happen in the **Oversold zone** (default < 20).
* **Sell Signal (Short):**
* Condition 1: The Ribbon must be fully **Bearish** (Red).
* Condition 2: Stochastic RSI (K line) crosses *below* the D line.
* Condition 3: The crossover must happen in the **Overbought zone** (default > 80).
---
### 🎯 How to Use
1. **Identify the Trend:** Look at the background color and the ribbon. Green indicates a strong uptrend, Red indicates a strong downtrend.
2. **Wait for Pullbacks:** Do not chase the price. Wait for the price to pull back towards the ribbon.
3. **Execute on Signals:** Look for the "BUY" or "SELL" labels. These appear when the momentum (Stoch RSI) turns back in favor of the main trend.
* *Example:* In a Green Ribbon trend, wait for the price to drop (Stoch RSI goes oversold), then buy when the "BUY" label appears.
### ⚙️ Settings
* **Ribbon Source:** Choose between EMA (Exponential) or SMA (Simple) moving averages.
* **Stoch RSI Settings:** Adjustable K, D, RSI Length, and Stochastic Length to fit different timeframes.
* **Overbought/Oversold Levels:** Customize the trigger zones (default 80/20).
### ⚠️ Disclaimer
This indicator is a technical analysis tool and does not guarantee profits. Past performance is not indicative of future results. Always use proper risk management and combine this tool with your own price action analysis.
Stage Analysis & Minervini Trend AnalysisStage Analysis & Minervini
This Pine Script indicator is a comprehensive technical analysis suite designed for traders following Mark Minervini's Trend Template and Stan Weinstein’s Stage Analysis. It automates the heavy lifting of checking moving average alignments, volume characteristics, and 52-week price relative strength.
### Key Features ###
Minervini Trend Template Validation: Automatically checks if price and moving averages (50, 150, 200 SMA) meet the "Trend Template" criteria.
Adaptive Moving Averages: Includes 10, 20, 50, 150, and 200 SMAs. You can "lock" these to the Daily timeframe so they remain consistent even when you switch to lower timeframes.
Smart Volume Analysis:
Highlights bars based on volume intensity and price close (Top vs. Bottom Quartile).
Calculates a Weekly Volume Ratio to identify institutional accumulation or distribution.
Volatility Profiling: Categorizes stocks into four risk buckets (Ultra-Steady to High Volatility) based on ATR-to-SMA ratios.
Automated Stop Loss (SL) & Swing Markers:
Displays a dynamic 2x ATR Stop Loss line.
Identifies Swing Highs (SH) and Swing Lows (SL) with vertical markers.
Calculates suggested stop levels based on major moving averages at the most recent pivot low.
### The Dashboard ###
The top-right (default) table provides a real-time health check of the asset:
Metric: Description
MA Statistics: Current values for 10, 20, 50, 150, and 200 SMAs.
MA Alignment: A green arrow appears if Price > 50 > 150 > 200 SMA.
52W High/Low Ratios: Validates if the price is within 25% of its 52-week high and at least 30% above its 52-week low.
SMA Trends: Status (Up/Down/Flat) for the 50, 150, and 200 SMAs based on a 30-day slope.
ADR & ATR: Shows Average Daily Range and Average True Range over 20 periods.
### Visual Guide ###
Bar Coloring Logic
When Highlight Volume is enabled, bars change color during high-volume events:
Green : Price closed in the top 25% of its daily range (Strong Demand).
Yellow : Price closed in the bottom 25% or lower than the previous close (Distribution).
Black : High volume but price closed in the middle of the range (Indecision).
Swing Markers
The script automatically identifies pivot points:
Yellow "SL" Label: Recent Swing Low with a vertical dotted line and projected SMA support levels.
Blue "SH" Label: Recent Swing High.
### Inputs & Settings ###
Lock SMAs to Daily: Keep this checked to ensure your 200-day SMA doesn't turn into a 200-period SMA when switching to an hourly chart.
ATR Multiplier: Adjust the volatility stop loss (default is 2.0).
Pivot Strength: Change the left/right bar count required to confirm a Swing High or Low.
Table Position: Move the dashboard to any corner of your chart to avoid overlapping with other indicators.
### Usage Tips ###
Stage 2 Selection: Look for the "MA Alignment" arrow to be green. This indicates the stock is in a confirmed uptrend.
Volume Clues: Watch for green-highlighted bars on high volume—this often signals the start of a "Power Play" or institutional entry.
Weekly View: On the Weekly timeframe, the script plots a volume ratio label. A ratio > 2.0 with a green triangle indicates massive accumulation.
Disclaimer: This script is for educational and informational purposes only. Trading involves significant risk. Always perform your own due diligence.
4-Hour Trend Strategy4-Hour Trend Strategy
This Pine Script® (v6) indicator is designed for high-conviction trend following on the 4-hour (240m) timeframe. It utilizes a multi-step confirmation process—Trend, Trigger, and Entry—to filter out market noise and identify high-probability reversal or continuation setups.
📈 Strategy Overview
The strategy follows a disciplined 3-step state machine logic to ensure trades are only taken when momentum and price action align.
1. The Trend Candle (State 1)
The process begins when the 4-hour price crosses the 50-period Simple Moving Average (SMA 50).
Long Bias: Price closes above SMA 50.
Short Bias: Price closes below SMA 50.
Visual: The candle bar color turns White.
2. The Trigger Candle (State 2)
Once a trend is identified, we wait for moving average momentum to confirm.
Long Trigger: SMA 5 crosses over SMA 50.
Short Trigger: SMA 5 crosses under SMA 50.
Visual: The candle bar turns Lime (Long) or Yellow (Short).
3. The Entry Candle (Execution)
We do not "chase" the trigger. Instead, we wait for a minor mean reversion (pullback) to the SMA 5.
Buy Entry: Price retraces down to touch or go below SMA 5 while in a Long Setup.
Sell Entry: Price retraces up to touch or go above SMA 5 while in a Short Setup.
Visual: A Green Triangle (Buy) or Red Triangle (Sell) appears.
🛠 Features
Multi-Timeframe Analysis: Automatically fetches SMA 200 from the Daily timeframe and SMA 50/5/10 from the 4-Hour timeframe, regardless of your current chart view.
Dynamic Stop Loss Levels: Upon entry, the script calculates and draws three distinct risk management levels:
1x ATR: Tight stop for aggressive momentum.
2x ATR: Standard stop for trend volatility.
50 SMA: Structural stop based on the primary trend line.
Clean UI: A "Show Only Latest" toggle ensures your chart isn't cluttered with old labels, keeping your focus on the current live setup.
Visual Backgrounds: The chart background is shaded Green (Bullish territory) or Red (Bearish territory) based on price relation to the SMA 50.
⚙️ Inputs & Configuration
Input | Default | Description
ATR Period | 20 | Period used to calculate volatility for Stop Loss levels.
Show Only Latest | True | When enabled, only the most recent signal's lines and labels are visible.
🚀 How to Use
Installation: Copy the code into the Pine Editor on TradingView and click "Add to Chart."
Identify the Bias: Watch for the background color and the White "Trend" candle.
Wait for Trigger: Look for the Lime/Yellow bars indicating SMA crossover.
Execute on Signal: Enter when the Triangle signal appears. Use the projected Blue Entry Line and Black SL Lines to set your orders.
Note: This is an Indicator , not a Strategy (backtesting) script. It provides visual signals and labels for manual execution or alert integration.
Disclaimer: This script is for educational and informational purposes only. Trading involves significant risk. Always perform your own due diligence.
Multi-DMA % Relationships (v6)This script helps determine the momentum of stock and early rise detection. Uses the %gap between multiple moving averages like 20,50,200 . These are user configurable.
current close Vs 20 gap %, 20 vs 50 DMA gap % and 50 vs 200 DMA gap %. The higher the faster DMA % the higher the momentum. Use lower % for close Vs 20 DMA gap to pick early trends of uptrend.
This script also has a Vol. spike detection (user configurable) to add confidence to the DMA spike before taking initial positions.
GCM Quantum Strike: VMDPB & MarubozuTitle Field: GCM Quantum Strike: VMDPB & Marubozu
Description:
GCM Quantum Strike is a comprehensive technical analysis suite designed to visualize Momentum (Marubozu), Trend (Ribbons/DEMA), and Key Levels (PDHL/VWAP) on a single overlay.
The core innovation of this script is the "Phantom Mode" Marubozu Engine, a custom coding technique designed to solve the issue of color transparency mixing on overlay charts.
Originality & Concept
Standard scripts often struggle when highlighting specific candle patterns; drawing a highlight over an existing candle results in muddy, mixed colors due to transparency blending.
GCM Quantum Strike solves this using a unique logic flow:
1. Detection: It scans price action for Marubozu candles based on strict ATR (Volatility) and Percentage (Body/Wick) requirements.
2. Phantom Mode: When a signal is found, the script programmatically turns the original chart bar 100% invisible (color.rgb(0,0,0,100)).
3. Reconstruction: It instantly draws a new, Solid (100% Opacity) custom candle in that exact space.
This results in crisp, "Quantum" styled signals that pop off the screen without blending with the background or previous themes.
How it Works & Key Features
1. The Marubozu Engine (GM / RM)
• Logic: A candle is identified as a Marubozu if:
o Size: The range exceeds a user-defined multiple of the ATR (14).
o Body: Occupies >80% (default) of the total range.
o Wicks: Occupy <10% (default) of the total range.
• Visuals:
o GM (Green Marubozu): Signals strong Bullish influx.
o RM (Red Marubozu): Signals strong Bearish influx.
o Both are rendered in solid Neon Green/Red.
2. Trend Ribbons & Averages
• EMA Ribbons: A visual ribbon formed by EMA 5, 9, 15, and SMA 20. The color intensity changes based on the slope alignment, helping identify the strength of the immediate trend.
• VWMA 20 (Volume Weighted): Plots in Light Blue (Rising) or Orange (Falling). This helps confirm if price moves are backed by volume.
• DEMA 100 (Step-Line): A Double EMA plotted as a step-line to act as a clear, non-noisy baseline for the long-term trend.
3. Institutional Levels
• PDH / PDL: The Previous Day's High and Low are fetched from daily data (non-repainting) and plotted as "Cross" markers. These often act as strong intraday magnets or reversal points.
• VWAP: The classic Session Volume Weighted Average Price (Yellow).
• Bollinger Bands: Standard 2.0 deviation bands to visualize volatility expansion and contraction.
How to Use
This script is designed for "Confluence Trading." Do not rely on one signal alone; look for agreement among the indicators.
1. The Setup: Wait for the EMA Ribbons and VWMA 20 to align in color (e.g., Green/Blue for Buy).
2. The Trigger: Look for a GM (Green Marubozu) label. This indicates a high-momentum breakout or trend continuation candle.
3. The Validation: Ensure the GM candle closes outside the EMA ribbons or above the VWAP.
4. The Targets: Use the PDH (Red Crosses) or Upper Bollinger Band as logical take-profit zones.
Settings
• Marubozu Settings: Fully adjustable. You can change the Min Body %, Max Shadow %, and ATR Multiplier to filter out smaller candles during choppy markets.
• Moving Averages: Adjust lengths for VWMA, SMA, and DEMA.
• Toggles: Every component (PDHL, BB, Ribbons) can be toggled on/off to keep your chart clean.
Livermore AI EMA S/R Channel with VWAP Malama's Livermore AI EMA S/R Channel is a comprehensive trend-following and reversal detection system inspired by Jesse Livermore's legendary trading principles, modernized with advanced algorithmic filtering. This enhanced version integrates multiple layers of confirmation to filter noise and identify high-probability setups.
Justification for this Combination (The Mashup): Trading purely on price action or basic moving averages often leads to whipsaws. This script solves that problem by enforcing Confluence. A signal is only generated when Trend (EMA/VWAP), Momentum (RSI/MACD), Volume (Spikes), and Market Structure (Pivots/Support & Resistance) all align in a single bar. Merging these distinct analytical methods into one "Signal Engine" prevents the trader from needing to check five different indicators manually.
Underlying Calculations & Logic:
1. Dynamic Support & Resistance Engine:
The script calculates a cluster of significant EMAs (9, 24, 50, 200) and VWAP in real-time.
It actively monitors the price's distance from these levels. If price approaches within a specific ATR-based buffer zone, the script registers a potential "Bounce" or "Breakout" event.
2. Smart Pivot Detection:
It uses a customizable lookback period to identify significant swing highs and lows.
These pivots act as the primary triggers. A "BUY" or "SELL" signal is only authorized if price breaks a confirmed pivot level while the other filters (Trend, Volume, ADX) are green.
3. Multi-Layered Filtering (The AI Logic):
Trend: Checks alignment with the 9/24 EMA Channel. (9 > 24 = Bullish).
Momentum: An optional "Enhanced Signal Processing" module calculates a weighted score based on RSI position and MACD histogram slope to confirm trend strength.
Volume: Detects relative volume spikes (Volume > Average * Multiplier) to ensure institutional participation.
ADX: Filters out choppy, low-momentum markets (ADX < 20).
4. Live Intelligence Dashboards:
Debug Table: Shows the real-time status of every filter (ADX strength, RSI zone, Volume spike status, and nearest S/R levels).
Alert Table: Logs recent signals and bounces directly on the chart in a history table, ensuring you never miss the context of a setup.
How to Use:
Trend Following: Look for "BUY" or "SELL" labels. These appear when price breaks a pivot in the direction of the trend with volume and momentum confirmation.
Reversal Trading: Monitor the "Bounce" alerts in the table. These indicate price is respecting a key EMA or VWAP level, offering a low-risk entry point.
Risk Management: Use the EMA Channel (Green/Red fill) as a dynamic trailing stop zone.
Disclaimer: This indicator is a tool for analysis, not a guarantee of future performance. Always use proper risk management.
Prism Band Dynamics [JOAT]Prism Band Dynamics - Bollinger-Style Bands with Force Detection
Introduction and Purpose
Prism Band Dynamics is an open-source overlay indicator that creates dynamic Bollinger-style bands with an innovative "force detection" system. The core problem this indicator solves is that standard Bollinger Bands show volatility but don't indicate directional momentum. When all three band components (upper, lower, basis) move in the same direction, it indicates strong directional force that standard bands don't highlight.
This indicator addresses that by detecting when all band components align directionally, providing a clear signal of market force.
Why Force Detection Matters
Standard Bollinger Bands expand and contract based on volatility, but they don't tell you about directional momentum. Force detection adds this dimension:
1. Bullish Force - Upper band, lower band, AND basis all moving up together. This indicates strong upward momentum where even the lower support level is rising.
2. Bearish Force - Upper band, lower band, AND basis all moving down together. This indicates strong downward momentum where even the upper resistance level is falling.
3. Neutral - Mixed movement indicates consolidation or uncertainty.
How Force Detection Works
bool upperUp = upper > upper
bool lowerUp = lower > lower
bool basisUp = basis > basis
int forceFull = if upperUp and lowerUp and basisUp
1 // Bullish force
else if upperDn and lowerDn and basisDn
-1 // Bearish force
else
0 // Neutral
Additional Features
Squeeze Detection - Identifies when band width contracts below threshold, often preceding large moves
Gradient Fills - Color intensity reflects force strength
Direction Change Arrows - Visual markers when force direction shifts
Dashboard Information
Force - Current force status (BULLISH/BEARISH/NEUTRAL)
Position - Price location within bands (Upper/Mid/Lower Zone)
Band Width - Current width percentage with expansion/contraction label
Volatility - Squeeze status (SQUEEZE/NORMAL)
Force Count - Bars since last force change
How to Use This Indicator
For Trend Following:
1. Enter long when force turns BULLISH
2. Enter short when force turns BEARISH
3. Exit or reduce when force turns NEUTRAL
For Squeeze Breakouts:
1. Watch for SQUEEZE status in dashboard
2. Prepare for breakout in either direction
3. Enter when force confirms direction after squeeze
For Mean Reversion:
1. Only trade mean-reversion when force is NEUTRAL
2. Avoid fading moves when force is active
3. Use band touches as entry points during neutral force
Input Parameters
Length (20) - Period for basis and standard deviation
Multiplier (2.0) - Standard deviation multiplier for bands
MA Type (SMA) - Basis calculation method
Squeeze Threshold (0.5) - Band width percentage for squeeze detection
Timeframe Recommendations
4H-Daily: Cleanest force signals
1H: Good balance of signals and reliability
15m: More signals but more noise
Limitations
Force detection can lag during rapid reversals
Squeeze breakouts can fail (false breakouts)
Works best in markets with clear trending/ranging phases
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes.
This indicator does not constitute financial advice. Force detection does not guarantee trend continuation. Always use proper risk management.
- Made with passion by officialjackofalltrades
WaveTrend MACD Fusion Oscillator [MatrixQuantLabs]WaveTrend MACD Fusion Oscillator is a composite momentum oscillator that combines WaveTrend trend structure with MACD momentum analysis in a unified panel.
It is designed to help traders better align trend strength, wave timing, and signal confirmation through normalization, filtering, and divergence analysis.
Core Concept
Instead of using the original WaveTrend histogram structure, this indicator adopts the standard MACD histogram as its momentum foundation.
This design choice allows for clearer and more reliable differentiation of trend strength, while maintaining consistency across different symbols and timeframes through normalization.
WaveTrend is then applied as a wave timing and signal layer, making the overall structure easier to interpret and more robust in varying market conditions.
Key Features
Normalized MACD for Cross-Market Consistency
• The indicator uses standard MACD parameters (12/26/9) and applies normalization to scale values into a consistent range.
• This helps avoid chart distortion across different symbols and timeframes.
• An optional “Hide Weekly+” mode is provided to prevent higher-timeframe MACD values from compressing the panel scale.
MACD Histogram with Optional MACD Lines
• The MACD histogram visually represents bullish and bearish momentum, with dynamic coloring to reflect momentum expansion or contraction.
• MACD and Signal lines can be optionally displayed when deeper analysis is required.
Divergence Detection (Regular & Hidden)
Built-in divergence detection supports both MACD lines and histogram-based divergences, with selectable modes:
• Regular Divergence for potential reversals
• Hidden Divergence for trend continuation
Pivot-based confirmation and range filters help reduce noise and false signals.
WaveTrend Oscillator with Cross Strength Classification
• The WaveTrend module consists of a main trend line and a signal line, highlighting wave structure and momentum shifts.
• Golden crosses and death crosses are classified into multiple strength levels, allowing users to distinguish minor signals from more significant ones.
• The closer a counter-directional cross occurs to the overbought or oversold zones, the stronger the potential reversal signal.
• Optional Laguerre smoothing can be enabled to reduce noise and improve signal stability.
MACD-Based Signal Filtering
WaveTrend cross signals can be filtered using MACD conditions:
• Histogram Filter: Bullish crosses only when the MACD histogram is bullish, bearish crosses only when bearish
• Zero-Line Filter: Bullish crosses only above the MACD zero line, bearish crosses only below
These filters help align wave signals with the broader momentum context and reduce counter-trend noise.
Parameter Notes
Normalization Period
• Adjust this value if the indicator appears compressed or if different symbols show inconsistent scaling.
Pivot Right
• Higher values provide stronger confirmation with more delay; lower values are more sensitive and respond faster.
Laguerre Smoothing (Gamma)
• Lower values offer stronger smoothing and stability; higher values provide faster but noisier responses.
Usage Notes
• Use WaveTrend crosses to identify wave timing and momentum shifts.
• Use MACD (histogram and zero line) to assess trend direction and momentum strength.
• Divergence signals should be treated as early warnings, not standalone trade triggers.
• Best results are achieved when combined with trend analysis, price structure, or higher-timeframe context.
Disclaimer
This indicator is intended for educational and analytical purposes only and does not constitute financial advice. Always apply proper risk management and confirm signals with additional analysis.
KC EMA Ribbon with 200 EMAEMA Ribbon 21–50 with 200 EMA Trend Filter
This indicator is designed to identify high-probability trend continuation opportunities using a structured EMA ribbon and a higher-timeframe trend filter.
It combines a 7-EMA ribbon (21 to 50) to visualize momentum and market structure, along with a 200 EMA to define the dominant trend.
Signals appear only when price action, ribbon direction, and overall trend are aligned — helping traders avoid choppy and low-quality setups.
Indicator Components
EMA Ribbon: 21, 25, 30, 35, 40, 45, 50
Trend Filter: 200 EMA (yellow)
No background shading for a clean, price-focused chart
How It Works
The EMA ribbon changes color based on bullish or bearish structure.
A bullish environment occurs when the ribbon is stacked upward and price is above the 200 EMA.
A bearish environment occurs when the ribbon is stacked downward and price is below the 200 EMA.
LONG and SHORT signals are generated only when the market is trending, reducing signal noise.
Trading Logic
LONG setups:
Price above 200 EMA, ribbon bullish, and a pullback followed by bullish continuation.
SHORT setups:
Price below 200 EMA, ribbon bearish, and a pullback followed by bearish continuation.
This indicator is not designed for ranging or sideways markets. It performs best during clear directional trends.
Best Use Cases
Timeframes: 1H, 2H, 4H
Markets: Crypto, Forex, Indices
Style: Trend continuation & swing trading
Important Notes
Avoid trading when the EMA ribbon is compressed or flat.
Best results come from combining this indicator with market structure, key levels, and disciplined risk management.
This tool is meant to support decision-making, not replace a trading plan.
⚠️ This indicator does not predict the market. It helps traders stay aligned with the prevailing trend and manage entries more objectively.
GEOFF LONG/SHORT ENTRY + STOP + TP / FINALIZED + ALERT / EMA
This professional-grade scalper is engineered specifically for the Micro E-mini S&P 500 (MES) and focuses exclusively on high-probability "A+" setups. By stripping away secondary noise, the indicator identifies surgical entries where momentum, trend, and institutional value converge.
### THE "PERFECT SETUP" LOGIC (4-LAYER FILTER)
To ensure the highest strike rate, a trade is only triggered when all four of the following conditions align:
1. TREND: 8 EMA crossing the 21 EMA (Short-term momentum shift).
2. VALUE: Price must be above VWAP for Longs or below VWAP for Shorts (Institutional bias).
3. MOMENTUM: RSI must be > 55 for Longs or < 45 for Shorts (Confirming the "Flush").
4. VOLATILITY: The entry candle must close outside the EMA spread to confirm strength.
### KEY FEATURES
* IRON-CLAD ANCHORING: Uses Pine Script v6 'chart.point' math to mathematically weld boxes and labels to the price bars. Drawings will NOT drift or lag when zooming or panning.
* DYNAMIC RISK CALCULATOR: Automatically calculates Take Profit and Stop Loss levels based on your input points. It displays the real-time dollar gain/loss ($5 per point for MES) directly on the chart.
* SURGICAL VISUALS: Features a 3-label system (Entry Price, Target Price, and Stop Price) positioned externally to keep the candlestick price action clear and visible.
* COLOR-SYNC LOGIC: Intuitively designed so that the Profit Target is ALWAYS Lime/Green and the Risk/Stop is ALWAYS Red, regardless of whether you are in a Long or Short position.
* INTEGRATED ALERTS: Includes built-in alert conditions for "Perfect Long" and "Perfect Short" to sync with phone or browser notifications.
### BEST USED ON:
Optimized for the 1m, 2m, and 5m timeframes for MES Futures.
Alligator Trend ZoneThis indicator is based on Bill Williams’ Alligator it Simplifies trend detection and Visualizes trend strength.
• Green zone when price is above all three Alligator lines (strong bullish trend).
• Red zone when price is below all three lines (strong bearish trend).
• Moving averages (Jaw, Teeth, Lips) are included but hidden by default for a clutter-free view.
• Enable them anytime for deeper analysis.
• Background color shifts with trend bias.
• Bullish/Bearish arrows for quick signal recognition.
• Candle coloring for instant trend visualization.
• Built-in alerts for bullish and bearish setups
Disclaimer:
This script is for educational purposes only. Trading involves risk, and past performance does not guarantee future results. Please test thoroughly and use at your own discretion. You are solely responsible for your trading decisions.
W/D/4HR OTE Aligner (V6) - Alerts This indicator is a multi-timeframe (MTF) alignment and Optimal Trade Entry (OTE) alert tool designed for discretionary manual trading on the 15-minute timeframe.
Here is a description of its core functionality:
W/D/4HR OTE Aligner (V6) - Alerts
This custom TradingView indicator assists manual traders by identifying high-probability trading setups that meet specific structural and momentum criteria across multiple timeframes. It does not place trades automatically but generates a "Trade Signal" used for setting up reliable alerts.
Key Features:
Multi-Timeframe Bias Confirmation: The indicator uses a 50-period Exponential Moving Average (EMA) to confirm that the Weekly, Daily, and 4-Hour timeframes are all aligned in the same direction (all above for bullish, all below for bearish). This provides a strong directional bias.
OTE Zone Identification: It dynamically calculates recent swing highs and lows on the 4-hour chart (using reliable pivot detection) and highlights the Optimal Trade Entry (OTE) zone, typically centered around the 0.618 Fibonacci Retracement level.
15-Minute Entry Signal: Once price enters the OTE zone within the aligned trend direction, the indicator looks for a confirmation entry signal on the 15-minute chart, specifically a 9-period EMA crossing the 20-period EMA.
Manual Alert System: A transparent "Trade Signal" plot provides the trigger source for a manual TradingView alert, notifying the user exactly when all criteria are met for a potential long or short trade entry.
This indicator is a tool for finding precise entry points within dominant, confirmed trends.
for clarity i built this using Google AI to help with being away from the charts it reflects how i wish to progress on my journey so any tips or feed back with me much appreciated
Kalman Exponential SuperTrendThe Kalman Exponential SuperTrend is a new, smoother & superior version of the famous "SuperTrend". Using Kalman smoothing, a concept from the EMA (Exponential Moving Average), this script leverages the best out of each and combines it into a single indicator.
How does it work?
First, we need to calculate the Kalman smoothed source. This is a kind of complex calculation, so you need to study it if you want to know how it works precisely. It smooths the source of the SuperTrend, which helps us smooth the SuperTrend.
Then, we calculate "a" where:
n = user defined ATR length
a = 2/(n+1)
Now we calculate the ATR over "n" period. Classical calculation, nothing changed here.
Now we calculate the SuperTrend using the Kalman smoothed source & ATR where:
kalman = kalman smoothed source
ATR = Average True Range
m = Factor chosen by user.
Upper Band = kalman + ATR * m
Lower Band = kalman - ATR * m
Now we just smooth it a bit further using the "a" and a concept from the EMA.
u1 = Upper Band a bar ago
l1 = Lower Band a bar ago
u = Upper Band
l = Lower Band
Upper = u1 * (1-a) + u * a
Lower = l1 * (1-a) + u * a
When the classical (not Kalman) source crosses above the Upper, it indicates an uptrend. When it crosses below the Lower, it indicates a downtrend.
Methodology & Concepts
When I took a look at the classical SuperTrend => It was just far too slow, and if I made it faster it was noisy as hell. So I decided I would try to make up for it.
I tried the gaussian, bilateral filter, but then I tried kalman and that worked the best, so I added it. Now it was still too noisy and unconsistent, so I revisited my knowledge of concepts and picked the one from the EMA, and it kinda solved it.
In the core of the indicator, all it does is combine them in a really simple way, but if you go more deeply you see how it fits the puzzlé really well.
It is not about trying out random things´=> but about seeking what it is missing and trying to lessen its bad side.
That is the entire point of this indicator => Offer a unique approach to the SuperTrend type, that lessen the bad sides of it.
I also added different plotting types, this is so everyone can find their favorite
Enjoy Gs!
Thanks @BackQuant for making a open source Kalman code <3
Bi-Fi StrategyVersion - Alpha
Only use this indicator on FX:US30 on NY open
Only take Breakout entry's when EMA trend matches the label color!
(More updates coming soon)
