TEEREX COUNTDOWN BY N' TEEREX HOONJONGPANG Features:
Price Flip Detection – identifies initial buy/sell setups based on close price comparisons to previous bars.
Setup Phase (1–9) – counts consecutive bars fulfilling Teerex number conditions; plots numbers on each candle.
Cd Phase (1–13) – continues counting after Setup 9; highlights potential reversal points.
Signals – marks Setup 9 and Countdown 13 with clear labels and arrows (“LONG” / “SELL”).
TDST Lines – draws dynamic support (Buy TDST) or resistance (Sell TDST) lines based on Setup 9 highs/lows. These lines help identify potential breakout or bounce zones.
Customizable Display – options to show/hide numbers, signals, and TDST lines; color-coded for clarity.
Usage:
Monitor Setup 9 and Countdown 13 labels for strong buy/sell signals.
Use TDST lines as reference for support/resistance, target levels, or confirmation of trend continuation.
Visuals:
Numbers 1–9/1–13 appear on the chart for precise counting.
Arrows and labels indicate Setup 9 completion and Cd 13 completion.
TDST lines extend to the right, updating with each new Setup 9.
المؤشرات والاستراتيجيات
FBTBBT (Filtered Black Two Bar Break Through)📘 FBTBBT (Filtered Black Two Bar Break Through)
Overview
FBTBBT is a filtered breakout indicator based on the classical Two Bar Break Through (TBBT) concept.
It generates Buy and Sell signals when price breaks above or below the previous bar’s high/low, but only displays the **first signal in a run** to avoid noise and duplicates.
- Buy Signal → Break above previous high
- Sell Signal → Break below previous low
- Filtered → Only the first signal in a consecutive streak is shown
---
Key Features
1. Filtered Signals
• Avoids repeated identical signals.
• Example: 3 consecutive bars breaking the previous low → only the first bar shows a Sell signal.
2. Confirmation Options
• Real-Time Mode: signals appear intrabar as soon as the breakout happens.
• Close Confirmation: signals appear only after bar close beyond previous high/low (reduces repainting).
3. Visual Aids
• Green “Buy” labels below breakout bars.
• Red “Sell” labels above breakout bars.
• Optional lines for previous bar’s high/low levels.
4. Alerts
• Alerts trigger only on the first filtered signal in each run.
• Messages specify breakout above (Buy) or below (Sell).
---
How to Use
• Add FBTBBT to your TradingView chart.
• Choose Real-Time or Close-Confirmed signals depending on your style.
• Focus on the **first breakout signal**; ignore duplicates until the opposite side appears.
• Combine with trend filters, volume, or higher timeframe context for stronger accuracy.
---
👉 In short:
**FBTBBT = Clean, filtered breakout signals with no noise.**
Perfect for traders who want **precise first-bar breakouts** while avoiding repeated alerts.
Vegas Touch EMA12 切換 EMA-12 Based Switching Rules (No RSI)
For Long trades:
Tunnel Mode → If EMA-12 is between EMA-144 and EMA-169 → use the Tunnel (144/169) lines as the touch reference.
Base Mode → If EMA-12 is below EMA-169 but still above EMA-676 → use the Base (576/676) lines as the touch reference.
No Long → If EMA-12 is below EMA-676, no long trade is allowed.
For Short trades (mirror logic):
Tunnel Mode → If EMA-12 is between EMA-144 and EMA-169 → use the Tunnel (144/169) lines as the touch reference.
Base Mode → If EMA-12 is above EMA-169 but still below EMA-676 → use the Base (576/676) lines as the touch reference.
No Short → If EMA-12 is above EMA-676, no short trade is allowed.
Vegas ema 過濾 Vegas Channel with EMA-Filter — Trading Rules
Components
Tunnel: EMA 144 & 169 (upper = max, lower = min).
Base: EMA 576 & 676 (upper = max, lower = min).
Fast filter: EMA12.
Touch threshold: ATR-based or % of the reference line.
Long touch = low ≤ line + thr; Short touch = high ≥ line − thr.
Trend gate
LongTrendOK: EMA144 > EMA576 and EMA169 > EMA676 and close > BaseUpper.
ShortTrendOK: EMA144 < EMA576 and EMA169 < EMA676 and close < BaseLower.
Price-action pattern (either one)
Pin40: bullish pin = close>open & lower wick ≥ 40% of range; bearish pin = close 169 → use Base.
Else → use Tunnel.
EMA12 hard locks (coarse filter)
Lock longs if EMA12 < 676 (no long signals at all).
Lock shorts if EMA12 > 676 (no short signals at all).
(Optional) Tunnel lock/unlock (fine filter)
Lock longs when EMA12 drops below TunnelLower; unlock when
A) EMA12 crosses back above 144/169/TunnelUpper, or
B) a bullish Pin/Eng appears at BaseUpper and EMA12 is back ≥ TunnelLower.
Lock shorts when EMA12 breaks above TunnelUpper; unlock when
A) EMA12 crosses back below 144/169/TunnelLower, or
B) a bearish Pin/Eng appears at BaseLower and EMA12 is ≤ TunnelUpper.
Final signal
LONG fires when: Close-bar confirmed ∧ Cooldown passed ∧ LongTrendOK ∧ ActiveBand lower touch ∧ Pin40 or Eng60 ∧ not hard-locked ∧ (not tunnel-locked if enabled).
SHORT symmetrical with upper touch.
Quality-of-life
Close-bar confirmation to avoid repaint.
Cooldown (e.g., 10 bars) to prevent signal clusters.
Alerts include a compact lock status string (LckL/LckS/HardL/HardS).
Optional “BLOCK:” labels show why a bar didn’t trigger (noTouch, EMA12<676/>676, TunnelLock, cooldown, notClose).
Suggested defaults
ATR(14), ATR multiplier 0.35 (or 0.20% if using Percent mode).
autoSwitchByEMA12_* = ON, hardLockBelow676/Above676 = ON, useTunnelLock* = OFF.
useCloseBar = ON, signalCooldown = 10.
Design intent
Tunnel (144/169) captures the working trend; Base (576/676) defines the structural bias.
EMA12 drives regime selection (Tunnel vs Base) and hard locks to keep signals sparse and aligned with momentum.
SMA200 - 400 Cross AlertYou can set the alarm by clicking the three dots on the top left of the main chart.
Alarms for Golden Cross and Dead Cross are available.
christophrobert MMA'sThe market moves in waves of momentum and trends, often leaving traders guessing where the true peaks and bottoms lie. The Multiple Moving Average Indicator is designed to cut through that noise. By layering multiple moving averages into a ribbon indicator, this tool makes it easy to spot shifts in momentum, highlight potential market tops and bottoms, and visualize the strength of a trend at a glance.
Whether you’re looking for the best times to buy, sell, or simply confirm the strength of a move, this indicator provides a clear framework to guide your decisions.
Open = High / Open = Low MarkerMarks Open = High and Open = Low Candles on whichever timeframe the user is using.
Stop ATR Indicator [AlphaGroup.Live]Tralling Stop tool! Perferct for Prop Firm Traders
The Stop ATR is a volatility-based trailing stop that adapts dynamically to market conditions.
It uses the Average True Range (ATR) to plot a continuous “stair-step” line:
• In uptrend , the stop appears below price as a green line, rising with volatility.
• In downtrend , the stop appears above price as a red line, falling with volatility.
Unlike fixed stops, the Stop ATR never moves backward . It only trails in the direction of the trend, locking in profits while leaving room for price to move.
Key features:
• ATR-based trailing stop that adapts to volatility.
• Clean “one line only” design — no overlap of signals.
• Adjustable ATR period and multiplier for flexibility.
• Color-coded visualization for quick trend recognition.
How traders use it:
• Manage trades with volatility-adjusted stop placement.
• Identify trend reversals when price closes across the stop.
• Combine with other entry signals for a complete strategy.
About us:
AlphaGroup.Live develops battle-tested trading systems and tools for real traders — indicators, bots, dashboards, and strategy manuals.
Visit alphagroup.live to get our free eBook: The Ultimate 100 Trading Strategies .
HiLo Stop Indicator [AlphaGroup.Live]Don't give your money back!
The HiLo Stop is a classic trend-following tool designed to keep trading simple and disciplined.
It plots a single continuous “stair-step” line that switches sides when the trend changes:
• In uptrend , the line appears below price as a green stop.
• In downtrend , the line appears above price as a red stop.
This indicator is commonly used as:
• A trailing stop to protect open profits.
• A trend filter to confirm buy/sell direction.
• A visual guide to avoid trading against the trend.
Key features:
• Clean “one line only” design — never plots both sides at once.
• Adjustable HiLo period for sensitivity control.
• Color-coded trend visualization for quick decision making.
How traders apply it:
• Take trades in the direction of the HiLo line.
• Place stop-loss orders at or near the line.
• Close or reverse positions when price closes across the stop.
About us:
AlphaGroup.Live develops battle-tested trading systems and tools for real traders — indicators, bots, dashboards, and strategy manuals.
Visit alphagroup.live to get our free eBook: The Ultimate 100 Trading Strategies .
Prev 1 & 2 Day Close (Intraday)it give 1 day ago close and give good sentimate that if breaks level then big fal in intraday
VPOC Harmonics - Liquidity-Weighted Price / Time RatiosVPOC Harmonics - Liquidity-Weighted Price / Time Ratios
Summary
This indicator transforms a swing’s price range, duration, and liquidity profile into a structured set of price-per-bar ratios. By anchoring two points and manually entering the swing’s VPOC (highest-volume price), it generates candidate compression values that unify price, time, and liquidity structure. These values can be applied to chart scaling, harmonic testing, and liquidity-aware market geometry.
________________________________________
Overview
Most swing analysis tools only consider price (ΔP) and time (N bars). This script goes further by incorporating the VPOC (Point of Control) — the price with the highest traded volume — directly into swing geometry.
• Anchors define the swing’s Low (L), High (H), and bar count (N).
• The user manually enters the VPOC (highest-volume price).
• The indicator then computes a suite of ratios that integrate range, duration, and liquidity placement.
The output is a table of liquidity-weighted price-per-bar candidates, designed for compression testing and harmonic analysis across swings and instruments.
________________________________________
How to Use
1. Select a Swing
- Place Anchor A and Anchor B to define the swing’s Low, High, and bar count.
2. Find the VPOC
- Apply TradingView’s Fixed Range Volume Profile tool over the same swing.
- Identify the Point of Control (POC) — the price level with the highest traded volume.
3. Enter the VPOC
- Manually input the POC into the indicator settings.
4. Review Outputs
- The table will display candidate ratios expressed mainly as price-per-bar values.
5. Apply in Practice
- Use the ratios as chart compression inputs or as benchmarks for testing harmonic alignments across swings.
________________________________________
Outputs
Swing & Inputs
• Bars (N): total bar count of the swing.
• Low (L): swing low price.
• High (H): swing high price.
• ΔP = H − L: price range.
• Mid = (L + H) ÷ 2: midpoint price.
• VPOC (V): user-entered highest-volume price.
• Base slope s0 = ΔP ÷ N: average change per bar.
• π-adjusted slope sπ = (π × ΔP) ÷ (2 × N): slope adjusted for half-cycle arc geometry.
________________________________________
VPOC Harmony Ratios (L, H, V, N)
• λ = (V − L) ÷ ΔP: normalized VPOC position within the range.
• R = (V − L) ÷ (H − V): symmetry ratio comparing lower vs. upper segment.
• s1 = (V − L) ÷ N: slope from Low → VPOC.
• s2 = (H − V) ÷ N: slope from VPOC → High.
________________________________________
Blended Means (s1, s2)
These combine the two segment slopes in different ways:
• HM(s1,s2) = 2 ÷ (1/s1 + 1/s2): Harmonic mean, emphasizes the smaller slope.
• GM(s1,s2) = sqrt(s1 × s2): Geometric mean, balances both slopes proportionally.
• RMS(s1,s2) = sqrt((s1² + s2²) ÷ 2): Root-mean-square, emphasizes the larger slope.
• L2 = sqrt(s1² + s2²): Euclidean norm, the vector length of both slopes combined.
________________________________________
Slope Blends
• Quadratic weighting: s_quad = s0 × ((V−L)² + (H−V)²) ÷ (ΔP²)
• Tilted slope: s_tilt = s0 × (0.5 + λ)
• Entropy-scaled slope: s_ent = s0 × H2(λ), with H2(λ) = −
________________________________________
Curvature & Liquidity Extensions
• π-arc × λ: s_arc = sπ × λ
• Liquidity-π: s_piV = sπ × (V ÷ Mid)
________________________________________
Scale-Normalized Families
With k = sqrt(H ÷ L):
• k (scale factor) = sqrt(H ÷ L)
• s_comp = s0 ÷ k: compressed slope candidate
• s_exp = s0 × k: expanded slope candidate
• Exponentiated blends:
- s_kλ = s0 × k^(2λ−1)
- s_φλ = s0 × φ^(2λ−1), with φ = golden ratio ≈ 1.618
- s_√2λ = s0 × (√2)^(2λ−1)
________________________________________
Practical Application
All formulas generate liquidity-weighted price-per-bar ratios that integrate range, time, and VPOC placement.
These values are designed for:
• Chart compression settings
• Testing harmonic alignments across swings
• Liquidity-aware scaling experiments
________________________________________
Inefficient Candle TrackerThe Inefficient Candle Tracker indicator highlights large, inefficient price moves and plots their midpoints as Squared Up Points.
Detects large candles using Percentile or ATR multiple methods
Draws dynamic dashed lines at candle midpoints until price “squares them up”
Built-in alerts for new SUP creation and when levels are touched
Great for spotting unfinished business in price action, confluence with support/resistance, and potential return levels.
Alt Season vs USDT Flow DashboardWhat the script tells you (the signals)
It builds four “alt vs stables” lenses and colors the background when they agree.
ALT ex-ETH / STABLES (TOTAL3 / (USDT+USDC+DAI))
Think: “How much alt cap per $1 of dry-powder stables?”
Bullish when price is above its 200-day SMA and rising → risk appetite expanding toward smaller alts.
ALT Share of Risk-On ((TOTAL − STABLES − BTC − ETH) / (TOTAL − STABLES))
Of the non-stable crypto pie, how much is flowing to ex-BTC/ETH alts?
Uptrend = broadening alt participation (late-early to mid alt-season behavior).
Dominance Spread ((TOTAL3 / TOTAL) − (STABLES / TOTAL))
Alts’ share minus stables’ share.
Widening spread means stables are being converted into alts (not just into BTC).
Flow Ratio ROC(TOTAL3, N) / ROC(STABLES, N) (default N=30 days)
Compares alts’ growth rate to stable supply growth.
> 1 and sustained → alts expanding faster than new “dry powder” is appearing.
The background color (“regime”)
Green (ALT-on) when all three conditions align:
ALT/Stable > its SMA
Dominance Spread > its SMA
Flow Ratio > 1
Red (ALT-off) when the opposite holds.
No color = mixed/chop.
How to read it (quick playbook)
Early alt-season tell:
BTC.D starts to slip, total market cap (TOTAL) rising.
ALT/Stable breaks above its 200-SMA and stays there.
Dominance Spread climbs (alts gaining share, stables losing share).
Flow Ratio > 1 for a few weeks.
Maturing phase: ALT Share of Risk-On rises (money broadens from ETH/L1s → mid/small caps).
Exhaustion/false start: Flow Ratio dips < 1 or ALT/Stable loses the 200-SMA while BTC.D stabilizes or rises.
Practical tips
Timeframes: Make calls on 1D. Use 1W to avoid whipsaw; use 4H only for entries once the 1D regime is green.
Smoothing: If you see noisy spikes from market-cap revisions, add a light smoother (e.g., 7D SMA on the plotted lines).
Parameters:
Try ROC length 21–45 days.
Try SMA 150–250 days (200 is a good middle).
Confluence: Keep BTC.D and ETH.D in another pane. Best alt windows: BTC.D trending down, ETH.D flat-to-up initially, then ETH.D flattens as TOTAL3 momentum spreads to mid/small caps.
Risk checks: If USDT.D/USDC.D (stable dominance) spike up while your signals are green, that’s a caution flag (capital retreating to stables).
Daily High/Low (15m) + EMA Pre-Market H/L + ORBStraightforward:
I built a swing-trading indicator with ChatGPT that plots 15-minute highs and lows, draws pre-market high/low lines, and adds a 15-minute opening-range breakout feature.
Technical:
Using ChatGPT, I developed a swing-trade indicator that calculates 15-minute highs/lows, overlays pre-market high and low levels, and includes a 15-minute Opening Range Breakout (ORB) module.
Promotional:
I created a ChatGPT-powered swing-trading indicator that maps 15-minute highs/lows, marks pre-market levels, and features a 15-minute Opening Range Breakout for clearer entries.
Previous Closes (1 & 2 Days Ago)it give closing price of last 2 days, generally of 2 days close broken then you get good move for intraday
Sniper Fade Indicator™️Sniper Fade Indicator™️
The Sniper Fade Indicator™️ is built to help traders spot potential fade opportunities — areas where price may exhaust and reverse during key sessions.
Features:
Fade Zone Mapping → visual zones highlighting likely reversal areas.
Time-Based Filters → optimized for London & New York sessions.
Clean Visual Overlays → boxes & markers for quick recognition.
Customizable Alerts → get notified when fade conditions align.
Works Across Markets → Forex, Futures, and Indices (including NAS100).
How to Use:
Use this indicator to plan trades around potential exhaustion zones. It works best when combined with daily bias context and liquidity levels. Always apply risk management and confirmation from your own strategy.
Notes:
Educational purposes only.
Not financial advice.
For best results, test in multiple markets and sessions.
Market BreadthMarket breadth is a technical analysis technique that gauges the strength or weakness of moves in a major index.
Supported index ETF: SPY, NDX, DIA, IWM, OEF, MDY, IWB, IWV.
Supported sector index ETF: XLK, XLC, XLY, XLP, XLV, XLU, XLF, XLRE, XLE, XLB, XLI.
Corner Badge: PDC,Open,VWAP & Current + Delta to PDCSimple corner badge highlighting previous day's close, opening price, vwap and current price. Calculates delta to PDC and shades green or red if above or below PDC
We know this is all on the chart, but the data is easily accesible, offers a basic heat map and shows quickly whether opening is gapped up or down vs PDC when scrolling a watchlist.
Other two will just confirm trend or reversal.
An all green box means Price gapped up from PDC, VWAP and Current Price and above PDC.
Possible continuation?
Green, Red Red, reveals gap up followed by reversal or vice versa.
Nothing fancy. It's a start.
Might edit or delete after trying for a while.
Frozen 4H VWAP – Precision AnchoredFrozen 4H VWAP – Precision Anchored Like Ice
The Frozen 4H VWAP – Precision Anchored delivers a clean, stable, and reliable view of the 4-hour Volume Weighted Average Price, designed for traders who want higher timeframe insights without intrabar noise or repainting.
🔹 Key Features:
Non-Repainting: VWAP value is “frozen” at the close of each 4H candle — no mid-bar updates or flickering.
4H Timeframe Anchoring: Seamlessly pulls 4-hour VWAP values into any timeframe you’re trading on.
Clear Trend Reference: Updates only when a new 4H candle begins, acting as a trustworthy anchor for support/resistance.
Custom Source Option: Choose from different price sources (default: HLC3) to fit your strategy.
Whether you're scalping, day trading, or swing trading, this indicator gives you a powerful edge by grounding your decisions in higher timeframe VWAP data — clear, calm, and frozen in time.
Adaptive Square Levels - for all InstrumentsDescription:
The Adaptive Square Levels indicator generates mathematically derived horizontal trendlines based on perfect squares (1², 2², 3², …) anchored to the first trading day’s open of each month.
✨ Key Features
📐 Adaptive Anchoring: Locks onto the nearest square number to the monthly open.
🔁 Dual Context: Displays both current month and previous month levels for comparison.
➕➖ Expansion: Automatically plots ±10 square levels around the anchor.
🟧 Highlighting: Multiples of 3² (9, 36, 81, …) are marked in orange for quick recognition.
⭐ Focus Line: The nearest square is bold and labeled with a ★.
🏷️ Readable Labels: Large fonts ensure values are clearly visible, even on high-value instruments.
📊 Finite Trendlines: Levels extend only within the month, not as infinite rays.
⚙️ Configurable: Adjustable max price coverage up to 250,000 (default) to suit stocks, indices, futures, or commodities.
⚙️ How It Works
At the start of a new month, the script locks the opening price of the first bar.
It finds the nearest perfect square to that open.
It then plots 10 square levels above and below the anchor.
Current month levels extend to today’s bar; previous month levels stop at month end.
The nearest square line is emphasized with a bold ★ label.
🎯 How to Use
Support & Resistance: Use square levels as natural price magnets or turning points.
Monthly Structure: Compare previous vs. current month grids for context.
Confluence Tool: Combine with price action, Fibonacci retracements, or market profile.
Focus Points: Pay special attention to the ★ bold nearest-square — it often becomes the key pivot for the month.
📚 Study Note: Why Square Numbers?
Square numbers (1, 4, 9, 16, 25, …) create a nonlinear but structured grid.
Unlike linear step levels (e.g., round numbers), square levels:
Expand naturally as prices rise.
Provide distinct mathematical anchors.
Have been observed to align with natural support/resistance zones.
This indicator makes square mathematics practical by adapting them to live market opens.
⚠️ Disclaimer
This script is for educational purposes only.
It is not financial advice.
Trading carries risk; always test and combine with proper risk management.
Prev Day Close Line + Label — White Text / Royal Blue (v6)Previous Day Close line with clear labeling.
- Gap up vs PDC
- Gap down vs PDC
Helps analyze what yesterday attempted to do helps to confirm whether the attempt was successful.