ابدأ الآن

المؤشرات والاستراتيجيات

Stoch RSI Buy/Sell Signals with AlertsThis color code helps a novice know when to buy and when to sell What Each Section Does Header: //@version=5 tells TradingView which Pine Script version to use. Indicator setup: indicator("Stoch RSI Buy/Sell Signals with Alerts", overlay=false) names your script and sets it to plot in a separate panel. Inputs: Adjustable parameters for RSI length, Stoch length, and smoothing. You can tweak these in the settings panel. Calculations: Builds RSI, then Stoch RSI, then smooths into %K and %D lines. Signals: Defines buy (green) and sell (red) conditions based on crossovers and thresholds. Color logic: Dynamically changes the %K line color (green/red/gray). Plots: Draws %K (colored) and %D (blue) lines. Background shading: Adds light green/red shading when signals fire for easy visual scanning. Alerts: Pops up TradingView alerts when buy/sell conditions trigger, so you don’t miss them. ✅ Publishing Notes Paste this into a new blank Pine Script editor starting at line 1. Save and add it to your chart. You’ll see the %K line flip colors, background shading, and alerts firing when conditions are met.
مؤشر Pine Script®
من ‎diveregamboa1‎
1
Buy & Sell Arrows - MACD + Best_Solve WPRMACD + Best_Solve Williams %R – Aggressive Trend-Reversal Catcher (Allow Signals Even in Overbought/Oversold Zones) This indicator combines the classic MACD histogram with Best_Solve’s popular custom Williams %R (a 0–100 momentum oscillator that behaves more like a fast Stochastic) to deliver clean, high-conviction entry signals on daily (and higher) timeframes. Core Logic – Only TWO conditions are required BUY (large green arrow below bar) MACD histogram is green (bullish momentum) Williams %R fast line is crossing above OR already above its EMA SELL (large red arrow above bar) MACD histogram is red (bearish momentum) Williams %R fast line is crossing below OR already below its EMA Unlike most oscillators, this version deliberately removes the traditional “do not buy when overbought / do not sell when oversold” filters. This allows the script to catch powerful trend reversals and explosive moves immediately — even on violent earnings gaps or panic sell-offs (example: META’s -11 % drop on Oct 30 2025 triggered an instant sell even though %R was deeply oversold). Built-in Clean-Signal Logic No consecutive buys or sells — each new signal must be preceded by the opposite direction. This keeps the chart extremely clean and prevents whipsaw clusters during strong trends. Best Use Cases Daily and 4H swing trading on stocks, indices, crypto, forex Excellent for catching sharp reversals after earnings, news events, or overextended moves Works especially well on high-beta names and growth stocks Visuals Large green/red arrows with “BUY” / “SELL” text (your favorite style) Subtle transparent MACD histogram overlaid on price for instant momentum context Ready-to-use alerts (“Buy Alert” / “Sell Alert”) Set it, alert it, trade it — one of the cleanest and most responsive daily reversal systems you’ll find. Enjoy the edge!
مؤشر Pine Script®
من ‎rodb_2025‎
Bayesian Liquidity Pain & Gain [Instit. Vol Weighted]Bayesian Liquidity Pain & Gain Indicator Stop guessing where support and resistance are. The Bayesian Liquidity Pain & Gain indicator moves beyond arbitrary lines and raw price action. It quantifies Institutional Intent by calculating the exact price levels where large volume has been accumulated and visualizes the "Pain" (stress) those participants feel when the market moves against them. The Logic: Quantified Institutional Stress Institutions don't trade single candles; they accumulate positions over time. This indicator tracks their Volume-Weighted Average Cost Basis to answer two critical questions: Where did they enter? (The Cost Basis Lines) Are they underwater? (The Pain Clouds) By normalizing price distance using volatility (ATR) and statistical deviation (Z-Score), we filter out noise and only highlight zones where "Smart Money" is statistically forced to defend their positions or capitulate. How to Read the Chart 1. The Cost Basis Lines (Anchors) • 🟢 Green Line (Buyer Cost Basis): The average price where institutions accumulated long positions. This acts as dynamic Support. • 🔴 Red Line (Seller Cost Basis): The average price where institutions accumulated short positions. This acts as dynamic Resistance. 2. The Pain Clouds (Signals) When price moves significantly away from the cost basis (Z-Score > 2.0), "Clouds" appear to visualize the PnL status of the participants: • 🔴 Red Cloud (Buyer Pain): Price is below the buyer's entry. Buyers are losing money (in the red). This creates a "Discount" zone where they may defend support. • 🟢 Green Cloud (Seller Pain): Price is above the seller's entry. Sellers are losing money (shorts are squeezed). This indicates strong bullish momentum. 3. The Multi-Timeframe Dashboard A real-time HUD showing the Z-Score status across 4 timeframes (1m, 5m, 15m, 1h): • 🟢 Green: Profitable/Neutral (Trend Continuation) • 🟠 Orange: Warning (Pressure Building) • 🔴 Red: Critical Pain (High Probability Reversal) Trading Strategies Setup 1: The Defensive Bounce (Long) • Context: Price drops into a 🔴 Red Cloud (Buyer Pain). • Trigger: Price touches the 🟢 Green Line (Buyer Cost Basis) and shows a rejection wick. • Logic: Institutional buyers defend their cost basis to avoid realizing losses. Setup 2: The Short Squeeze (Momentum) • Context: Price rallies into a 🟢 Green Cloud (Seller Pain). • Trigger: Price holds above the 🔴 Red Line (Seller Cost Basis). • Logic: Short sellers are trapped and forced to buy back (cover), fueling the rally. Fractal Alignment: For high-conviction trades, wait for the Dashboard to show "Pain" signals on both the 1h (Anchor) and 5m (Trigger) timeframes simultaneously. Settings • Memory Length (Default 144): The lookback period for the institutional cost basis. Increase for swing trading, decrease for scalping. • Sigma Threshold (Default 2.0): The statistical confidence level for "Pain". Higher values = fewer, stronger signals. • Volume Amp: When enabled, high volume amplifies the pain signal, giving more weight to institutional footprints.
مؤشر Pine Script®
من ‎nnfuzzy‎
MAMA - FAMA (Ehlers) [KN]MAMA - FAMA (Ehlers) Surprisingly, I couldn't find a proper Pine Script implementation of this classic indicator on TradingView, so here's my version. This indicator implements John Ehlers' MESA Adaptive Moving Average (MAMA) and Following Adaptive Moving Average (FAMA) from his book "Rocket Science for Traders." How It Works Unlike traditional moving averages with fixed periods, MAMA adapts its smoothing based on the market's dominant cycle. It uses the Hilbert Transform to measure the instantaneous phase of price, then adjusts its responsiveness according to how fast that phase is changing. When price is trending strongly (rapid phase change), MAMA speeds up to follow closely. During consolidation (slow phase change), it slows down to filter noise. FAMA is a further smoothed version of MAMA that serves as a signal line. Signals 🔵 Bullish : MAMA crosses above FAMA 🟠 Bearish : MAMA crosses below FAMA The adaptive nature makes this particularly effective at avoiding whipsaws during ranging markets while still catching trends early. Inputs - Fast Limit (default 0.5): Maximum alpha, controls fastest response - Slow Limit (default 0.05): Minimum alpha, controls slowest response - Source (default hl2): Price input Credits Original concept by John F. Ehlers.
مؤشر Pine Script®
من ‎KatherinaNote‎
Auto Reaction Zones (XAUUSD) ✅ Auto Reaction Zones (XAUUSD) OANDA:XAUUSD Auto Reaction Zones (XAUUSD) is an advanced supply & demand mapping tool designed to detect high-probability reaction zones using price impulses, volatility filters, market structure, and adaptive confirmation logic. This indicator automatically identifies strong bullish and bearish reaction bases formed before impulsive movements, then plots dynamic demand and supply zones that help traders anticipate future reactions, reversals, or continuation points. 🔍 Core Features ▪ Automatic Supply & Demand Zone Detection Identifies zones based on structural breakout impulses using ATR-based thresholds, volume confirmation, and validated base levels. ▪ Adaptive Confirmation Distance (ADR-Based) The zone becomes active/confirmed only after price moves a configurable number of points. A unique 3-case ADR logic adjusts the required confirmation distance based on current market volatility: Case 1: Low ADR → smaller confirmation required Case 2: Moderate ADR → medium confirmation Case 3: High ADR → higher confirmation (more filtering) This ensures stronger zones in high-volatility conditions (e.g., XAUUSD). ▪ Smart Zone Management Automatic extension until tested or consumed Optional lifetime limits (bars or days) Auto-delete unconfirmed zones if price violates them too early Hide tested or consumed zones for a cleaner chart ▪ Adjustable Zone Size Filtering Option to enforce a minimum or maximum zone size, useful for cleaning noise and ultra-small reaction levels. ▪ ADR-Based Zone Spacing Filter Prevents the creation of zones that are too close to each other. Different spacing rules for same-direction and opposite-direction zones. ▪ Multi-Timeframe Mode Overlay zones detected from higher timeframes directly onto your current chart. ▪ Directional Bias (EMA Filter) Optionally restrict long/short zones based on EMA trend alignment. ▪ Real-Time Alerts Receive alerts when price touches any active zone or only fresh zones. 🎯 Why This Indicator Is Different Unlike typical supply/demand indicators that print every swing, Auto Reaction Zones focuses on: Only strong reaction bases Only valid impulse-generated levels Only zones confirmed by price movement Only zones that respect volatility and minimum spacing rules This results in cleaner charting, fewer false zones, and far more reliable reaction levels, especially on volatile instruments like XAUUSD. ⚠️ Disclaimer This tool is not financial advice. Always combine zone analysis with broader market context and risk management.
مؤشر Pine Script®
من ‎Devil2171‎
Multi-Pivot Plotter//================================================================================ //📌 Manual Pivot Plotter (4 Sets: P, R1–R3, S1–S3) // - Up to 4 indices // - Each index: Name + P/S/R values // - One shared Style block: colors, visibility, line width (applies to all indices) // - Lines start at 00:00 UTC+8 and extend a few bars // - Labels at line end or start, with optional "Index Name" and price value //================================================================================
مؤشر Pine Script®
من ‎Raj7rader‎
NEXFEL – Quantum Adaptive MACD System v2.0# NEXFEL – Quantum Adaptive MACD System v2.0 ## 📌 Overview The **NEXFEL – Quantum Adaptive MACD System v2.0** is an advanced, fully integrated decision-support tool built upon an enhanced adaptive MACD engine. Unlike traditional MACD implementations that rely on fixed parameters, this system uses **R² correlation** to dynamically adjust sensitivity based on current market behavior. This indicator **does not simply merge tools**; it unifies: - Adaptive MACD calculation - Multi-timeframe sentiment (1H + 4H) - Market regime detection - Volume confirmation - Confidence scoring (0–100%) - ATR stop-loss visualization - Session filtering - Daily trade limit control into a **single coherent trading framework**. This publication replaces my previous “Adaptive MACD Flow PRO”, as this version is a complete rewrite with new logic, improved structure, and expanded analytical capabilities. --- ## ⚙️ How It Works ### **1. Adaptive MACD Core (R²-Based)** The MACD sensitivity is adjusted using R² correlation: - High R² → smoother & more stable response - Low R² → more reactive & faster response This adaptation allows the oscillator to naturally adjust to different volatility environments. --- ### **2. Multi-Timeframe Sentiment** The system analyzes: - **1H EMAs (10/30)** - **4H EMAs (20/50)** A directional sentiment score is generated, allowing signals only when the local timeframe aligns with the higher timeframe structure. --- ### **3. Market Regime Detection** The indicator identifies whether the market is: - **TRENDING** - **RANGING** - **NEUTRAL** Signals are validated or filtered depending on the active regime. --- ### **4. Confidence Scoring System (0–100%)** The signal quality is measured by weighting: - Momentum - Volume confirmation - Market regime compatibility - Multi-timeframe alignment - Local trend direction - Short-term momentum Only **high-confidence** conditions produce the safest BUY/SELL signals. --- ### **5. ATR Stop-Loss Visualization** Dynamic stop levels are displayed using: - ATR × multiplier A visual reference for risk management without executing trades. --- ### **6. Daily Trade Limit Control** To prevent overtrading, the system tracks daily signals and restricts new ones once a limit is reached. --- ### **7. Multi-Language Interface** The panel can display: - **English** - **Portuguese** depending on user selection. (TradingView requires English as the primary language, which is why it appears first in this description.) --- ## 👤 Who This Script Is For - Traders seeking a more reliable and adaptive MACD - Scalpers who prefer high-confirmation entries - Swing traders analyzing market regimes - Users needing a clean, objective analytical panel --- ## ⚠️ Important This indicator does **not** execute trades and does not guarantee results. It is a **decision-support system**, not a trading bot. # 📝 Author’s Notes This version is a complete redesign of my previous indicator. All components were rebuilt, expanded, and optimized to offer a more structured and reliable trading system.
مؤشر Pine Script®
من ‎FellGMS‎
VWAP + EMA9/21/50 + Ichimoku + RSI (M5) - Strict + TPSL//@version=5 indicator("VWAP + EMA9/21/50 + Ichimoku + RSI (M5) - Strict + TPSL", overlay=true, shorttitle="VWAP_EMA_ICH_RSI_TPSL") // === Inputs === emaFastLen = input.int(9, "EMA Fast (9)") emaMidLen = input.int(21, "EMA Mid (21)") emaSlowLen = input.int(50, "EMA Slow (50)") // Ichimoku inputs tenkanLen = input.int(9, "Tenkan Sen Length") kijunLen = input.int(26, "Kijun Sen Length") senkouBLen = input.int(52, "Senkou B Length") displacement = input.int(26, "Displacement") // RSI rsiLen = input.int(14, "RSI Length") rsiThreshold = input.int(50, "RSI Threshold") // VWAP option useSessionVWAP = input.bool(true, "Use Session VWAP (true) / Daily VWAP (false)") // Volume filter useVolumeFilter = input.bool(true, "Enable Volume Filter") volAvgLen = input.int(20, "Volume Avg Length") volMultiplier = input.float(1.2, "Min Volume > avg *", step=0.1) // Higher timeframe trend check useHTF = input.bool(true, "Enable Higher-Timeframe Trend Check") htfTF = input.string("60", "HTF timeframe (e.g. 60, 240, D)") // Alerts / webhook alertOn = input.bool(true, "Enable Alerts") useWebhook = input.bool(true, "Send webhook on alerts") webhookURL = input.string("", "Webhook URL (leave blank to set in alert)") // TP/SL & Trailing inputs useTP = input.bool(true, "Enable Take Profit (TP)") tpTypeRR = input.bool(true, "TP as Risk-Reward ratio (true) / Fixed points (false)") tpRR = input.float(1.5, "TP RR (e.g. 1.5)", step=0.1) fixedTPpts = input.float(40.0, "Fixed TP (ticks/pips) if not RR") useSL = input.bool(true, "Enable Stop Loss (SL)") slTypeATR = input.bool(true, "SL as ATR-based (true) / Fixed points (false)") atrLen = input.int(14, "ATR Length") atrMult = input.float(1.5, "ATR Multiplier for SL", step=0.1) fixedSLpts = input.float(20.0, "Fixed SL (ticks/pips) if not ATR") useTrailing = input.bool(true, "Enable Trailing Stop") trailType = input.string("ATR", "Trailing type: ATR or EMA", options= ) // "ATR" or "EMA" trailATRmult = input.float(1.0, "Trailing ATR Multiplier", step=0.1) trailEMAlen = input.int(9, "Trailing EMA Length (if EMA chosen)") trailLockInPts = input.float(5.0, "Trail lock-in (min profit before trail active, pts)") // Other showArrows = input.bool(true, "Show Entry Arrows") // === Calculations === ema9 = ta.ema(close, emaFastLen) ema21 = ta.ema(close, emaMidLen) ema50 = ta.ema(close, emaSlowLen) // VWAP vwapVal = ta.vwap // Ichimoku highestHighTenkan = ta.highest(high, tenkanLen) lowestLowTenkan = ta.lowest(low, tenkanLen) tenkan = (highestHighTenkan + lowestLowTenkan) / 2 highestHighKijun = ta.highest(high, kijunLen) lowestLowKijun = ta.lowest(low, kijunLen) kijun = (highestHighKijun + lowestLowKijun) / 2 highestHighSenkouB = ta.highest(high, senkouBLen) lowestLowSenkouB = ta.lowest(low, senkouBLen) senkouB = (highestHighSenkouB + lowestLowSenkouB) / 2 senkouA = (tenkan + kijun) / 2 // RSI rsi = ta.rsi(close, rsiLen) // Volume volAvg = ta.sma(volume, volAvgLen) volOk = not useVolumeFilter or (volume > volAvg * volMultiplier) // Higher timeframe trend values htf_close = request.security(syminfo.tickerid, htfTF, close) htf_ema50 = request.security(syminfo.tickerid, htfTF, ta.ema(close, emaSlowLen)) htf_rsi = request.security(syminfo.tickerid, htfTF, ta.rsi(close, rsiLen)) htf_bull = htf_close > htf_ema50 htf_bear = htf_close < htf_ema50 htf_ok = not useHTF or (htf_bull and close > ema50) or (htf_bear and close < ema50) // Trend filters (on current timeframe) priceAboveVWAP = close > vwapVal priceAboveEMA50 = close > ema50 priceAboveCloud = close > senkouA and close > senkouB bullTrend = priceAboveVWAP and priceAboveEMA50 and priceAboveCloud bearTrend = not priceAboveVWAP and not priceAboveEMA50 and not priceAboveCloud // Pullback detection (price near EMA21 within tolerance) tolPerc = input.float(0.35, "Pullback tolerance (%)", step=0.05) / 100.0 nearEMA21 = math.abs(close - ema21) <= ema21 * tolPerc // Entry conditions emaCrossUp = ta.crossover(ema9, ema21) emaCrossDown = ta.crossunder(ema9, ema21) longConditionBasic = bullTrend and (nearEMA21 or close >= vwapVal) and emaCrossUp and rsi > rsiThreshold shortConditionBasic = bearTrend and (nearEMA21 or close <= vwapVal) and emaCrossDown and rsi < rsiThreshold longCondition = longConditionBasic and volOk and htf_ok and (not useHTF or htf_bull) and (rsi > rsiThreshold) shortCondition = shortConditionBasic and volOk and htf_ok and (not useHTF or htf_bear) and (rsi < rsiThreshold) // More strict: require Tenkan > Kijun for bull and Tenkan < Kijun for bear ichimokuAlign = (tenkan > kijun) ? 1 : (tenkan < kijun ? -1 : 0) longCondition := longCondition and (ichimokuAlign == 1) shortCondition := shortCondition and (ichimokuAlign == -1) // ATR for SL / trailing atr = ta.atr(atrLen) // --- Trade management state variables --- var float activeLongEntry = na var float activeShortEntry = na var float activeLongSL = na var float activeShortSL = na var float activeLongTP = na var float activeShortTP = na var float activeLongTrail = na var float activeShortTrail = na // Function to convert fixed points to price (assumes chart in points as price units) fixedToPriceLong(p) => p fixedToPriceShort(p) => p // On signal, set entry, SL and TP if longCondition activeLongEntry := close // SL if useSL if slTypeATR activeLongSL := close - atr * atrMult else activeLongSL := close - fixedToPriceLong(fixedSLpts) else activeLongSL := na // TP if useTP if tpTypeRR and useSL and not na(activeLongSL) risk = activeLongEntry - activeLongSL activeLongTP := activeLongEntry + risk * tpRR else activeLongTP := activeLongEntry + fixedToPriceLong(fixedTPpts) else activeLongTP := na // reset short activeShortEntry := na activeShortSL := na activeShortTP := na // init trailing activeLongTrail := activeLongSL if shortCondition activeShortEntry := close if useSL if slTypeATR activeShortSL := close + atr * atrMult else activeShortSL := close + fixedToPriceShort(fixedSLpts) else activeShortSL := na if useTP if tpTypeRR and useSL and not na(activeShortSL) riskS = activeShortSL - activeShortEntry activeShortTP := activeShortEntry - riskS * tpRR else activeShortTP := activeShortEntry - fixedToPriceShort(fixedTPpts) else activeShortTP := na // reset long activeLongEntry := na activeLongSL := na activeLongTP := na // init trailing activeShortTrail := activeShortSL // Trailing logic (update only when in profit beyond 'lock-in') if not na(activeLongEntry) and useTrailing // current unrealized profit in points currProfitPts = close - activeLongEntry if currProfitPts >= trailLockInPts // declare candidate before use to avoid undeclared identifier errors float candidate = na if trailType == "ATR" candidate := close - atr * trailATRmult else candidate := close - ta.ema(close, trailEMAlen) // move trail stop up but never below initial SL activeLongTrail := math.max(nz(activeLongTrail, activeLongSL), candidate) // ensure trail never goes below initial SL if SL exists if useSL and not na(activeLongSL) activeLongTrail := math.max(activeLongTrail, activeLongSL) // update SL to trailing activeLongSL := activeLongTrail if not na(activeShortEntry) and useTrailing currProfitPtsS = activeShortEntry - close if currProfitPtsS >= trailLockInPts // declare candidateS before use float candidateS = na if trailType == "ATR" candidateS := close + atr * trailATRmult else candidateS := close + ta.ema(close, trailEMAlen) activeShortTrail := math.min(nz(activeShortTrail, activeShortSL), candidateS) if useSL and not na(activeShortSL) activeShortTrail := math.min(activeShortTrail, activeShortSL) activeShortSL := activeShortTrail // Detect TP/SL hits (for plotting & alerts) longTPHit = not na(activeLongTP) and close >= activeLongTP longSLHit = not na(activeLongSL) and close <= activeLongSL shortTPHit = not na(activeShortTP) and close <= activeShortTP shortSLHit = not na(activeShortSL) and close >= activeShortSL if longTPHit or longSLHit // reset long state after hit activeLongEntry := na activeLongSL := na activeLongTP := na activeLongTrail := na if shortTPHit or shortSLHit activeShortEntry := na activeShortSL := na activeShortTP := na activeShortTrail := na // Plot EMAs p_ema9 = plot(ema9, title="EMA9", linewidth=1) plot(ema21, title="EMA21", linewidth=1) plot(ema50, title="EMA50", linewidth=2) // Plot VWAP plot(vwapVal, title="VWAP", linewidth=2, style=plot.style_line) // Plot Ichimoku lines (Tenkan & Kijun) plot(tenkan, title="Tenkan", linewidth=1) plot(kijun, title="Kijun", linewidth=1) // Plot cloud (senkouA & senkouB shifted forward) plot(senkouA, title="Senkou A", offset=displacement, transp=60) plot(senkouB, title="Senkou B", offset=displacement, transp=60) fill(plot(senkouA, offset=displacement), plot(senkouB, offset=displacement), color = senkouA > senkouB ? color.new(color.green, 80) : color.new(color.red, 80)) // Plot active trade lines plotshape(not na(activeLongEntry), title="Active Long", location=location.belowbar, color=color.new(color.green, 0), style=shape.circle, size=size.tiny) plotshape(not na(activeShortEntry), title="Active Short", location=location.abovebar, color=color.new(color.red, 0), style=shape.circle, size=size.tiny) plot(activeLongSL, title="Long SL", color=color.red, linewidth=2) plot(activeLongTP, title="Long TP", color=color.green, linewidth=2) plot(activeShortSL, title="Short SL", color=color.red, linewidth=2) plot(activeShortTP, title="Short TP", color=color.green, linewidth=2) // Arrows / labels if showArrows if longCondition label.new(bar_index, low, "BUY", style=label.style_label_up, color=color.green, textcolor=color.white, size=size.small) if shortCondition label.new(bar_index, high, "SELL", style=label.style_label_down, color=color.red, textcolor=color.white, size=size.small) // Alerts // alertcondition must be declared in global scope so TradingView can create alerts from them alertcondition(longCondition, "VWAP+EMA+Ichimoku+RSI — BUY (STRICT)", "BUY signal from VWAP+EMA+Ichimoku+RSI (STRICT)") alertcondition(shortCondition, "VWAP+EMA+Ichimoku+RSI — SELL (STRICT)", "SELL signal from VWAP+EMA+Ichimoku+RSI (STRICT)") // Runtime alerts (still use alert() to trigger immediate alerts; webhook is added in TradingView Alert dialog) if alertOn if longCondition alert("VWAP+EMA+Ichimoku+RSI — BUY (STRICT)", alert.freq_once_per_bar_close) if shortCondition alert("VWAP+EMA+Ichimoku+RSI — SELL (STRICT)", alert.freq_once_per_bar_close) // Alerts for TP/SL hits if longTPHit alert("LONG TP HIT", alert.freq_once_per_bar_close) if longSLHit alert("LONG SL HIT", alert.freq_once_per_bar_close) if shortTPHit alert("SHORT TP HIT", alert.freq_once_per_bar_close) if shortSLHit alert("SHORT SL HIT", alert.freq_once_per_bar_close) // Info table var table info = table.new(position.top_right, 1, 8) if barstate.islast table.cell(info, 0, 0, text = 'Trend: ' + (bullTrend ? 'Bull' : bearTrend ? 'Bear' : 'Neutral')) table.cell(info, 0, 1, text = 'EMA9/21/50: ' + str.tostring(ema9, format.mintick) + ' / ' + str.tostring(ema21, format.mintick) + ' / ' + str.tostring(ema50, format.mintick)) table.cell(info, 0, 2, text = 'VWAP: ' + str.tostring(vwapVal, format.mintick)) table.cell(info, 0, 3, text = 'RSI: ' + str.tostring(rsi, format.mintick)) table.cell(info, 0, 4, text = 'Vol OK: ' + (volOk ? 'Yes' : 'No')) table.cell(info, 0, 5, text = 'HTF: ' + htfTF + ' ' + (htf_bull ? 'Bull' : htf_bear ? 'Bear' : 'Neutral')) table.cell(info, 0, 6, text = 'ActiveLong: ' + (not na(activeLongEntry) ? 'Yes' : 'No')) table.cell(info, 0, 7, text = 'ActiveShort: ' + (not na(activeShortEntry) ? 'Yes' : 'No')) // End of script
مؤشر Pine Script®
من ‎zakiemn‎
Crypto Anchored VWAP (Swing High/Low)Crypto Anchored VWAP (Swing High/Low) This indicator provides an automatic Anchored VWAP system designed specifically for highly volatile assets such as cryptocurrencies (ETH, BTC, SOL, etc.). Unlike traditional AVWAP tools that require manual date input, this script automatically anchors VWAP to the most recent swing high and swing low, making it ideal for real-time trend tracking and intraday/4H structure analysis. How It Works The script detects local swing lows and swing highs based on user-defined swing length. When a new swing point appears, an Anchored VWAP is initialized from that specific candle. As price evolves, the AVWAP dynamically becomes: A trend boundary A fair-value line A mean-reversion attractor Traders can use these levels to identify: Trend continuation Breakout confirmation Mean reversion pullbacks Overextended expansions Included Features ✔ Auto-Anchored VWAP from swing low ✔ Auto-Anchored VWAP from swing high ✔ Standard deviation bands (1σ) for volatility context ✔ Designed for Crypto 4H / 1H / 15m ✔ Works on any asset & any timeframe How To Use 1. Trend Direction Price above Swing-Low VWAP → Bullish bias Price below Swing-High VWAP → Bearish bias 2. Trade Setups Break → Retest → Hold above AVWAP = Trend continuation long Reject from AVWAP / σ band = Mean-reversion short setup AVWAP zone → High probability liquidity reaction 3. Volatility Bands Price touching +1σ = extension Price returning to 0σ = mean reversion Price breaking −1σ = trend weakening Inputs Swing Length: determines sensitivity of swing high/low detection (Default: 5) Best Use Cases ETH 4H trend following BTC structure shifts Altcoin volatility filtering Identifying institutional "cost basis" zones Confirming breakouts / fakeouts Notes This is not a trading system by itself but a structural tool meant to help traders understand trend and value location. Always combine AVWAP with market structure, volume, and risk management. Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any asset. Use at your own discretion.
مؤشر Pine Script®
من ‎Veigar‎
Minho Index | SETUP (Safe Filter 90%)//@version=5 indicator("Minho Index | SETUP (Safe Filter 90%)", shorttitle="Minho Index | SETUP+", overlay=false) //-------------------------------------------------------- // ⚙️ INPUTS //-------------------------------------------------------- bullColor = input.color(color.new(color.lime, 0), "Bull Color (Minho Green)") bearColor = input.color(color.new(color.red, 0), "Bear Color (Red)") neutralColor = input.color(color.new(color.white, 0), "Neutral Color (White)") lineWidth = input.int(2, "Line Width") period = input.int(14, "RSI Period") centerLine = input.float(50.0, "Central Line (Fixed at 50)") //-------------------------------------------------------- // 🧠 BASE RSI + INTERNAL SMOOTHING //-------------------------------------------------------- rsiBase = ta.rsi(close, period) rsiSmooth = ta.sma(rsiBase, 3) // light smoothing //-------------------------------------------------------- // 🔍 TREND DETECTION AND NEUTRAL ZONE //-------------------------------------------------------- trendUp = (rsiSmooth > rsiSmooth ) and (rsiSmooth > rsiSmooth ) trendDown = (rsiSmooth < rsiSmooth ) and (rsiSmooth < rsiSmooth ) slopeUp = (rsiSmooth > rsiSmooth ) slopeDown = (rsiSmooth < rsiSmooth ) lineColor = neutralColor if trendUp lineColor := bullColor else if trendDown lineColor := bearColor else if slopeUp or slopeDown lineColor := neutralColor //-------------------------------------------------------- // 📈 MAIN INDEX LINE //-------------------------------------------------------- plot(rsiSmooth, title="Dynamic RSI Line (Safe Filter)", color=lineColor, linewidth=lineWidth) //-------------------------------------------------------- // ⚪ FIXED CENTRAL LINE //-------------------------------------------------------- plot(centerLine, title="Central Line (Highlight)", color=neutralColor, linewidth=1) //-------------------------------------------------------- // 📊 NORMALIZED MOVING AVERAGES (SMA20 and EMA20) //-------------------------------------------------------- SMA20 = ta.sma(close, 20) EMA20 = ta.ema(close, 20) // Normalization 0–100 minPrice = ta.lowest(low, 100) maxPrice = ta.highest(high, 100) rangeCalc = maxPrice - minPrice rangeCalc := rangeCalc == 0 ? 1 : rangeCalc normSMA = ((SMA20 - minPrice) / rangeCalc) * 100 normEMA = ((EMA20 - minPrice) / rangeCalc) * 100 //-------------------------------------------------------- // 🩶 MOVING AVERAGES PLOTS (GHOST-GREY STYLE) //-------------------------------------------------------- ghostColor = color.new(color.rgb(200,200,200), 65) plot(normSMA, title="SMA 20 (Ghost Grey)", color=ghostColor, linewidth=2) plot(normEMA, title="EMA 20 (Ghost Grey)", color=ghostColor, linewidth=2) //-------------------------------------------------------- // 🌈 FILL BETWEEN MOVING AVERAGES //-------------------------------------------------------- bullCond = normSMA < normEMA bearCond = normSMA > normEMA fill( plot(normSMA, display=display.none), plot(normEMA, display=display.none), color = bearCond ? color.new(color.red, 55) : bullCond ? color.new(color.lime, 55) : na ) //-------------------------------------------------------- // ✅ END OF INDICATOR //--------------------------------------------------------
مؤشر Pine Script®
من ‎traderminho‎
Minho Index | SETUP+@TraderMinho//@version=5 // By: Trader Minho — Analista Gráfico desde 2022 indicator("Minho Index | SETUP+@TraderMinho", shorttitle="Minho Index (Classic)", overlay=false) //-------------------------------------------------------- // PARAMETERS //-------------------------------------------------------- shortPeriod = input.int(3, "Short Period") mediumPeriod = input.int(8, "Medium Period") longPeriod = input.int(20, "Long Period") intensityFactor = input.float(3.0, "Intensity Factor", step = 0.1) shortSmoothing = input.int(2, "Short Smoothing (EMA)") mediumSmoothing = input.int(5, "Medium Smoothing (EMA)") shortColor = input.color(color.new(#00CED1, 0), "Short Line Color (Aqua Blue)") mediumColor = input.color(color.new(#FFD700, 0), "Medium Line Color (Yellow)") zeroColor = input.color(color.new(color.white, 0), "Zero Line Color") lineWidth = input.int(1, "Line Thickness") //-------------------------------------------------------- // MOVING AVERAGE CALCULATIONS //-------------------------------------------------------- smaShort = ta.sma(close, shortPeriod) smaMedium = ta.sma(close, mediumPeriod) smaLong = ta.sma(close, longPeriod) //-------------------------------------------------------- // CLASSIC DIDI NORMALIZATION //-------------------------------------------------------- priceBase = ta.sma(close, longPeriod) didiShort = ((smaShort - smaLong) / priceBase) * intensityFactor didiMedium = ((smaMedium - smaLong) / priceBase) * intensityFactor //-------------------------------------------------------- // FINAL SMOOTHING (CLASSIC NEEDLE EFFECT) //-------------------------------------------------------- aquaSmooth = ta.ema(didiShort, shortSmoothing) yellowSmooth = ta.ema(didiMedium, mediumSmoothing) //-------------------------------------------------------- // PLOTS //-------------------------------------------------------- hline(0, "Zero Line", color = zeroColor, linewidth = 1) plot(aquaSmooth, "Short (Aqua)", color = shortColor, linewidth = lineWidth) plot(yellowSmooth, "Medium (Yellow)", color = mediumColor, linewidth = lineWidth)
مؤشر Pine Script®
من ‎traderminho‎
Obsidian Flux Matrix# Obsidian Flux Matrix | JackOfAllTrades Made with my Senior Level AI Pine Script v6 coding bot for the community! Narrative Overview Obsidian Flux Matrix (OFM) is an open-source Pine Script v6 study that fuses social sentiment, higher timeframe trend bias, fair-value-gap detection, liquidity raids, VWAP gravitation, session profiling, and a diagnostic HUD. The layout keeps the obsidian palette so critical overlays stay readable without overwhelming a price chart. Purpose & Scope OFM focuses on actionable structure rather than marketing claims. It documents every driver that powers its confluence engine so reviewers understand what triggers each visual. Core Analytical Pillars 1. Social Pulse Engine Sentiment Webhook Feed: Accepts normalized scores (-1 to +1). Signals only arm when the EMA-smoothed value exceeds the `sentimentMin` input (0.35 by default). Volume Confirmation: Requires local volume > 30-bar average × `volSpikeMult` (default 2.0) before sentiment flags. EMA Cross Validation: Fast EMA 8 crossing above/below slow EMA 21 keeps momentum aligned with flow. Momentum Alignment: Multi-timeframe momentum composite must agree (positive for longs, negative for shorts). 2. Peer Momentum Heatmap Multi-Timeframe Blend: RSI + Stoch RSI fetched via request.security() on 1H/4H/1D by default. Composite Scoring: Each timeframe votes +1/-1/0; totals are clamped between -3 and +3. Intraday Readability: Configurable band thickness (1-5) so scalpers see context without losing space. Dynamic Opacity: Stronger agreement boosts column opacity for quick bias checks. 3. Trend & Displacement Framework Dual EMA Ribbon: Cyan/magenta ribbon highlights immediate posture. HTF Bias: A higher-timeframe EMA (default 55 on 4H) sets macro direction. Displacement Score: Body-to-ATR ratio (>1.4 default) detects impulses that seed FVGs or VWAP raids. ATR Normalization: All thresholds float with volatility so the study adapts to assets and regimes. 4. Intelligent Fair Value Gap (FVG) System Gap Detection: Three-candle logic (bullish: low > high ; bearish: high < low ) with ATR-sized minimums (0.15 × ATR default). Overlap Prevention: Price-range checks stop redundant boxes. Spacing Control: `fvgMinSpacing` (default 5) avoids stacking from the same impulse. Storage Caps: Max three FVGs per side unless the user widens the limit. Session Awareness: Kill zone filters keep taps focused on London/NY if desired. Auto Cleanup: Boxes delete when price closes beyond their invalidation level. 5. VWAP Magnet + Liquidity Raid Engine Session or Rolling VWAP: Toggle resets to match intraday or rolling preferences. Equal High/Low Scanner: Looks back 20 bars by default for liquidity pools. Displacement Filter: ATR multiplier ensures raids represent genuine liquidity sweeps. Mean Reversion Focus: Signals fire when price displaces back toward VWAP following a raid. 6. Session Range Breakout System Initial Balance Tracking: First N bars (15 default) define the session box. Breakout Logic: Requires simultaneous liquidity spikes, nearby FVG activity, and supportive momentum. Z-Score Volume Filter: >1.5σ by default to filter noisy moves. 7. Lifestyle Liquidity Scanner Volume Z-Scores: 50-bar baseline highlights statistically significant spikes. Smart Money Footprints: Bottom-of-chart squares color-code buy vs sell participation. Panel Memory: HUD logs the last five raid timestamps, direction, and normalized size. 8. Risk Matrix & Diagnostic HUD HUD Structure: Table in the top-right summarizes HTF bias, sentiment, momentum, range state, liquidity memory, and current risk references. Signal Tags: Aggregates SPS, FVG, VWAP, Range, and Liquidity states into a compact string. Risk Metrics: Swing-based stops (5-bar lookback) + ATR targets (1.5× default) keep risk transparent. Signal Families & Alerts Social Pulse (SPS): Volume-confirmed sentiment alignment; triangle markers with “SPS”. Kill-Zone FVG: Session + HTF alignment + FVG tap; arrow markers plus SL/TP labels. Local FVG: Captures local reversals when HTF bias has not flipped yet. VWAP Raid: Equal-high/low raids that snap toward VWAP; “VWAP” label markers. Range Breakout: Initial balance violations with liquidity and imbalance confirmation; circle markers. Liquidity Spike: Z-score spikes ≥ threshold; square markers along the baseline. Visual Design & Customization Theme Palette: Primary background RGB (12,6,24). Accent shading RGB (26,10,48). Long accents RGB (88,174,255). Short accents RGB (219,109,255). Stylized Candles: Optional overlay using theme colors. Signal Toggles: Independently enable markers, heatmap, and diagnostics. Label Spacing: Auto-spacing enforces ≥4-bar gaps to prevent text overlap. Customization & Workflow Notes Adjust ATR/FVG thresholds when volatility shifts. Re-anchor sentiment to your webhook cadence; EMA smoothing (default 5) dampens noise. Reposition the HUD by editing the `table.new` coordinates. Use multiples of the chart timeframe for HTF requests to minimize load. Session inputs accept exchange-local time; align them to your market. Performance & Compliance Pure Pine v6: Single-line statements, no `lookahead_on`. Resource Safe: Arrays trimmed, boxes limited, `request.security` cached. Repaint Awareness: Signals confirm on close; alerts mirror on-chart logic. Runtime Safety: Arrays/loops guard against `na`. Use Cases Measure when social sentiment aligns with structure. Plan ICT-style intraday rebalances around session-specific FVG taps. Fade VWAP raids when displacement shows exhaustion. Watch initial balance breaks backed by statistical volume. Keep risk/target references anchored in ATR logic. Signal Logic Snapshot Social Pulse Long/Short: `sentimentEMA` gated by `sentimentMin`, `volSpike`, EMA 8/21 cross, and `momoComposite` sign agreement. Keeps hype tied to structural follow-through. Kill-Zone FVG Long/Short: Requires session filter, HTF EMA bias alignment, and an active FVG tap (`bullFvgTap` / `bearFvgTap`). Labels include swing stops + ATR targets pulled from `swingLookback` and `liqTargetMultiple`. Local FVG Long/Short: Uses `localBullish` / `localBearish` heuristics (EMA slope, displacement, sequential closes) to surface intraday reversals even when HTF bias has not flipped. VWAP Raids: Detect equal-high/equal-low sweeps (`raidHigh`, `raidLow`) that revert toward `sessionVwap` or rolling VWAP when displacement exceeds `vwapAlertDisplace`. Range Breakouts: Combine `rangeComplete`, breakout confirmation, liquidity spikes, and nearby FVG activity for statistically backed initial balance breaks. Liquidity Spikes: Volume Z-score > `zScoreThreshold` logs direction, size, and timestamp for the HUD and optional review workflows. Session Logic & VWAP Handling Kill zone + NY session inputs use TradingView’s session strings; `f_inSession()` drives both visual shading and whether FVG taps are tradeable when `killZoneOnly` is true. Session VWAP resets using cumulative price × volume sums that restart when the daily timestamp changes; rolling VWAP falls back to `ta.vwap(hlc3)` for instruments where daily resets are less relevant. Initial balance box (`rangeBars` input) locks once complete, extends forward, and stays on chart to contextualize later liquidity raids or breakouts. Parameter Reference Trend: `emaFastLen`, `emaSlowLen`, `htfResolution`, `htfEmaLen`, `showEmaRibbon`, `showHtfBiasLine`. Momentum: `tf1`, `tf2`, `tf3`, `rsiLen`, `stochLen`, `stochSmooth`, `heatmapHeight`. Volume/Liquidity: `volLookback`, `volSpikeMult`, `zScoreLen`, `zScoreThreshold`, `equalLookback`. VWAP & Sessions: `vwapMode`, `showVwapLine`, `vwapAlertDisplace`, `killSession`, `nySession`, `showSessionShade`, `rangeBars`. FVG/Risk: `fvgMinTicks`, `fvgLookback`, `fvgMinSpacing`, `killZoneOnly`, `liqTargetMultiple`, `swingLookback`. Visualization Toggles: `showSignalMarkers`, `showHeatmapBand`, `showInfoPanel`, `showStylizedCandles`. Workflow Recipes Kill-Zone Continuation: During the defined kill session, look for `killFvgLong` or `killFvgShort` arrows that line up with `sentimentValid` and positive `momoComposite`. Use the HUD’s risk readout to confirm SL/TP distances before entering. VWAP Raid Fade: Outside kill zone, track `raidToVwapLong/Short`. Confirm the candle body exceeds the displacement multiplier, and price crosses back toward VWAP before considering reversions. Range Break Monitor: After the initial balance locks, mark `rangeBreakLong/Short` circles only when the momentum band is >0 or <0 respectively and a fresh FVG box sits near price. Liquidity Spike Review: When the HUD shows “Liquidity” timestamps, hover the plotted squares at chart bottom to see whether spikes were buy/sell oriented and if local FVGs formed immediately after. Metadata Author: officialjackofalltrades Platform: TradingView (Pine Script v6) Category: Sentiment + Liquidity Intelligence Hope you Enjoy!
مؤشر Pine Script®
من ‎officialjackofalltrades‎
alertable spaceman v2slight modification to Key Levels SpacemanBTC IDWM script credit: spacemanbtc this is a new version to fix a bug that would pop unwanted alerts on certain levels. I realised the issue was how tradingview handles time. in tradingview,1D paints a new candle at 7pm NY time, but in low timeframe, the "next" day doesn't officially start until 12a.m, like a military clock would. this would cause some repainting issues. implemented some changes by using stable values that would hopefully circumvent that. script is open sourced in case anyone wants to use it to make changes in case there are other issues
مؤشر Pine Script®
من ‎leeegambit‎
SMC Pre-Trade Checklist (Mozzys)Here is a **clean, professional description** you can use when publishing your TradingView script. It clearly explains what the indicator does and why traders use it—perfect for the public library. --- # **📌 Script Description (for Publishing)** **SMC Pre-Trade Checklist (Compact Edition)** This indicator provides a **smart, compact on-chart checklist** designed for traders who use **Smart Money Concepts (SMC)**. Instead of guessing or rushing entries, the checklist helps you confirm the essential SMC conditions *before* taking a trade. The checklist displays as a **small 3-column panel** in the corner of your chart, making it easy to scan without covering price action. All items are controlled through indicator settings, where you can tick each condition as you validate it in your analysis. --- ## **🔥 What This Tool Helps You Do** This script helps you stay disciplined by verifying the core components of an SMC setup: ### **1. Higher-Timeframe (HTF) Bias** * Market direction clarity * Premium vs. discount zones * HTF POIs and liquidity targets ### **2. Liquidity Conditions** * Liquidity sweeps * Liquidity-based take-profit targets ### **3. Market Structure** * BOS/CHOCH confirmation * Displacement * Clean pullback into POI ### **4. Entry Validation** * Quality POI * LTF confirmation * Logical SL/TP and RR ### **5. Risk Management** * Correct position sizing * Avoiding high-impact news * Spread/volatility conditions ### **6. Trader Discipline** * Trade matches your model * No revenge or emotional trading --- ## **🎯 Why Traders Love This** Most losses come from **breaking rules**, not market randomness. This checklist forces consistency, clarity, and patience—especially in fast environments like FX, indices, and crypto. * Prevents emotional entries * Reduces impulsive trades * Keeps you aligned with your SMC plan * Works with any strategy or SMC style * Clean, minimal, non-intrusive layout --- ## **📌 Features** * Compact 3-column layout * Customizable from the indicator settings * Works on all timeframes and assets * Zero chart clutter * Perfect for rule-based traders --- ## **🚀 Who This Indicator Is For** * SMC traders * ICT-style traders * Liquidity-based traders * Anyone who wants more discipline & consistency * Backtesters who want structured trade evaluation --
مؤشر Pine Script®
من ‎Mozzy12345‎
3-bar Swing Liquidity Grab📊 3-BAR SWING LIQUIDITY GRAB WHAT IT DOES Automatically detects 3-bar swing highs/lows and alerts you to liquidity grab moments — when price breaks structural levels to trigger stop-losses, then reverses. SIGNALS AT A GLANCE Signal What It Means Trade Idea SH 🟠▼ Swing High (Resistance) Reference level SL 🔵▲ Swing Low (Support) Reference level LQH 🔴❌ Fake break ABOVE resistance SHORT ⬇️ LQL 🟢❌ Fake break BELOW support LONG ⬆️ HOW TO TRADE IT Spot the trend — Is price going up or down? Wait for signal — LQL (green) in uptrend, LQH (red) in downtrend Enter on signal — Place order on that bar Stop Loss — Just outside the swing level Take Profit — At the next swing level SETTINGS EXPLAINED Swing length: 1 = 3-bar swing, 2 = 5-bar swing (use 1 for scalp, 2 for larger TF) Lookback bars: Time window to find liquidity grabs (10-20 for scalp, 50+ for position) Toggles: Show/hide swing markers and signals BEST ON THESE TIMEFRAMES TF Type Settings M5-M15 Scalp SL: 1, LB: 10-15 M15-H1 Intraday SL: 1, LB: 15-20 H1-H4 Swing SL: 1-2, LB: 20-50 D+ Position SL: 2, LB: 50+ KEY RULES ✅ DO: Trade signals aligned with major trend Always use stop loss Use 2-5% risk per trade Confirm with price action ❌ DON'T: Trade choppy/sideways markets Ignore the trend Chase signals Overtrade REAL EXAMPLE LONG Trade (LQL Signal): text Uptrend → Swing Low forms at 1.0950 → Price dips to 1.0930 (below SL) → Closes at 1.0955 (above SL) = GREEN ❌ (LQL) → BUY at 1.0960 → Stop Loss: 1.0920 → Take Profit: 1.1050 (previous Swing High) WORKS ON ✅ Crypto (Bitcoin, Ethereum, Altcoins) ✅ Forex (EUR/USD, GBP/USD, etc.) ✅ Stocks & Indices ✅ Commodities (Gold, Oil, etc.) Any asset, any timeframe, any market. DISCLAIMER This is a technical analysis tool, not financial advice. Past performance does not guarantee future results. Always use proper risk management and test on a demo account first.
مؤشر Pine Script®
من ‎arsenkam_‎
FCPO MASTER v6 – Sideway + Breakout + OB + FVG (TUPLE SAFE)TL;DR cepat 1. Gunakan M5 untuk entry & OB/FVG confirmation. 2. Gunakan M15 untuk confirm trend/false breakout. 3. Gunakan H1 untuk bias arah (overall market). 4. Entry hanya bila signal + OB/FVG/candle rejection (script buatkan). 5. SL 5–8 tick, TP 10–25 tick ikut setup (sideway vs breakout). 6. Follow checklist setiap trade — jangan lompat. ________________________________________ Setup awal (1–2 min) 1. Pasang script FCPO Sideway MASTER – OB + Imbalance + Confirmation di TradingView. 2. Timeframes: buka M5, M15, H1 (susun 3 chart atau 1 chart multi-timeframe). 3. Input default: ATR14, Breakout Buffer 5 tick, RangeLen 20, ADX14, TP12, SL8. (Kau boleh tweak nanti). 4. Aktifkan alerts pada BUY Confirm / SELL Confirm / Sideway Buy / Sideway Sell. ________________________________________ Step-by-step trading process 1) Mulakan dengan H1 — tentukan bias HTF • Lihat H1 untuk jawapan: Trend Up / Down / Sideway. • Rule ringkas: o ADX H1 > 20 + price above H1 EMA → bias Bull o ADX H1 > 20 + price below H1 EMA → bias Bear o ADX H1 < 20 → market HTF sideway (no strong bias) Kenapa: H1 bagi kau idea “kalau breakout pada M5, patut follow atau tolak”. ________________________________________ 2) Pergi ke M15 — confirm trend & valid breakout • M15 kena setuju dengan idea breakout. o Untuk strong breakout: M15 kena tunjuk candle close di atas/bawah range + volume naik. o Kalau M5 breakout tapi M15 tak setuju (M15 masih sideway) → treat as fakeout. Jangan masuk. ________________________________________ 3) M5 — cari entry & confirmation (OB/FVG + candle) • M5 adalah tempat kau buat keputusan masuk. • Tunggu script keluarkan Sideway Buy/Sell atau Breakout Buy/Sell. • CONFIRM entry mesti ada sekurang-kurangnya 1 dari: o Bull/Bear Order Block searah signal (script detect). o FVG / Imbalance zone dipenuhi & price retest. o Candle rejection (pinbar / bearish/bullish engulfing) pada zone. Jika tiada confirmation → no trade. ________________________________________ 4) Checklist sebelum tekan Buy/Sell (MUST) • H1 bias tidak melawan trade (prefer sama arah). • M15 confirm breakout / trend or neutral. • Script keluarkan signal (sideway or breakout). • OB or FVG atau candle rejection ada. • ATR kenaikan jika breakout (untuk breakout trade). • Volume spike jika breakout. • Risk:SL <= 2% akaun (position sizing). Kalau semua ticked → boleh entry. ________________________________________ 5) Setting SL / TP & position sizing • Sideway (scalp): SL = 5–8 tick, TP = 8–12 tick. • Breakout (trend): SL = 8–12 tick, TP = 15–25+ tick (trail later). • Position sizing: Risk per trade 1–2%. o Lot size = (Account Risk RM × 1 tick value) / (SL ticks × tickValue) — (kalau kau gunakan fixed tick value, adjust ikut lot). (Script tunjuk SL & TP label — follow itu.) ________________________________________ 6) Entry types • A. Sideway Reversal (M5) o Signal: Sideway Buy / Sideway Sell o Confirm: OB/FVG or rejection candle at range bottom/top o Trade: scalp target 8–12 tick, tight SL 5–8 tick • B. Breakout (M5 entry, M15 confirm) o Signal: Breakout Buy/Sell (Strong) o Confirm: ATR expanding + volume spike + M15 alignment o Trade: trend follow, TP 15–25 tick, trailing stop active • C. Retest Entry o Breakout happens, price returns to retest range / OB / FVG → wait for rejection candle then enter. Safer. ________________________________________ 7) Trailing & exit rules • Jika useTrail = true script plots trailing stop (ATR × multiplier). • Exit rules: 1. Hit TP → close. 2. Hit SL → close. 3. If trailing stop hit → close. 4. If opposing confirmed signal muncul (e.g., SELL confirm while long) → consider close early. 5. If H1 bias flips strongly vs trade → tighten stop or close. ________________________________________ 8) Multiple signals & scaling • Never add to losing position (no averaging down). • If want scale-in on confirmed trend: add 1 partial size after price moves +10–12 tick in favor and shows continuation candle + no bearish OB/FVG. • Keep aggregated risk within your max (2–3%). ________________________________________ 9) Example trade walkthrough (concrete) • RangeHigh = 4065, RangeLow = 4035 (contoh). • Market sideway M5. Case A — Sideway Sell: 1. Price touches 4064–4065, script shows sidewaySell. 2. Lihat OB: ada bear OB zone di 4062–4066 → confirm. 3. Candle rejection (bearish pinbar) muncul → enter SELL M5. 4. Set SL = 5 tick above rangeHigh = 4070, TP = 10 tick → 4055. 5. Trail jika price turun > 8 tick: aktifkan trailing. 6. Close at TP or trail/SL. Case B — Breakout Buy: 1. Price closes above 4065 + 5 tick buffer = 4070 on M5. Script shows trueBreakUp. 2. M15 shows candle close above M15 resistance + volume spike → confirm. 3. Enter BUY, SL = 8 tick below entry, TP initial 20 tick, trail with ATR×1.5. 4. Move stop to breakeven after +10 tick, scale out half at +12 tick, leave rest to trail. ________________________________________ 10) Journal & review • Semua trade: record entry time, TF, reason (which confirmations), SL/TP, result, lesson. • Weekly review: check which confirmation worked best (OB vs FVG vs candle) and tweak settings. ________________________________________ 11) Tweaks / optimisations cepat • Jika terlalu banyak false sideway signals → kurangkan touchDist ke 2 tick. • Kalau fakeout breakout banyak → tambah tickBuf ke 6–8. • Nak lebih konservatif → cuma trade breakout yang juga setuju M15. ________________________________________ 12) Alerts & execution (practical) • Pasang alert pada BUY Confirm / SELL Confirm (script). • Kalau kau guna broker yang support one-click order, siap sediakan template order (SL/TP default). • Kalau manual, bila alert masuk: buka M5, cepat confirm OB/FVG & candle rejection → entry. ________________________________________ Quick reference table (handy) • TF utama entry: M5 • Confirm mid-TF: M15 • Bias HTF: H1 • Sideway SL/TP: SL 5–8, TP 8–12 • Breakout SL/TP: SL 8–12, TP 15–25+ • Mandatory confirmation: (Script signal) + (OB or FVG or candle)
مؤشر Pine Script®
من ‎matlabu939‎
6-9 session & levels6-9 Session & Levels - Customizable Range Analysis Indicator Description: This indicator provides comprehensive session-based range analysis designed for intraday traders. It calculates and displays key levels based on a customizable session period (default 6:00-9:00 AM ET). Core Features: Session Tracking Monitors user-defined session times with timezone support Displays session open, high, and low levels Highlights session range with optional box visualization Shows previous day RTH (Regular Trading Hours: 9:30 AM - 4:00 PM) levels Range Levels 25%, 50%, and 75% range levels within the session Range deviations at 0.5x, 1.0x, and 2.0x multiples Fibonacci extension levels (customizable, default 1.33x and 1.66x) Optional fill zones between Fibonacci levels Time Zone Highlighting Marks the 9:40-9:50 AM period as a potential reversal zone Vertical lines with shading to identify key time windows Statistical Analysis Calculates mean and median extension levels based on historical sessions Displays statistics table showing current range, average range, range difference, and z-score Customizable sample size (1-100 sessions) for statistical calculations Option to anchor extensions from either session open or high/low points Input Settings Explained: Session Settings Levels Session Time: Define your session window in HHMM-HHMM format (default: 0600-0900) Time Zone: Choose from UTC, America/New_York, America/Chicago, America/Los_Angeles, Europe/London, or Asia/Tokyo Anchor Settings Show Session Anchor: Toggle the session anchor line (marks session open price at 6:00 AM) Anchor Style/Color/Width: Customize appearance (Solid/Dashed/Dotted, color, 1-4 width) Show Anchor Label: Display price label for the anchor Session Open Line: Similar options for the session open reference line Range Box Settings Show Range Box: Display a shaded rectangle highlighting the session high-to-low range Range Box Color: Set the box background color and transparency Range Levels (25%/50%/75%) Show Range Levels: Toggle all three intermediate levels on/off Individual Level Styling: Each level (25%, 50%, 75%) has its own color, style, and width settings Show Range Level Labels: Display price labels for each level Range Deviations Show Range Deviations: Toggle deviation levels on/off 0.5x/1.0x/2.0x Settings: Each deviation multiplier can be customized with its own color, line style (Solid/Dashed/Dotted), and width Show Range Deviation Labels: Display labels showing the deviation price levels Previous Day RTH Levels Show Previous RTH Levels: Display yesterday's regular trading hours high and low RTH High/Low Styling: Separate color, style, and width settings for each level Show Previous RTH Labels: Toggle price labels for RTH levels Time Zones Show 9:40-9:50 AM Zone: Highlight this specific time period with vertical lines and shading Zone Color: Set the background fill color for the time zone Zone Label Color/Text: Customize the label appearance and text Fibonacci Extension Settings Show Fibonacci Extensions: Toggle Fib levels on/off Fib Extension Color/Style/Width: Customize line appearance Show Fib Extension Labels: Display price labels Fib Ext Level 1/2: Set custom multipliers (default 1.33 and 1.66, range 0-5 in 0.1 increments) Show Fibonacci Fills: Display shaded zones between Fib levels Fib Fill Color: Customize the fill color and transparency Session High/Low Settings Show Session High/Low Lines: Display the actual session extremes Style/Color/Width: Customize line appearance Show Labels: Toggle price labels for high/low levels Extension Stats Settings Show Statistical Levels on Chart: Display mean and median extension levels based on historical data Extension Anchor Point: Choose whether to anchor from "Open" or "High/Low" of the session Number of Sessions for Statistics: Set sample size (1-100, default 60) for calculating averages Mean/Median High Extension: Separate styling for each statistical level (color, style, width) Mean/Median Low Extension: Separate styling for downside statistical levels Tables Show Statistics Table: Display a summary table with current range, average range, difference, z-score, and sample size Table Position: Choose from 9 positions (Bottom/Middle/Top + Center/Left/Right) Table Text Size: Select from Auto, Tiny, Small, Normal, Large, or Huge Display Settings Projection Offset: Number of bars to extend lines forward (default 24) Label Size: Choose from Tiny, Small, Normal, or Large Price Decimal Precision: Set decimal places for price labels (0-6) How It Works: The indicator tracks the specified session period and calculates the session's open, high, low, and range. At the end of the session (9:00 AM by default), it projects all configured levels forward for the trading day. The statistical features analyze the last N sessions (you choose the number) to calculate typical extension behavior from either the session open or the session high/low points. The z-score calculation helps identify whether the current session's range is normal, expanded, or contracted compared to recent history, allowing traders to adjust expectations for the rest of the day. Use Case: This indicator helps traders identify key support and resistance levels based on early session price action, understand current range context relative to historical averages, and spot potential reversal zones during specific time periods. Note: This indicator is for informational purposes only and does not constitute investment advice. Always perform your own analysis before making trading decisions.
مؤشر Pine Script®
من ‎lucymatos‎